- 19 Apr, 2021 40 commits
-
-
Qu Wenruo authored
[BUG] When running btrfs/071 with inode_need_compress() removed from compress_file_range(), we got the following crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Workqueue: btrfs-delalloc btrfs_work_helper [btrfs] RIP: 0010:compress_file_range+0x476/0x7b0 [btrfs] Call Trace: ? submit_compressed_extents+0x450/0x450 [btrfs] async_cow_start+0x16/0x40 [btrfs] btrfs_work_helper+0xf2/0x3e0 [btrfs] process_one_work+0x278/0x5e0 worker_thread+0x55/0x400 ? process_one_work+0x5e0/0x5e0 kthread+0x168/0x190 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x30 ---[ end trace 65faf4eae941fa7d ]--- This is already after the patch "btrfs: inode: fix NULL pointer dereference if inode doesn't need compression." [CAUSE] @pages is firstly created by kcalloc() in compress_file_extent(): pages = kcalloc(nr_pages, sizeof(struct page *), GFP_NOFS); Then passed to btrfs_compress_pages() to be utilized there: ret = btrfs_compress_pages(... pages, &nr_pages, ...); btrfs_compress_pages() will initialize each page as output, in zlib_compress_pages() we have: pages[nr_pages] = out_page; nr_pages++; Normally this is completely fine, but there is a special case which is in btrfs_compress_pages() itself: switch (type) { default: return -E2BIG; } In this case, we didn't modify @pages nor @out_pages, leaving them untouched, then when we cleanup pages, the we can hit NULL pointer dereference again: if (pages) { for (i = 0; i < nr_pages; i++) { WARN_ON(pages[i]->mapping); put_page(pages[i]); } ... } Since pages[i] are all initialized to zero, and btrfs_compress_pages() doesn't change them at all, accessing pages[i]->mapping would lead to NULL pointer dereference. This is not possible for current kernel, as we check inode_need_compress() before doing pages allocation. But if we're going to remove that inode_need_compress() in compress_file_extent(), then it's going to be a problem. [FIX] When btrfs_compress_pages() hits its default case, modify @out_pages to 0 to prevent such problem from happening. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212331 CC: stable@vger.kernel.org # 5.10+ Reviewed-by:Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Johannes Thumshirn authored
For zoned btrfs, zone append is mandatory to write to a sequential write only zone, otherwise parallel writes to the same zone could result in unaligned write errors. If a zoned block device does not support zone append (e.g. a dm-crypt zoned device using a non-NULL IV cypher), fail to mount. CC: stable@vger.kernel.org # 5.12 Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
-
Filipe Manana authored
There is a race between a task aborting a transaction during a commit, a task doing an fsync and the transaction kthread, which leads to an use-after-free of the log root tree. When this happens, it results in a stack trace like the following: BTRFS info (device dm-0): forced readonly BTRFS warning (device dm-0): Skipping commit of aborted transaction. BTRFS: error (device dm-0) in cleanup_transaction:1958: errno=-5 IO failure BTRFS warning (device dm-0): lost page write due to IO error on /dev/mapper/error-test (-5) BTRFS warning (device dm-0): Skipping commit of aborted transaction. BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0xa4e8 len 4096 err no 10 BTRFS error (device dm-0): error writing primary super block to device 1 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e000 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e008 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e010 len 4096 err no 10 BTRFS: error (device dm-0) in write_all_supers:4110: errno=-5 IO failure (1 errors while writing supers) BTRFS: error (device dm-0) in btrfs_sync_log:3308: errno=-5 IO failure general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b68: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 2 PID: 2458471 Comm: fsstress Not tainted 5.12.0-rc5-btrfs-next-84 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:__mutex_lock+0x139/0xa40 Code: c0 74 19 (...) RSP: 0018:ffff9f18830d7b00 EFLAGS: 00010202 RAX: 6b6b6b6b6b6b6b68 RBX: 0000000000000001 RCX: 0000000000000002 RDX: ffffffffb9c54d13 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff9f18830d7bc0 R08: 0000000000000000 R09: 0000000000000000 R10: ffff9f18830d7be0 R11: 0000000000000001 R12: ffff8c6cd199c040 R13: ffff8c6c95821358 R14: 00000000fffffffb R15: ffff8c6cbcf01358 FS: 