- 12 Oct, 2007 40 commits
-
-
Matthew Wilcox authored
We can simply call the internal done function directly Signed-off-by:
Matthew Wilcox <willy@linux.intel.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
James Bottomley authored
Because scsi_print_sense_hdr prefixes with KERN_INFO, the output from scsi_io_completion looks like: sd 0:0:0:0: [sdb] Device not ready: <6>: Sense Key : 0x2 [current] : ASC=0x4 ASCQ=0x3 By using scsi_show_sense_hdr, we can get the much more appealing output: sd 0:0:0:0: [sdb] Device not ready: Sense Key : 0x2 [current] sd 0:0:0:0: [sdb] Device not ready: ASC=0x4 ASCQ=0x3 Acked-by:
-
Matthew Wilcox authored
The pid field is a duplicate of the serial_number field and has been scheduled for removal for a long time. A few drivers were still using it, so just change them to use serial_number instead. Signed-off-by:
-
Kay Sievers authored
Signed-off-by:
Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
-
Bernhard Walle authored
This patch just makes the version number in ips.c and ips.h consistent. It seems that this has been forgotten in a60768e2. It also removes code duplication, each number is now only once in the code to avoid similar errors in the future. Signed-off-by:
Bernhard Walle <bwalle@suse.de> Acked-by:
Mark Salyzyn <aacraid@adaptec.com> Signed-off-by:
-
Matthew Wilcox authored
We were releasing the IRQ before removing the host, so commands could still be coming in which would never be seen by the interrupt handler. Just remove the host before releasing the IRQ to close this race. Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
Matthew Wilcox authored
If an error occurred during initialisation, we would sometimes fail to call scsi_host_put() and thus end up with a leaked scsi_host. It was also possible to miss calling scsi_remove_host(). Signed-off-by:
-
Matthew Wilcox authored
If scsi_add_host returned an error, the host would never be freed. We need to call scsi_host_put() if an error happens. Signed-off-by:
-
Matthew Wilcox authored
We were releasing the IRQ before removing the host, so commands could still be coming in which would never be seen by the interrupt handler. Just remove the host before releasing the IRQ to close this race. Signed-off-by:
-
Matthew Wilcox authored
We were releasing the IRQ before removing the host, so commands could still be coming in which would never be seen by the interrupt handler. Just remove the host before releasing the IRQ to close this race. Signed-off-by:
-
Matthew Wilcox authored
Since ncr53c8xx_attach() calls scsi_host_put(), make ncr53c8xx_release() call scsi_host_put() too, for symmetry. Both callers already expect it to put the host for them, so that works out nicely. While the zalon driver does 'use' the host pointer afterwards, it only compares it for equality and doesn't dereference it, so that's safe. While I'm at it, get rid of pointless checks for NULL, use shost_priv() and change ncr53c8xx_release to return void. Signed-off-by:
-
Matthew Wilcox authored
We were releasing the block devices before removing the host, so commands could still be coming in which would cause a panic. Just remove the host before releasing the block devices to close this race. Signed-off-by:
-
Matthew Wilcox authored
There was a missing call to scsi_host_put() causing us to leak a scsi host every time this module was unloaded. Signed-off-by:
-
Matthew Wilcox authored
If kthread_run failed, we would fail to scan the host, and leak the allocated async_scan_data. Since using a separate thread is just an optimisation, do the scan synchronously if we fail to spawn a thread. Signed-off-by:
-
Matthew Wilcox authored
The current code prints: scsi 13:0:4:0: scsi: Device offlined - not ready after error recovery which is repetitively redundant. This patch changes that message to: scsi 6:0:6:0: Device offlined - not ready after error recovery Signed-off-by:
-
James Bottomley authored
sg uses a scheme to reallocate a single contiguous array of all its pointers for lookup and management. This didn't matter too much when sg could only attach 256 nodes, but now the maximum has been bumped up to 32k we're starting to push the limits of the maximum allocatable contiguous memory. The solution to this is to eliminate the static array and do everything via idr, which this patch does. Acked-by:
Douglas Gilbert <dougg@torque.net> Signed-off-by:
-
Matthias Kaehlcke authored
