- 20 Apr, 2021 1 commit
-
-
Kailang Yang authored
Boot with plugged headset, the Headset Mic will be gone. Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/207eecfc3189466a820720bc0c409ea9@realtek.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 19 Apr, 2021 3 commits
-
-
Takashi Iwai authored
Pioneer devices are supposed to be working with the implicit feedback mode, but so far the attempt to apply the implicit feedback caused issues, hence we explicitly skipped the implicit feedback mode for them. Recently, Geraldo discovered that the device actually works if you skip the generic matching of the sync EPs for the capture stream. That is, we should apply the implicit feedback setup for the playback like other similar devices, while we need to return 1 from audioformat_capture_quirk() so that no further matching will be done. And, later on, Olivia reported later that the fiddling with the capture quirk alone doesn't suffice for the test with speaker-test program. This seems to be a similar case like the recently fixed BOSS devices. Indeed, the problem could be addressed by setting playback_first flag, which indicates that the playback URBs have to be sent out at first even in the implicit feedback mode. This patch implements the application of the implicit feedback to Pioneer devices as described in the above. The former skip_pioneer_sync_ep() was dropped, and instead we provide is_pioneer_implicit_fb() to check the Pioneer devices that need the implicit feedback. In the audioformat_implicit_fb_quirk(), simply apply the implicit fb for playback and set chip->playback_first flag if matching, and in audioformat_capture_quirk()(), it returns 1 for skipping the generic EP sync handling. Reported-by:
Geraldo <geraldogabriel@gmail.com> Tested-by:
Olivia Mackintosh <livvy@base.nu> Link: https://lore.kernel.org/r/s5ha6pygqfz.wl-tiwai@suse.de Link: https://lore.kernel.org/r/20210419153918.450-1-tiwai@suse.deSigned-off-by:
-
Olivia Mackintosh authored
Add case statement to set sample-rate for the DJM-750 Pioneer mixer. This was included as part of another patch but I think it has been archived on Patchwork and hasn't been merged. Signed-off-by:
-
Luke D Jones authored
The GA503 has almost exactly the same default setup as the GA401 model with the same issues. The GA401 quirks solve all the issues so we will use the full quirk chain. Signed-off-by:
Luke D Jones <luke@ljones.dev> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210419030411.28304-1-luke@ljones.devSigned-off-by:
-
- 17 Apr, 2021 1 commit
-
-
Lucas Endres authored
It makes USB audio capture and playback possible and pristine on my Roland INTEGRA-7, Boutique D-05, and R-26, along with many more I've encountered people having had issues with over the last decade or so. Signed-off-by:
Lucas Endres <jaffa225man@gmail.com> Link: https://lore.kernel.org/r/CAOsVg8rA61B=005_VyUwpw3piVwA7Bo5fs1GYEB054efyzGjLw@mail.gmail.comSigned-off-by:
-
- 16 Apr, 2021 5 commits
-
-
Kai Vehmanen authored
When snd-hda-codec-hdmi is used with ASoC HDA controller like SOF (acomp used for ELD notifications), display connection change done during suspend, can be lost due to following sequence of events: 1. system in S3 suspend 2. DP/HDMI receiver connected 3. system resumed 4. HDA controller resumed, but card->deferred_resume_work not complete 5. acomp eld_notify callback 6. eld_notify ignored as power state is not CTL_POWER_D0 7. HDA resume deferred work completed, power state set to CTL_POWER_D0 This results in losing the notification, and the jack state reported to user-space is not correct. The check on step 6 was added in commit 8ae743e8 ("ALSA: hda - Skip ELD notification during system suspend"). It would seem with the deferred resume logic in ASoC core, this check is not safe. Fix the issue by modifying the check to use "dev.power.power_state.event" instead of ALSA specific card power state variable. BugLink: https://github.com/thesofproject/linux/issues/2825Suggested-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210416131157.1881366-1-kai.vehmanen@linux.intel.comSigned-off-by:
-
Jonas Witschel authored
The HP ProBook 445 G7 (17T32ES) uses ALC236. Like ALC236_FIXUP_HP_GPIO_LED, COEF index 0x34 bit 5 is used to control the playback mute LED, but the microphone mute LED is controlled using pin VREF instead of a COEF index. AlsaInfo: https://alsa-project.org/db/?f=0d3f4d1af39cc359f9fea9b550727ee87e5cf45aSigned-off-by:
Jonas Witschel <diabonas@archlinux.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210416105852.52588-1-diabonas@archlinux.orgSigned-off-by:
-
Takashi Iwai authored
Lenovo Ideapad S740 requires quite a few COEF setups to make its speakers working. The verb table was provided from Ryan Prescott as the result of investigation via qemu: https://github.com/ryanprescott/realtek-verb-tools/wiki/How-to-sniff-verbs-from-a-Windows-sound-driver BugLink: https://github.com/thesofproject/linux/issues/2748Tested-by:
Ryan Prescott <ryan@cousinscomputers.net> Link: https://lore.kernel.org/r/20210416081211.20059-1-tiwai@suse.deSigned-off-by:
-
Phil Calvin authored
Fix two bugs with the Intel HDA Realtek ALC233 sound codec present in Intel NUC NUC8i7BEH and probably a few other similar NUC models. These codecs advertise a 4-level microphone input boost amplifier on pin 0x19, but the highest two boost settings do not work correctly, and produce only low analog noise that does not seem to contain any discernible signal. There is an existing fixup for this exact problem but for a different PCI subsystem ID, so we re-use that logic. Changing the boost level also triggers a DC spike in the input signal that bleeds off over about a second and overwhelms any input during that time. Thankfully, the existing fixup has the side effect of making the boost control show up in userspace as a mute/unmute switch, and this keeps (e.g.) PulseAudio from fiddling with it during normal input volume adjustments. Finally, the NUC hardware has built-in inverted stereo mics. This patch also enables the usual fixup for this so the two channels cancel noise instead of the actual signal. [ Re-ordered the quirk entry point by tiwai ] Signed-off-by:
Phil Calvin <phil@philcalvin.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/80dc5663-7734-e7e5-25ef-15b5df24511a@philcalvin.comSigned-off-by:
-
Takashi Iwai authored
We've got a report about the possible race in the user control element counts (card->user_ctl_count), and it was confirmed that the race wasn't serious in the old code up to 5.12. There, the value modification itself was exclusive and protected via a write semaphore, hence it's at most concurrent reads and evaluations before the increment. Since it's only about the soft-limit to avoid the exhausting memory usage, one-off isn't a big problem at all. Meanwhile, the relevant code has been largely modified recently, and now card->user_ctl_count was replaced with card->user_ctl_alloc_size, and a few more places were added to access this field. And, in this new code, it turned out to be more serious: the modifications are scattered in various places, and a few of them are without protection. It implies that it may lead to an inconsistent value by racy accesses. For addressing it, this patch extends the range covered by the card->controls_rwsem write lock at snd_ctl_elem_add() so that the all code paths that modify and refer to card->user_ctl_alloc_size are protected by the rwsem properly. The patch adds also comments in a couple of functions to indicate that they are under the rwsem lock. Fixes: 66c6d1ef ("ALSA: control: Add memory consumption limit to user controls") Link: https://lore.kernel.org/r/FEEBF384-44BE-42CF-8FB3-93470933F64F@purdue.edu Link: https://lore.kernel.org/r/20210415131856.13113-1-tiwai@suse.deSigned-off-by:
-
- 14 Apr, 2021 2 commits
-
-
Takashi Iwai authored
During the recent rewrite of the implicit feedback support, we've tested to apply the implicit fb on BOSS devices, but it failed, as the capture stream didn't start without the playback. As the end result, it got another type of quirk for tying both streams but starts playback always (commit 6234fdc1 "ALSA: usb-audio: Quirk for BOSS GT-001"). Meanwhile, Mike Oliphant has tested the real implicit feedback mode for the playback again with the latest code, and found out that it actually works if the initial feedback sync is skipped; that is, on those BOSS devices, the playback stream has to be started at first without waiting for the capture URB completions. Otherwise it gets stuck. In the rest operations after the capture stream processed, we can take them as the implicit feedback source. This patch is an attempt to improve the support for BOSS devices with the implicit feedback mode in the way described above. It adds a new flag to snd_usb_audio, playback_first, indicating that the playback stream starts without sync with the initial capture completion. This flag is set in the quirk table with the new IMPLICIT_FB_BOTH type. Reported-and-tested-by:
Mike Oliphant <oliphant@nostatic.org> Link: https://lore.kernel.org/r/20210414083255.9527-1-tiwai@suse.deSigned-off-by:
-
Jaroslav Kysela authored
It's a bad idea to allocate big structures on the stack. Mark the variables as static and add a note for the locking. Fixes: 22d8de62 ("ALSA: control - add generic LED trigger module as the new control layer") Cc: Nathan Chancellor <nathan@kernel.org> Cc: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20210414105858.1937710-1-perex@perex.czSigned-off-by:
-
- 13 Apr, 2021 1 commit
-
-
Takashi Iwai authored
