- 17 Sep, 2014 40 commits
-
-
Steven Rostedt (Red Hat) authored
commit 651e22f2 upstream. When performing a consuming read, the ring buffer swaps out a page from the ring buffer with a empty page and this page that was swapped out becomes the new reader page. The reader page is owned by the reader and since it was swapped out of the ring buffer, writers do not have access to it (there's an exception to that rule, but it's out of scope for this commit). When reading the "trace" file, it is a non consuming read, which means that the data in the ring buffer will not be modified. When the trace file is opened, a ring buffer iterator is allocated and writes to the ring buffer are disabled, such that the iterator will not have issues iterating over the data. Although the ring buffer disabled writes, it does not disable other reads, or even consuming reads. If a consuming read happens, then the iterator is reset and starts reading from the beginning again. My tests would sometimes trigger this bug on my i386 box: WARNING: CPU: 0 PID: 5175 at kernel/trace/trace.c:1527 __trace_find_cmdline+0x66/0xaa() Modules linked in: CPU: 0 PID: 5175 Comm: grep Not tainted 3.16.0-rc3-test+ #8 Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006 00000000 00000000 f09c9e1c c18796b3 c1b5d74c f09c9e4c c103a0e3 c1b5154b f09c9e78 00001437 c1b5d74c 000005f7 c10bd85a c10bd85a c1cac57c f09c9eb0 ed0e0000 f09c9e64 c103a185 00000009 f09c9e5c c1b5154b f09c9e78 f09c9e80^M Call Trace: [<c18796b3>] dump_stack+0x4b/0x75 [<c103a0e3>] warn_slowpath_common+0x7e/0x95 [<c10bd85a>] ? __trace_find_cmdline+0x66/0xaa [<c10bd85a>] ? __trace_find_cmdline+0x66/0xaa [<c103a185>] warn_slowpath_fmt+0x33/0x35 [<c10bd85a>] __trace_find_cmdline+0x66/0xaa^M [<c10bed04>] trace_find_cmdline+0x40/0x64 [<c10c3c16>] trace_print_context+0x27/0xec [<c10c4360>] ? trace_seq_printf+0x37/0x5b [<c10c0b15>] print_trace_line+0x319/0x39b [<c10ba3fb>] ? ring_buffer_read+0x47/0x50 [<c10c13b1>] s_show+0x192/0x1ab [<c10bfd9a>] ? s_next+0x5a/0x7c [<c112e76e>] seq_read+0x267/0x34c [<c1115a25>] vfs_read+0x8c/0xef [<c112e507>] ? seq_lseek+0x154/0x154 [<c1115ba2>] SyS_read+0x54/0x7f [<c188488e>] syscall_call+0x7/0xb ---[ end trace 3f507febd6b4cc83 ]--- >>>> ##### CPU 1 buffer started #### Which was the __trace_find_cmdline() function complaining about the pid in the event record being negative. After adding more test cases, this would trigger more often. Strangely enough, it would never trigger on a single test, but instead would trigger only when running all the tests. I believe that was the case because it required one of the tests to be shutting down via delayed instances while a new test started up. After spending several days debugging this, I found that it was caused by the iterator becoming corrupted. Debugging further, I found out why the iterator became corrupted. It happened with the rb_iter_reset(). As consuming reads may not read the full reader page, and only part of it, there's a "read" field to know where the last read took place. The iterator, must also start at the read position. In the rb_iter_reset() code, if the reader page was disconnected from the ring buffer, the iterator would start at the head page within the ring buffer (where writes still happen). But the mistake there was that it still used the "read" field to start the iterator on the head page, where it should always start at zero because readers never read from within the ring buffer where writes occur. I originally wrote a patch to have it set the iter->head to 0 instead of iter->head_page->read, but then I questioned why it wasn't always setting the iter to point to the reader page, as the reader page is still valid. The list_empty(reader_page->list) just means that it was successful in swapping out. But the reader_page may still have data. There was a bug report a long time ago that was not reproducible that had something about trace_pipe (consuming read) not matching trace (iterator read). This may explain why that happened. Anyway, the correct answer to this bug is to always use the reader page an not reset the iterator to inside the writable ring buffer. Fixes: d769041f "ring_buffer: implement new locking" Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Vrabel authored
