- 17 Jun, 2019 4 commits
-
-
Eric Dumazet authored
commit 967c05ae upstream. If mtu probing is enabled tcp_mtu_probing() could very well end up with a too small MSS. Use the new sysctl tcp_min_snd_mss to make sure MSS search is performed in an acceptable range. CVE-2019-11479 -- tcp mss hardcoded to 48 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Cc: Jonathan Looney <jtl@netflix.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Bruce Curtis <brucec@netflix.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
commit 5f3e2bf0 upstream. Some TCP peers announce a very small MSS option in their SYN and/or SYN/ACK messages. This forces the stack to send packets with a very high network/cpu overhead. Linux has enforced a minimal value of 48. Since this value includes the size of TCP options, and that the options can consume up to 40 bytes, this means that each segment can include only 8 bytes of payload. In some cases, it can be useful to increase the minimal value to a saner value. We still let the default to 48 (TCP_MIN_SND_MSS), for compatibility reasons. Note that TCP_MAXSEG socket option enforces a minimal value of (TCP_MIN_MSS). David Miller increased this minimal value in commit c39508d6 ("tcp: Make TCP_MAXSEG minimum more correct.") from 64 to 88. We might in the future merge TCP_MIN_SND_MSS and TCP_MIN_MSS. CVE-2019-11479 -- tcp mss hardcoded to 48 Signed-off-by:
Jonathan Looney <jtl@netflix.com> Acked-by:
-
Eric Dumazet authored
commit f070ef2a upstream. Jonathan Looney reported that a malicious peer can force a sender to fragment its retransmit queue into tiny skbs, inflating memory usage and/or overflow 32bit counters. TCP allows an application to queue up to sk_sndbuf bytes, so we need to give some allowance for non malicious splitting of retransmit queue. A new SNMP counter is added to monitor how many times TCP did not allow to split an skb if the allowance was exceeded. Note that this counter might increase in the case applications use SO_SNDBUF socket option to lower sk_sndbuf. CVE-2019-11478 : tcp_fragment, prevent fragmenting a packet when the socket is already using more than half the allowed space Signed-off-by:
Yuchung Cheng <ycheng@google.com> Reviewed-by:
Tyler Hicks <tyhicks@canonical.com> Cc: Bruce Curtis <brucec@netflix.com> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by:
-
Eric Dumazet authored
commit 3b4929f6 upstream. Jonathan Looney reported that TCP can trigger the following crash in tcp_shifted_skb() : BUG_ON(tcp_skb_pcount(skb) < pcount); This can happen if the remote peer has advertized the smallest MSS that linux TCP accepts : 48 An skb can hold 17 fragments, and each fragment can hold 32KB on x86, or 64KB on PowerPC. This means that the 16bit witdh of TCP_SKB_CB(skb)->tcp_gso_segs can overflow. Note that tcp_sendmsg() builds skbs with less than 64KB of payload, so this problem needs SACK to be enabled. SACK blocks allow TCP to coalesce multiple skbs in the retransmit queue, thus filling the 17 fragments to maximal capacity. CVE-2019-11477 -- u16 overflow of TCP_SKB_CB(skb)->tcp_gso_segs Fixes: 832d11c5 ("tcp: Try to restore large SKBs while SACK processing") Signed-off-by:
-
- 15 Jun, 2019 36 commits
-
-
Greg Kroah-Hartman authored
-
Jens Axboe authored
commit 44a9bd18 upstream. The test case we have is rightfully failing with the current kernel: io_uring_setup(1, 0x7ffe2cafebe0), flags: IORING_SETUP_SQPOLL|IORING_SETUP_SQ_AFF, resv: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000, sq_thread_cpu: 4 expected -1, got 3 This is in a vm, and CPU3 is the last valid one, hence asking for 4 should fail the setup with -EINVAL, not succeed. The problem is that we're using array_index_nospec() with nr_cpu_ids as the index, hence we wrap and end up using CPU0 instead of CPU4. This makes the setup succeed where it should be failing. We don't need to use array_index_nospec() as we're not indexing any array with this. Instead just compare with nr_cpu_ids directly. This is fine as we're checking with cpu_online() afterwards. Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Takashi Iwai authored