In the current code, we have some assumption that the audio clock selector has been set up implicitly and don't want to touch it unless it's really needed for the fallback autoclock setup. This works for most devices but some seem having a problem. Partially this was covered for the devices with a single connector at the initialization phase (commit 086b957c "ALSA: usb-audio: Skip the clock selector inquiry for single connections"), but also there are cases where the wrong clock set up is kept silently. The latter seems to be the cause of the noises on Behringer devices. In this patch, we explicitly set up the audio clock selector whenever the appropriate node is found. Reported-by:
-
- 12 Apr, 2021 1 commit
-
-
Chen Huang authored
module_virtio_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by:
Chen Huang <chenhuang5@huawei.com> Reviewed-by:
Anton Yakovlev <anton.yakovlev@opensynergy.com> Link: https://lore.kernel.org/r/20210408125429.1158703-1-chenhuang5@huawei.comSigned-off-by:
-
- 10 Apr, 2021 1 commit
-
-
Ranjani Sridharan authored
Add description for access parameter in __snd_hda_add_vmaster() to prevent the compilation warning: warning: Function parameter or member 'access' not described in '__snd_hda_add_vmaster' Fixes: e65bf997 ("ALSA: HDA - remove the custom implementation for the audio LED trigger") Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20210409214616.1539685-1-ranjani.sridharan@linux.intel.comSigned-off-by:
-
- 09 Apr, 2021 4 commits
-
-
Dan Carpenter authored
"group - 1" was intended here instead of "group". The current error handling will double free the first item in the array and leak the last item. Fixes: cb17fe00 ("ALSA: control - add sysfs support to the LED trigger module") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Takashi Iwai authored
ToneLab EX guitar pedal device requires the same quirk like ToneLab ST for supporting the MIDI. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212593 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210407144549.1530-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
UA-101 device and co are supported by another driver, snd-ua101, but the USB audio class driver (snd-usb-audio) catches all and this resulted in the lack of functionality like missing MIDI devices. This patch introduces a sort of deny-listing for those devices to just return -ENODEV at probe in snd-usb-audio driver, so that it falls back to the probe by snd-ua101. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212477 Link: https://lore.kernel.org/r/20210408075656.30184-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Signed-off-by:
-
- 08 Apr, 2021 2 commits
-
-
Takashi Sakamoto authored
ALSA control interface allows users to add arbitrary control elements (called "user controls" or "user elements"), and its resource usage is limited just by the max number of control sets (currently 32). This limit, however, is quite loose: each allocation of control set may have 1028 elements, and each element may have up to 512 bytes (ILP32) or 1024 bytes (LP64) of value data. Moreover, each control set may contain the enum strings and TLV data, which can be up to 64kB and 128kB, respectively. Totally, the whole memory consumption may go over 38MB -- it's quite large, and we'd rather like to reduce the size. OTOH, there have been other requests even to increase the max number of user elements; e.g. ALSA firewire stack require the more user controls, hence we want to raise the bar, too. For satisfying both requirements, this patch changes the management of user controls: instead of setting the upper limit of the number of user controls, we check the actual memory allocation size and set the upper limit of the total allocation in bytes. As long as the memory consumption stays below the limit, more user controls are allowed than the current limit 32. At the same time, we set the lower limit (8MB) as default than the current theoretical limit, in order to lower the risk of DoS. As a compromise for lowering the default limit, now the actual memory limit is defined as a module option, 'max_user_ctl_alloc_size', so that user can increase/decrease the limit if really needed, too. Link: https://lore.kernel.org/r/s5htur3zl5e.wl-tiwai@suse.deCo-developed-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by:
-
Takashi Iwai authored
We've got a report about Acer Aspire E1 (PCI SSID 1025:0840) that loses the speaker output after resume. With the comparison of COEF dumps, it was identified that the COEF 0x0d bits 0x6000 corresponds to the speaker amp. This patch adds the specific quirk for the device to restore the COEF bits at the codec (re-)initialization. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1183869 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210407095730.12560-1-tiwai@suse.deSigned-off-by:
-
- 07 Apr, 2021 4 commits
-
-
Takashi Iwai authored
Merge tag 'asoc-fix-v5.12-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.12 A fairly small batch of driver specific fixes, mainly for various x86 systems with the biggest set being fixes to power down DSPs properly on x86 SOF systems.