commit c12784c3 upstream. When using the FIFO-based event channel ABI, if the control block or the local HEADs are not reset after resuming the guest may see stale HEAD values and will fail to traverse the FIFO correctly. This may prevent one or more VCPUs from receiving any events following a resume. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Hans de Goede authored
commit 84c34858 upstream. Link: https://bugs.freedesktop.org/show_bug.cgi?id=81515Reported-and-tested-by:
Hohahiu <rakothedin@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Hans de Goede authored
commit 5f24079b upstream. Some laptops have a working acpi_video backlight control, and using native backlight on these causes a regression where backlight control does not work when userspace is not handling brightness key events. Disable native_backlight on these to fix this. Link: https://bugzilla.kernel.org/show_bug.cgi?id=81691Reported-and-tested-by:
Andre Müller <andre.muller@web.de> Signed-off-by:
-
Hans de Goede authored
commit 25294e9f upstream. Commit 751109aa ("ACPI / video: Change the default for video.use_native_backlight to 1") has changed the default for use_native_backlight from 0 to 1, but instead of changing use_native_backlight_dmi to true, and leaving use_native_backlight_param at -1, it has changed use_native_backlight_param to 1. This causes acpi_video_use_native_backlight() to always think that a value was specified through the param, making it impossible to add a dmi based quirk to force 0 now that the default is 1. This fixes this by restoring the use_native_backlight_param default to -1, and instead setting the use_native_backlight_dmi default to true. Fixes: 751109aa (ACPI / video: Change the default for video.use_native_backlight to 1) Signed-off-by:
-
Jiri Kosina authored
commit 6726655d upstream. There is a following AB-BA dependency between cpu_hotplug.lock and cpuidle_lock: 1) cpu_hotplug.lock -> cpuidle_lock enable_nonboot_cpus() _cpu_up() cpu_hotplug_begin() LOCK(cpu_hotplug.lock) cpu_notify() ... acpi_processor_hotplug() cpuidle_pause_and_lock() LOCK(cpuidle_lock) 2) cpuidle_lock -> cpu_hotplug.lock acpi_os_execute_deferred() workqueue ... acpi_processor_cst_has_changed() cpuidle_pause_and_lock() LOCK(cpuidle_lock) get_online_cpus() LOCK(cpu_hotplug.lock) Fix this by reversing the order acpi_processor_cst_has_changed() does thigs -- let it first execute the protection against CPU hotplug by calling get_online_cpus() and obtain the cpuidle lock only after that (and perform the symmentric change when allowing CPUs hotplug again and dropping cpuidle lock). Spotted by lockdep. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Yasuaki Ishimatsu authored
commit a383b68d upstream. The _SUN device indentification object is not guaranteed to return the same value every time it is executed, so we should not cache its return value, but rather execute it every time as needed. If it is cached, an incorrect stale value may be used in some situations. This issue was exposed by commit 202317a5 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace). Fix it by avoiding to cache the return value of _SUN. Fixes: 202317a5 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace) Signed-off-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> [ rjw: Changelog ] Signed-off-by:
-
Lv Zheng authored
commit 558e4736 upstream. There is platform refusing to respond QR_EC when SCI_EVT isn't set which is Acer Aspire V5-573G. By disallowing QR_EC to be issued before the previous one has been completed we are able to reduce the possibilities to trigger issues on such platforms. Note that this fix can only reduce the occurrence rate of this issue, but this issue may still occur when such a platform doesn't clear SCI_EVT before or immediately after completing the previous QR_EC transaction. This patch cannot fix the CLEAR_ON_RESUME quirk which also relies on the assumption that the platforms are able to respond even when SCI_EVT isn't set. But this patch is still useful as it can help to reduce the number of scheduled QR_EC work items. Link: https://bugzilla.kernel.org/show_bug.cgi?id=82611Reported-and-tested-by:
Alexander Mezin <mezin.alexander@gmail.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
-
Lv Zheng authored
commit 3afcf2ec upstream. There is a platform refusing to respond QR_EC when SCI_EVT isn't set (Acer Aspire V5-573G). Currently, we rely on the behaviour that the EC firmware can respond something (for example, 0x00 to indicate "no outstanding events") to QR_EC even when SCI_EVT is not set, but the reporter has complained about AC/battery pluging/unpluging and video brightness change delay on that platform. This is because the work item that has issued QR_EC has to wait until timeout in this case, and the _Qxx method evaluation work item queued after QR_EC one is delayed. It sounds reasonable to fix this issue by: 1. Implementing SCI_EVT sanity check before issuing QR_EC in the EC driver's main state machine. 2. Moving QR_EC issuing out of the work queue used by _Qxx evaluation to a seperate IRQ handling thread. This patch fixes this issue using solution 1. By disallowing QR_EC to be issued when SCI_EVT isn't set, we are able to handle such platform in the EC driver's main state machine. This patch enhances the state machine in this way to survive with such malfunctioning EC firmware. Note that this patch can also fix CLEAR_ON_RESUME quirk which also relies on the assumption that the platforms are able to respond even when SCI_EVT isn't set. Fixes: c0d65341 ACPI / EC: Fix race condition in ec_transaction_completed() Link: https://bugzilla.kernel.org/show_bug.cgi?id=82611Reported-and-tested-by:
-
Rafael J. Wysocki authored
commit fc2e0a83 upstream. We generally don't allow ACPI drivers to bind to ACPI device objects that companion "physical" device objects are created for to avoid situations in which two different drivers may attempt to handle one device at the same time. Recent ACPI device enumeration rework extended that approach to ACPI PNP devices by starting to use a scan handler for enumerating them. However, we previously allowed ACPI drivers to bind to ACPI device objects with existing PNP device companions and changing that led to functional regressions on some systems. For this reason, add a special check for PNP devices in acpi_device_probe() so that ACPI drivers can bind to ACPI device objects having existing PNP device companions as before. Fixes: eec15edb (ACPI / PNP: use device ID list for PNPACPI device enumeration) Link: https://bugzilla.kernel.org/show_bug.cgi?id=81511 Link: https://bugzilla.kernel.org/show_bug.cgi?id=81971Reported-by:
Gabriele Mazzotta <gabriele.mzt@gmail.com> Reported-by:
Dirk Griesbach <spamthis@freenet.de> Signed-off-by:
-
Lan Tianyu authored
commit 236105db upstream. Currently, notify callbacks for fixed button events are run from interrupt context. That is not necessary and after commit 0bf6368e (ACPI / button: Add ACPI Button event via netlink routine) it causes netlink routines to be called from interrupt context which is not correct. Also, that is different from non-fixed device events (including non-fixed button events) whose notify callbacks are all executed from process context. For the above reasons, make fixed button device notify callbacks run in process context which will avoid the deadlock when using netlink to report button events to user space. Fixes: 0bf6368e (ACPI / button: Add ACPI Button event via netlink routine) Link: https://lkml.org/lkml/2014/8/21/606Reported-by:
Benjamin Block <bebl@mageta.org> Reported-by:
Knut Petersen <Knut_Petersen@t-online.de> Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> [rjw: Function names, subject and changelog.] Signed-off-by:
-
Alan Cox authored
commit aca26364 upstream. The SPI host controller is the same as used in Baytrail, only the ACPI ID is different so add this new ID to the list. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Tang Chen authored