commit 7c32ae35 upstream. The call of unsubscribe_port() which manages the group count and module refcount from delete_and_unsubscribe_port() looks racy; it's not covered by the group list lock, and it's likely a cause of the reported unbalance at port deletion. Let's move the call inside the group list_mutex to plug the hole. Reported-by: syzbot+e4c8abb920efa77bace9@syzkaller.appspotmail.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Amir Goldstein authored
commit 9e46b840 upstream. Overlay file f_pos is the master copy that is preserved through copy up and modified on read/write, but only real fs knows how to SEEK_HOLE/SEEK_DATA and real fs may impose limitations that are more strict than ->s_maxbytes for specific files, so we use the real file to perform seeks. We do not call real fs for SEEK_CUR:0 query and for SEEK_SET:0 requests. Fixes: d1d04ef8 ("ovl: stack file ops") Reported-by:
Eddie Horng <eddiehorng.tw@gmail.com> Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Jiufei Xue authored
commit 98487de3 upstream. We found that it return success when we set IMMUTABLE_FL flag to a file in docker even though the docker didn't have the capability CAP_LINUX_IMMUTABLE. The commit d1d04ef8 ("ovl: stack file ops") and dab5ca8f ("ovl: add lsattr/chattr support") implemented chattr operations on a regular overlay file. ovl_real_ioctl() overridden the current process's subjective credentials with ofs->creator_cred which have the capability CAP_LINUX_IMMUTABLE so that it will return success in vfs_ioctl()->cap_capable(). Fix this by checking the capability before cred overridden. And here we only care about APPEND_FL and IMMUTABLE_FL, so get these information from inode. [SzM: move check and call to underlying fs inside inode locked region to prevent two such calls from racing with each other] Signed-off-by:
Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 1e07d637 which is commit b30a43ac upstream. Sven reports: Commit 1e07d637 ("drm/nouveau: add kconfig option to turn off nouveau legacy contexts. (v3)") has caused a build failure for me when I actually tried that option (CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=n): ,---- | Kernel: arch/x86/boot/bzImage is ready (#1) | Building modules, stage 2. | MODPOST 290 modules | ERROR: "drm_legacy_mmap" [drivers/gpu/drm/nouveau/nouveau.ko] undefined! | scripts/Makefile.modpost:91: recipe for target '__modpost' failed `---- Upstream does not have that problem, as commit bed2dd84 ("drm/ttm: Quick-test mmap offset in ttm_bo_mmap()") has removed the use of drm_legacy_mmap from nouveau_ttm.c. Unfortunately that commit does not apply in 5.1.9. The ensuing discussion proposed a number of one-off patches, but no solid agreement was made, so just revert the commit for now to get people's systems building again. Reported-by:
Sven Joachim <svenjoac@gmx.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Thomas Backlund <tmb@mageia.org> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 07e38998 which is commit d5bb334a upstream. Lots of people have reported issues with this patch, and as there does not seem to be a fix going into Linus's kernel tree any time soon, revert the commit in the stable trees so as to get people's machines working properly again. Reported-by:
Vasily Khoruzhick <anarsoul@gmail.com> Reported-by:
Hans de Goede <hdegoede@redhat.com> Cc: Jeremy Cline <jeremy@jcline.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Dennis Zhou authored
