The bool kconfig option added to ixgbe and myri10ge for DCA is ambigous,
so this patch adds a description to the kconfig option.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

1. compile fix for irqreturn_t type change
2. restore ->poll_controller after CONFIG_PPC_CPM_NEW_BINDING transition
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

While adding support for MIGRATE/KMADDRESS in strongSwan (as specified
in draft-ebalard-mext-pfkey-enhanced-migrate-00), Andreas Steffen
noticed that XFRMA_KMADDRESS attribute passed to userland contains the
local address twice (remote provides local address instead of remote
one).

This bug in copy_to_user_kmaddress() affects only key managers that use
native XFRM interface (key managers that use PF_KEY are not affected).

For the record, the bug was in the initial changeset I posted which
added support for KMADDRESS (13c1d189
'xfrm: MIGRATE enhancements (draft-ebalard-mext-pfkey-enhanced-migrate)').
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Reported-by: Andreas Steffen <andreas.steffen@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts 51ac3bef ('SMC91x: delete
unused local variable "lp"') and adds __maybe_unused markers to these
(potentially) unused variables.

The issue is that in some configurations SMC_IO_SHIFT evaluates
to '(lp->io_shift)', but in some others it's plain '0'.

Based upon a build failure report from Manuel Lauss.
Signed-off-by: David S. Miller <davem@davemloft.net>

UDP packets received in udpv6_recvmsg() are not only IPv6 UDP packets, but
also have IPv4 UDP packets, so when do the counter of UDP_MIB_INERRORS in
udpv6_recvmsg(), we should check whether the packet is a IPv6 UDP packet
or a IPv4 UDP packet.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If UDP echo is sent to xinetd/echo-dgram, the UDP reply will be received
at the sender. But the SNMP counter of UDP_MIB_INDATAGRAMS will be not
increased, UDP6_MIB_INDATAGRAMS will be increased instead.

  Endpoint A                      Endpoint B
  UDP Echo request ----------->
  (IPv4, Dst port=7)
                   <----------    UDP Echo Reply
                                  (IPv4, Src port=7)

This bug is come from this patch cb75994e.

It do counter UDP[6]_MIB_INDATAGRAMS until udp[v6]_recvmsg. Because
xinetd used IPv6 socket to receive UDP messages, thus, when received
UDP packet, the UDP6_MIB_INDATAGRAMS will be increased in function
udpv6_recvmsg() even if the packet is a IPv4 UDP packet.

This patch fixed the problem.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_kfree_skb should not be called with irqs disabled, use dev_kfree_skb_irq
instead. The warning caused looks like this:

======================================================
[ INFO: hard-safe -> hard-unsafe lock order detected ]
2.6.28-rc1 #273
------------------------------------------------------
swapper/0 [HC0[0]:SC1[2]:HE0:SE0] is trying to acquire:
 (clock-AF_INET){-..+}, at: [<4015c17c>] _sock_def_write_space+0x28/0xd8

and this task is already holding:
 (&lp->lock){++..}, at: [<4013f230>] _smc911x_hard_start_xmit+0x30/0x4b8
which would create a new lock dependency:
 (&lp->lock){++..} -> (clock-AF_INET){-..+}
Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

fix problem of return value

net/unix/af_unix.c: unix_net_init()
when error appears, it should return 'error', not always return 0.
Signed-off-by: Jianjun Kong <jianjun@zeuux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current UDP multicast delivery is not namespace aware.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 04a4bb55 ("net: add
skb_recycle_check() to enable netdriver skb recycling") added a
method for network drivers to recycle skbuffs, but while use of
this mechanism was documented in the commit message, it should
really have been added as a docbook comment as well -- this
patch does that.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steps to reproduce:

	#/usr/sbin/setkey -f
	flush;
	spdflush;

	add 192.168.0.42 192.168.0.1 ah 24500 -A hmac-md5 "1234567890123456";
	add 192.168.0.42 192.168.0.1 esp 24501 -E 3des-cbc "123456789012123456789012";

	spdadd 192.168.0.42 192.168.0.1 any -P out ipsec
		esp/transport//require
		ah/transport//require;

setkey: invalid keymsg length

Policy dump will bail out with the same message after that.