-
Takashi Iwai authored
The implicit feedback quirk table contains the entries that also appear in the capture quirks, and those are all handled to be skipped. For the code simplicity, drop the duped entries in the playback quirk table, and check the match with the capture quirk table instead. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212519 Link: https://lore.kernel.org/r/20210406113837.32041-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
There are a few calls of usb_driver_claim_interface() but all of those miss the proper error checks, as reported by Coverity. This patch adds those missing checks. Along with it, replace the magic pointer with -1 with a constant USB_AUDIO_IFACE_UNUSED for better readability. Reported-by:
coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1475943 ("Error handling issues") Addresses-Coverity-ID: 1475944 ("Error handling issues") Addresses-Coverity-ID: 1475945 ("Error handling issues") Fixes: b1ce7ba6 ("ALSA: usb-audio: claim autodetected PCM interfaces all at once") Fixes: e5779998 ("ALSA: usb-audio: refactor code") Link: https://lore.kernel.org/r/202104051059.FB7F3016@keescook Link: https://lore.kernel.org/r/20210406113534.30455-1-tiwai@suse.deSigned-off-by:
-
Jonas Holmberg authored
Add a control to the card before copying the id so that the numid field is initialized in the copy. Otherwise the numid field of active_id, format_id, rate_id and channels_id will be the same (0) and snd_ctl_notify() will not queue the events properly. Signed-off-by:
Jonas Holmberg <jonashg@axis.com> Reviewed-by:
-
- 06 Apr, 2021 2 commits
-
-
Takashi Iwai authored
There is another HP ZBook G5 model with the PCI SSID 103c:844f that requires the same quirk for controlling the mute LED. Add the corresponding entry to the quirk table. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212407 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210401171314.667-1-tiwai@suse.deSigned-off-by:
-
Dan Carpenter authored
If count is 16 then this will put the NUL terminator one element beyond the end of the array. Fixes: cb17fe00 ("ALSA: control - add sysfs support to the LED trigger module") Signed-off-by:
-
- 02 Apr, 2021 1 commit
-
-
Alexander Shiyan authored
When using the driver in I2S TDM mode, the fsl_esai_startup() function rewrites the number of slots previously set by the fsl_esai_set_dai_tdm_slot() function to 2. To fix this, let's use the saved slot count value or, if TDM is not used and the number of slots is not set, the driver will use the default value (2), which is set by fsl_esai_probe(). Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/20210402081405.9892-1-shc_work@mail.ruSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 01 Apr, 2021 5 commits
-
-
Srinivas Kandagatla authored
NPL clock rate is twice the MCLK rate, so set this correctly to avoid soundwire timeouts. Fixes: af3d54b9 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210331171235.24824-2-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Srinivas Kandagatla authored
NPL clock rate is twice the MCLK rate, so set this correctly to avoid soundwire timeouts. Fixes: c39667dd ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro") Signed-off-by:
-
Takashi Iwai authored
Pull mute-LED helper fixes from Jaroslav. Signed-off-by: -
Jaroslav Kysela authored
It may be possible that the string pointer does not move when parsing. Add a code which detects this state and simply break the parser loop in this case. Signed-off-by:
-
Jaroslav Kysela authored
As static analysis reported, the prev_lops2 should contain the previous lops2 pointer in snd_ctl_disconnect_layer(). Link: https://lore.kernel.org/alsa-devel/96e9bd5c-c8db-0db8-b393-fbf4a047dc80@canonical.com/ Fixes: 3f0638a0 ("ALSA: control - add layer registration routines") Signed-off-by:
-
- 31 Mar, 2021 1 commit
-
-
Bastian Germann authored
card->owner is a required property and since commit 81033c6b ("ALSA: core: Warn on empty module") a warning is issued if it is empty. Add it. This fixes following warning observed on Lamobo R1: WARNING: CPU: 1 PID: 190 at sound/core/init.c:207 snd_card_new+0x430/0x480 [snd] Modules linked in: sun4i_codec(E+) sun4i_backend(E+) snd_soc_core(E) ... CPU: 1 PID: 190 Comm: systemd-udevd Tainted: G C E 5.10.0-1-armmp #1 Debian 5.10.4-1 Hardware name: Allwinner sun7i (A20) Family Call trace: (snd_card_new [snd]) (snd_soc_bind_card [snd_soc_core]) (snd_soc_register_card [snd_soc_core]) (sun4i_codec_probe [sun4i_codec]) Fixes: 45fb6b6f ("ASoC: sunxi: add support for the on-chip codec on early Allwinner SoCs") Related: commit 3c27ea23 ("ASoC: qcom: Set card->owner to avoid warnings") Related: commit ec653df2 ("drm/vc4/vc4_hdmi: fill ASoC card owner") Cc: linux-arm-kernel@lists.infradead.org Cc: alsa-devel@alsa-project.org Signed-off-by:
Bastian Germann <bage@linutronix.de> Link: https://lore.kernel.org/r/20210331151843.30583-1-bage@linutronix.deSigned-off-by:
-
- 30 Mar, 2021 6 commits
-
-
Takashi Iwai authored
ALSA: control - add generic LED API This patchset tries to resolve the diversity in the audio LED control among the ALSA drivers. A new control layer registration is introduced which allows to run additional operations on top of the elementary ALSA sound controls. A new control access group (three bits in the access flags) was introduced to carry the LED group information for the sound controls. The low-level sound drivers can just mark those controls using this access group. This information is not exported to the user space, but user space can manage the LED sound control associations through sysfs (last patch) per Mark's request. It makes things fully configurable in the kernel and user space (UCM). The actual state ('route') evaluation is really easy (the minimal value check for all channels / controls / cards). If there's more complicated logic for a given hardware, the card driver may eventually export a new read-only sound control for the LED group and do the logic itself. The new LED trigger control code is completely separated and possibly optional (there's no symbol dependency). The full code separation allows eventually to move this LED trigger control to the user space in future. Actually it replaces the already present functionality in the kernel space (HDA drivers) and allows a quick adoption for the recent hardware (ASoC codecs including SoundWire). snd_ctl_led 24576 0 The sound driver implementation is really easy: 1) call snd_ctl_led_request() when control LED layer should be automatically activated / it calls module_request("snd-ctl-led") on demand / 2) mark all related kcontrols with SNDRV_CTL_ELEM_ACCESS_SPK_LED or SNDRV_CTL_ELEM_ACCESS_MIC_LED Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.czSigned-off-by: -
Jaroslav Kysela authored
We need to manage the kcontrol entries association for the LED trigger from the user space. This patch adds a layer to the sysfs tree like: /sys/devices/virtual/sound/ctl-led/mic + card0 | + attach | + detach | ... + card1 + attach ... Operations: attach and detach - amixer style ID is accepted and easy strings for numid and simple names reset - reset all associated kcontrol entries list - list associated kcontrol entries (numid values only) Additional symlinks: /sys/devices/virtual/sound/ctl-led/mic/card0/card -> /sys/class/sound/card0 /sys/class/sound/card0/controlC0/led-mic -> /sys/devices/virtual/sound/ctl-led/mic/card0 Signed-off-by: -
Jaroslav Kysela authored
Create SYSFS/devices/virtual/sound/ctl-led tree (with SYSFS/class/sound/ctl-led symlink). speaker/ +-- mode +-- brightness mic/ +-- mode +-- brightness Copy the idea from the HDA driver and allow to set the audio LEDs based on the various modes: - follow mute - follow moute (inverted to follow mute) - off - on Also, the actual LED state is exposed. Signed-off-by: -
Jaroslav Kysela authored
With the new snd-ctl-led module, we have a generic way to trigger audio LEDs based on the sound control changes. Remove the custom implementation from the HDA driver. Move the LED initialization before snd_hda_gen_parse_auto_config() call in all drivers to create marked controls there. Signed-off-by:
-
Jaroslav Kysela authored
The recent laptops have usually two LEDs assigned to reflect the speaker and microphone mute state. This implementation adds a tiny layer on top of the control API which calculates the state for those LEDs using the driver callbacks. Two new access flags are introduced to describe the controls which affects the audio path settings (an easy code change for drivers). The LED resource can be shared with multiple sound cards with this code. The user space controls may be added to the state chain on demand, too. This code should replace the LED code in the HDA driver and add a possibility to easy extend the other drivers (ASoC codecs etc.). Signed-off-by:
-
Jaroslav Kysela authored
The layer registration allows to handle an extra functionality on top of the control API. It can be used for the audio LED control for example. Signed-off-by:
-