[ Upstream commit 8c43004a ] pcpu_find_block_fit() guarantees that a fit is found within PCPU_BITMAP_BLOCK_BITS. Iteration is used to determine the first fit as it compares against the block's contig_hint. This can lead to incorrectly scanning past the end of the bitmap. The behavior was okay given the check after for bit_off >= end and the correctness of the hints from pcpu_find_block_fit(). This patch fixes this by bounding the end offset by the number of bits in a chunk. Signed-off-by:
Dennis Zhou <dennis@kernel.org> Reviewed-by:
Peng Fan <peng.fan@nxp.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Andrey Smirnov authored
[ Upstream commit 338aa107 ] Fix the warning produced by gpiochip_set_irq_hooks() by allocating a dedicated IRQ chip per GPIO chip/port. Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-imx@nxp.com Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Marek Vasut authored
[ Upstream commit d5aa8408 ] Porter needs the regulator quirk, just like the other boards. But unlike the other boards, the Porter uses DA9063L, which is at 0x5a. Otherwise, DA9063L and DA9210 IRQ line is still connected to CPU IRQ2 . Signed-off-by:
Marek Vasut <marek.vasut+renesas@gmail.com> Acked-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Takeshi Kihara authored
[ Upstream commit 15160f6d ] The Product Register of R-Car M3-W ES1.3 incorrectly identifies the SoC revision as ES2.1. Add a workaround to fix this. Signed-off-by:
Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 32a155b1 ] The datasheet says the vconn MUST be off when we start toggling. The tcpm.c state-machine is responsible to make sure vconn is off, but lets add a WARN to catch any cases where vconn is not off for some reason. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit 4d8e3e95 ] During early system resume on Exynos5422 with performance counters enabled the following kernel oops happens: Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1433 Comm: bash Tainted: G W 5.0.0-rc5-next-20190208-00023-gd5fb5a8a13e6-dirty #5480 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) ... Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 4451006a DAC: 00000051 Process bash (pid: 1433, stack limit = 0xb7e0e22f) ... (reset_ctrl_regs) from [<c0112ad0>] (dbg_cpu_pm_notify+0x1c/0x24) (dbg_cpu_pm_notify) from [<c014c840>] (notifier_call_chain+0x44/0x84) (notifier_call_chain) from [<c014cbc0>] (__atomic_notifier_call_chain+0x7c/0x128) (__atomic_notifier_call_chain) from [<c01ffaac>] (cpu_pm_notify+0x30/0x54) (cpu_pm_notify) from [<c055116c>] (syscore_resume+0x98/0x3f4) (syscore_resume) from [<c0189350>] (suspend_devices_and_enter+0x97c/0xe74) (suspend_devices_and_enter) from [<c0189fb8>] (pm_suspend+0x770/0xc04) (pm_suspend) from [<c0187740>] (state_store+0x6c/0xcc) (state_store) from [<c09fa698>] (kobj_attr_store+0x14/0x20) (kobj_attr_store) from [<c030159c>] (sysfs_kf_write+0x4c/0x50) (sysfs_kf_write) from [<c0300620>] (kernfs_fop_write+0xfc/0x1e0) (kernfs_fop_write) from [<c0282be8>] (__vfs_write+0x2c/0x160) (__vfs_write) from [<c0282ea4>] (vfs_write+0xa4/0x16c) (vfs_write) from [<c0283080>] (ksys_write+0x40/0x8c) (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28) Undefined instruction is triggered during CP14 reset, because bits: #16 (Secure privileged invasive debug disabled) and #17 (Secure privileged noninvasive debug disable) are set in DSCR. Those bits depend on SPNIDEN and SPIDEN lines, which are provided by Secure JTAG hardware block. That block in turn is powered from cluster 0 (big/Eagle), but the Exynos5422 boots on cluster 1 (LITTLE/KFC). To fix this issue it is enough to turn on the power on the cluster 0 for a while. This lets the Secure JTAG block to propagate the needed signals to LITTLE/KFC cores and change their DSCR. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Phong Hoang authored
