Pull powerpc fixes from Michael Ellerman:

 - Fix arch_stack_walk_reliable(), used by live patching

 - Fix powerpc selftests to work with run_kselftest.sh

Thanks to Joe Lawrence and Petr Mladek.

* tag 'powerpc-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Fix emit_tests to work with run_kselftest.sh
  powerpc/stacktrace: Fix arch_stack_walk_reliable()

Pull nfsd fix from Chuck Lever:

 - Fix NFSv4 READ corner case

* tag 'nfsd-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  NFSD: Fix zero NFSv4 READ results when RQ_SPLICE_OK is not set

Pull smb client fix from Steve French:
 "Fix for password freeing potential oops (also for stable)"

* tag '6.6-rc3-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
  fs/smb/client: Reset password pointer to NULL

Pull smb server fixes from Steve French:
 "Two SMB3 server fixes for null pointer dereferences:

   - invalid SMB3 request case (fixes issue found in testing the read
     compound patch)

   - iovec error case in response processing"

* tag '6.6-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: check iov vector index in ksmbd_conn_write()
  ksmbd: return invalid parameter error response if smb2 request is invalid

Pull ceph fixes from Ilya Dryomov:
 "A series that fixes an involved 'double watch error' deadlock in RBD
  marked for stable and two cleanups"

* tag 'ceph-for-6.6-rc4' of https://github.com/ceph/ceph-client:
  rbd: take header_rwsem in rbd_dev_refresh() only when updating
  rbd: decouple parent info read-in from updating rbd_dev
  rbd: decouple header read-in from updating rbd_dev->header
  rbd: move rbd_dev_refresh() definition
  Revert "ceph: make members in struct ceph_mds_request_args_ext a union"
  ceph: remove unnecessary check for NULL in parse_longname()

Pull xfs fix from Chandan Babu:

 - fix for commit 68b957f6 ("xfs: load uncached unlinked inodes into
   memory on demand") which address review comments provided by Dave
   Chinner

* tag 'xfs-6.6-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix reloading entire unlinked bucket lists

Pull ATA fixes from Damien Le Moal:
 "A larger than usual set of fixes for 6.6-rc4 due to the unexpected
  number of fixes needed to address ATA disks suspend/resume issues.

  In more detail:

   - Add missing additionalProperties on child nodes to the pata-common
     DT bindings (Rob)

   - Fix handling of the REPORT SUPPORTED OPERATION CODES command to
     ignore reserved bits (Niklas)

   - Increase port multiplier soft reset timeout to accomodate slow
     devices and avoid issues on wakeup (Matthias)

   - A couple of minor code fixes to avoid compilation warnings in
     libata-core and libata-eh (me)

   - Many patches from me to address suspend/resume issues, and in
     particular a potential deadlock on resume due to the SCSI disk
     driver resume operation not being synchronized with libata EH port
     resume handling.

     This is addressed by changing the scsi disk driver disk start/stop
     control to allow libata to execute disk suspend (spin down) and
     resume (spin up) on its own during system suspend/resume. Runtime
     suspend/resume control remains with the SCSI disk driver.

     Other fixes include:
      - Fix libata power management request issuing to avoid races
      - Establish a link between ATA ports and SCSI devices to order PM
        operations
      - Fix device removal to avoid issues with driver rmmod removal
      - Fix synchronization of libata device rescan and SCSI disk resume
        operation
      - Remove libsas PM operations as suspend/resume is handled
        directly by the sas controller resume
      - Fix the SCSI disk driver to not issue commands to suspended
        disks, thus avoiding potential system lock-up on resume"

* tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  scsi: sd: Do not issue commands to suspended disks on shutdown
  ata: libata-core: Do not register PM operations for SAS ports
  ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  scsi: Do not attempt to rescan suspended devices
  ata: libata-scsi: Disable scsi device manage_system_start_stop
  scsi: sd: Differentiate system and runtime start/stop management
  ata: libata-scsi: link ata port and scsi device
  ata: libata-core: Fix port and device removal
  ata: libata-core: Fix ata_port_request_pm() locking
  ata: libata-sata: increase PMP SRST timeout to 10s
  ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
  dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes

Pull block fixes from Jens Axboe:
 "Just two minor comment / documentation fixes for the block side"

