DDPP is copied from Synopsys Data book:

DDPP: Disable Data path Parity Protection.
    When it is 0x0, Data path Parity Protection is enabled.
    When it is 0x1, Data path Parity Protection is disabled.

The macro name should be XGMAC_DPP_DISABLE.

Fixes: 46eba193 ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20240203053133.1129236-1-0x1207@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Selftests here check not only that connect()/accept() for
TCP-AO/TCP-MD5/non-signed-TCP combinations do/don't establish
connections, but also counters: those are per-AO-key, per-socket and
per-netns.

The counters are checked on the server's side, as the server listener
has TCP-AO/TCP-MD5/no keys for different peers. All tests run in
the same namespaces with the same veth pair, created in test_init().

After close() in both client and server, the sides go through
the regular FIN/ACK + FIN/ACK sequence, which goes in the background.
If the selftest has already started a new testing scenario, read
per-netns counters - it may fail in the end iff it doesn't expect
the TCPAOGood per-netns counters go up during the test.

Let's just kill both TCP-AO sides - that will avoid any asynchronous
background TCP-AO segments going to either sides.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20240201132153.4d68f45e@kernel.org/T/#u
Fixes: 6f0c472a ("selftests/net: Add TCP-AO + TCP-MD5 + no sign listen socket tests")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20240202-unsigned-md5-netns-counters-v1-1-8b90c37c0566@arista.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

syzbot reported the following general protection fault [1]:

general protection fault, probably for non-canonical address 0xdffffc0000000010: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000080-0x0000000000000087]
...
RIP: 0010:tipc_udp_is_known_peer+0x9c/0x250 net/tipc/udp_media.c:291
...
Call Trace:
 <TASK>
 tipc_udp_nl_bearer_add+0x212/0x2f0 net/tipc/udp_media.c:646
 tipc_nl_bearer_add+0x21e/0x360 net/tipc/bearer.c:1089
 genl_family_rcv_msg_doit+0x1fc/0x2e0 net/netlink/genetlink.c:972
 genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline]
 genl_rcv_msg+0x561/0x800 net/netlink/genetlink.c:1067
 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2544
 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076
 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
 netlink_unicast+0x53b/0x810 net/netlink/af_netlink.c:1367
 netlink_sendmsg+0x8b7/0xd70 net/netlink/af_netlink.c:1909
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg+0xd5/0x180 net/socket.c:745
 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

The cause of this issue is that when tipc_nl_bearer_add() is called with
the TIPC_NLA_BEARER_UDP_OPTS attribute, tipc_udp_nl_bearer_add() is called
even if the bearer is not UDP.

tipc_udp_is_known_peer() called by tipc_udp_nl_bearer_add() assumes that
the media_ptr field of the tipc_bearer has an udp_bearer type object, so
the function goes crazy for non-UDP bearers.

This patch fixes the issue by checking the bearer type before calling
tipc_udp_nl_bearer_add() in tipc_nl_bearer_add().

Fixes: ef20cd4d ("tipc: introduce UDP replicast")
Reported-and-tested-by: syzbot+5142b87a9abc510e14fa@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5142b87a9abc510e14fa [1]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20240131152310.4089541-1-syoshida@redhat.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

In very slow environments, most big TCP cases including
segmentation and reassembly of big TCP packets have a good
chance to fail: by default the TCP client uses write size
well below 64K. If the host is low enough autocorking is
unable to build real big TCP packets.

Address the issue using much larger write operations.

Note that is hard to observe the issue without an extremely
slow and/or overloaded environment; reduce the TCP transfer
time to allow for much easier/faster reproducibility.

Fixes: 6bb382bc ("selftests: add a selftest for big tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Howells says:

====================
rxrpc: Miscellaneous fixes

Here some miscellaneous fixes for AF_RXRPC:

 (1) The zero serial number has a special meaning in an ACK packet serial
     reference, so skip it when assigning serial numbers to transmitted
     packets.

 (2) Don't set the reference serial number in a delayed ACK as the ACK
     cannot be used for RTT calculation.

 (3) Don't emit a DUP ACK response to a PING RESPONSE ACK coming back to a
     call that completed in the meantime.

 (4) Fix the counting of acks and nacks in ACK packet to better drive
     congestion management.  We want to know if there have been new
     acks/nacks since the last ACK packet, not that there are still
     acks/nacks.  This is more complicated as we have to save the old SACK
     table and compare it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the counting of new acks and nacks when parsing a packet - something
that is used in congestion control.