[ Upstream commit 347ab948 ] This patch fixes deadlock warning if removing PWM device when CONFIG_PROVE_LOCKING is enabled. This issue can be reproceduced by the following steps on the R-Car H3 Salvator-X board if the backlight is disabled: # cd /sys/class/pwm/pwmchip0 # echo 0 > export # ls device export npwm power pwm0 subsystem uevent unexport # cd device/driver # ls bind e6e31000.pwm uevent unbind # echo e6e31000.pwm > unbind [ 87.659974] ====================================================== [ 87.666149] WARNING: possible circular locking dependency detected [ 87.672327] 5.0.0 #7 Not tainted [ 87.675549] ------------------------------------------------------ [ 87.681723] bash/2986 is trying to acquire lock: [ 87.686337] 000000005ea0e178 (kn->count#58){++++}, at: kernfs_remove_by_name_ns+0x50/0xa0 [ 87.694528] [ 87.694528] but task is already holding lock: [ 87.700353] 000000006313b17c (pwm_lock){+.+.}, at: pwmchip_remove+0x28/0x13c [ 87.707405] [ 87.707405] which lock already depends on the new lock. [ 87.707405] [ 87.715574] [ 87.715574] the existing dependency chain (in reverse order) is: [ 87.723048] [ 87.723048] -> #1 (pwm_lock){+.+.}: [ 87.728017] __mutex_lock+0x70/0x7e4 [ 87.732108] mutex_lock_nested+0x1c/0x24 [ 87.736547] pwm_request_from_chip.part.6+0x34/0x74 [ 87.741940] pwm_request_from_chip+0x20/0x40 [ 87.746725] export_store+0x6c/0x1f4 [ 87.750820] dev_attr_store+0x18/0x28 [ 87.754998] sysfs_kf_write+0x54/0x64 [ 87.759175] kernfs_fop_write+0xe4/0x1e8 [ 87.763615] __vfs_write+0x40/0x184 [ 87.767619] vfs_write+0xa8/0x19c [ 87.771448] ksys_write+0x58/0xbc [ 87.775278] __arm64_sys_write+0x18/0x20 [ 87.779721] el0_svc_common+0xd0/0x124 [ 87.783986] el0_svc_compat_handler+0x1c/0x24 [ 87.788858] el0_svc_compat+0x8/0x18 [ 87.792947] [ 87.792947] -> #0 (kn->count#58){++++}: [ 87.798260] lock_acquire+0xc4/0x22c [ 87.802353] __kernfs_remove+0x258/0x2c4 [ 87.806790] kernfs_remove_by_name_ns+0x50/0xa0 [ 87.811836] remove_files.isra.1+0x38/0x78 [ 87.816447] sysfs_remove_group+0x48/0x98 [ 87.820971] sysfs_remove_groups+0x34/0x4c [ 87.825583] device_remove_attrs+0x6c/0x7c [ 87.830197] device_del+0x11c/0x33c [ 87.834201] device_unregister+0x14/0x2c [ 87.838638] pwmchip_sysfs_unexport+0x40/0x4c [ 87.843509] pwmchip_remove+0xf4/0x13c [ 87.847773] rcar_pwm_remove+0x28/0x34 [ 87.852039] platform_drv_remove+0x24/0x64 [ 87.856651] device_release_driver_internal+0x18c/0x21c [ 87.862391] device_release_driver+0x14/0x1c [ 87.867175] unbind_store+0xe0/0x124 [ 87.871265] drv_attr_store+0x20/0x30 [ 87.875442] sysfs_kf_write+0x54/0x64 [ 87.879618] kernfs_fop_write+0xe4/0x1e8 [ 87.884055] __vfs_write+0x40/0x184 [ 87.888057] vfs_write+0xa8/0x19c [ 87.891887] ksys_write+0x58/0xbc [ 87.895716] __arm64_sys_write+0x18/0x20 [ 87.900154] el0_svc_common+0xd0/0x124 [ 87.904417] el0_svc_compat_handler+0x1c/0x24 [ 87.909289] el0_svc_compat+0x8/0x18 [ 87.913378] [ 87.913378] other info that might help us debug this: [ 87.913378] [ 87.921374] Possible unsafe locking scenario: [ 87.921374] [ 87.927286] CPU0 CPU1 [ 87.931808] ---- ---- [ 87.936331] lock(pwm_lock); [ 87.939293] lock(kn->count#58); [ 87.945120] lock(pwm_lock); [ 87.950599] lock(kn->count#58); [ 87.953908] [ 87.953908] *** DEADLOCK *** [ 87.953908] [ 87.959821] 4 locks held by bash/2986: [ 87.963563] #0: 00000000ace7bc30 (sb_writers#6){.+.+}, at: vfs_write+0x188/0x19c [ 87.971044] #1: 00000000287991b2 (&of->mutex){+.+.}, at: kernfs_fop_write+0xb4/0x1e8 [ 87.978872] #2: 00000000f739d016 (&dev->mutex){....}, at: device_release_driver_internal+0x40/0x21c [ 87.988001] #3: 000000006313b17c (pwm_lock){+.+.