* tag 'block-6.6-2023-09-28' of git://git.kernel.dk/linux:
  block: fix kernel-doc for disk_force_media_change()
  block: correct stale comment in rq_qos_wait

Pull io_uring fix from Jens Axboe:
 "A single fix going to stable for the IORING_OP_LINKAT flag handling"

* tag 'io_uring-6.6-2023-09-28' of git://git.kernel.dk/linux:
  io_uring/fs: remove sqe->rw_flags checking from LINKAT

Pull slab fixes from Vlastimil Babka:

 - stable fix to prevent list corruption when destroying caches with
   leftover objects (Rafael Aquini)

 - fix for a gotcha in kmalloc_size_roundup() when calling it with too
   high size, discovered when recently a networking call site had to be
   fixed for a different issue (David Laight)

* tag 'slab-fixes-for-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  slab: kmalloc_size_roundup() must not return 0 for non-zero size
  mm/slab_common: fix slab_caches list corruption after kmem_cache_destroy()

Pull drm fixes from Dave Airlie:
 "Regular pull, this feel suspiciously light so I expect next week might
  be a bit heavier? Let's see how we go. This is from a code point of
  view ivpu and i915 fixes.

  The only other patch is adding Danilo Krummrich to the nouveau
  maintainers, he's agreed to take on more of the roll after Ben
  retired.

  MAINTAINERS:
   - add Danilo for nouveau

  ivpu:
   - Add PCI ids for Arrow Lake
   - Fix memory corruption during IPC
   - Avoid dmesg flooding
   - 40xx: Wait for clock resource
   - 40xx: Fix interrupt usage
   - 40xx: Support caching when loading firmware

  i915:
   - Fix a panic regression on gen8_ggtt_insert_entries
   - Fix load issue due to reservation address in ggtt_reserve_guc_top
   - Fix a possible deadlock with guc busyness worker"

* tag 'drm-fixes-2023-09-29' of git://anongit.freedesktop.org/drm/drm:
  accel/ivpu: Use cached buffers for FW loading
  accel/ivpu/40xx: Fix missing VPUIP interrupts
  accel/ivpu/40xx: Disable frequency change interrupt
  accel/ivpu/40xx: Ensure clock resource ownership Ack before Power-Up
  accel/ivpu: Don't flood dmesg with VPU ready message
  accel/ivpu: Do not use wait event interruptible
  MAINTAINERS: update nouveau maintainers
  i915/guc: Get runtime pm in busyness worker only if already active
  drm/i915/gt: Fix reservation address in ggtt_reserve_guc_top
  i915: Limit the length of an sg list to the requested length
  accel/ivpu: Add Arrow Lake pci id

Pull gpio fixes from Bartosz Golaszewski:

 - fix a potential spinlock deadlock in gpio-timberdale

 - mark the gpio-pmic-eic-sprd driver as one that can sleep

* tag 'gpio-fixes-for-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: pmic-eic-sprd: Add can_sleep flag for PMIC EIC chip
  gpio: timberdale: Fix potential deadlock on &tgpio->lock

Pull clk fixes from Stephen Boyd:
 "A bunch of clk driver fixes for issues found recently:

   - Fix the binding for versaclock3 that was introduced this merge
     window so we know what the values are for clk consumers

   - Fix a 64-bit division issue in the versaclock3 driver

   - Avoid breakage in the versaclock3 driver by rejiggering the enums
     used to layout clks

   - Fix the parent name of a clk in the Spreadtrum ums512 clk driver

   - Fix a suspend/resume issue in Skyworks Si521xx clk driver where
     regmap restoration fails because writes are wedged

   - Return zero from Tegra bpmp recalc_rate() implementation when an
     error occurs so we don't consider an error as a large rate"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: tegra: fix error return case for recalc_rate
  clk: si521xx: Fix regmap write accessor
  clk: si521xx: Use REGCACHE_FLAT instead of NONE
  clk: sprd: Fix thm_parents incorrect configuration
  clk: vc3: Make vc3_clk_mux enum values based on vc3_clk enum values
  clk: vc3: Fix output clock mapping
  clk: vc3: Fix 64 by 64 division
  dt-bindings: clock: versaclock3: Add description for #clock-cells property

Pull power supply fixes from Sebastian Reichel:

 - core: fix use after free during device release

 - ab8500: avoid reporting multiple batteries to userspace

 - rk817: fix DT node resource leak

 - misc. small fixes, mostly for compiler warnings/errors

* tag 'for-v6.6-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: rk817: Fix node refcount leak
  power: supply: core: fix use after free in uevent
  power: supply: rt9467: Fix rt9467_run_aicl()
  power: supply: rk817: Add missing module alias
  power: supply: ucs1002: fix error code in ucs1002_get_property()
  power: vexpress: fix -Wvoid-pointer-to-enum-cast warning
  power: reset: use capital "OR" for multiple licenses in SPDX
  pwr-mlxbf: extend Kconfig to include gpio-mlxbf3 dependency
  power: supply: rt5033_charger: recognize EXTCON setting
  power: supply: mt6370: Fix missing error code in mt6370_chg_toggle_cfo()
  power: supply: ab8500: Set typing and props

Pull Xtensa fixes from Max Filippov:

 - fix build warnings from builds performed with W=1

* tag 'xtensa-20230928' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: boot/lib: fix function prototypes
  xtensa: umulsidi3: fix conditional expression
  xtensa: boot: don't add include-dirs
  xtensa: iss/network: make functions static
  xtensa: tlb: include <asm/tlb.h> for missing prototype
  xtensa: hw_breakpoint: include header for missing prototype
  xtensa: smp: add headers for missing function prototypes
  irqchip: irq-xtensa-mx: include header for missing prototype
  xtensa: traps: add <linux/cpu.h> for function prototype
  xtensa: stacktrace: include <asm/ftrace.h> for prototype
  xtensa: signal: include headers for function prototypes
  xtensa: processor.h: add init_arch() prototype
  xtensa: ptrace: add prototypes to <asm/ptrace.h>
  xtensa: irq: include <asm/traps.h>
  xtensa: fault: include <asm/traps.h>
  xtensa: add default definition for XCHAL_HAVE_DIV32

This is unionized with the actual link flags, so they can of course be
set and they will be evaluated further down. If not we fail any LINKAT
that has to set option flags.

Fixes: cf30da90 ("io_uring: add support for IORING_OP_LINKAT")
Cc: stable@vger.kernel.org
Reported-by: Thomas Leonard <talex5@gmail.com>
Link: https://github.com/axboe/liburing/issues/955Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'drm-intel-fixes-2023-09-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix a panic regression on gen8_ggtt_insert_entries (Matthew Wilcox)
- Fix load issue due to reservation address in ggtt_reserve_guc_top (Javier Pello)
- Fix a possible deadlock with guc busyness worker (Umesh)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZRWMI1HmUYPGGylp@intel.com

Short summary of fixes pull:

 * ivpu:
   * Add PCI ids for Arrow Lake
   * Fix memory corruption during IPC
   * Avoid dmesg flooding
   * 40xx: Wait for clock resource
   * 40xx: Fix interrupt usage
   * 40xx: Support caching when loading firmware
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230928081208.GA7881@linux-uq9g

Forget to reset ctx->password to NULL will lead to bug like double free

Cc: stable@vger.kernel.org
Cc: Willy Tarreau <w@1wt.eu>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Quang Le <quanglex97@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull spi fixes from Mark Brown:
 "A small set of device specific fixes, the most major one is for the
  GXP driver which would probably have been confusing some callers with
  returning the length rather than 0 on successful writes"

* tag 'spi-fix-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-gxp: BUG: Correct spi write return value
  dt-bindings: spi: fsl-imx-cspi: Document missing entries
  spi: cs42l43: Remove spurious pm_runtime_disable

Merge tag 'loongarch-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Fix high_memory calculation and module loader errors with latest
  binutils"

* tag 'loongarch-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Add support for 64_PCREL relocation type
  LoongArch: Add support for 32_PCREL relocation type
  LoongArch: Define relocation types for ABI v2.10
  LoongArch: numa: Fix high_memory calculation

Pull MIPS fix from Thomas Bogendoerfer:

 - fix Alchemy build with MMC support disabled

* tag 'mips-fixes_6.6_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Alchemy: only build mmc support helpers if au1xmmc is enabled

nfsd4_encode_readv() uses xdr->buf->page_len as a starting point for
the nfsd_iter_read() sink buffer -- page_len is going to be offset
by the parts of the COMPOUND that have already been encoded into
xdr->buf->pages.