As the code stands, it merely notes if there are any nacks whereas what we
really should do is compare the previous SACK table to the new one,
assuming we get two successive ACK packets with nacks in them.  However, we
really don't want to do that if we can avoid it as the tables might not
correspond directly as one may be shifted from the other - something that
will only get harder to deal with once extended ACK tables come into full
use (with a capacity of up to 8192).

Instead, count the number of nacks shifted out of the old SACK, the number
of nacks retained in the portion still active and the number of new acks
and nacks in the new table then calculate what we need.

Note this ends up a bit of an estimate as the Rx protocol allows acks to be
withdrawn by the receiver and packets requested to be retransmitted.

Fixes: d57a3a15 ("rxrpc: Save last ACK's SACK table rather than marking txbufs")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

Stop rxrpc from sending a DUP ACK in response to a PING RESPONSE ACK on a
dead call.  We may have initiated the ping but the call may have beaten the
response to completion.

Fixes: 18bfeba5 ("rxrpc: Perform terminal call ACK/ABORT retransmission from conn processor")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the construction of delayed ACKs to not set the reference serial number
as they can't be used as an RTT reference.

Fixes: 17926a79 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

In the Rx protocol, every packet generated is marked with a per-connection
monotonically increasing serial number.  This number can be referenced in
an ACK packet generated in response to an incoming packet - thereby
allowing the sender to use this for RTT determination, amongst other
things.

However, if the reference field in the ACK is zero, it doesn't refer to any
incoming packet (it could be a ping to find out if a packet got lost, for
example) - so we shouldn't generate zero serial numbers.

Fix the generation of serial numbers to retry if it comes up with a zero.

Furthermore, since the serial numbers are only ever allocated within the
I/O thread this connection is bound to, there's no need for atomics so
remove that too.

Fixes: 17926a79 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

Louis Peens says:

====================
nfp: a few simple driver fixes

This is combining a few unrelated one-liner fixes which have been
floating around internally into a single series. I'm not sure what is
the least amount of overhead for reviewers, this or a separate
submission per-patch? I guess it probably depends on personal
preference, but please let me know if there is a strong preference to
rather split these in the future.

Summary:

Patch1: Fixes an old issue which was hidden because 0 just so happens to
        be the correct value.
Patch2: Fixes a corner case for flower offloading with bond ports
Patch3: Re-enables the 'NETDEV_XDP_ACT_REDIRECT', which was accidentally
        disabled after a previous refactor.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable previously excluded xdp feature flag for NFD3 devices. This
feature flag is required in order to bind nfp interfaces to an xdp
socket and the nfp driver does in fact support the feature.

Fixes: 66c0e13a ("drivers: net: turn on XDP features")
Cc: stable@vger.kernel.org # 6.3+
Signed-off-by: James Hershaw <james.hershaw@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When physical ports are reset (either through link failure or manually
toggled down and up again) that are slaved to a Linux bond with a tunnel
endpoint IP address on the bond device, not all tunnel packets arriving
on the bond port are decapped as expected.

The bond dev assigns the same MAC address to itself and each of its
slaves. When toggling a slave device, the same MAC address is therefore
offloaded to the NFP multiple times with different indexes.

The issue only occurs when re-adding the shared mac. The
nfp_tunnel_add_shared_mac() function has a conditional check early on
that checks if a mac entry already exists and if that mac entry is
global: (entry && nfp_tunnel_is_mac_idx_global(entry->index)). In the
case of a bonded device (For example br-ex), the mac index is obtained,
and no new index is assigned.

We therefore modify the conditional in nfp_tunnel_add_shared_mac() to
check if the port belongs to the LAG along with the existing checks to
prevent a new global mac index from being re-assigned to the slave port.

Fixes: 20cce886 ("nfp: flower: enable MAC address sharing for offloadable devs")
CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Daniel de Villiers <daniel.devilliers@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 1st and 2nd expansion BAR configuration registers are configured,
when the driver starts up, in variables 'barcfg_msix_general' and
'barcfg_msix_xpb', respectively. The 'LengthSelect' field is ORed in
from bit 0, which is incorrect. The 'LengthSelect' field should
start from bit 27.

This has largely gone un-noticed because
NFP_PCIE_BAR_PCIE2CPP_LengthSelect_32BIT happens to be 0.