}, at: pwmchip_remove+0x28/0x13c [ 87.995481] [ 87.995481] stack backtrace: [ 87.999836] CPU: 0 PID: 2986 Comm: bash Not tainted 5.0.0 #7 [ 88.005489] Hardware name: Renesas Salvator-X board based on r8a7795 ES1.x (DT) [ 88.012791] Call trace: [ 88.015235] dump_backtrace+0x0/0x190 [ 88.018891] show_stack+0x14/0x1c [ 88.022204] dump_stack+0xb0/0xec [ 88.025514] print_circular_bug.isra.32+0x1d0/0x2e0 [ 88.030385] __lock_acquire+0x1318/0x1864 [ 88.034388] lock_acquire+0xc4/0x22c [ 88.037958] __kernfs_remove+0x258/0x2c4 [ 88.041874] kernfs_remove_by_name_ns+0x50/0xa0 [ 88.046398] remove_files.isra.1+0x38/0x78 [ 88.050487] sysfs_remove_group+0x48/0x98 [ 88.054490] sysfs_remove_groups+0x34/0x4c [ 88.058580] device_remove_attrs+0x6c/0x7c [ 88.062671] device_del+0x11c/0x33c [ 88.066154] device_unregister+0x14/0x2c [ 88.070070] pwmchip_sysfs_unexport+0x40/0x4c [ 88.074421] pwmchip_remove+0xf4/0x13c [ 88.078163] rcar_pwm_remove+0x28/0x34 [ 88.081906] platform_drv_remove+0x24/0x64 [ 88.085996] device_release_driver_internal+0x18c/0x21c [ 88.091215] device_release_driver+0x14/0x1c [ 88.095478] unbind_store+0xe0/0x124 [ 88.099048] drv_attr_store+0x20/0x30 [ 88.102704] sysfs_kf_write+0x54/0x64 [ 88.106359] kernfs_fop_write+0xe4/0x1e8 [ 88.110275] __vfs_write+0x40/0x184 [ 88.113757] vfs_write+0xa8/0x19c [ 88.117065] ksys_write+0x58/0xbc [ 88.120374] __arm64_sys_write+0x18/0x20 [ 88.124291] el0_svc_common+0xd0/0x124 [ 88.128034] el0_svc_compat_handler+0x1c/0x24 [ 88.132384] el0_svc_compat+0x8/0x18 The sysfs unexport in pwmchip_remove() is completely asymmetric to what we do in pwmchip_add_with_polarity() and commit 0733424c ("pwm: Unexport children before chip removal") is a strong indication that this was wrong to begin with. We should just move pwmchip_sysfs_unexport() where it belongs, which is right after pwmchip_sysfs_unexport_children(). In that case, we do not need separate functions anymore either. We also really want to remove sysfs irrespective of whether or not the chip will be removed as a result of pwmchip_remove(). We can only assume that the driver will be gone after that, so we shouldn't leave any dangling sysfs files around. This warning disappears if we move pwmchip_sysfs_unexport() to the top of pwmchip_remove(), pwmchip_sysfs_unexport_children(). That way it is also outside of the pwm_lock section, which indeed doesn't seem to be needed. Moving the pwmchip_sysfs_export() call outside of that section also seems fine and it'd be perfectly symmetric with pwmchip_remove() again. So, this patch fixes them. Signed-off-by:
Phong Hoang <phong.hoang.wz@renesas.com> [shimoda: revise the commit log and code] Fixes: 76abbdde ("pwm: Add sysfs interface") Fixes: 0733424c ("pwm: Unexport children before chip removal") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by:
Hoan Nguyen An <na-hoan@jinso.co.jp> Reviewed-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
[ Upstream commit 5ab99cf7 ] The PVDD_APIO_1V8 (LDO2) and PVDD_ABB_1V8 (LDO8) regulators were turned off by Linux kernel as unused. However they supply critical parts of SoC so they should be always on: 1. PVDD_APIO_1V8 supplies SYS pins (gpx[0-3], PSHOLD), HDMI level shift, RTC, VDD1_12 (DRAM internal 1.8 V logic), pull-up for PMIC interrupt lines, TTL/UARTR level shift, reset pins and SW-TACT1 button. It also supplies unused blocks like VDDQ_SRAM (for SROM controller) and VDDQ_GPIO (gpm7, gpy7). The LDO2 cannot be turned off (S2MPS11 keeps it on anyway) so marking it "always-on" only reflects its real status. 2. PVDD_ABB_1V8 supplies Adaptive Body Bias Generator for ARM cores, memory and Mali (G3D). Signed-off-by:
-
Sakari Ailus authored
[ Upstream commit 9d386373 ] The lack of defaults provided by the caller to v4l2_fwnode_endpoint_parse() signals the use of the default lane mapping. The default lane mapping must not be used however if the firmmare contains the lane mapping. Disable the default lane mapping in that case, and improve the debug messages telling of the use of the defaults. This was missed previously since the default mapping will only unsed in this case if the bus type is set, and no driver did both while still needing the lane mapping configuration. Fixes: b4357d21 ("media: v4l: fwnode: Support default CSI-2 lane mapping for drivers") Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Christoph Vogtländer authored