However, that value must be captured /before/
xdr_reserve_space_vec() advances page_len by the expected size of
the read payload. Otherwise, the whole front part of the first
page of the payload in the reply will be uninitialized.

Mantas hit this because sec=krb5i forces RQ_SPLICE_OK off, which
invokes the readv part of the nfsd4_encode_read() path. Also,
older Linux NFS clients appear to send shorter READ requests
for files smaller than a page, whereas newer clients just send
page-sized requests and let the server send as many bytes as
are in the file.
Reported-by: Mantas Mikulėnas <grawity@gmail.com>
Closes: https://lore.kernel.org/linux-nfs/f1d0b234-e650-0f6e-0f5d-126b3d51d1eb@gmail.com/
Fixes: 703d7521 ("NFSD: Hoist rq_vec preparation into nfsd_read() [step two]")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

The 6 bytes length of the tries_buf string in ata_eh_link_report() is
too short and results in a gcc compilation warning with W-!:

drivers/ata/libata-eh.c: In function ‘ata_eh_link_report’:
drivers/ata/libata-eh.c:2371:59: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 4 [-Wformat-truncation=]
 2371 |                 snprintf(tries_buf, sizeof(tries_buf), " t%d",
      |                                                           ^~
drivers/ata/libata-eh.c:2371:56: note: directive argument in the range [-2147483648, 4]
 2371 |                 snprintf(tries_buf, sizeof(tries_buf), " t%d",
      |                                                        ^~~~~~
drivers/ata/libata-eh.c:2371:17: note: ‘snprintf’ output between 4 and 14 bytes into a destination of size 6
 2371 |                 snprintf(tries_buf, sizeof(tries_buf), " t%d",
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 2372 |                          ap->eh_tries);
      |                          ~~~~~~~~~~~~~

Avoid this warning by increasing the string size to 16B.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>

The 24 bytes length allocated to the ncq_desc string in
ata_dev_config_lba() for ata_dev_config_ncq() to use is too short,
causing the following gcc compilation warnings when compiling with W=1:

drivers/ata/libata-core.c: In function ‘ata_dev_configure’:
drivers/ata/libata-core.c:2378:56: warning: ‘%d’ directive output may be truncated writing between 1 and 2 bytes into a region of size between 1 and 11 [-Wformat-truncation=]
 2378 |                 snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
      |                                                        ^~
In function ‘ata_dev_config_ncq’,
    inlined from ‘ata_dev_config_lba’ at drivers/ata/libata-core.c:2649:8,
    inlined from ‘ata_dev_configure’ at drivers/ata/libata-core.c:2952:9:
drivers/ata/libata-core.c:2378:41: note: directive argument in the range [1, 32]
 2378 |                 snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
      |                                         ^~~~~~~~~~~~~~~~~~~~~
drivers/ata/libata-core.c:2378:17: note: ‘snprintf’ output between 16 and 31 bytes into a destination of size 24
 2378 |                 snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 2379 |                         ddepth, aa_desc);
      |                         ~~~~~~~~~~~~~~~~

Avoid these warnings and the potential truncation by changing the size
of the ncq_desc string to 32 characters.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>

If an error occurs when resuming a host adapter before the devices
attached to the adapter are resumed, the adapter low level driver may
remove the scsi host, resulting in a call to sd_remove() for the
disks of the host. This in turn results in a call to sd_shutdown() which
will issue a synchronize cache command and a start stop unit command to
spindown the disk. sd_shutdown() issues the commands only if the device
is not already runtime suspended but does not check the power state for
system-wide suspend/resume. That is, the commands may be issued with the
device in a suspended state, which causes PM resume to hang, forcing a
reset of the machine to recover.

Fix this by tracking the suspended state of a disk by introducing the
suspended boolean field in the scsi_disk structure. This flag is set to
true when the disk is suspended is sd_suspend_common() and resumed with
sd_resume(). When suspended is true, sd_shutdown() is not executed from
sd_remove().

Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>

libsas does its own domain based power management of ports. For such
ports, libata should not use a device type defining power management
operations as executing these operations for suspend/resume in addition
to libsas calls to ata_sas_port_suspend() and ata_sas_port_resume() is
not necessary (and likely dangerous to do, even though problems are not
seen currently).

Introduce the new ata_port_sas_type device_type for ports managed by
libsas. This new device type is used in ata_tport_add() and is defined
without power management operations.

