- 11 Mar, 2016 40 commits
-
-
Harish Chegondi authored
Add calls to rcu_read_lock()/rcu_read_unlock() as rvt_lookup_qpn callers must hold the rcu_read_lock before calling and keep the lock until the returned qp is no longer in use. Remove lookaside qp and some qp refcount atomics in the sdma send code that is redundant with the s_dma_busy refcount, which will also stall the state processing to the reset state. Change the qpn hash function to hash_32 which is hash function used in rvt_lookup_qpn. qpn_hash function would be eliminated in later patches. Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Harish Chegondi <harish.chegondi@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Dennis Dalessandro authored
Remove some of the unnecessary code from qib_register_ib_device. Reviewed-by:
-
Jubin John authored
srq functionality is now in rdmavt. Remove it from the qib driver. Reviewed-by:
Jubin John <jubin.john@intel.com> Signed-off-by:
-
Ira Weiny authored
alloc_qpn must use GFP and the hardware drivers should use it as well. Reviewed-by:
-
Harish Chegondi authored
rvt_query_port calls into the driver through a call back function query_port_state to populate the rest of ib_port_attr elements. rvt_modify_port calls into the driver if needed through a call back function shut_down_port() Signed-off-by:
-
Dennis Dalessandro authored
Addin query gid support. Rdmavt still relies on the driver to maintain the gid table. Rdmavt simply calls into the driver to retrive the guid for a particular port. Reviewed-by:
-
Dennis Dalessandro authored
IB core uses 1 relative indexing for ports. All of our data structures use 0 based indexing. Add an inline function that we can use whenever we need to validate a legal value and try to convert a port number to a port index at the entrance into rdmavt. Try to follow the policy that when we are talking about a port from IB core point of view we refer to it as a port number. When port is an index into our arrays refer to it as a port index. Reviewed-by:
-
Mitko Haralanov authored
Change verbs memory allocations to the device numa node. This keeps memory close to the device for optimal performance. Reviewed-by:
Dean Luick <dean.luick@intel.com> Reviewed-by:
Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by:
-
Ira Weiny authored
Some hardware drivers requires additional checks on send WRs. Create an optional call back to allow hardware drivers to reject a send WR. Reviewed-by:
-
Jubin John authored
Fill in srq function stubs with code derived from hfi1 and qib. Move necessary functions and data structure members as well. Reviewed-by:
-
Harish Chegondi authored
Rely on rvt_query_qp function defined in rdmavt Reviewed-by:
-
Harish Chegondi authored
Multicast is now supported by rdmavt. Remove the verbs multicast functions and use that. Reviewed-by:
-
Harish Chegondi authored
This patch removes the simple post recv function in favor of using rdmavt. The packet receive processing still lives in the driver though. Reviewed-by:
-
Harish Chegondi authored
This patch removes the post_send and post_one_send from the qib driver. The "posting" of sends will be done by rdmavt which will walk a WQE and queue work. This patch will still provide the capability to schedule that work as well as kick the progress. These are provided to the rdmavt layer. Reviewed-by:
-
Harish Chegondi authored
Use the completion queue functionality provided by rdmavt. Reviewed-by:
-
Dennis Dalessandro authored
Get rid of create and free mad agent from the driver and use rdmavt version. Reviewed-by:
-
Dennis Dalessandro authored
No longer do drivers need to call into the IB core to allocate the verbs device. Use the functionality provided by rdmavt. Reviewed-by:
-
Harish Chegondi authored
Drivers using rdmavt can rely on rvt_query_qp instead of defining their own query_qp functions. Reviewed-by:
-
Dennis Dalessandro authored
Update all files added by rdmavt which do not yet have 2016 as the copyright year. Reviewed-by:
-
Dennis Dalessandro authored
This patch adds mad agent create and free to rdmavt. Reviewed-by:
-
Dennis Dalessandro authored
This patch adds rdmavt device structure allocation in rdamvt. The ib_device alloc is now done in rdmavt instead of the driver. Drivers need to tell rdmavt the number of ports when calling. A side of effect of this patch is fixing a bug with port initialization where the device structure port array was allocated over top of an existing one. Reviewed-by:
-
Ira Weiny authored
Low level drivers need to be able to check incoming attributes as well as be able to adjust their private data on queue pair modification. Add 2 driver callbacks, check_modify_qp and modify_qp, to facilitate this. Signed-off-by:
-
Ira Weiny authored
s_sde should be in the low level driver QP private data. Remove the definition from rvt_qp. Signed-off-by:
-
Dennis Dalessandro authored
There are a number of minor things that should be set by rdmavt rather than by the drivers. Now that rdmavt has solidified in its design we can go ahead and clean up this stuff. Reviewed-by:
-
Dennis Dalessandro authored
This patch adds in the multicast add and remove functions as well as the ancillary infrastructure needed. Reviewed-by:
-
Dennis Dalessandro authored
This patch adds the simple post receive verbs call to rdmavt. The actual interrupt handling and packet processing is still done in the low level driver. Reviewed-by:
-
Dennis Dalessandro authored
This patch adds in support the qp destroy verb call. Reviewed-by:
-
Dennis Dalessandro authored
Add modify qp and supporting functions. Reviewed-by:
-
Dennis Dalessandro authored
This patch adds support of tracing events using the kernels built-in event tracing infrastructure. This can be extended to provide a wide range of trace and debug capabilities which have a negligible impact on performance when enabled. These should be preferred over the use of the rvt_pr* functions. Reviewed-by:
-
Dennis Dalessandro authored
Add in a post_send and post_one_send to rdmavt. The ULP will provide a WQE to rdmavt which will then walk and queue each element. Rdmavt will then queue the work to be done in the driver or kick the driver's progress routine. There needs to be a follow on patch which adds in another lock for the head of the queue so that it can be added to and read from in parallel. This will touch protocol handlers and require other changes in the drivers. This will be done separately. Reviewed-by:
-
Dennis Dalessandro authored
Brings in completion queue functionality. A kthread worker is added to the rvt_dev_info to serve as a worker for completion queues. Reviewed-by:
-
Harish Chegondi authored
Rely on rdmavt functions for creation of qp and qp table. Function to allocate a qpn is still being provided by qib as the algorithm to allocate a qpn in qib is different from that of the algorithm in rdmavt. Reviewed-by:
-
Harish Chegondi authored
Use the definitions of the s_flags and r_flags which are now in rdmavt. Reviewed-by:
-
Harish Chegondi authored
Removed qib_query_device function to use rdmavt rvt_query_device function The device attributes still need to be filled in by the driver. Reviewed-by:
-
Harish Chegondi authored
IB user context alloc and dealloc functions have been added to rdmavt. Delete the QIB user context alloc/dealloc functions and use the ones in rdmavt. Reviewed-by:
-
Harish Chegondi authored
This patch removes the private queue pair structure and the table which holds the queue pair numbers in favor of using what is provided by rdmavt. Reviewed-by:
-
Harish Chegondi authored
Remove qib query pkey function which is no longer needed as this is now being done in rdmavt. The allocation and maintenance of the list still resides in the driver. Reviewed-by:
-
Harish Chegondi authored
Since mmap functionality has been moved into rdmavt, its time for qib to use that. Reviewed-by:
-
Harish Chegondi authored
Additional work is required to create an AH. This patch adds support to set the VL correctly. Reviewed-by:
-
Harish Chegondi authored
Remove several ibport members from qib and use the rdmavt version. rc_acks, rc_qacks, and rc_delayed_comp are defined as per CPU variables in rdmavt. Add support for these rdmavt per CPU variables which were not per cpu variables in qib ibport structure. Reviewed-by:
-