[ Upstream commit b00ef530 ] It must be made sure that immediate mode is not already set, when modifying shadow register value in ehrpwm_pwm_disable(). Otherwise modifications to the action-qualifier continuous S/W force register(AQSFRC) will be done in the active register. This may happen when both channels are being disabled. In this case, only the first channel state will be recorded as disabled in the shadow register. Later, when enabling the first channel again, the second channel would be enabled as well. Setting RLDCSF to zero, first, ensures that the shadow register is updated as desired. Fixes: 38dabd91 ("pwm: tiehrpwm: Fix disabling of output of PWMs") Signed-off-by:
Christoph Vogtländer <c.vogtlaender@sigma-surface-science.com> [vigneshr@ti.com: Improve commit message] Signed-off-by:
Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit 5ba846b1 ] Intel IOMMU, when enabled, tries to find the domain of the device, assuming it's a PCI one, during DMA operations, such as mapping or unmapping. Since we are splitting the actual PCI device to couple of children via MFD framework (see drivers/mfd/intel-lpss.c for details), the DMA device appears to be a platform one, and thus not an actual one that performs DMA. In a such situation IOMMU can't find or allocate a proper domain for its operations. As a result, all DMA operations are failed. In order to fix this, supply parent of the platform device to the DMA engine framework and fix filter functions accordingly. We may rely on the fact that parent is a real PCI device, because no other configuration is present in the wild. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Mark Brown <broonie@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [for tty parts] Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Christopher N Bednarz authored
[ Upstream commit b58dafbc ] LB_EN for prune switch rules was causing all TX traffic to loopback to the internal switch and dropped. When running bi-directional stress workloads with RDMA the RDPU would hang blocking tx and rx traffic. Signed-off-by:
Christopher N Bednarz <christopher.n.bednarz@intel.com> Reviewed-by:
Bruce Allan <bruce.w.allan@intel.com> Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
[ Upstream commit 277b3a45 ] In VEB mode, enable LAN_EN bit in the action fields for filter rules corresponding to the right recipes. Signed-off-by:
Yashaswini Raghuram Prathivadi Bhayankaram <yashaswini.raghuram.prathivadi.bhayankaram@intel.com> Reviewed-by:
-
Sven Eckelmann authored
[ Upstream commit c2d8b9a6 ] The send functions in batman-adv are expected to consume the skb when either the data is queued up for the underlying driver or when some precondition failed. batadv_dat_send_data didn't do this and instead created a copy of the skb, modified it and queued the copy up for transmission. The caller has to take care that the skb is handled correctly (for example free'd) when batadv_dat_send_data returns. This unclear behavior already lead to memory leaks in the recent past. Renaming the function to batadv_dat_forward_data should make it easier to identify that the data is forwarded but the skb is not actually send+consumed. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Dafna Hirschfeld authored
[ Upstream commit 09ca38a5 ] If one of the controls fails to set, then 'v4l2_ctrl_request_setup' immediately returns with the error code. Signed-off-by:
Dafna Hirschfeld <dafna3@gmail.com> Reviewed-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Brett Creeley authored