Fixes: 4cb584e0 ("nfp: add CPP access core")
Cc: stable@vger.kernel.org # 4.11+
Signed-off-by: Daniel Basilio <daniel.basilio@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet_recv_error() is called without holding the socket lock.

IPv6 socket could mutate to IPv4 with IPV6_ADDRFORM
socket option and trigger a KCSAN warning.

Fixes: f4713a3d ("net-timestamp: make tcp_recvmsg call ipv6_recv_error for AF_INET6 socks")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If hv_netvsc driver is unloaded and reloaded, the NET_DEVICE_REGISTER
handler cannot perform VF register successfully as the register call
is received before netvsc_probe is finished. This is because we
register register_netdevice_notifier() very early( even before
vmbus_driver_register()).
To fix this, we try to register each such matching VF( if it is visible
as a netdevice) at the end of netvsc_probe.

Cc: stable@vger.kernel.org
Fixes: 85520856 ("hv_netvsc: Fix race of register_netdevice_notifier and VF register")
Suggested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When qmem_alloc and pfvf->hw_ops->sq_aq_init fails, sq->sg should be
freed to prevent memleak.

Fixes: c9c12d33 ("octeontx2-pf: Add support for PTP clock")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When alloc_scq fails, card->vcs[0] (i.e. vc) should be freed. Otherwise,
in the following call chain:

idt77252_init_one
  |-> idt77252_dev_open
        |-> open_card_ubr0
              |-> alloc_scq [failed]
  |-> deinit_card
        |-> vfree(card->vcs);

card->vcs is freed and card->vcs[0] is leaked.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the ICMPv6 error is built from a non-linear skb we get the following
splat,

  BUG: KASAN: slab-out-of-bounds in do_csum+0x220/0x240
  Read of size 4 at addr ffff88811d402c80 by task netperf/820
  CPU: 0 PID: 820 Comm: netperf Not tainted 6.8.0-rc1+ #543
  ...
   kasan_report+0xd8/0x110
   do_csum+0x220/0x240
   csum_partial+0xc/0x20
   skb_tunnel_check_pmtu+0xeb9/0x3280
   vxlan_xmit_one+0x14c2/0x4080
   vxlan_xmit+0xf61/0x5c00
   dev_hard_start_xmit+0xfb/0x510
   __dev_queue_xmit+0x7cd/0x32a0
   br_dev_queue_push_xmit+0x39d/0x6a0

Use skb_checksum instead of csum_partial who cannot deal with non-linear
SKBs.

Fixes: 4cb47a86 ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For XDP_TX action xdp_buff is converted to xdp_frame. The conversion is
done by xdp_convert_buff_to_frame(). The memory type of the resulting
xdp_frame depends on the memory type of the xdp_buff. For page pool
based xdp_buff it produces xdp_frame with memory type
MEM_TYPE_PAGE_POOL. For zero copy XSK pool based xdp_buff it produces
xdp_frame with memory type MEM_TYPE_PAGE_ORDER0.

tsnep_xdp_xmit_back() is not prepared for that and uses always the page
pool buffer type TSNEP_TX_TYPE_XDP_TX. This leads to invalid mappings
and the transmission of undefined data.

Improve tsnep_xdp_xmit_back() to use the generic buffer type
TSNEP_TX_TYPE_XDP_NDO for zero copy XDP_TX.

Fixes: 3fc23339 ("tsnep: Add XDP socket zero-copy RX support")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
selftests: net: more fixes

Another small bunch of fixes, addressing issues outlined by the
netdev CI.

The first 2 patches are just rebased.

The following 2 are new fixes, for even more problems that surfaced
meanwhile.
====================

Link: https://lore.kernel.org/r/cover.1706812005.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Using hard-coded constant timeout to wait for some expected
event is deemed to fail sooner or later, especially in slow
env.

Our CI has spotted another of such race:
   # TEST: ipv6: cleanup of cached exceptions - nexthop objects          [FAIL]
   #   can't delete veth device in a timely manner, PMTU dst likely leaked

Replace the crude sleep with a loop looking for the expected condition
at low interval for a much longer range.

Fixes: b3cc4f8a ("selftests: pmtu: add explicit tests for PMTU exceptions cleanup")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/fd5c745e9bb665b724473af6a9373a8c2a62b247.1706812005.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The pmtu.sh test uses a few TCP listener in a problematic way:
It hard-codes a constant timeout to wait for the listener starting-up
in background. That introduces unneeded latency and on very slow and
busy host it can fail.