-recv(4, "\2\16\0\0\32\0\3\0\0\0\0\0\37\r\0\0\3\0\5\0\377 \0\0\2\0\0\0\300\250\0*\0"..., 32768, 0) = 208
+recv(4, "\2\16\0\0\36\0\3\0\0\0\0\0H\t\0\0\3\0\5\0\377 \0\0\2\0\0\0\300\250\0*\0"..., 32768, 0) = 208
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Inspired by Sergio Luis' similar patches, I finally found
a case which is trivial enough that spatch won't choke
on it.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

I noticed that, under certain conditions, ESRCH can be leaked from the
xfrm layer to user space through sys_connect. In particular, this seems
to happen reliably when the kernel fails to resolve a template either
because the AF_KEY receive buffer being used by racoon is full or
because the SA entry we are trying to use is in XFRM_STATE_EXPIRED
state.

However, since this could be a transient issue it could be argued that
EAGAIN would be more appropriate. Besides this error code is not even
documented in the man page for sys_connect (as of man-pages 3.07).
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

As noticed by Saikiran Madugula, commit 7447ef63
("loopback: Remove rest of LOOPBACK_TSO code.") got rid of
emulate_large_send_offload() but didn't get rid of the call
site as well.
Signed-off-by: David S. Miller <davem@davemloft.net>

register_pernet_gen_device() can't be used is nf_conntrack_pptp module is
also used (compiled in or loaded).

Right now, proto_gre_net_exit() is called before nf_conntrack_pptp_net_exit().
The former shutdowns and frees GRE piece of netns, however the latter
absolutely needs it to flush keymap. Oops is inevitable.

Switch to shiny new register_pernet_gen_subsys() to get correct ordering in
netns ops list.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

netns ops which are registered with register_pernet_gen_device() are
shutdown strictly before those which are registered with
register_pernet_subsys(). Sometimes this leads to opposite (read: buggy)
shutdown ordering between two modules.

Add register_pernet_gen_subsys()/unregister_pernet_gen_subsys() for modules
which aren't elite enough for entry in struct net, and which can't use
register_pernet_gen_device(). PPTP conntracking module is such one.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove excess kernel-doc function parameters from networking header
& driver files:

Warning(include/net/sock.h:946): Excess function parameter or struct member 'sk' description in 'sk_filter_release'
Warning(include/linux/netdevice.h:1545): Excess function parameter or struct member 'cpu' description in 'netif_tx_lock'
Warning(drivers/net/wan/z85230.c:712): Excess function parameter or struct member 'regs' description in 'z8530_interrupt'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move SKB trim before we lookup the socket so we don't have to
put it on failure.

Based upon an initial patch by Jarek Poplawski and suggestions
from Herbert Xu.
Signed-off-by: David S. Miller <davem@davemloft.net>

The link may be up already via the chip's reset strapping, or though action
of U-Boot, or from the last time the interface was brought up.  Resetting
the link causes it to go down for several seconds.  This can significantly
increase the time from power-on to DHCP completion and a device being
accessible to the network.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

The init_phy() function attaches to the PHY, then configures the
SerDes<->TBI link (in SGMII mode).  The TBI is on the MDIO bus with the PHY
(sort of) and is accessed via the gianfar's MDIO registers, using the
functions gfar_local_mdio_read/write(), which don't do any locking.

The previously attached PHY will start a work-queue on a timer, and
probably an irq handler as well, which will talk to the PHY and thus use
the MDIO bus.  This uses phy_read/write(), which have locking, but not
against the gfar_local_mdio versions.

The result is that PHY code will try to use the MDIO bus at the same time
as the SerDes setup code, corrupting the transfers.

