- 27 Jan, 2024 21 commits
-
-
FUJITA Tomonori authored
The relative paths like the following are bothersome and don't work with `O=` builds: //! C headers: [`include/linux/phy.h`](../../../../../../../include/linux/phy.h). This updates such links by using the `srctree`-relative link feature introduced in 6.8-rc1 like: //! C headers: [`include/linux/phy.h`](srctree/include/linux/phy.h). Signed-off-by:
FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by:
Trevor Gross <tmgross@umich.edu> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Oleksij Rempel says: ==================== net: dsa: microchip: implement PHY loopback ==================== Link: https://lore.kernel.org/r/20240124123314.734815-1-o.rempel@pengutronix.deSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Oleksij Rempel authored
Correct the PHY loopback bit handling in the ksz8_w_phy_bmcr and ksz8_r_phy_bmcr functions for KSZ8794 and KSZ8873 variants in the ksz8795 driver. Previously, the code erroneously used Bit 7 of port register 0xD for both chip variants, which is actually for LED configuration. This update ensures the correct registers and bits are used for the PHY loopback feature: - For KSZ8794: Use 0xF / Bit 7. - For KSZ8873: Use 0xD / Bit 0. The lack of loopback support was seen on KSZ8873 system by using "ethtool -t lanX". After this patch, the ethtool selftest will work, but only if port is not part of a bridge. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Link: https://lore.kernel.org/r/20240124123314.734815-4-o.rempel@pengutronix.deSigned-off-by:
-
Oleksij Rempel authored
Remove the manual checks for register value changes in the ksz8_w_phy_bmcr function. Instead, rely on regmap_update_bits() for optimizing register updates. Signed-off-by:
-
Oleksij Rempel authored
Isolate the Basic Mode Control Register (BMCR) operations in the ksz8795 driver by moving the BMCR-related code segments from the ksz8_r_phy() and ksz8_w_phy() functions to newly created ksz8_r_phy_bmcr() and ksz8_w_phy_bmcr() functions. Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2024-01-26 We've added 107 non-merge commits during the last 4 day(s) which contain a total of 101 files changed, 6009 insertions(+), 1260 deletions(-). The main changes are: 1) Add BPF token support to delegate a subset of BPF subsystem functionality from privileged system-wide daemons such as systemd through special mount options for userns-bound BPF fs to a trusted & unprivileged application. With addressed changes from Christian and Linus' reviews, from Andrii Nakryiko. 2) Support registration of struct_ops types from modules which helps projects like fuse-bpf that seeks to implement a new struct_ops type, from Kui-Feng Lee. 3) Add support for retrieval of cookies for perf/kprobe multi links, from Jiri Olsa. 4) Bigger batch of prep-work for the BPF verifier to eventually support preserving boundaries and tracking scalars on narrowing fills, from Maxim Mikityanskiy. 5) Extend the tc BPF flavor to support arbitrary TCP SYN cookies to help with the scenario of SYN floods, from Kuniyuki Iwashima. 6) Add code generation to inline the bpf_kptr_xchg() helper which improves performance when stashing/popping the allocated BPF objects, from Hou Tao. 7) Extend BPF verifier to track aligned ST stores as imprecise spilled registers, from Yonghong Song. 8) Several fixes to BPF selftests around inline asm constraints and unsupported VLA code generation, from Jose E. Marchesi. 9) Various updates to the BPF IETF instruction set draft document such as the introduction of conformance groups for instructions, from Dave Thaler. 10) Fix BPF verifier to make infinite loop detection in is_state_visited() exact to catch some too lax spill/fill corner cases, from Eduard Zingerman. 11) Refactor the BPF verifier pointer ALU check to allow ALU explicitly instead of implicitly for various register types, from Hao Sun. 12) Fix the flaky tc_redirect_dtime BPF selftest due to slowness in neighbor advertisement at setup time, from Martin KaFai Lau. 13) Change BPF selftests to skip callback tests for the case when the JIT is disabled, from Tiezhu Yang. 14) Add a small extension to libbpf which allows to auto create a map-in-map's inner map, from Andrey Grafin. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (107 commits) selftests/bpf: Add missing line break in test_verifier bpf, docs: Clarify definitions of various instructions bpf: Fix error checks against bpf_get_btf_vmlinux(). bpf: One more maintainer for libbpf and BPF selftests selftests/bpf: Incorporate LSM policy to token-based tests selftests/bpf: Add tests for LIBBPF_BPF_TOKEN_PATH envvar libbpf: Support BPF token path setting through LIBBPF_BPF_TOKEN_PATH envvar selftests/bpf: Add tests for BPF object load with implicit token selftests/bpf: Add BPF object loading tests with explicit token passing libbpf: Wire up BPF token support at BPF object level libbpf: Wire up token_fd into feature probing logic libbpf: Move feature detection code into its own file libbpf: Further decouple feature checking logic from bpf_object libbpf: Split feature detectors definitions from cached results selftests/bpf: Utilize string values for delegate_xxx mount options bpf: Support symbolic BPF FS delegation mount options bpf: Fail BPF_TOKEN_CREATE if no delegation option was set on BPF FS bpf,selinux: Allocate bpf_security_struct per BPF token selftests/bpf: Add BPF token-enabled tests libbpf: Add BPF token support to bpf_prog_load() API ... ==================== Link: https://lore.kernel.org/r/20240126215710.19855-1-daniel@iogearbox.netSigned-off-by: -
Jakub Kicinski authored
Christian Marangi says: ==================== net: phy: generic polarity + LED support for qca808x This small series add LEDs support for qca808x. QCA808x apply on PHY reset a strange polarity settings and require some tweak to apply a more common configuration found on devices. On adding support for it, it was pointed out that a similar feature is also being implemented for a marvell PHY where LED polarity is set per LED (and not global) and also have a special mode where the LED is tristated. The first 3 patch are to generalize this as we expect more PHY in the future to have a similar configuration. The implementation is extensible to support additional special mode in the future with minimal changes and don't create regression on already implemented PHY drivers. ==================== Link: https://lore.kernel.org/r/20240125203702.4552-1-ansuelsmth@gmail.comSigned-off-by:
-
Christian Marangi authored
Add LED support for QCA8081 PHY. Documentation for this LEDs PHY is very scarce even with NDA access to Documentation for OEMs. Only the blink pattern are documented and are very confusing most of the time. No documentation is present about forcing the LED on/off or to always blink. Those settings were reversed by poking the regs and trying to find the correct bits to trigger these modes. Some bits mode are not clear and maybe the documentation option are not 100% correct. For the sake of LED support the reversed option are enough to add support for current LED APIs. Supported HW control modes are: - tx - rx - link_10 - link_100 - link_1000 - link_2500 - half_duplex - full_duplex Also add support for LED polarity set to set LED polarity to active high or low. QSDK sets this value to high by default but PHY reset value doesn't have this enabled by default. QSDK also sets 2 additional bits but their usage is not clear, info about this is added in the header. It was verified that for correct function of the LED if active high is needed, only BIT 6 is needed. Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240125203702.4552-6-ansuelsmth@gmail.comSigned-off-by:
-
Christian Marangi authored
Add Documentation for QCA808x PHYs for the additional LED configuration for this PHY. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20240125203702.4552-5-ansuelsmth@gmail.comSigned-off-by:
-
Christian Marangi authored
Add support for PHY LEDs polarity modes. Some PHY require LED to be set to active low to be turned ON. Adds support for this by declaring active-low property in DT. PHY driver needs to declare .led_polarity_set() to configure LED polarity modes. Function will pass the index with the LED index and a bitmap with all the required modes to set. Current supported modes are: - active-low with the flag PHY_LED_ACTIVE_LOW. LED is set to active-low to turn it ON. - inactive-high-impedance with the flag PHY_LED_INACTIVE_HIGH_IMPEDANCE. LED is set to high impedance to turn it OFF. Signed-off-by:
-
Christian Marangi authored
Document LED inactive high impedance mode to set the LED to require high impedance configuration to be turned OFF. Signed-off-by:
Lee Jones <lee@kernel.org> Reviewed-by:
-
Christian Marangi authored
Move LED active-low property to common.yaml. This property is currently defined multiple times by bcm LEDs. This property will now be supported in a generic way for PHY LEDs with the use of a generic function. With active-low bool property not defined, active-high is always assumed. Signed-off-by:
-
Kees Cook authored
A potential string truncation was reported in bnx2x_fill_fw_str(), when a long bp->fw_ver and a long phy_fw_ver might coexist, but seems unlikely with real-world hardware. Use scnprintf() to indicate the intent that truncations are tolerated. While reading this code, I found a collection of various buffer size counting issues. None looked like they might lead to a buffer overflow with current code (the small buffers are 20 bytes and might only ever consume 10 bytes twice with a trailing %NUL). However, early truncation (due to a %NUL in the middle of the string) might be happening under likely rare conditions. Regardless fix the formatters and related functions: - Switch from a separate strscpy() to just adding an additional "%s" to the format string that immediately follows it in bnx2x_fill_fw_str(). - Use sizeof() universally instead of using unbound defines. - Fix bnx2x_7101_format_ver() and bnx2x_null_format_ver() to report the number of characters written, not including the trailing %NUL (as already done with the other firmware formatting functions). - Require space for at least 1 byte in bnx2x_get_ext_phy_fw_version() for the trailing %NUL. - Correct the needed buffer size in bnx2x_3_seq_format_ver(). Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401260858.jZN6vD1k-lkp@intel.com/ Cc: Ariel Elior <aelior@marvell.com> Cc: Sudarsana Kalluru <skalluru@marvell.com> Cc: Manish Chopra <manishc@marvell.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20240126041044.work.220-kees@kernel.orgSigned-off-by:
-
Li Zhijian authored
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. coccinelle complains that there are still a couple of functions that use snprintf(). Convert them to sysfs_emit(). > ./drivers/ptp/ptp_sysfs.c:27:8-16: WARNING: please use sysfs_emit No functional change intended Signed-off-by:
Li Zhijian <lizhijian@fujitsu.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20240125015329.123023-1-lizhijian@fujitsu.comSigned-off-by:
-
Jakub Kicinski authored
Kuniyuki Iwashima says: ==================== af_unix: Random improvements for GC. If more than 16000 inflight AF_UNIX sockets exist on a host, each sendmsg() will be forced to wait for unix_gc() even if a process is not sending any FD. This series tries not to impose such a penalty on sane users who do not send AF_UNIX FDs or do not have inflight sockets more than SCM_MAX_FD * 8. The first patch can be backported to -stable. Cleanup patches for commit 69db702c ("io_uring/af_unix: disable sending io_uring over sockets") and large refactoring of GC will be followed later. v4: https://lore.kernel.org/netdev/20231219030102.27509-1-kuniyu@amazon.com/ v3: https://lore.kernel.org/netdev/20231218075020.60826-1-kuniyu@amazon.com/ v2: https://lore.kernel.org/netdev/20231123014747.66063-1-kuniyu@amazon.com/ v1: https://lore.kernel.org/netdev/20231122013629.28554-1-kuniyu@amazon.com/ ==================== Link: https://lore.kernel.org/r/20240123170856.41348-1-kuniyu@amazon.comSigned-off-by:
-
Kuniyuki Iwashima authored
If more than 16000 inflight AF_UNIX sockets exist and the garbage collector is not running, unix_(dgram|stream)_sendmsg() call unix_gc(). Also, they wait for unix_gc() to complete. In unix_gc(), all inflight AF_UNIX sockets are traversed at least once, and more if they are the GC candidate. Thus, sendmsg() significantly slows down with too many inflight AF_UNIX sockets. However, if a process sends data with no AF_UNIX FD, the sendmsg() call does not need to wait for GC. After this change, only the process that meets the condition below will be blocked under such a situation. 