Additionally the test starts again the same listener in the same
namespace on the same port, just after the previous connection
completed. Fast host can attempt starting the new server before the
old one really closed the socket.

Address the issues using the wait_local_port_listen helper and
explicitly waiting for the background listener process exit.

Fixes: 136a1b43 ("selftests: net: test vxlan pmtu exceptions with tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/f8e8f6d44427d8c45e9f6a71ee1a321047452087.1706812005.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The setup_ns helper marks the testns global variable as
readonly. Later attempts to set such variable are unsuccessful,
causing a couple test failures.

Avoid completely the variable re-initialization and let the
function access the global value.

Fixes: e9ce7ede ("selftests: rtnetlink: use setup_ns in bonding test")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/6e7c937c8ff73ca52a21a4a536a13a76ec0173a8.1706812005.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The udpgro_fwd.sh self-tests are somewhat unstable. There are
a few timing constraints the we struggle to meet on very slow
environments.

Instead of skipping the whole tests in such envs, increase the
test resilience WRT very slow hosts: increase the inter-packets
timeouts, avoid resetting the counters every second and finally
disable reduce the background traffic noise.

Tested with:

for I in $(seq 1 100); do
	./tools/testing/selftests/kselftest_install/run_kselftest.sh \
		-t net:udpgro_fwd.sh || exit -1
done

in a slow environment.

Fixes: a062260a ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/f4b6b11064a0d39182a9ae6a853abae3e9b4426a.1706812005.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Function aq_ring_hwts_rx_alloc() maps extra AQ_CFG_RXDS_DEF bytes
for PTP HWTS ring but then generic aq_ring_free() does not take this
into account.
Create and use a specific function to free HWTS ring to fix this
issue.

Trace:
[  215.351607] ------------[ cut here ]------------
[  215.351612] DMA-API: atlantic 0000:4b:00.0: device driver frees DMA memory with different size [device address=0x00000000fbdd0000] [map size=34816 bytes] [unmap size=32768 bytes]
[  215.351635] WARNING: CPU: 33 PID: 10759 at kernel/dma/debug.c:988 check_unmap+0xa6f/0x2360
...
[  215.581176] Call Trace:
[  215.583632]  <TASK>
[  215.585745]  ? show_trace_log_lvl+0x1c4/0x2df
[  215.590114]  ? show_trace_log_lvl+0x1c4/0x2df
[  215.594497]  ? debug_dma_free_coherent+0x196/0x210
[  215.599305]  ? check_unmap+0xa6f/0x2360
[  215.603147]  ? __warn+0xca/0x1d0
[  215.606391]  ? check_unmap+0xa6f/0x2360
[  215.610237]  ? report_bug+0x1ef/0x370
[  215.613921]  ? handle_bug+0x3c/0x70
[  215.617423]  ? exc_invalid_op+0x14/0x50
[  215.621269]  ? asm_exc_invalid_op+0x16/0x20
[  215.625480]  ? check_unmap+0xa6f/0x2360
[  215.629331]  ? mark_lock.part.0+0xca/0xa40
[  215.633445]  debug_dma_free_coherent+0x196/0x210
[  215.638079]  ? __pfx_debug_dma_free_coherent+0x10/0x10
[  215.643242]  ? slab_free_freelist_hook+0x11d/0x1d0
[  215.648060]  dma_free_attrs+0x6d/0x130
[  215.651834]  aq_ring_free+0x193/0x290 [atlantic]
[  215.656487]  aq_ptp_ring_free+0x67/0x110 [atlantic]
...
[  216.127540] ---[ end trace 6467e5964dd2640b ]---
[  216.132160] DMA-API: Mapped at:
[  216.132162]  debug_dma_alloc_coherent+0x66/0x2f0
[  216.132165]  dma_alloc_attrs+0xf5/0x1b0
[  216.132168]  aq_ring_hwts_rx_alloc+0x150/0x1f0 [atlantic]
[  216.132193]  aq_ptp_ring_alloc+0x1bb/0x540 [atlantic]
[  216.132213]  aq_nic_init+0x4a1/0x760 [atlantic]

Fixes: 94ad9455 ("net: aquantia: add PTP rings infrastructure")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240201094752.883026-1-ivecera@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Many syzbot reports include the following trace [1]

If nsim_dev_trap_report_work() can not grab the mutex,
it should rearm itself at least one jiffie later.

