Merge tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers

Amlogic: driver updates for v5.1
- clock measure: add support for G12a SoC family
- misc. fixes

* tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  soc: amlogic: clk-measure: add axg and g12a support
  dt-bindings: amlogic: add new compatible devices to clk_measure
  soc: amlogic: canvas: Fix meson_canvas_get when probe failed
  soc: amlogic: add missing of_node_put()
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-drivers-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers

i.MX drivers update for 5.1:
 - Do not get GPCv2 driver depend on SOC_IMX8MQ since the driver is
   going to be used on more SoCs than just i.MX8MQ.
 - Add power domain information into SCU bindings document.
 - Add support of start/stop a CPU into imx firmware driver.
 - Support multiple address ranges per child node for imx-weim bus
   driver.

* tag 'imx-drivers-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  firmware: imx: Add support to start/stop a CPU
  soc: imx: Break dependency on SOC_IMX8MQ for GPCv2
  firmware: imx: scu-pd: add fallback compatible string support
  dt-bindings: fsl: scu: add imx8qm scu power domain support
  dt-bindings: fsl: scu: add fallback compatible string for power domain
  bus: imx-weim: guard against timing configuration conflicts
  bus: imx-weim: support multiple address ranges per child node
  dt-bindings: bus: imx-weim: document multiple address ranges per child node
  soc: imx: gpcv2: handle reset clocks
  soc: imx: gpcv2: handle additional power-down bits in handshake register
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arm64: zynqmp: SoC changes for v5.1

- Extend firmware interface with reset, nvmem,
  power management and power domain support

- Add reset, nvmem driver, power management and
  power domain drivers
-

* tag 'zynqmp-soc-for-v5.1' of https://github.com/Xilinx/linux-xlnx:
  drivers: soc: xilinx: Add ZynqMP power domain driver
  firmware: xilinx: Add APIs to control node status/power
  dt-bindings: power: Add ZynqMP power domain bindings
  drivers: soc: xilinx: Add ZynqMP PM driver
  firmware: xilinx: Implement ZynqMP power management APIs
  dt-bindings: soc: Add ZynqMP PM bindings
  nvmem: zynqmp: Added zynqmp nvmem firmware driver
  dt-bindings: nvmem: Add bindings for ZynqMP nvmem driver
  firmware: xilinx: Add zynqmp_pm_get_chipid() API
  reset: reset-zynqmp: Adding support for Xilinx zynqmp reset controller.
  dt-bindings: reset: Add bindings for ZynqMP reset driver
  firmware: xilinx: Add reset API's
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The zynqmp-genpd driver communicates the usage requirements
for logical power domains / devices to the platform FW.
FW is responsible for choosing appropriate power states,
taking Linux' usage information into account.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add Xilinx ZynqMP firmware APIs to control node status
and power. These APIs allows turning on/off power domain
and setting capabilities of devices present in power domain.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add documentation to describe ZynqMP power domain bindings.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add ZynqMP PM driver. PM driver provides power management
support for ZynqMP.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add Xilinx ZynqMP firmware APIs to set suspend mode
and inform firmware that master has initialized its
own power management.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add documentation to describe Xilinx ZynqMP power management
bindings.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This is done via RPC call to SCU.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add support for the axg and g12a SoC family in amlogic clk measure
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[khilman: squashed some fixups from Martin]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Add the axg and g12a SoC family compatible to the clock measure bindings
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

When probe fails, a platforn_device is still associated to the node,
but dev_get_drvdata() returns NULL.

Handle this case by returning a consistent error.

Fixes: d4983983 ("soc: amlogic: add meson-canvas driver")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com>
[khilman: fixed minor typo in comment ]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented here after the last
usage.
Signed-off-by: Wen Yang <yellowriver2010@hotmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Fixes: d4983983 ("soc: amlogic: add meson-canvas driver")
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

This patch adds zynqmp nvmem firmware driver to access the
SoC revision information from the hardware register.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add documentation to describe Xilinx ZynqMP nvmem driver
bindings.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch adds a new API to provide access to the
hardware related data like soc revision, IDCODE... etc.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Merge tag 'soc-fsl-next-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers

NXP/FSL SoC driver updates for v5.1

DPIO driver
- Clean up the remove path in the dpio driver so that successive
  bind/unbind commands behave properly
- Add the ability to automatically create a device link between a
  consumer device on the fsl-mc bus and a supplier one
- Add prefetch to dpio dequeue to improve performance
- Update the type of dpio APIs to align with buffer pool id register
  field

guts driver
- Prevent allocation failure by reuse the machine type data from device
  tree directly