Fixes: 2fcbdcb4 ("[SCSI] libata: export ata_port suspend/resume infrastructure for sas")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>

Commit 6aa0365a ("ata: libata-scsi: Avoid deadlock on rescan after
device resume") modified ata_scsi_dev_rescan() to check the scsi device
"is_suspended" power field to ensure that the scsi device associated
with an ATA device is fully resumed when scsi_rescan_device() is
executed. However, this fix is problematic as:
1) It relies on a PM internal field that should not be used without PM
   device locking protection.
2) The check for is_suspended and the call to scsi_rescan_device() are
   not atomic and a suspend PM event may be triggered between them,
   casuing scsi_rescan_device() to be called on a suspended device and
   in that function blocking while holding the scsi device lock. This
   would deadlock a following resume operation.
These problems can trigger PM deadlocks on resume, especially with
resume operations triggered quickly after or during suspend operations.
E.g., a simple bash script like:

for (( i=0; i<10; i++ )); do
	echo "+2 > /sys/class/rtc/rtc0/wakealarm
	echo mem > /sys/power/state
done

that triggers a resume 2 seconds after starting suspending a system can
quickly lead to a PM deadlock preventing the system from correctly
resuming.

Fix this by replacing the check on is_suspended with a check on the
return value given by scsi_rescan_device() as that function will fail if
called against a suspended device. Also make sure rescan tasks already
scheduled are first cancelled before suspending an ata port.

Fixes: 6aa0365a ("ata: libata-scsi: Avoid deadlock on rescan after device resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi_rescan_device() takes a scsi device lock before executing a device
handler and device driver rescan methods. Waiting for the completion of
any command issued to the device by these methods will thus be done with
the device lock held. As a result, there is a risk of deadlocking within
the power management code if scsi_rescan_device() is called to handle a
device resume with the associated scsi device not yet resumed.

Avoid such situation by checking that the target scsi device is in the
running state, that is, fully capable of executing commands, before
proceeding with the rescan and bailout returning -EWOULDBLOCK otherwise.
With this error return, the caller can retry rescaning the device after
a delay.

The state check is done with the device lock held and is thus safe
against incoming suspend power management operations.

Fixes: 6aa0365a ("ata: libata-scsi: Avoid deadlock on rescan after device resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>

The introduction of a device link to create a consumer/supplier
relationship between the scsi device of an ATA device and the ATA port
of that ATA device fixes the ordering of system suspend and resume
operations. For suspend, the scsi device is suspended first and the ata
port after it. This is fine as this allows the synchronize cache and
START STOP UNIT commands issued by the scsi disk driver to be executed
before the ata port is disabled.

For resume operations, the ata port is resumed first, followed
by the scsi device. This allows having the request queue of the scsi
device to be unfrozen after the ata port resume is scheduled in EH,
thus avoiding to see new requests prematurely issued to the ATA device.
Since libata sets manage_system_start_stop to 1, the scsi disk resume
operation also results in issuing a START STOP UNIT command to the
device being resumed so that the device exits standby power mode.

However, restoring the ATA device to the active power mode must be
synchronized with libata EH processing of the port resume operation to
avoid either 1) seeing the start stop unit command being received too
early when the port is not yet resumed and ready to accept commands, or
after the port resume process issues commands such as IDENTIFY to
revalidate the device. In this last case, the risk is that the device
revalidation fails with timeout errors as the drive is still spun down.

Commit 0a858905 ("ata,scsi: do not issue START STOP UNIT on resume")
disabled issuing the START STOP UNIT command to avoid issues with it.
But this is incorrect as transitioning a device to the active power
mode from the standby power mode set on suspend requires a media access
command. The IDENTIFY, READ LOG and SET FEATURES commands executed in
libata EH context triggered by the ata port resume operation may thus
fail.

Fix these synchronization issues is by handling a device power mode
transitions for system suspend and resume directly in libata EH context,
without relying on the scsi disk driver management triggered with the
manage_system_start_stop flag.

To do this, the following libata helper functions are introduced:

1) ata_dev_power_set_standby():

This function issues a STANDBY IMMEDIATE command to transitiom a device
to the standby power mode. For HDDs, this spins down the disks. This
function applies only to ATA and ZAC devices and does nothing otherwise.
This function also does nothing for devices that have the
ATA_FLAG_NO_POWEROFF_SPINDOWN or ATA_FLAG_NO_HIBERNATE_SPINDOWN flag
set.

