Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

- Set stream signal type to be SST when setting non-tile timing on MST
  tiled display.
  - Disable MST on sink after disabling MST link.
  - Enable MST on sink before enabling MST link.
Signed-off-by: Ding Wang <Ding.Wang@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In MST case during removal of remote sink its descriptor pointer wasn't freed corectly.
Signed-off-by: Leon Elazar <leon.elazar@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

- Adding dm controlled signal type in dc_stream
- Adding fallback to dvi signal when output signal is hdmi and the connector
  type is not
Signed-off-by: Sylvia Tsai <sylvia.tsai@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Sylvia Tsai <Sylvia.Tsai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1. get_ss_info_from_atombios function was allocating the memory populating the provided pointer
but them freeing the memory.
Since the pointer was return as a valid value, we are trying to free the same memory during clock resource destruction
Signed-off-by: Leon Elazar <leon.elazar@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

- Remove x,y hotspot from dc_cursor_attributes. Only program it
  through setPosition.
Signed-off-by: Zeyu Fan <Zeyu.Fan@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Zeyu Fan <Zeyu.Fan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Make sure we do not program a hw pageflip inside vblank 'n' iff the
atomic flip is comitted while inside the same vblank 'n'. We must
defer such a flip by one refresh cycle to vblank 'n+1', unless this
is a DRM_MODE_PAGE_FLIP_ASYNC async pageflip, which must always
execute as soon as possible.

Without this, pageflips programmed via X11 GLX_OML_sync_control extensions
glXSwapBuffersMscOML(..., target_msc, ...); call and/or via DRI3/Present
PresentPixmap(..., target_msc, ...); request will complete one vblank
too early whenever target_msc > current_msc + 1, ie. more than 1 vblank
in the future. In such a case, the call of the pageflip ioctl() would be
triggered by a queued drmWaitVblank() vblank event, which itself gets
dispatched inside the vblank one frame before the target_msc vblank.

Testing with this patch does no longer show any problems with
OML_sync_control swap scheduling or flip completion timestamps.
Tested on R9 380 Tonga.

v2: Add acked/r-b by Harry and Michel.
v3: Feedback from Andrey: Must not wait an extra frame for
    DRM_MODE_PAGE_FLIP_ASYNC flips.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Harry Wentland <harry.wentland@amd.com> (v1)
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>

Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Since DC now uses CRTC_VERTICAL_INTERRUPT0 as VBLANK irq trigger
and vblank interrupts actually happen earliest at start of vblank,
instead of a bit before vblank, we no longer need some of the
fudging logic to deal with too early vblank irq handling (grep for
lb_vblank_lead_lines). This itself fixes a pageflip scheduling
bug in DC, caused by uninitialized  use of lb_vblank_lead_lines,
with a wrong startup value of 0. Thanks to the new vblank irq
trigger this value of zero is now actually correct for DC :).

A new problem is that vblank irq's race against pflip irq's,
and as both can fire at first line of vblank, it is no longer
guaranteed that vblank irq handling (therefore -> drm_handle_vblank()
-> drm_update_vblank_count()) executes before pflip irq handling
for a given vblank interval when a pageflip completes. Therefore
the vblank count and timestamps emitted to user-space as part of
the pageflip completion event will be often stale and cause new
timestamping and swap scheduling errors in user-space.

This was observed with large frequency on R9 380 Tonga Pro.

Fix this by enforcing a vblank count+timestamp update right
before emitting the pageflip completion event from the pflip
irq handler. The logic in core drm_update_vblank_count() makes
sure that no redundant or conflicting updates happen, iow. the
call turns into a no-op if it wasn't needed for that vblank,
burning a few microseconds of cpu time though.

Successfully tested on AMD R9 380 "Tonga Pro" (VI/DCE 10)
with DC enabled on the current DC staging branch. Independent
measurement of pageflip completion timing with special hardware
measurement equipment now confirms correct pageflip timestamps
and counts in the pageflip completion events.

v2: Review comments by Michel, drop outdated paragraph
    about problem already fixed in 2nd patch of the series.
    Add acked/r-b by Harry and Michel.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Harry Wentland <harry.wentland@amd.com> (v1)
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

DRM_IOCTL_MODE_GETCONNECTOR fails with EINVAL on enabling DRIVER_ATOMIC
With this DRM_IOCTL_MODE_GETCONNECTOR returns all the connector properties.
freesync_property and freesync_capable_property return 0 currently.