00007fa9140c2b80(0000) GS:ffff8c6fac600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa913d52000 CR3: 000000013d2b4003 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? __btrfs_handle_fs_error+0xde/0x146 [btrfs] ? btrfs_sync_log+0x7c1/0xf20 [btrfs] ? btrfs_sync_log+0x7c1/0xf20 [btrfs] btrfs_sync_log+0x7c1/0xf20 [btrfs] btrfs_sync_file+0x40c/0x580 [btrfs] do_fsync+0x38/0x70 __x64_sys_fsync+0x10/0x20 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fa9142a55c3 Code: 8b 15 09 (...) RSP: 002b:00007fff26278d48 EFLAGS: 00000246 ORIG_RAX: 000000000000004a RAX: ffffffffffffffda RBX: 0000563c83cb4560 RCX: 00007fa9142a55c3 RDX: 00007fff26278cb0 RSI: 00007fff26278cb0 RDI: 0000000000000005 RBP: 0000000000000005 R08: 0000000000000001 R09: 00007fff26278d5c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000340 R13: 00007fff26278de0 R14: 00007fff26278d96 R15: 0000563c83ca57c0 Modules linked in: btrfs dm_zero dm_snapshot dm_thin_pool (...) ---[ end trace ee2f1b19327d791d ]--- The steps that lead to this crash are the following: 1) We are at transaction N; 2) We have two tasks with a transaction handle attached to transaction N. Task A and Task B. Task B is doing an fsync; 3) Task B is at btrfs_sync_log(), and has saved fs_info->log_root_tree into a local variable named 'log_root_tree' at the top of btrfs_sync_log(). Task B is about to call write_all_supers(), but before that... 4) Task A calls btrfs_commit_transaction(), and after it sets the transaction state to TRANS_STATE_COMMIT_START, an error happens before it waits for the transaction's 'num_writers' counter to reach a value of 1 (no one else attached to the transaction), so it jumps to the label "cleanup_transaction"; 5) Task A then calls cleanup_transaction(), where it aborts the transaction, setting BTRFS_FS_STATE_TRANS_ABORTED on fs_info->fs_state, setting the ->aborted field of the transaction and the handle to an errno value and also setting BTRFS_FS_STATE_ERROR on fs_info->fs_state. After that, at cleanup_transaction(), it deletes the transaction from the list of transactions (fs_info->trans_list), sets the transaction to the state TRANS_STATE_COMMIT_DOING and then waits for the number of writers to go down to 1, as it's currently 2 (1 for task A and 1 for task B); 6) The transaction kthread is running and sees that BTRFS_FS_STATE_ERROR is set in fs_info->fs_state, so it calls btrfs_cleanup_transaction(). There it sees the list fs_info->trans_list is empty, and then proceeds into calling btrfs_drop_all_logs(), which frees the log root tree with a call to btrfs_free_log_root_tree(); 7) Task B calls write_all_supers() and, shortly after, under the label 'out_wake_log_root', it deferences the pointer stored in 'log_root_tree', which was already freed in the previous step by the transaction kthread. This results in a use-after-free leading to a crash. Fix this by deleting the transaction from the list of transactions at cleanup_transaction() only after setting the transaction state to TRANS_STATE_COMMIT_DOING and waiting for all existing tasks that are attached to the transaction to release their transaction handles. This makes the transaction kthread wait for all the tasks attached to the transaction to be done with the transaction before dropping the log roots and doing other cleanups. Fixes: ef67963d ("btrfs: drop logs when we've aborted a transaction") CC: stable@vger.kernel.org # 5.10+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Qu Wenruo authored
The new function, submit_eb_subpage(), will submit all the dirty extent buffers in the page. The major difference between submit_eb_page() and submit_eb_subpage() is: - How to grab extent buffer Now we use find_extent_buffer_nospinlock() other than using page::private. All other different handling is already done in functions like lock_extent_buffer_for_io() and write_one_eb(). Signed-off-by:
-
Qu Wenruo authored
For subpage metadata, we don't use page locking at all. So just skip the page locking part for subpage. The rest of the function can be reused. Signed-off-by:
-
Qu Wenruo authored