For suspend, call ata_dev_power_set_standby() in
ata_eh_handle_port_suspend() before the port is disabled and frozen.
ata_eh_unload() is also modified to transition all enabled devices to
the standby power mode when the system is shutdown or devices removed.

2) ata_dev_power_set_active() and

This function applies to ATA or ZAC devices and issues a VERIFY command
for 1 sector at LBA 0 to transition the device to the active power mode.
For HDDs, since this function will complete only once the disk spin up.
Its execution uses the same timeouts as for reset, to give the drive
enough time to complete spinup without triggering a command timeout.

For resume, call ata_dev_power_set_active() in
ata_eh_revalidate_and_attach() after the port has been enabled and
before any other command is issued to the device.

With these changes, the manage_system_start_stop and no_start_on_resume
scsi device flags do not need to be set in ata_scsi_dev_config(). The
flag manage_runtime_start_stop is still set to allow the sd driver to
spinup/spindown a disk through the sd runtime operations.

Fixes: 0a858905 ("ata,scsi: do not issue START STOP UNIT on resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>

The underlying device and driver of a SCSI disk may have different
system and runtime power mode control requirements. This is because
runtime power management affects only the SCSI disk, while system level
power management affects all devices, including the controller for the
SCSI disk.

For instance, issuing a START STOP UNIT command when a SCSI disk is
runtime suspended and resumed is fine: the command is translated to a
STANDBY IMMEDIATE command to spin down the ATA disk and to a VERIFY
command to wake it up. The SCSI disk runtime operations have no effect
on the ata port device used to connect the ATA disk. However, for
system suspend/resume operations, the ATA port used to connect the
device will also be suspended and resumed, with the resume operation
requiring re-validating the device link and the device itself. In this
case, issuing a VERIFY command to spinup the disk must be done before
starting to revalidate the device, when the ata port is being resumed.
In such case, we must not allow the SCSI disk driver to issue START STOP
UNIT commands.

Allow a low level driver to refine the SCSI disk start/stop management
by differentiating system and runtime cases with two new SCSI device
flags: manage_system_start_stop and manage_runtime_start_stop. These new
flags replace the current manage_start_stop flag. Drivers setting the
manage_start_stop are modifed to set both new flags, thus preserving the
existing start/stop management behavior. For backward compatibility, the
old manage_start_stop sysfs device attribute is kept as a read-only
attribute showing a value of 1 for devices enabling both new flags and 0
otherwise.

Fixes: 0a858905 ("ata,scsi: do not issue START STOP UNIT on resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>

There is no direct device ancestry defined between an ata_device and
its scsi device which prevents the power management code from correctly
ordering suspend and resume operations. Create such ancestry with the
ata device as the parent to ensure that the scsi device (child) is
suspended before the ata device and that resume handles the ata device
before the scsi device.

The parent-child (supplier-consumer) relationship is established between
the ata_port (parent) and the scsi device (child) with the function
device_add_link(). The parent used is not the ata_device as the PM
operations are defined per port and the status of all devices connected
through that port is controlled from the port operations.

The device link is established with the new function
ata_scsi_slave_alloc(), and this function is used to define the
->slave_alloc callback of the scsi host template of all ata drivers.

Fixes: a19a93e4 ("scsi: core: pm: Rely on the device driver core for async power management")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>

Whenever an ATA adapter driver is removed (e.g. rmmod),
ata_port_detach() is called repeatedly for all the adapter ports to
remove (unload) the devices attached to the port and delete the port
device itself. Removing of devices is done using libata EH with the
ATA_PFLAG_UNLOADING port flag set. This causes libata EH to execute
ata_eh_unload() which disables all devices attached to the port.

ata_port_detach() finishes by calling scsi_remove_host() to remove the
scsi host associated with the port. This function will trigger the
removal of all scsi devices attached to the host and in the case of
disks, calls to sd_shutdown() which will flush the device write cache
and stop the device. However, given that the devices were already
disabled by ata_eh_unload(), the synchronize write cache command and
start stop unit commands fail. E.g. running "rmmod ahci" with first
removing sd_mod results in error messages like:

ata13.00: disable device
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 0:0:0:0: [sda] Stopping disk
sd 0:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

Fix this by removing all scsi devices of the ata devices connected to
the port before scheduling libata EH to disable the ATA devices.