commit dee15926 upstream. When ACPI_HOTPLUG_MEMORY is not configured, memory_device_handler.attach is not set. In acpi_scan_attach_handler(), the acpi_device->handler will not be initialized. In acpi_scan_hot_remove(), it doesn't check if acpi_device->handler is NULL. If we do memory hot-remove without ACPI_HOTPLUG_MEMORY configured, the kernel will panic. BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 IP: [<ffffffff813e318f>] acpi_device_hotplug+0x1d7/0x4c4 PGD 0 Oops: 0000 [#1] SMP Modules linked in: sd_mod(E) sr_mod(E) cdrom(E) crc_t10dif(E) crct10dif_common(E) ata_piix(E) libata(E) CPU: 0 PID: 41 Comm: kworker/u2:1 Tainted: G E 3.16.0-rc7--3.16-rc7-tangchen+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Workqueue: kacpi_hotplug acpi_hotplug_work_fn task: ffff8800182436c0 ti: ffff880018254000 task.ti: ffff880018254000 RIP: 0010:[<ffffffff813e318f>] [<ffffffff813e318f>] acpi_device_hotplug+0x1d7/0x4c4 RSP: 0000:ffff880018257da8 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff88001cd8d800 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88001e40e6f8 RDI: 0000000000000246 RBP: ffff880018257df0 R08: 0000000000000096 R09: 00000000000011a0 R10: 63735f6970636120 R11: 725f746f685f6e61 R12: 0000000000000003 R13: ffff88001cc1c400 R14: ffff88001e062028 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff88001e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000088 CR3: 000000001a9a2000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 Stack: 00000000523cab58 ffff88001cd8d9f8 ffff88001852d480 00000000523cab58 ffff88001852d480 ffff880018221e40 ffff88001cc1c400 ffff88001cce2d00 0000000000000040 ffff880018257e08 ffffffff813dc31d ffff88001852d480 Call Trace: [<ffffffff813dc31d>] acpi_hotplug_work_fn+0x1e/0x29 [<ffffffff8108eefb>] process_one_work+0x17b/0x460 [<ffffffff8108f69d>] worker_thread+0x11d/0x5b0 [<ffffffff8108f580>] ? rescuer_thread+0x3a0/0x3a0 [<ffffffff81096811>] kthread+0xe1/0x100 [<ffffffff81096730>] ? kthread_create_on_node+0x1a0/0x1a0 [<ffffffff816cc6bc>] ret_from_fork+0x7c/0xb0 [<ffffffff81096730>] ? kthread_create_on_node+0x1a0/0x1a0 This patch fixes this problem by checking if acpi_device->handler is NULL in acpi_scan_hot_remove(). Fixes: d22ddcbc (ACPI / hotplug: Add demand_offline hotplug profile flag) Signed-off-by:
Tang Chen <tangchen@cn.fujitsu.com> [rjw: Subject] Signed-off-by:
-
David E. Box authored
commit e23d9b82 upstream. Fixes a bug exposed by an ACPICA unit test around the acpi_attach_data()/acpi_detach_data() APIs where the failure to null terminate a detached object led to the creation of a circular linked list (and infinite looping) when the object is reattached. Reported in acpica bugzilla #1063 Link: https://bugs.acpica.org/show_bug.cgi?id=1063Signed-off-by:
David E. Box <david.e.box@linux.intel.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
-
David E. Box authored
commit 8aa5e56e upstream. Adds return status check on copy routines to delete the allocated destination object if either copy fails. Reported by Colin Ian King on bugs.acpica.org, Bug 1087. The last applicable commit: Commit: 3371c19c Subject: ACPICA: Remove ACPI_GET_OBJECT_TYPE macro Link: https://bugs.acpica.org/show_bug.cgi?id=1087Reported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Sebastian Reichel authored
commit 3c018504 upstream. Move sysfs_notify and i2c_transfer calls from bq2415x_notifier_call to bq2415x_timer_work to avoid sleeping in atomic context. This fixes the following bug: [ 7.667449] Workqueue: events power_supply_changed_work [ 7.673034] [<c0015c28>] (unwind_backtrace+0x0/0xe0) from [<c0011e1c>] (show_stack+0x10/0x14) [ 7.682098] [<c0011e1c>] (show_stack+0x10/0x14) from [<c052cdd0>] (dump_stack+0x78/0xac) [ 7.690704] [<c052cdd0>] (dump_stack+0x78/0xac) from [<c052a044>] (__schedule_bug+0x48/0x60) [ 7.699645] [<c052a044>] (__schedule_bug+0x48/0x60) from [<c053071c>] (__schedule+0x74/0x638) [ 7.708618] [<c053071c>] (__schedule+0x74/0x638) from [<c05301fc>] (schedule_timeout+0x1dc/0x24c) [ 7.718017] [<c05301fc>] (schedule_timeout+0x1dc/0x24c) from [<c05316ec>] (wait_for_common+0x138/0x17c) [ 7.727966] [<c05316ec>] (wait_for_common+0x138/0x17c) from [<c0362a70>] (omap_i2c_xfer+0x340/0x4a0) [ 7.737640] [<c0362a70>] (omap_i2c_xfer+0x340/0x4a0) from [<c035d928>] (__i2c_transfer+0x40/0x74) [ 7.747039] [<c035d928>] (__i2c_transfer+0x40/0x74) from [<c035e22c>] (i2c_transfer+0x6c/0x90) [ 7.756195] [<c035e22c>] (i2c_transfer+0x6c/0x90) from [<c037ad24>] (bq2415x_i2c_write+0x48/0x78) [ 7.765563] [<c037ad24>] (bq2415x_i2c_write+0x48/0x78) from [<c037ae60>] (bq2415x_set_weak_battery_voltage+0x4c/0x50) [ 7.776824] [<c037ae60>] (bq2415x_set_weak_battery_voltage+0x4c/0x50) from [<c037bce8>] (bq2415x_set_mode+0xdc/0x14c) [ 7.788085] [<c037bce8>] (bq2415x_set_mode+0xdc/0x14c) from [<c037bfb8>] (bq2415x_notifier_call+0xa8/0xb4) [ 7.798309] [<c037bfb8>] (bq2415x_notifier_call+0xa8/0xb4) from [<c005f228>] (notifier_call_chain+0x38/0x68) [ 7.808715] [<c005f228>] (notifier_call_chain+0x38/0x68) from [<c005f284>] (__atomic_notifier_call_chain+0x2c/0x3c) [ 7.819732] [<c005f284>] (__atomic_notifier_call_chain+0x2c/0x3c) from [<c005f2a8>] (atomic_notifier_call_chain+0x14/0x18) [ 7.831420] [<c005f2a8>] (atomic_notifier_call_chain+0x14/0x18) from [<c0378078>] (power_supply_changed_work+0x6c/0xb8) [ 7.842864] [<c0378078>] (power_supply_changed_work+0x6c/0xb8) from [<c00556c0>] (process_one_work+0x248/0x440) [ 7.853546] [<c00556c0>] (process_one_work+0x248/0x440) from [<c0055d6c>] (worker_thread+0x208/0x350) [ 7.863372] [<c0055d6c>] (worker_thread+0x208/0x350) from [<c005b0ac>] (kthread+0xc8/0xdc) [ 7.872131] [<c005b0ac>] (kthread+0xc8/0xdc) from [<c000e138>] (ret_from_fork+0x14/0x3c) Fixes: 32260308 ("bq2415x_charger: Use power_supply notifier for automode") Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Ben Hutchings authored
commit 03a6c3ff upstream. bfa_swap_words() shifts its argument (assumed to be 64-bit) by 32 bits each way. In two places the argument type is dma_addr_t, which may be 32-bit, in which case the effect of the bit shift is undefined: drivers/scsi/bfa/bfa_fcpim.c: In function 'bfa_ioim_send_ioreq': drivers/scsi/bfa/bfa_fcpim.c:2497:4: warning: left shift count >= width of type [enabled by default] addr = bfa_sgaddr_le(sg_dma_address(sg)); ^ drivers/scsi/bfa/bfa_fcpim.c:2497:4: warning: right shift count >= width of type [enabled by default] drivers/scsi/bfa/bfa_fcpim.c:2509:4: warning: left shift count >= width of type [enabled by default] addr = bfa_sgaddr_le(sg_dma_address(sg)); ^ drivers/scsi/bfa/bfa_fcpim.c:2509:4: warning: right shift count >= width of type [enabled by default] Avoid this by adding casts to u64 in bfa_swap_words(). Compile-tested only. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Acked-by:
Anil Gurumurthy <anil.gurumurthy@qlogic.com> Fixes: f16a1750 ('[SCSI] bfa: remove all OS wrappers') Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Peter Ujfalusi authored
commit fdaf42c0 upstream. The platform_name should be omap-mcasp3 for the 2nd link which is used for voice connection. Reported-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Mark Brown <broonie+linaro@kernel.org> Signed-off-by:
-
Jarkko Nikula authored
commit f4821e8e upstream. Debugging showed Realtek RT5642 doesn't support autoincrementing writes so driver should set the use_single_rw flag for regmap. Signed-off-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
-
Andreas Färber authored
commit d1555c40 upstream. The specification requires compatible = "adi,axi-spdif-1.00.a" but driver and example and file name indicate "adi,axi-spdif-tx-1.00.a". Change the specification to match the implementation. Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Reviewed-by:
Michal Simek <michal.simek@xilinx.com> Fixes: d7b528ef ("dt: Add bindings documentation for the ADI AXI-SPDIF audio controller") Signed-off-by:
Andreas Färber <afaerber@suse.de> Signed-off-by:
-
Daniel Mack authored
commit 9301503a upstream. This mode is unsupported, as the DMA controller can't do zero-padding of samples. Signed-off-by:
Daniel Mack <zonque@gmail.com> Reported-by:
Johannes Stezenbach <js@sig21.net> Signed-off-by:
-
Dan Carpenter authored
commit 45487289 upstream. There is a small memory leak if probe() fails. Fixes: 2023c90c ('ASoC: pxa: pxa-ssp: add DT bindings') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jie Yang authored
commit 8e897618 upstream. This change removes unsupported formats from System, Capture and Loopback FE DAIs. Also it fixes S24_LE support on all DAIs. While at this fix 24 bit flag for BYT as well. Signed-off-by:
Jie Yang <yang.jie@intel.com> Signed-off-by:
-
Peter Ujfalusi authored
commit a72d2abb upstream. We need to return the error codes from aic31xx_device_init() and return from the i2c_probe with the error code. We will have kernel panic (NULL pointer dereference) in regulator_register_notifier() in case the devm_regulator_bulk_get() fails (with -EPROBE_DEFER for example). Signed-off-by:
-
Jarkko Nikula authored
commit 4adeb0cc upstream. max98090.c doesn't free the threaded interrupt it requests. This causes an oops when doing "cat /proc/interrupts" after snd-soc-max98090.ko is unloaded. Fix this by requesting the interrupt by using devm_request_threaded_irq(). Signed-off-by:
-
Daniel Mack authored
commit 3ad80b82 upstream. Fix a long standing bug in the read register routing of adau1701. The bytes arrive in the buffer in big-endian, so the result has to be shifted before and-ing the bytes in the loop. Signed-off-by:
-
Sylwester Nawrocki authored
commit d3d4e524 upstream. We should save/restore relevant I2S registers regardless of the dai->active flag, otherwise some settings are being lost after system suspend/resume cycle. E.g. I2S slave mode set only during dai initialization is not preserved and the device ends up in master mode after system resume. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Scott Jiang authored
commit 30443408 upstream. The third parameter for snd_pcm_format_set_silence needs the number of samples instead of sample bytes. Signed-off-by:
Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by:
-
Praveen Diwakar authored
commit 0a37c6ef upstream. Since MODULE_LICENSE is missing the module load fails, so add this for module. Signed-off-by:
Praveen Diwakar <praveen.diwakar@intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Reviewed-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
-
Qiao Zhou authored
commit 7ed9de76 upstream. we need to release dapm widget list after dpcm_path_get in soc_dpcm_runtime_update. otherwise, there will be potential memory leak. add dpcm_path_put to fix it. Signed-off-by:
Qiao Zhou <zhouqiao@marvell.com> Signed-off-by:
-
Charles Keepax authored
commit b3831417 upstream. wm1811_micd_stop takes the accdet_lock mutex, and is called from two places, one of which is already holding the accdet_lock. This obviously causes a lock up. This patch fixes this issue by removing the lock from wm1811_micd_stop and ensuring that it is always locked externally. Signed-off-by:
-
Markos Chandras authored
commit 6521d9a4 upstream. The CPS code is doing several memory loads when configuring the VPEs from secondary cores, so the segmentation control registers must be initialized in time otherwise the kernel will crash with strange TLB exceptions. Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Patchwork: http://patchwork.linux-mips.org/patch/7424/Signed-off-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
Markos Chandras authored
commit ca4d24f7 upstream. Rename 'eva_entry' to 'platform_eva_init' as required by the new 'eva_init' macro in the eva.h header. Since this macro is now used in a platform dependent way, it must not depend on its caller so move the t1 register initialization inside this macro. Also set the .reorder assembler option in case the caller may have previously set .noreorder. This may allow a few assembler optimizations. Finally include missing headers and document the register usage for this macro. Reviewed-by:
-
Markos Chandras authored