The OnStream SCSI Tape driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by:
Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Reviewed-by:
Satyam Sharma <satyam@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Willem Riede <wrlk@riede.org> Signed-off-by:
-
Jeff Garzik authored
* Remove IRQF_DISABLED, it is clearly wrong for this driver. * Remove wasteful spin_lock_irqsave() in interrupt handler. The lighter-weight spin_lock() is all that's needed. * Annotate with FIXME where arcmsr_interrupt() is called without any spinlock being acquired. * Eliminate pointless cast from void pointer in arcmsr_do_interrupt() [jejb: conflict resolution] Signed-off-by:
Jeff Garzik <jeff@garzik.org> Acked-by:
Nick Cheng <nick.cheng@areca.com.tw> Signed-off-by:
-
Jeff Garzik authored
Remove _interruptible, since receiving a signal while waiting on a hardware condition will simply cause the driver to busy-wait. Using msleep_interruptible() is rarely the right thing to do, when waiting on a hardware condition to change. Also, replace msleep with ssleep while doing this, where appropriate. [jejb: fix up merge conflict] Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
Do not adjust the iIDMA speed on ports which have a faster link-speed than the HBA itself. Signed-off-by:
-
Andrew Vasquez authored
Since MSI-X vectors do not require a clearing "handshake" from the system perspective, and the registered handler will not be called more than once for one occurrence of receipt of a vector, there is no requirement to flush the risc register write clearing the interrupt condition in the risc. Also, since the msi-x registered handlers are optimised for a particular vector, it is preferable to handle the one vector received per invocation of the handler. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Make several needlessly global functions static: - qla2x00_mark_vp_devices_dead() - qla24xx_configure_vp() Remove unused function qla24xx_modify_vport(). Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Drop usage of legacy to_qla_host() macro. Signed-off-by:
-
Andrew Vasquez authored
This change reduces by as much as 16% the memory footprint for each allocated sbr_t structure requested from the mempool. Signed-off-by:
-
Seokmann Ju authored
Signed-off-by:
-
Andrew Vasquez authored
Original code, incorrectly passed the address-of a pointer rather than the pointer value itself. Signed-off-by:
-
Andrew Vasquez authored
Also remove legacy '/proc' name during OS_DEVICE_NAME registration. Signed-off-by:
-
Ravi Anand authored
Where the DPC logic would get jammed into continuously reloging-into a port. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
There's no need to reset the RISC prior to pausing. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Seokmann Ju authored
Additional cleanups and Signed-off-by:
-
Joe Carnuccio authored
Additional cleanups and Signed-off-by:
-
Andrew Vasquez authored
Newer ISPs support a mechanism to read and write flash-memory via the firmware LOAD/DUMP memory mailbox command routines. When supported, utilizing these mechanisms significantly reduces overall access times. Signed-off-by:
-
Andrew Vasquez authored
Add IO-base-window accessor functions. Merge duplicate RISC-pause and soft-reset code segments. Drop 'eye-watering' __iomem casting. Signed-off-by:
-
James Bottomley authored
One of the intents of the block prep function was to allow ULDs to use it for preprocessing. The original SCSI model was to have a single prep function and add a pointer indirect filter to build the necessary commands. This patch reverses that, does away with the init_command field of the scsi_driver structure and makes ULDs attach directly to the prep function instead. The value is really that it allows us to begin to separate the ULDs from the SCSI mid layer (as long as they don't use any core functions---which is hard at the moment---a ULD doesn't even need SCSI to bind). Acked-by:
Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
David Woodhouse authored
If you build a multiplatform kernel for iSeries and pSeries, with ibmvscsic support, the resulting client doesn't work on iSeries. This fixes that, using the appropriate low-level operations for the machine detected at runtime. [jejb: fixed up rejections around the srp transport patch] Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Acked by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