The new function, write_one_subpage_eb(), as a subroutine for subpage metadata write, will handle the extent buffer bio submission. The major differences between the new write_one_subpage_eb() and write_one_eb() is: - No page locking When entering write_one_subpage_eb() the page is no longer locked. We only lock the page for its status update, and unlock immediately. Now we completely rely on extent io tree locking. - Extra bitmap update along with page status update Now page dirty and writeback is controlled by btrfs_subpage::dirty_bitmap and btrfs_subpage::writeback_bitmap. They both follow the schema that any sector is dirty/writeback, then the full page gets dirty/writeback. - When to update the nr_written number Now we take a shortcut, if we have cleared the last dirty bit of the page, we update nr_written. This is not completely perfect, but should emulate the old behavior well enough. Signed-off-by:
-
Qu Wenruo authored
The new function, end_bio_subpage_eb_writepage(), will handle the metadata writeback endio. The major differences involved are: - How to grab extent buffer Now page::private is a pointer to btrfs_subpage, we can no longer grab extent buffer directly. Thus we need to use the bv_offset to locate the extent buffer manually and iterate through the whole range. - Use btrfs_subpage_end_writeback() caller This helper will handle the subpage writeback for us. Since this function is executed under endio context, when grabbing extent buffers it can't grab eb->refs_lock as that lock is not designed to be grabbed under hardirq context. So here introduce a helper, find_extent_buffer_nolock(), for such situation, and convert find_extent_buffer() to use that helper. Signed-off-by:
-
Josef Bacik authored
There are a few places where we don't check the return value of btrfs_commit_transaction in relocation.c. Thankfully all these places have straightforward error handling, so simply change all of the sites at once. Reviewed-by:
-
Josef Bacik authored
We have a BUG_ON() if we get an error back from btrfs_get_fs_root(). This honestly should never fail, as at this point we have a solid coordination of fs root to reloc root, and these roots will all be in memory. But in the name of killing BUG_ON()'s remove these and handle the error condition properly, ASSERT()'ing for developers. Signed-off-by:
-
Josef Bacik authored
In corruption cases we could have paths from a block up to no root at all, and thus we'll BUG_ON(!root) in select_one_root. Handle this by adding an ASSERT() for developers, and returning an error for normal users. Signed-off-by:
-
Josef Bacik authored
This probably can't happen even with a corrupt file system, because we would have failed much earlier on than here. However there's no reason we can't just check and bail out as appropriate, so do that and convert the correctness BUG_ON() to an ASSERT(). Reviewed-by:
-
Josef Bacik authored
If we have a duplicate entry for a reloc root then we could have fs corruption that resulted in a double allocation. Since this shouldn't happen unless there is corruption, add an ASSERT(ret != -EEXIST) to all of the callers of __add_reloc_root() to catch any logic mistakes for developers, otherwise normal error handling will happen for normal users. Signed-off-by:
-
Josef Bacik authored
We can already handle errors appropriately from this function, deal with an error coming from __add_reloc_root appropriately. Reviewed-by:
-
Josef Bacik authored
We already handle some errors in this function, and the callers do the correct error handling, so clean up the rest of the function to do the appropriate error handling. There's a little extra work that needs to be done here, as we create the inode item before we create the orphan item. We could potentially add the orphan item, but if we failed to create the inode item we would have to abort the transaction. Instead add a helper to delete the inode item we created in the case that we're unable to look up the inode (this would likely be caused by an ENOMEM), which if it succeeds means we can avoid a transaction abort in this particular error case. Signed-off-by:
-
Josef Bacik authored
These checks are all taken care of for us by the tree checker code: - the flags don't change or are updated consistently - the v0 extent item format is invalid and caught in many other places too Reviewed-by:
-
Josef Bacik authored
We need to validate that a data extent item does not have the FULL_BACKREF flag set on its flags. Reviewed-by:
-
Josef Bacik authored
We can already deal with errors appropriately from do_relocation, simply handle any errors that come from changing the refs at this point cleanly. We have to abort the transaction if we fail here as we've modified metadata at this point. Signed-off-by:
-
Josef Bacik authored