commit f85b71ce upstream. Generic code may need to perform certain operations when EVA is enabled, for example, configure the segmentation registers during boot. In order to avoid using more CONFIG_EVA ifdefs in the arch code, such functions will be added in this header instead. Initially this header contains a macro which will be used by generic code later on during VPEs configuration on secondary cores. All it does is to call the platform specific EVA init code in case EVA is enabled. Reviewed-by:
-
Aaro Koskinen authored
commit 60830868 upstream. get_system_type() is not thread-safe on OCTEON. It uses static data, also more dangerous issue is that it's calling cvmx_fuse_read_byte() every time without any synchronization. Currently it's possible to get processes stuck looping forever in kernel simply by launching multiple readers of /proc/cpuinfo: (while true; do cat /proc/cpuinfo > /dev/null; done) & (while true; do cat /proc/cpuinfo > /dev/null; done) & ... Fix by initializing the system type string only once during the early boot. Signed-off-by:
Aaro Koskinen <aaro.koskinen@nsn.com> Reviewed-by:
-
Markos Chandras authored
commit 64615682 upstream. Using kstrtol to parse the "{e,}memsize" variables was wrong because this parses signed long numbers. In case of '{e,}memsize' >= 2G, the top bit is set, resulting to -ERANGE errors and possibly random system memory boundaries. We fix this by replacing "kstrtol" with "kstrtoul". We also improve the code to check the kstrtoul return value and print a warning if an error was returned. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Markos Chandras authored
commit 52456899 upstream. Commit 4c21b8fd (MIPS: seccomp: Handle indirect system calls (o32)) added indirect syscall detection for O32 processes running on MIPS64 but it did not work as expected. The reason is the the scall64-o32 implementation differs compared to scall32-o32. In the former, the v0 (syscall number) register contains the absolute syscall number (4000 + X) whereas in the latter it contains the relative syscall number (X). Fix the code to avoid doing an extra addition, and load the v0 register directly to the first argument for syscall_trace_enter. Moreover, set the .reorder assembler option in order to have better control on this part of the assembly code. Signed-off-by:
-
Markos Chandras authored
commit 40381529 upstream. On MIPS64, O32 processes set both TIF_32BIT_ADDR and TIF_32BIT_REGS so the previous condition treated O32 applications as N32 when evaluating seccomp filters. Fix the condition to check both TIF_32BIT_{REGS, ADDR} for the N32 AUDIT flag. Signed-off-by:
-
Alex Smith authored
commit bcec7c8d upstream. Get rid of the WANT_COMPAT_REG_H test and instead define both the 32- and 64-bit register offset definitions at the same time with MIPS{32,64}_ prefixes, then define the existing EF_* names to the correct definitions for the kernel's bitness. This patch is a prerequisite of the following bug fix patch. Signed-off-by:
Alex Smith <alex@alex-smith.me.uk> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7451/Signed-off-by:
-
Huacai Chen authored
commit 2e5767a2 upstream. In do_ade(), is_fpu_owner() isn't preempt-safe. For example, when an unaligned ldc1 is executed, do_cpu() is called and then FPU will be enabled (and TIF_USEDFPU will be set for the current process). Then, do_ade() is called because the access is unaligned. If the current process is preempted at this time, TIF_USEDFPU will be cleard. So when the process is scheduled again, BUG_ON(!is_fpu_owner()) is triggered. This small program can trigger this BUG in a preemptible kernel: int main (int argc, char *argv[]) { double u64[2]; while (1) { asm volatile ( ".set push \n\t" ".set noreorder \n\t" "ldc1 $f3, 4(%0) \n\t" ".set pop \n\t" ::"r"(u64): ); } return 0; } V2: Remove the BUG_ON() unconditionally due to Paul's suggestion. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
Jie Chen <chenj@lemote.com> Signed-off-by:
Rui Wang <wangr@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Signed-off-by:
-