1) cmsg contains AF_UNIX socket 2) more than 32 AF_UNIX sent by the same user are still inflight Note that even a sendmsg() call that does not meet the condition but has AF_UNIX FD will be blocked later in unix_scm_to_skb() by the spinlock, but we allow that as a bonus for sane users. The results below are the time spent in unix_dgram_sendmsg() sending 1 byte of data with no FD 4096 times on a host where 32K inflight AF_UNIX sockets exist. Without series: the sane sendmsg() needs to wait gc unreasonably. $ sudo /usr/share/bcc/tools/funclatency -p 11165 unix_dgram_sendmsg Tracing 1 functions for "unix_dgram_sendmsg"... Hit Ctrl-C to end. ^C nsecs : count distribution [...] 524288 -> 1048575 : 0 | | 1048576 -> 2097151 : 3881 |****************************************| 2097152 -> 4194303 : 214 |** | 4194304 -> 8388607 : 1 | | avg = 1825567 nsecs, total: 7477526027 nsecs, count: 4096 With series: the sane sendmsg() can finish much faster. $ sudo /usr/share/bcc/tools/funclatency -p 8702 unix_dgram_sendmsg Tracing 1 functions for "unix_dgram_sendmsg"... Hit Ctrl-C to end. ^C nsecs : count distribution [...] 128 -> 255 : 0 | | 256 -> 511 : 4092 |****************************************| 512 -> 1023 : 2 | | 1024 -> 2047 : 0 | | 2048 -> 4095 : 0 | | 4096 -> 8191 : 1 | | 8192 -> 16383 : 1 | | avg = 410 nsecs, total: 1680510 nsecs, count: 4096 Signed-off-by:Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240123170856.41348-6-kuniyu@amazon.comSigned-off-by:
-
Kuniyuki Iwashima authored
If more than 16000 inflight AF_UNIX sockets exist and the garbage collector is not running, unix_(dgram|stream)_sendmsg() call unix_gc(). Also, they wait for unix_gc() to complete. In unix_gc(), all inflight AF_UNIX sockets are traversed at least once, and more if they are the GC candidate. Thus, sendmsg() significantly slows down with too many inflight AF_UNIX sockets. There is a small window to invoke multiple unix_gc() instances, which will then be blocked by the same spinlock except for one. Let's convert unix_gc() to use struct work so that it will not consume CPUs unnecessarily. Note WRITE_ONCE(gc_in_progress, true) is moved before running GC. If we leave the WRITE_ONCE() as is and use the following test to call flush_work(), a process might not call it. CPU 0 CPU 1 --- --- start work and call __unix_gc() if (work_pending(&unix_gc_work) || <-- false READ_ONCE(gc_in_progress)) <-- false flush_work(); <-- missed! WRITE_ONCE(gc_in_progress, true) Signed-off-by: -
Kuniyuki Iwashima authored
Currently, unix_get_socket() returns struct sock, but after calling it, we always cast it to unix_sk(). Let's return struct unix_sock from unix_get_socket(). Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240123170856.41348-4-kuniyu@amazon.comSigned-off-by:
-
Kuniyuki Iwashima authored
When touching unix_sk(sk)->inflight, we are always under spin_lock(&unix_gc_lock). Let's convert unix_sk(sk)->inflight to the normal unsigned long. Signed-off-by:
-
Kuniyuki Iwashima authored
gc_in_progress is changed under spin_lock(&unix_gc_lock), but wait_for_unix_gc() reads it locklessly. Let's use READ_ONCE(). Fixes: 5f23b734 ("net: Fix soft lockups/OOM issues w/ unix garbage collector") Signed-off-by:
-
Arınç ÜNAL authored
Quoting from commit 4223f865 ("net: dsa: mt7530: make NET_DSA_MT7530 select MEDIATEK_GE_PHY"): Make MediaTek MT753x DSA driver enable MediaTek Gigabit PHYs driver to properly control MT7530 and MT7531 switch PHYs. A noticeable change is that the behaviour of switchport interfaces going up-down-up-down is no longer there. Now, the switch can be used without the PHYs but, at the moment, every hardware design out there that I have seen uses them. For that, it would make the most sense to force the selection of MEDIATEK_GE_PHY for the MDIO interface which currently controls the MT7530 and MT7531 switches. Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20240122053451.8004-1-arinc.unal@arinc9.comSigned-off-by:
-
- 26 Jan, 2024 18 commits
-
-
Tiezhu Yang authored
There are no break lines in the test log for test_verifier #106 ~ #111 if jit is disabled, add the missing line break at the end of printf() to fix it. Without this patch: [root@linux bpf]# echo 0 > /proc/sys/net/core/bpf_jit_enable [root@linux bpf]# ./test_verifier 106 #106/p inline simple bpf_loop call SKIP (requires BPF JIT)Summary: 0 PASSED, 1 SKIPPED, 0 FAILED With this patch: [root@linux bpf]# echo 0 > /proc/sys/net/core/bpf_jit_enable [root@linux bpf]# ./test_verifier 106 #106/p inline simple bpf_loop call SKIP (requires BPF JIT) Summary: 0 PASSED, 1 SKIPPED, 0 FAILED Fixes: 0b50478f ("selftests/bpf: Skip callback tests if jit is disabled in test_verifier") Signed-off-by:
Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20240126015736.655-1-yangtiezhu@loongson.cn
-
Dave Thaler authored
Clarify definitions of several instructions: * BPF_NEG does not support BPF_X * BPF_CALL does not support BPF_JMP32 or BPF_X * BPF_EXIT does not support BPF_X * BPF_JA does not support BPF_X (was implied but not explicitly stated) Also fix a typo in the wide instruction figure where the field is actually named "opcode" not "code". Signed-off-by:
Dave Thaler <dthaler1968@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/bpf/20240126040050.8464-1-dthaler1968@gmail.com
-
Kui-Feng Lee authored
In bpf_struct_ops_map_alloc, it needs to check for NULL in the returned pointer of bpf_get_btf_vmlinux() when CONFIG_DEBUG_INFO_BTF is not set. ENOTSUPP is used to preserve the same behavior before the struct_ops kmod support. In the function check_struct_ops_btf_id(), instead of redoing the bpf_get_btf_vmlinux() that has already been done in syscall.c, the fix here is to check for prog->aux->attach_btf_id. BPF_PROG_TYPE_STRUCT_OPS must require attach_btf_id and syscall.c guarantees a valid attach_btf as long as attach_btf_id is set. When attach_btf_id is not set, this patch returns -ENOTSUPP because it is what the selftest in test_libbpf_probe_prog_types() and libbpf_probes.c are expecting for feature probing purpose. Changes from v1: - Remove an unnecessary NULL check in check_struct_ops_btf_id() Reported-by: syzbot+88f0aafe5f950d7489d7@syzkaller.appspotmail.com Closes: https://lore.kernel.org/bpf/00000000000040d68a060fc8db8c@google.com/ Reported-by: syzbot+1336f3d4b10bcda75b89@syzkaller.appspotmail.com Closes: https://lore.kernel.org/bpf/00000000000026353b060fc21c07@google.com/ Fixes: fcc2c1fb ("bpf: pass attached BTF to the bpf_struct_ops subsystem") Signed-off-by:
Kui-Feng Lee <thinker.li@gmail.com> Link: https://lore.kernel.org/r/20240126023113.1379504-1-thinker.li@gmail.comSigned-off-by:
Martin KaFai Lau <martin.lau@kernel.org>
-
Eduard Zingerman authored
I've been working on BPF verifier, BPF selftests and, to some extent, libbpf, for some time. As suggested by Andrii and Alexei, I humbly ask to add me to maintainers list: - As reviewer for BPF [GENERAL] - As maintainer for BPF [LIBRARY] - As maintainer for BPF [SELFTESTS] This patch adds dedicated entries to MAINTAINERS. Signed-off-by:
Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20240126032554.9697-1-eddyz87@gmail.comSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Gerhard Engleder authored
PHY loopback turns off link state change signalling. Therefore, the loopback only works if the link is already up before the PHY loopback is activated. Ensure that PHY loopback works even if the link is not already up during activation by calling netif_carrier_on() explicitly. Signed-off-by:
Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://lore.kernel.org/r/20240123200151.60848-1-gerhard@engleder-embedded.comSigned-off-by:
-
Ankit Garg authored
Previously, each caller of gve_rx_alloc_buffer had to increase counter and as a result one caller was not tracking those failure. Increasing counters at a common location now so callers don't have to duplicate code or miss counter management. Signed-off-by:
Ankit Garg <nktgrg@google.com> Link: https://lore.kernel.org/r/20240124205435.1021490-1-nktgrg@google.comSigned-off-by:
-
Jakub Kicinski authored
David Ahern says: ==================== selftests: Updates to fcnal-test for autoamted environment The first patch updates the PATH for fcnal-test.sh to find the nettest binary when invoked at the top-level directory via make -C tools/testing/selftests TARGETS=net run_tests Second patch fixes a bug setting the ping_group; it has a compound value and that value is not traversing the various helper functions in tact. Fix by creating a helper specific to setting it. Third patch adds more output when a test fails - e.g., to catch a change in the return code of some test. With these 3 patches, the entire suite completes successfully when run on Ubuntu 23.10 with 6.5 kernel - 914 tests pass, 0 fail. ==================== Link: https://lore.kernel.org/r/20240124214117.24687-1-dsahern@kernel.orgSigned-off-by:
-
David Ahern authored