[1]
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 32383 Comm: kworker/0:2 Not tainted 6.8.0-rc2-syzkaller-00031-g861c0981 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Workqueue: events nsim_dev_trap_report_work
 RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:89 [inline]
 RIP: 0010:memory_is_nonzero mm/kasan/generic.c:104 [inline]
 RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:129 [inline]
 RIP: 0010:memory_is_poisoned mm/kasan/generic.c:161 [inline]
 RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline]
 RIP: 0010:kasan_check_range+0x101/0x190 mm/kasan/generic.c:189
Code: 07 49 39 d1 75 0a 45 3a 11 b8 01 00 00 00 7c 0b 44 89 c2 e8 21 ed ff ff 83 f0 01 5b 5d 41 5c c3 48 85 d2 74 4f 48 01 ea eb 09 <48> 83 c0 01 48 39 d0 74 41 80 38 00 74 f2 eb b6 41 bc 08 00 00 00
RSP: 0018:ffffc90012dcf998 EFLAGS: 00000046
RAX: fffffbfff258af1e RBX: fffffbfff258af1f RCX: ffffffff8168eda3
RDX: fffffbfff258af1f RSI: 0000000000000004 RDI: ffffffff92c578f0
RBP: fffffbfff258af1e R08: 0000000000000000 R09: fffffbfff258af1e
R10: ffffffff92c578f3 R11: ffffffff8acbcbc0 R12: 0000000000000002
R13: ffff88806db38400 R14: 1ffff920025b9f42 R15: ffffffff92c578e8
FS:  0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000c00994e078 CR3: 000000002c250000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <NMI>
 </NMI>
 <TASK>
  instrument_atomic_read include/linux/instrumented.h:68 [inline]
  atomic_read include/linux/atomic/atomic-instrumented.h:32 [inline]
  queued_spin_is_locked include/asm-generic/qspinlock.h:57 [inline]
  debug_spin_unlock kernel/locking/spinlock_debug.c:101 [inline]
  do_raw_spin_unlock+0x53/0x230 kernel/locking/spinlock_debug.c:141
  __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:150 [inline]
  _raw_spin_unlock_irqrestore+0x22/0x70 kernel/locking/spinlock.c:194
  debug_object_activate+0x349/0x540 lib/debugobjects.c:726
  debug_work_activate kernel/workqueue.c:578 [inline]
  insert_work+0x30/0x230 kernel/workqueue.c:1650
  __queue_work+0x62e/0x11d0 kernel/workqueue.c:1802
  __queue_delayed_work+0x1bf/0x270 kernel/workqueue.c:1953
  queue_delayed_work_on+0x106/0x130 kernel/workqueue.c:1989
  queue_delayed_work include/linux/workqueue.h:563 [inline]
  schedule_delayed_work include/linux/workqueue.h:677 [inline]
  nsim_dev_trap_report_work+0x9c0/0xc80 drivers/net/netdevsim/dev.c:842
  process_one_work+0x886/0x15d0 kernel/workqueue.c:2633
  process_scheduled_works kernel/workqueue.c:2706 [inline]
  worker_thread+0x8b9/0x1290 kernel/workqueue.c:2787
  kthread+0x2c6/0x3a0 kernel/kthread.c:388
  ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
  ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242
 </TASK>

Fixes: 012ec02a ("netdevsim: convert driver to use unlocked devlink API during init/fini")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240201175324.3752746-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

While inlining csum_and_memcpy() into memcpy_to_iter_csum(), the from
address passed to csum_partial_copy_nocheck() was accidentally changed.
This causes a regression in applications using UDP, as for example
OpenAFS, causing loss of datagrams.

Fixes: dc32bff1 ("iov_iter, net: Fold in csum_and_memcpy()")
Cc: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Cc: regressions@lists.linux.dev
Signed-off-by: Michael Lass <bevan@bi-co.net>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 56e58d6c ("net: stmmac: Implement Safety Features in
XGMAC core") checks and reports safety errors, but leaves the
Data Path Parity Errors for each channel in DMA unhandled at all, lead to
a storm of interrupt.
Fix it by checking and clearing the DMA_DPP_Interrupt_Status register.

Fixes: 56e58d6c ("net: stmmac: Implement Safety Features in XGMAC core")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter.

  As Paolo promised we continue to hammer out issues in our selftests.
  This is not the end but probably the peak.