If any of the reference count manipulation stuff fails in replace_path we need to abort the transaction, as we've modified the blocks already. We can simply break at this point and everything will be cleaned up. Reviewed-by:
-
Josef Bacik authored
The search can fail for various reasons, in case of errors there's no cleanup to be done so we can pass the error to the caller, adjusting for the case where the key is not found and search slot returns 1. Reviewed-by:
-
Josef Bacik authored
If we error out COWing the root node when doing a replace_path then we simply unlock and free the buffer and return the error. Reviewed-by:
-
Josef Bacik authored
A few BUG_ON()'s in replace_path are purely to keep us from making logical mistakes, so replace them with ASSERT()'s. Reviewed-by:
-
Josef Bacik authored
We call btrfs_update_root in btrfs_update_reloc_root, which can fail for all sorts of reasons, including IO errors. Instead of panicing the box lets return the error, now that all callers properly handle those errors. Reviewed-by:
-
Josef Bacik authored
btrfs_update_reloc_root will will return errors in the future, so handle an error properly in prepare_to_merge. Signed-off-by:
-
Josef Bacik authored
btrfs_update_reloc_root will will return errors in the future, so handle the error properly in insert_dirty_subvol. Signed-off-by:
-
Josef Bacik authored
This will be able to return errors in the future, so change it to return an error and handle the errors appropriately. Signed-off-by:
-
Josef Bacik authored
btrfs_update_reloc_root will will return errors in the future, so handle the error properly in commit_fs_roots. Reviewed-by:
-
Josef Bacik authored
If we fail to setup a root->reloc_root in a different thread that path will error out, however it still leaves root->reloc_root NULL but would still appear set up in the transaction. Subsequent calls to btrfs_record_root_in_transaction would succeed without attempting to create the reloc root, as the transid has already been updated. Handle this case by making sure we have a root->reloc_root set after a btrfs_record_root_in_transaction call so we don't end up dereferencing a NULL pointer. Reported-by:
Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Signed-off-by:
-
Josef Bacik authored
We do memory allocations here, read blocks from disk, all sorts of operations that could easily fail at any given point. Instead of panicing the box, simply return the error back up the chain, all callers at this point have proper error handling. Signed-off-by:
-
Josef Bacik authored
create_reloc_root will return errors in the future, and __add_reloc_root can return ENOMEM or EEXIST, so handle these errors properly. Signed-off-by:
-
Josef Bacik authored
We can create a reloc root when we record the root in the trans, which can fail for all sorts of different reasons. Propagate this error up the chain of callers. Future patches will fix the callers of btrfs_record_root_in_trans() to handle the error. Reviewed-by:
-
Josef Bacik authored
record_root_in_trans can currently fail, so handle this failure properly. Reviewed-by:
-
Josef Bacik authored
record_root_in_trans can fail currently, handle this failure properly. Signed-off-by:
-
Josef Bacik authored
record_root_in_trans can fail currently, so handle this failure properly. Reviewed-by:
-
Josef Bacik authored
btrfs_record_root_in_trans will return errors in the future, so handle the error properly in start_transaction. Reviewed-by:
-
Josef Bacik authored
btrfs_record_root_in_trans will return errors in the future, so handle the error properly in relocate_tree_block. Reviewed-by:
-
Josef Bacik authored
btrfs_record_root_in_trans will return errors in the future, so handle the error properly in create_subvol. Signed-off-by:
-
Josef Bacik authored
btrfs_record_root_in_trans will return errors in the future, so handle the error properly in btrfs_recover_log_trees. This appears tricky, however we have a reference count on the destination root, so if this fails we need to continue on in the loop to make sure the proper cleanup is done. Reviewed-by:
-
Josef Bacik authored
btrfs_record_root_in_trans will return errors in the future, so handle the error properly in btrfs_delete_subvolume. Reviewed-by:
-
Josef Bacik authored
btrfs_record_root_in_trans will return errors in the future, so handle the error properly in btrfs_rename. Signed-off-by:
-
Josef Bacik authored
btrfs_record_root_in_trans will return errors in the future, so handle the error properly in btrfs_rename_exchange. Reviewed-by:
-