Setting up the SerDes before attaching to the PHY will insure that there is
no race between the SerDes code and *our* PHY, but doesn't fix everything.
Typically the PHYs for all gianfar devices are on the same MDIO bus, which
is associated with the first gianfar device.  This means that the first
gianfar's SerDes code could corrupt the MDIO transfers for a different
gianfar's PHY.

The lock used by phy_read/write() is contained in the mii_bus structure,
which is pointed to by the PHY.  This is difficult to access from the
gianfar drivers, as there is no link between a gianfar device and the
mii_bus which shares the same MDIO registers.  As far as the device layer
and drivers are concerned they are two unrelated devices (which happen to
share registers).

Generally all gianfar devices' PHYs will be on the bus associated with the
first gianfar.  But this might not be the case, so simply locking the
gianfar's PHY's mii bus might not lock the mii bus that the SerDes setup
code is going to use.

We solve this by having the code that creates the gianfar platform device
look in the device tree for an mdio device that shares the gianfar's
registers.  If one is found the ID of its platform device is saved in the
gianfar's platform data.

A new function in the gianfar mii code, gfar_get_miibus(), can use the bus
ID to search through the platform devices for a gianfar_mdio device with
the right ID.  The platform device's driver data is the mii_bus structure,
which the SerDes setup code can use to lock the current bus.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
CC: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

When the at91_ether driver is using a GPIO for its PHY interrupt,
be sure to request (and later, if needed, free) that GPIO.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Acoording commit aa24886e,
dma_free_coherent() need irqs enabled.

This patch fix following warning messages:

WARNING: at linux/arch/x86/kernel/pci-dma.c:376 dma_free_coherent+0xaa/0xb0()

Call Trace:
 [<ffffffff8023f80f>] warn_on_slowpath+0x5f/0x90
 [<ffffffff80496ffa>] ? __kfree_skb+0x3a/0xa0
 [<ffffffff802a4723>] ? discard_slab+0x23/0x40
 [<ffffffff8021274a>] dma_free_coherent+0xaa/0xb0
 [<ffffffff8043668f>] amd8111e_close+0x10f/0x1b0
 [<ffffffff8049f3ae>] dev_close+0x5e/0xb0
 [<ffffffff8049efa1>] dev_change_flags+0xa1/0x1e0
 [<ffffffff806b2171>] ic_close_devs+0x36/0x4e
 [<ffffffff806b29ee>] ip_auto_config+0x581/0x10f3
 [<ffffffff803a6e19>] ? kobject_add+0x69/0x90
 [<ffffffff803a698a>] ? kobject_get+0x1a/0x30
 [<ffffffff803a785b>] ? kobject_uevent+0xb/0x10
 [<ffffffff803a6c62>] ? kset_register+0x52/0x60
 [<ffffffff803a6f9b>] ? kset_create_and_add+0x6b/0xa0
 [<ffffffff804e2e74>] ? tcp_ca_find+0x24/0x50
 [<ffffffff806b246d>] ? ip_auto_config+0x0/0x10f3
 [<ffffffff8020903c>] _stext+0x3c/0x150
 [<ffffffff802772d3>] ? register_irq_proc+0xd3/0xf0
 [<ffffffff802f0000>] ? mb_cache_create+0x80/0x1f0
 [<ffffffff80688693>] kernel_init+0x141/0x1b8
 [<ffffffff80688552>] ? kernel_init+0x0/0x1b8
 [<ffffffff8020d609>] child_rip+0xa/0x11
 [<ffffffff80688552>] ? kernel_init+0x0/0x1b8
 [<ffffffff80688552>] ? kernel_init+0x0/0x1b8
 [<ffffffff8020d5ff>] ? child_rip+0x0/0x11
Signed-off-by: Chunbo Luo <chunbo.luo@windriver.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Commit 401c0aab introduced a regression
in the atl1 driver by storing the VLAN tag in the wrong TX descriptor
field.