[ Upstream commit 203a068a ] Currently we aren't checking for the ICE_FC_NONE case for the current flow control mode. This is causing "Unknown" to be printed for the current flow control method if flow control is disabled. Fix this by adding the case for ICE_FC_NONE to print "None". Signed-off-by:
Brett Creeley <brett.creeley@intel.com> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 21e2118f ] We need to only apply errata 1.101 handling to clear non-wakeup edge gpios for idle to the gpio bank(s) in the wkup domain to prevent spurious wake-up events. And we must restore what we did after idle manually as the gpio bank in wkup domain is not restored otherwise. Let's keep bank->saved_datain register reading separate, that's not related to the 1.101 errata and is used separately on restore. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Reported-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit da38ef3e ] We are currently assuming all GPIOs are non-wakeup capable GPIOs as we not configuring the bank->non_wakeup_gpios like we used to earlier with platform_data. Let's add omap_gpio_is_off_wakeup_capable() to make the handling clearer while considering that later patches may want to configure SoC specific bank->non_wakeup_gpios for the GPIOs in wakeup domain. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Reported-by:
-
Bjorn Andersson authored
[ Upstream commit f95f57e4 ] The regulator definition got their supply names cleaned up during upstreaming, so they no longer match the driver defined names. Update the supply names. Also fill out the missing voltage of SMPS 5. Fixes: 0b363f5b ("arm64: dts: qcom: qcs404: Add PMS405 RPM regulators") Reported-by:
Nicolas Dechesne <nicolas.dechesne@linaro.org> Reviewed-by:
Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 699ca301 ] If __get_free_pages() fails, return -ENOMEM to avoid a NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by:
Steven Price <steven.price@arm.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
-
Paolo Valente authored
[ Upstream commit 778c02a2 ] If a sync bfq_queue has a higher weight than some other queue, and remains temporarily empty while in service, then, to preserve the bandwidth share of the queue, it is necessary to plug I/O dispatching until a new request arrives for the queue. In addition, a timeout needs to be set, to avoid waiting for ever if the process associated with the queue has actually finished its I/O. Even with the above timeout, the device is however not fed with new I/O for a while, if the process has finished its I/O. If this happens often, then throughput drops and latencies grow. For this reason, the timeout is kept rather low: 8 ms is the current default. Unfortunately, such a low value may cause, on the opposite end, a violation of bandwidth guarantees for a process that happens to issue new I/O too late. The higher the system load, the higher the probability that this happens to some process. This is a problem in scenarios where service guarantees matter more than throughput. One important case are weight-raised queues, which need to be granted a very high fraction of the bandwidth. To address this issue, this commit lower-bounds the plugging timeout for weight-raised queues to 20 ms. This simple change provides relevant benefits. For example, on a PLEXTOR PX-256M5S, with which gnome-terminal starts in 0.6 seconds if there is no other I/O in progress, the same applications starts in - 0.8 seconds, instead of 1.2 seconds, if ten files are being read sequentially in parallel - 1 second, instead of 2 seconds, if, in parallel, five files are being read sequentially, and five more files are being written sequentially Tested-by:
Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 1d84353d ] In case ioremap fails, the fix releases resources and returns -ENOMEM to avoid NULL pointer dereferences. Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit ec7f6aad ] When ioremap fails, hga_vram should not be dereferenced. The fix check the failure to avoid NULL pointer dereference. Signed-off-by:
-
Jagan Teki authored
[ Upstream commit a5f50c50 ] GT5663 is capacitive touch controller with customized smart wakeup gestures. Add support for it by adding compatible and supported chip data. The chip data on GT5663 is similar to GT1151, like - config data register has 0x8050 address - config data register max len is 240 - config data checksum has 16-bit Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Giridhar Malavali authored
[ Upstream commit 0257eda0 ] Driver maintains state machine for processing and completing switch commands. This patch resets FCF_ASYNC_{SENT|ACTIVE} flag to indicate if the previous command is active or sent, in order for next GPSC command to advance the state machine. [mkp: commit desc typo] Signed-off-by:
Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Marek Vasut authored
[ Upstream commit 954b4b75 ] The MSI message address in the RC address space can be 64 bit. The R-Car PCIe RC supports such a 64bit MSI message address as well. The code currently uses virt_to_phys(__get_free_pages()) to obtain a reserved page for the MSI message address, and the return value of which can be a 64 bit physical address on 64 bit system. However, the driver only programs PCIEMSIALR register with the bottom 32 bits of the virt_to_phys(__get_free_pages()) return value and does not program the top 32 bits into PCIEMSIAUR, but rather programs the PCIEMSIAUR register with 0x0. This worked fine on older 32 bit R-Car SoCs, however may fail on new 64 bit R-Car SoCs. Since from a PCIe controller perspective, an inbound MSI is a memory write to a special address (in case of this controller, defined by the value in PCIEMSIAUR:PCIEMSIALR), which triggers an interrupt, but never hits the DRAM _and_ because allocation of an MSI by a PCIe card driver obtains the MSI message address by reading PCIEMSIAUR:PCIEMSIALR in rcar_msi_setup_irqs(), incorrectly programmed PCIEMSIAUR cannot cause memory corruption or other issues. There is however the possibility that if virt_to_phys(__get_free_pages()) returned address above the 32bit boundary _and_ PCIEMSIAUR was programmed to 0x0 _and_ if the system had physical RAM at the address matching the value of PCIEMSIALR, a PCIe card driver could allocate a buffer with a physical address matching the value of PCIEMSIALR and a remote write to such a buffer by a PCIe card would trigger a spurious MSI. Fixes: e015f88c ("PCI: rcar: Add support for R-Car H3 to pcie-rcar") Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit f0d14edd ] In case __get_free_pages() fails and returns NULL, fix the return value to -ENOMEM and release resources to avoid dereferencing a NULL pointer. Signed-off-by:
Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by:
-
Kishon Vijay Abraham I authored
[ Upstream commit fd8a44bd ] Platforms which populate msi_host_init() have their own MSI controller logic. Writing to MSI control registers on platforms which do not use Designware's MSI controller logic might have side effects. To be safe, do not write to MSI control registers if the platform uses its own MSI controller logic instead of Designware's MSI one. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by:
-
Peng Li authored
[ Upstream commit 72110b56 ] When set 2 same MAC to different function of one port, IMP will return error as the later one may modify the origin one. This will cause bond fail for 2 VFs of one port. Driver just print warning and return 0 with this patch, so if set same MAC address, it will return 0 but do not really configure HW. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