  Current release - regressions:

   - smc: fix incorrect SMC-D link group matching logic

  Current release - new code bugs:

   - eth: bnxt: silence WARN() when device skips a timestamp, it happens

  Previous releases - regressions:

   - ipmr: fix null-deref when forwarding mcast packets

   - conntrack: evaluate window negotiation only for packets in the
     REPLY direction, otherwise SYN retransmissions trigger incorrect
     window scale negotiation

   - ipset: fix performance regression in swap operation

  Previous releases - always broken:

   - tcp: add sanity checks to types of pages getting into the rx
     zerocopy path, we only support basic NIC -> user, no page cache
     pages etc.

   - ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()

   - nt_tables: more input sanitization changes

   - dsa: mt7530: fix 10M/100M speed on MediaTek MT7988 switch

   - bridge: mcast: fix loss of snooping after long uptime, jiffies do
     wrap on 32bit

   - xen-netback: properly sync TX responses, protect with locking

   - phy: mediatek-ge-soc: sync calibration values with MediaTek SDK,
     increase connection stability

   - eth: pds: fixes for various teardown, and reset races

  Misc:

   - hsr: silence WARN() if we can't alloc supervision frame, it
     happens"

* tag 'net-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
  doc/netlink/specs: Add missing attr in rt_link spec
  idpf: avoid compiler padding in virtchnl2_ptype struct
  selftests: mptcp: join: stop transfer when check is done (part 2)
  selftests: mptcp: join: stop transfer when check is done (part 1)
  selftests: mptcp: allow changing subtests prefix
  selftests: mptcp: decrease BW in simult flows
  selftests: mptcp: increase timeout to 30 min
  selftests: mptcp: add missing kconfig for NF Mangle
  selftests: mptcp: add missing kconfig for NF Filter in v6
  selftests: mptcp: add missing kconfig for NF Filter
  mptcp: fix data re-injection from stale subflow
  selftests: net: enable some more knobs
  selftests: net: add missing config for NF_TARGET_TTL
  selftests: forwarding: List helper scripts in TEST_FILES Makefile variable
  selftests: net: List helper scripts in TEST_FILES Makefile variable
  selftests: net: Remove executable bits from library scripts
  selftests: bonding: Check initial state
  selftests: team: Add missing config options
  hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove
  xen-netback: properly sync TX responses
  ...

Pull parisc architecture fixes from Helge Deller:
 "The current exception handler, which helps on kernel accesses to
  userspace, may exhibit data corruption. The problem is that it is not
  guaranteed that the compiler will use the processor register we
  specified in the source code, but may choose another register which
  then will lead to silent register- and data corruption. To fix this
  issue we now use another strategy to help the exception handler to
  always find and set the error code into the correct CPU register.

  The other fixes are small: fixing CPU hotplug bringup, fix the page
  alignment of the RO_DATA section, added a check for the calculated
  cache stride and fix possible hangups when printing longer output at
  bootup when running on serial console.

  Most of the patches are tagged for stable series.

   - Fix random data corruption triggered by exception handler

   - Fix crash when setting up BTLB at CPU bringup

   - Prevent hung tasks when printing inventory on serial console

   - Make RO_DATA page aligned in vmlinux.lds.S

   - Add check for valid cache stride size"

* tag 'parisc-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: BTLB: Fix crash when setting up BTLB at CPU bringup
  parisc: Fix random data corruption from exception handler
  parisc: Drop unneeded semicolon in parse_tree_node()
  parisc: Prevent hung tasks when printing inventory on serial console
  parisc: Check for valid stride size for cache flushes
  parisc: Make RO_DATA page aligned in vmlinux.lds.S

Merge tag 'kbuild-fixes-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix UML build with clang-18 and newer

 - Avoid using the alias attribute in host programs

 - Replace tabs with spaces when followed by conditionals for future GNU
   Make versions

 - Fix rpm-pkg for the systemd-provided kernel-install tool

 - Fix the undefined behavior in Kconfig for a 'int' symbol used in a
   conditional

* tag 'kbuild-fixes-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: initialize sym->curr.tri to 'no' for all symbol types again
  kbuild: rpm-pkg: simplify installkernel %post
  kbuild: Replace tabs with spaces when followed by conditionals
  modpost: avoid using the alias attribute
  kbuild: fix W= flags in the help message
  modpost: Add '.ltext' and '.ltext.*' to TEXT_SECTIONS
  um: Fix adding '-no-pie' for clang
  kbuild: defconf: use SRCARCH to find merged configs