Fixes: 720ba126 ("[PATCH] libata-hp: update unload-unplug")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>

The function ata_port_request_pm() checks the port flag
ATA_PFLAG_PM_PENDING and calls ata_port_wait_eh() if this flag is set to
ensure that power management operations for a port are not scheduled
simultaneously. However, this flag check is done without holding the
port lock.

Fix this by taking the port lock on entry to the function and checking
the flag under this lock. The lock is released and re-taken if
ata_port_wait_eh() needs to be called. The two WARN_ON() macros checking
that the ATA_PFLAG_PM_PENDING flag was cleared are removed as the first
call is racy and the second one done without holding the port lock.

Fixes: 5ef41082 ("ata: add ata port system PM callbacks")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>

Pull SCSI fixes from James Bottomley:
 "A single fix for libata: older devices don't support command duration
  limits (CDL) and some don't support report opcodes, meaning there's no
  way to tell if they support the command or not.

  Reduce the problems of incorrectly using CDL commands on older devices
  by checking SCSI spec compliance at SPC-5 (the spec which introduced
  the command) before turning on CDL"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: core: ata: Do no try to probe for CDL on old drives

Pull VFIO fixes from Alex Williamson:

 - The new PDS vfio-pci variant driver only supports SR-IOV VF devices
   and incorrectly made a direct reference to the physfn field of the
   pci_dev.  Fix this both by making the Kconfig depend on IOV support
   as well as using the correct wrapper for this access (Shixiong Ou)

 - Resolve an error path issue where on unwind of the mdev registration
   the created kset is not unregistered and the wrong error code is
   returned (Jinjie Ruan)

* tag 'vfio-v6.6-rc4' of https://github.com/awilliam/linux-vfio:
  vfio/mdev: Fix a null-ptr-deref bug for mdev_unregister_parent()
  vfio/pds: Use proper PF device access helper
  vfio/pds: Add missing PCI_IOV depends

Bug fix to correct return value of gxp_spi_write function to zero.
Completion of succesful operation should return zero.

Fixes: 730bc8ba spi: spi-gxp: Add support for HPE GXP SoCs
Signed-off-by: Charles Kearney <charles.kearney@hpe.com>
Link: https://lore.kernel.org/r/20230920215339.4125856-2-charles.kearney@hpe.comSigned-off-by: Mark Brown <broonie@kernel.org>

When build and update kernel with the latest upstream binutils and
loongson3_defconfig, module loader fails with:

  kmod: zsmalloc: Unknown relocation type 109
  kmod: fuse: Unknown relocation type 109
  kmod: fuse: Unknown relocation type 109
  kmod: radeon: Unknown relocation type 109
  kmod: nf_tables: Unknown relocation type 109
  kmod: nf_tables: Unknown relocation type 109

This is because the latest upstream binutils replaces a pair of ADD64
and SUB64 with 64_PCREL, so add support for 64_PCREL relocation type.

Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ecb802d02eeb
Cc: <stable@vger.kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

When build and update kernel with the latest upstream binutils and
loongson3_defconfig, module loader fails with:

  kmod: zsmalloc: Unsupport relocation type 99, please add its support.
  kmod: fuse: Unsupport relocation type 99, please add its support.
  kmod: ipmi_msghandler: Unsupport relocation type 99, please add its support.
  kmod: ipmi_msghandler: Unsupport relocation type 99, please add its support.
  kmod: pstore: Unsupport relocation type 99, please add its support.
  kmod: drm_display_helper: Unsupport relocation type 99, please add its support.
  kmod: drm_display_helper: Unsupport relocation type 99, please add its support.
  kmod: drm_display_helper: Unsupport relocation type 99, please add its support.
  kmod: fuse: Unsupport relocation type 99, please add its support.
  kmod: fat: Unsupport relocation type 99, please add its support.

This is because the latest upstream binutils replaces a pair of ADD32
and SUB32 with 32_PCREL, so add support for 32_PCREL relocation type.

Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ecb802d02eeb
Cc: <stable@vger.kernel.org>
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

The relocation types from 101 to 109 are used by GNU binutils >= 2.41,
add their definitions to use them in later patches.

Link: https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=include/elf/loongarch.h#l230
Cc: <stable@vger.kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>