* tag 'soc-fsl-next-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: guts: reuse machine name from device tree
  soc: fsl: dpio: Change bpid type to u16
  soc: fsl: dpio: Add prefetch instruction
  bus: fsl-mc: automatically add a device_link on fsl_mc_[portal,object]_allocate
  soc: fsl: dpio: add a device_link at dpaa2_io_service_register
  soc: fsl: dpio: store a backpointer to the device backing the dpaa2_io
  soc: fsl: dpio: keep a per dpio device MC portal
  soc: fsl: dpio: perform DPIO Reset on Probe
  soc: fsl: dpio: use a cpumask to identify which cpus are unused
  soc: fsl: dpio: cleanup the cpu array on dpaa2_io_down
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add a reset controller driver for Xilinx Zynq UltraScale+ MPSoC.
The zynqmp reset-controller has the ability to reset lines
connected to different blocks and peripheral in the Soc.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add documentation to describe Xilinx ZynqMP reset driver
bindings.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This Patch Adds reset API's to support release, assert
and status functionalities by using firmware interface.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for x86:

   - Fix the swapped outb() parameters in the KASLR code

   - Fix the PKEY handling at fork which missed to preserve the pkey
     state for the child. Comes with a test case to validate that.

   - Fix the entry stack handling for XEN PV to respect that XEN PV
     systems enter the function already on the current thread stack and
     not on the trampoline.

   - Fix kexec load failure caused by using a stale value when the
     kexec_buf structure is reused for subsequent allocations.

   - Fix a bogus sizeof() in the memory encryption code

   - Enforce PCI dependency for the Intel Low Power Subsystem

   - Enforce PCI_LOCKLESS_CONFIG when PCI is enabled"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/Kconfig: Select PCI_LOCKLESS_CONFIG if PCI is enabled
  x86/entry/64/compat: Fix stack switching for XEN PV
  x86/kexec: Fix a kexec_file_load() failure
  x86/mm/mem_encrypt: Fix erroneous sizeof()
  x86/selftests/pkeys: Fork() to check for state being preserved
  x86/pkeys: Properly copy pkey state at fork()
  x86/kaslr: Fix incorrect i8254 outb() parameters
  x86/intel/lpss: Make PCI dependency explicit

Pull x86 timer fixes from Thomas Gleixner:
 "Two commits which were missed to be sent during the merge window.

   - The TSC calibration fix turns out to be more urgent as recent
     Skylake-X systems seem to have massive trouble with calibration
     disturbance. This should go back into stable for that reason and it
     the risk of breakage is rather low.

   - Drop an unused define"

* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/hpet: Remove unused FSEC_PER_NSEC define
  x86/tsc: Make calibration refinement more robust

Pull timer fix from Thomas Glexiner:
 "A single regression fix to address the unintended breakage of posix
  cpu timers.

  This is caused by a new sanity check in the common code, which fails
  for posix cpu timers under certain conditions because the posix cpu
  timer code never updates the variable which is checked"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Unbreak timer rearming

Pull locking fixes from Thomas Gleixner:
 "A small series of fixes which all address possible missed wakeups:

   - Document and fix the wakeup ordering of wake_q

   - Add the missing barrier in rcuwait_wake_up(), which was documented
     in the comment but missing in the code

   - Fix the possible missed wakeups in the rwsem and futex code"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwsem: Fix (possible) missed wakeup
  futex: Fix (possible) missed wakeup
  sched/wake_q: Fix wakeup ordering for wake_q
  sched/wake_q: Document wake_q_add()
  sched/wait: Fix rcuwait_wake_up() ordering

Pull irq fixes from Thomas Gleixner:
 "A small set of fixes for the interrupt subsystem:

   - Fix a double increment in the irq descriptor allocator which
     resulted in a sanity check only being done for every second
     affinity mask

   - Add a missing device tree translation in the stm32-exti driver.
     Without that the interrupt association is completely wrong.

   - Initialize the mutex in the GIC-V3 MBI driver

   - Fix the alignment for aliasing devices in the GIC-V3-ITS driver so
     multi MSI allocations work correctly

   - Ensure that the initial affinity of a interrupt is not empty at
     startup time.