Pull nfsd fix from Chuck Lever:

 - Fix a recent backchannel timeout fix

* tag 'nfsd-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  NFSv4.1: Assign the right value for initval and retries for rpc timeout

Pull exfat fix from Namjae Jeon:

 - Fix BUG in iov_iter_revert reported from syzbot

* tag 'exfat-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: fix zero the unwritten part for dio read

Pull HID fixes from Benjamin Tissoires:

 - cleanups in the error path in hid-steam (Dan Carpenter)

 - fixes for Wacom tablets selftests that sneaked in while the CI was
   taking a break during the year end holidays (Benjamin Tissoires)

 - null pointer check in nvidia-shield (Kunwu Chan)

 - memory leak fix in hidraw (Su Hui)

 - another null pointer fix in i2c-hid-of (Johan Hovold)

 - another memory leak fix in HID-BPF this time, as well as a double
   fdget() fix reported by Dan Carpenter (Benjamin Tissoires)

 - fix for Cirque touchpad when they go on suspend (Kai-Heng Feng)

 - new device ID in hid-logitech-hidpp: "Logitech G Pro X SuperLight 2"
   (Jiri Kosina)

* tag 'hid-for-linus-2024020101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: bpf: use __bpf_kfunc instead of noinline
  HID: bpf: actually free hdev memory after attaching a HID-BPF program
  HID: bpf: remove double fdget()
  HID: i2c-hid-of: fix NULL-deref on failed power up
  HID: hidraw: fix a problem of memory leak in hidraw_release()
  HID: i2c-hid: Skip SET_POWER SLEEP for Cirque touchpad on system suspend
  HID: nvidia-shield: Add missing null pointer checks to LED initialization
  HID: logitech-hidpp: add support for Logitech G Pro X Superlight 2
  selftests/hid: wacom: fix confidence tests
  HID: hid-steam: Fix cleanup in probe()
  HID: hid-steam: remove pointless error message

Merge tag 'firewire-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fixes from Takashi Sakamoto:
 "FireWire subsystem now supports the legacy layout of configuration
  ROM, while it appears that some of DV devices in the early 2000's have
  the legacy layout with a quirk. This includes some changes to handle
  the quirk"

* tag 'firewire-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: core: search descriptor leaf just after vendor directory entry in root directory
  firewire: core: correct documentation of fw_csr_string() kernel API

Pull spi fix from Mark Brown:
 "One simple fix for a minor but valid issue with constants overflowing
  identified via cppcheck"

* tag 'spi-fix-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: sh-msiof: avoid integer overflow in constants

Merge tag 'regulator-fix-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "The main set of fixes here are for the PWM regulator, fixing
  bootstrapping issues on some platforms where the hardware setup looked
  like it was out of spec for the constraints we have for the regulator
  causing us to make spurious and unhelpful changes to try to bring
  things in line with the constraints.

  There's also a couple of other driver specific fixes"

* tag 'regulator-fix-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator (max5970): Fix IRQ handler
  regulator: ti-abb: don't use devm_platform_ioremap_resource_byname for shared interrupt register
  regulator: pwm-regulator: Manage boot-on with disabled PWM channels
  regulator: pwm-regulator: Calculate the output voltage for disabled PWMs
  regulator: pwm-regulator: Add validity checks in continuous .get_voltage

Pull crypto fixes from Herbert Xu:
 "Fix regressions in caam and qat"

* tag 'v6.8-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: caam - fix asynchronous hash
  crypto: qat - fix arbiter mapping generation algorithm for QAT 402xx

Pull lsm fixes from Paul Moore:
 "Two small patches to fix some problems relating to LSM hook return
  values and how the individual LSMs interact"

* tag 'lsm-pr-20240131' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  lsm: fix default return value of the socket_getpeersec_*() hooks
  lsm: fix the logic in security_inode_getsecctx()

Simon Wunderlich says:

====================
Here are some batman-adv bugfixes:

 - fix a timeout issue and a memory leak in batman-adv multicast,
   by Linus Lüssing (2 patches)

* tag 'batadv-net-pullrequest-20240201' of git://git.open-mesh.org/linux-merge:
  batman-adv: mcast: fix memory leak on deleting a batman-adv interface
  batman-adv: mcast: fix mcast packet type counter on timeouted nodes
====================

Link: https://lore.kernel.org/r/20240201110110.29129-1-sw@simonwunderlich.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>