This patch causes the VLAN tag to be stored in its proper location.
Tested-by: Ramon Casellas <ramon.casellas@cttc.es>
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Use mmiowb() to ensure "stop" and "go" commands are sent in order on ia64.
Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

A panic was discovered with bonding when using mode 5 or 6 and trying to
remove the slaves from the bond after the interface was taken down.
When calling 'ifconfig bond0 down' the following happens:

    bond_close()
        bond_alb_deinitialize()
            tlb_deinitialize()
		kfree(bond_info->tx_hashtbl)
                bond_info->tx_hashtbl = NULL

Unfortunately if there are still slaves in the bond, when removing the
module the following happens:

    bonding_exit()
        bond_free_all()
            bond_release_all()
                bond_alb_deinit_slave()
                    tlb_clear_slave()
                        tx_hash_table = BOND_ALB_INFO(bond).tx_hashtbl
			u32 next_index = tx_hash_table[index].next

As you might guess we panic when trying to access a few entries into the
table that no longer exists.

I experimented with several options (like moving the calls to
tlb_deinitialize somewhere else), but it really makes the most sense to
be part of the bond_close routine.  It also didn't seem logical move
tlb_clear_slave around too much, so the simplest option seems to add a
check in tlb_clear_slave to make sure we haven't already wiped the
tx_hashtbl away before searching for all the non-existent hash-table
entries that used to point to the slave as the output interface.
Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

This patch reworks the resource free logic performed at the time
a bonding device is released.  This (a) closes two resource leaks, one
for workqueues and one for multicast lists, and (b) improves commonality
of code between the "destroy one" and "destroy all" paths by performing
final free activity via destructor instead of explicitly (and differently)
in each path.

"Sean E. Millichamp" <sean@bruenor.org> reported the workqueue
leak, and included a different patch.
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

During the rework of the mii monitor for:

  commit f0c76d61
  Author: Jay Vosburgh <fubar@us.ibm.com>
  Date:   Wed Jul 2 18:21:58 2008 -0700

    bonding: refactor mii monitor

I left out the increment of the link failure counter.  This
patch corrects that omission.
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

* 'for-linus' of git://neil.brown.name/md:
  md: destroy partitions and notify udev when md array is stopped.

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: fix irq vectors.
  lguest: fix early_ioremap.
  lguest: fix example launcher compile after moved asm-x86 dir.

Merge branch 'x86-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: cpu_index build fix
  x86/voyager: fix missing cpu_index initialisation
  x86/voyager: fix compile breakage caused by dc1e35c6
  x86: fix /dev/mem mmap breakage when PAT is disabled
  x86/voyager: fix compile breakage casued by x86: move prefill_possible_map calling early
  x86: use CONFIG_X86_SMP instead of CONFIG_SMP
  x86/voyager: fix boot breakage caused by x86: boot secondary cpus through initial_code
  x86, uv: fix compile error in uv_hub.h
  i386/PAE: fix pud_page()
  x86: remove debug code from arch_add_memory()
  x86: start annotating early ioremap pointers with __iomem
  x86: two trivial sparse annotations
  x86: fix init_memory_mapping for [dc000000 - e0000000) - v2

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: remove sched-design.txt from 00-INDEX
  sched: change sched_debug's mode to 0444

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ftrace: handle archs that do not support irqs_disabled_flags

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  resources: fix x86info results ioremap.c:226 __ioremap_caller+0xf2/0x2d6() WARNINGs

	do_IRQ: cannot handle IRQ -1 vector 0x20 cpu 0
	------------[ cut here ]------------
	kernel BUG at arch/x86/kernel/irq_32.c:219!

We're not ISA: we have a 1:1 mapping from vectors to irqs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

dmi_scan_machine breaks under lguest:
	lguest: unhandled trap 14 at 0xc04edeae (0xffa00000)

This is because we use current_cr3 for the read_cr3() paravirt
function, and it isn't set until the first cr3 change.  We got away
with it until this happened.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>