   - Drop bogus include in the madera irq chip driver

   - Fix KernelDoc regression"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size
  genirq/irqdesc: Fix double increment in alloc_descs()
  genirq: Fix the kerneldoc comment for struct irq_affinity_desc
  irqchip/madera: Drop GPIO includes
  irqchip/gic-v3-mbi: Fix uninitialized mbi_lock
  irqchip/stm32-exti: Add domain translate function
  genirq: Make sure the initial affinity is not empty

Pull EDAC fix from Borislav Petkov:
 "Fix persistent register offsets of altera_edac, from Thor Thayer"

* tag 'edac_fix_for_5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, altera: Fix S10 persistent register offset

Pull block revert from Jens Axboe:
 "Silly error snuck into a patch from the last series, let's do a revert
  to avoid a potential use-after-free"

* tag 'for-linus-20190127' of git://git.kernel.dk/linux-block:
  Revert "block: cover another queue enter recursion via BIO_QUEUE_ENTERED"

Pull KVM fixes from Paolo Bonzini:
 "Quite a few fixes for x86: nested virtualization save/restore, AMD
  nested virtualization and virtual APIC, 32-bit fixes, an important fix
  to restore operation on older processors, and a bunch of hyper-v
  bugfixes. Several are marked stable.

  There are also fixes for GCC warnings and for a GCC/objtool interaction"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Mark expected switch fall-throughs
  KVM: x86: fix TRACE_INCLUDE_PATH and remove -I. header search paths
  KVM: selftests: check returned evmcs version range
  x86/kvm/hyper-v: nested_enable_evmcs() sets vmcs_version incorrectly
  KVM: VMX: Move vmx_vcpu_run()'s VM-Enter asm blob to a helper function
  kvm: selftests: Fix region overlap check in kvm_util
  kvm: vmx: fix some -Wmissing-prototypes warnings
  KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting to L1
  svm: Fix AVIC incomplete IPI emulation
  svm: Add warning message for AVIC IPI invalid target
  KVM: x86: WARN_ONCE if sending a PV IPI returns a fatal error
  KVM: x86: Fix PV IPIs for 32-bit KVM host
  x86/kvm/hyper-v: recommend using eVMCS only when it is enabled
  x86/kvm/hyper-v: don't recommend doing reset via synthetic MSR
  kvm: x86/vmx: Use kzalloc for cached_vmcs12
  KVM: VMX: Use the correct field var when clearing VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL
  KVM: x86: Fix single-step debugging
  x86/kvm/hyper-v: don't announce GUEST IDLE MSR support

Pull dma-mapping fix from Christoph Hellwig:
 "Fix a xen-swiotlb regression on arm64"

* tag 'dma-mapping-5.0-2' of git://git.infradead.org/users/hch/dma-mapping:
  arm64/xen: fix xen-swiotlb cache flushing

Pull libnvdimm fixes from Dan Williams:
 "A fix for namespace label support for non-Intel NVDIMMs that implement
  the ACPI standard label method.

  This has apparently never worked and could wait for v5.1. However it
  has enough visibility with hardware vendors [1] and distro bug
  trackers [2], and low enough risk that I decided it should go in for
  -rc4. The other fixups target the new, for v5.0, nvdimm security
  functionality. The larger init path fixup closes a memory leak and a
  potential userspace lockup due to missed notifications.

    [1] https://github.com/pmem/ndctl/issues/78
    [2] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1811785

  These have all soaked in -next for a week with no reported issues.

  Summary:

   - Fix support for NVDIMMs that implement the ACPI standard label
     methods.

   - Fix error handling for security overwrite (memory leak / userspace
     hang condition), and another one-line security cleanup"

* tag 'libnvdimm-fixes-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  acpi/nfit: Fix command-supported detection
  acpi/nfit: Block function zero DSMs
  libnvdimm/security: Require nvdimm_security_setup_events() to succeed
  nfit_test: fix security state pull for nvdimm security nfit_test

Pull input fixes from Dmitry Torokhov:
 "A fixup for the input_event fix for y2038 Sparc64, and couple other
  minor fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: input_event - fix the CONFIG_SPARC64 mixup
  Input: olpc_apsp - assign priv->dev earlier
  Input: uinput - fix undefined behavior in uinput_validate_absinfo()
  Input: raspberrypi-ts - fix link error
  Input: xpad - add support for SteelSeries Stratus Duo
  Input: input_event - provide override for sparc64

Pull networking fixes from David Miller:

 1) Count ttl-dropped frames properly in mac80211, from Bob Copeland.

 2) Integer overflow in ktime handling of bcm can code, from Oliver
    Hartkopp.

 3) Fix RX desc handling wrt. hw checksumming in ravb, from Simon
    Horman.

 4) Various hash key fixes in hv_netvsc, from Haiyang Zhang.

 5) Use after free in ax25, from Eric Dumazet.

 6) Several fixes to the SSN support in SCTP, from Xin Long.