TESTS(On Chromium OS on Stoney Only)
* Builds without compilation errors.
* 'atomictest' proceeds after applying patch and fails with vblank event
timed out.
* Chromium OS ui comes up.
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We still rely on legacy properties. Fallback on legacy properties until
we get to pull these into some atomic state.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

4.9 kernel will always add the assigned crtc to possible_crtcs on a
plane. This is no longer the case on newer kernels. Make sure we allow
any plane on any crtc.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Avoid enabling CRTC_VERTICAL_INTERRUPT0 twice on resume.
It's enabled once from within manage_dm_interrupts in mode set
and another explicitly from amdgpu_dm_irq_resume_late.
Seems it lead to CRTC hang.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

PPLib is now calling into DC to get vrefresh and min_vblank_time, but
since full bandwidth calcs are missing for those generations, the pplib
structures were never being filled. This change fills the currently
required fields to prevent screen corruption.
Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

- Correct the aux channel selection according to DAL3
Signed-off-by: Amy Zhang <Amy.Zhang@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Allow Linux to use DRM provided EDID read functioality
by moving  DAL edid implementation to module hence
removing this code from DC by this cleaning up DC
code for upstream.

v2: Removing ddc_service. No more need for it.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

I2C_M_RD was translated to write instead of read.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Keep 1:1 relation between MST sink and it's MST connector.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We can keep a 1:1 relation between a link and a physical
connector and hence skip the iteration. This function
is used in context of only physical connetors.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Zeyu Fan <Zeyu.Fan@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Reza Amini <reza.amini@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Surface information is by default copied from old context in dc_commit_stream.
Thus unchange streams will not be affected. For new streams, we shouldn't
validate the new mode against the surface configuration of old_context.
Signed-off-by: Reza Amini <reza.amini@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch introduces amdgpu_drm_plane_state
structure, which subclasses drm_plane_state and
holds data suitable for configuring hardware.

It switches reset(), atomic_duplicate_state()
& atomic_destroy_state() functions to new internal
implementation, earlier they were pointing to
drm core functions.

TESTS(On Chromium OS on Stoney Only)
* Builds without compilation errors.
* 'plane_test' passes for XR24 format
  based Overlay plane.
* Chromium OS ui comes up.
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Current design has per-crtc-plane model.
As a result, for asic's that support underlay,
are unable to expose it to user space for modesetting.

To enable this, the drm driver intialisation now runs
for number of surfaces instead of stream/crtc.

This patch plumbs surface capabilities to drm framework
so that it can be effectively used by user space.

Tests: (On Chromium OS for Stoney Only)
* 'modetest -p'  now shows additional plane
  with YUV capabilities in case of CZ and ST.
* 'plane_test' fails with below error:
  [drm:amdgpu_dm_connector_atomic_set_property [amdgpu]] *ERROR* Unsupported screen depth 0
  as ther is no support for YUYV
* Checked multimonitor display works fine
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

ASICs using bios parser 1 don't check HBR3 capability as there is no such
a bit usHBR3En in ATOM_ENCODER_CAP_RECORDER.
Therefore, will use ATOM_ENCODER_CAP_RECORDER_V2 and thus obtain the usHBR3En
bit.
Signed-off-by: Ding Wang <ding.wang@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Frame sequential, top-bottom and side-by-side support.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In some use-cases, e.g. multiple 4K displays,
exisitng wait time for reg update of 30msec timed out
during mode setiing that sometimes resulted in system bad state
as we continue without waiting for registry update complete.
Increasing timeout to 35msec fixes that problem.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Register ISR hnadler on the new interrupt.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

VBLANK interrupt is driven bu line buffer vcounter which is
ahead of CRTC vcounter. Use an interrupt that fires at the actual
CRTC vblank start boundry.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>