Capture expected and actual return codes for a test that fails in the fcnal-test suite. Signed-off-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240124214117.24687-4-dsahern@kernel.orgSigned-off-by:
-
David Ahern authored
ping_group_range sysctl has a compound value which does not go through the various function layers in tact. Create a helper function to bypass the layers and correctly set the value. Signed-off-by:
-
David Ahern authored
Allow fcnal-test.sh to be run from top level directory in the kernel repo as well as from tools/testing/selftests/net by setting the PATH to find the in-tree nettest. Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-next-2024-01-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.9 The first "new features" pull request for v6.9. We have only driver changes this time and most of them are for Realtek drivers. Really nice to see activity in Broadcom drivers again. Major changes: rtwl8xxxu * RTL8188F: concurrent interface support * Channel Switch Announcement (CSA) support in AP mode brcmfmac * per-vendor feature support * per-vendor SAE password setup rtlwifi * speed up USB firmware initialisation * tag 'wireless-next-2024-01-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (105 commits) wifi: iwlegacy: Use kcalloc() instead of kzalloc() wifi: rtw89: fix disabling concurrent mode TX hang issue wifi: rtw89: fix HW scan timeout due to TSF sync issue wifi: rtw89: add wait/completion for abort scan wifi: rtw89: fix null pointer access when abort scan wifi: rtw89: disable RTS when broadcast/multicast wifi: rtw89: Set default CQM config if not present wifi: rtw89: refine hardware scan C2H events wifi: rtw89: refine add_chan H2C command to encode_bits wifi: rtw89: 8922a: add BTG functions to assist BT coexistence to control TX/RX wifi: rtw89: 8922a: add TX power related ops wifi: rtw89: 8922a: add register definitions of H2C, C2H, page, RRSR and EDCCA wifi: rtw89: 8922a: add chip_ops related to BB init wifi: rtw89: 8922a: add chip_ops::{enable,disable}_bb_rf wifi: rtw89: add mlo_dbcc_mode for WiFi 7 chips wifi: rtlwifi: Speed up firmware loading for USB wifi: rtl8xxxu: add missing number of sec cam entries for all variants wifi: brcmfmac: allow per-vendor event handling wifi: brcmfmac: avoid invalid list operation when vendor attach fails wifi: brcmfmac: Demote vendor-specific attach/detach messages to info ... ==================== Link: https://lore.kernel.org/r/20240125104030.B6CA6C433C7@smtp.kernel.orgSigned-off-by:
-
Arseniy Krasnov authored
SOCK_SEQPACKET is supported for virtio transport, so do not interpret such type of socket as unknown. Signed-off-by:
Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240124193255.3417803-1-avkrasnov@salutedevices.comSigned-off-by:
-
Jakub Kicinski authored
Pedro Tammela says: ==================== selftests: tc-testing: misc changes for tdc Patches 1 and 3 are fixes for tdc that were discovered when running it using defconfig + tc-testing config and against the latest iproute2. Patch 2 improves the taprio tests. Patch 4 enables all tdc tests. Patch 5 fixes the return code of tdc for when a test fails setup/teardown. ==================== Link: https://lore.kernel.org/r/20240124181933.75724-1-pctammela@mojatatu.comSigned-off-by:
-
Pedro Tammela authored
As of today tests throwing exceptions in setup/teardown phase are treated as skipped but they should really be failures. Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Reviewed-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by:
-
Pedro Tammela authored
For the longest time tdc ran only actions and qdiscs tests. It's time to enable all the remaining tests so every user visible piece of TC is tested by the downstream CIs. Signed-off-by:
-
Pedro Tammela authored
Adjust the fq verify regex to the latest iproute2 Signed-off-by:
-
Pedro Tammela authored
If 'jq' is not available the taprio tests might enter an infinite loop, use the "dependsOn" feature from tdc to check if jq is present. If it's not the test is skipped. Suggested-by:
-
Pedro Tammela authored
On a default config + tc-testing config build, tdc will miss all the netfilter related tests because it's missing: CONFIG_NETFILTER=y Signed-off-by:
-
- 25 Jan, 2024 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Cross-merge networking fixes after downstream PR. No conflicts or adjacent changes. Signed-off-by:
-