 7) Do not process frames after a NAPI reschedule in ibmveth, from
    Thomas Falcon.

 8) Fix NLA_POLICY_NESTED arguments, from Johannes Berg.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits)
  qed: Revert error handling changes.
  cfg80211: extend range deviation for DMG
  cfg80211: reg: remove warn_on for a normal case
  mac80211: Add attribute aligned(2) to struct 'action'
  mac80211: don't initiate TDLS connection if station is not associated to AP
  nl80211: fix NLA_POLICY_NESTED() arguments
  ibmveth: Do not process frames after calling napi_reschedule
  net: dev_is_mac_header_xmit() true for ARPHRD_RAWIP
  net: usb: asix: ax88772_bind return error when hw_reset fail
  MAINTAINERS: Update cavium networking drivers
  net/mlx4_core: Fix error handling when initializing CQ bufs in the driver
  net/mlx4_core: Add masking for a few queries on HCA caps
  sctp: set flow sport from saddr only when it's 0
  sctp: set chunk transport correctly when it's a new asoc
  sctp: improve the events for sctp stream adding
  sctp: improve the events for sctp stream reset
  ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel
  ax25: fix possible use-after-free
  sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe
  hv_netvsc: fix typos in code comments
  ...

We can't touch a bio after ->make_request_fn(), for all we know it could
already have been completed by the time this function returns.

This reverts commit 698cef17.

Reported-by: syzbot+4df6ca820108fd248943@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull smb3 fixes from Steve French:
 "A set of small smb3 fixes, some fixing various crediting issues
  discovered during xfstest runs, five for stable"

* tag '5.0-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: print CIFSMaxBufSize as part of /proc/fs/cifs/DebugData
  smb3: add credits we receive from oplock/break PDUs
  CIFS: Fix mounts if the client is low on credits
  CIFS: Do not assume one credit for async responses
  CIFS: Fix credit calculations in compound mid callback
  CIFS: Fix credit calculation for encrypted reads with errors
  CIFS: Fix credits calculations for reads with errors
  CIFS: Do not reconnect TCP session in add_credits()
  smb3: Cleanup license mess
  CIFS: Fix possible hang during async MTU reads and writes
  cifs: fix memory leak of an allocated cifs_ntsd structure

Pull VFIO fixes from Alex Williamson:

 - cleanup licenses in new files (Thomas Gleixner)

 - cleanup new compiler warnings (Alexey Kardashevskiy)

* tag 'vfio-v5.0-rc4' of git://github.com/awilliam/linux-vfio:
  vfio-pci/nvlink2: Fix ancient gcc warnings
  vfio/pci: Cleanup license mess

Pull SCSI fixes from James Bottomley:
 "Six fixes, all of which appear to have user visible consequences.

  The DMA one is a regression fix from the merge window and of the
  others, four are driver specific and one specific to the target code"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: Use explicit access size in ufshcd_dump_regs
  scsi: tcmu: fix use after free
  scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()
  scsi: lpfc: nvmet: avoid hang / use-after-free when destroying targetport
  scsi: lpfc: nvme: avoid hang / use-after-free when destroying localport
  scsi: communicate max segment size to the DMA mapping code

Pull block fixes from Jens Axboe:
 "A collection of fixes for this release. This contains:

   - Silence sparse rightfully complaining about non-static wbt
     functions (Bart)

   - Fixes for the zoned comments/ioctl documentation (Damien)

   - direct-io fix that's been lingering for a while (Ernesto)

   - cgroup writeback fix (Tejun)

   - Set of NVMe patches for nvme-rdma/tcp (Sagi, Hannes, Raju)

   - Block recursion tracking fix (Ming)

   - Fix debugfs command flag naming for a few flags (Jianchao)"

* tag 'for-linus-20190125' of git://git.kernel.dk/linux-block:
  block: Fix comment typo
  uapi: fix ioctl documentation
  blk-wbt: Declare local functions static
  blk-mq: fix the cmd_flag_name array
  nvme-multipath: drop optimization for static ANA group IDs
  nvmet-rdma: fix null dereference under heavy load
  nvme-rdma: rework queue maps handling
  nvme-tcp: fix timeout handler
  nvme-rdma: fix timeout handler
  writeback: synchronize sync(2) against cgroup writeback membership switches
  block: cover another queue enter recursion via BIO_QUEUE_ENTERED
  direct-io: allow direct writes to empty inodes

This is new code and not bug fixes.

This reverts all changes added by merge commit
8fb18be9Signed-off-by: David S. Miller <davem@davemloft.net>