- 18 Nov, 2019 40 commits
-
-
David Sterba authored
Replace indirect calls to free_workspace by switch and calls to the specific callbacks. This is mainly to get rid of the indirection due to spectre vulnerability mitigations. Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
David Sterba authored
We can infer the workspace_manager from type and the type will be used in the following patch to call a common helper for free_workspace. Reviewed-by:
-
David Sterba authored
Replace indirect calls to alloc_workspace by switch and calls to the specific callbacks. This is mainly to get rid of the indirection due to spectre vulnerability mitigations. Reviewed-by:
-
David Sterba authored
We can infer the workspace_manager from type and the type will be used in the following patch to call a common helper for alloc_workspace. Reviewed-by:
-
David Sterba authored
Similar to get_workspace, majority of the callbacks is trivial, we don't gain anything by the indirection, so replace them by a switch function. Trivial callback implementations use the helper. Reviewed-by:
-
David Sterba authored
Majority of the callbacks is trivial, we don't gain anything by the indirection, so replace them by a switch function. ZLIB needs to adjust level in the callback and ZSTD workspace management is complex, the rest is call to the helper. Reviewed-by:
-
David Sterba authored
The indirect calls will be replaced by a switch in compression.c. (Switch is faster than indirect calls with when Spectre mitigations are enabled). Reviewed-by:
-
David Sterba authored
Replace loop calling to all algos with a list of direct calls to the cleanup manager callback. When that becomes trivial it is replaced by direct call to the helper. Reviewed-by:
-
David Sterba authored
With the access to the workspace structures, we can look it up together with the compression ops inside the workspace manager cleanup helper. Reviewed-by:
-
David Sterba authored
Replace loop calling to all algos with a list of direct calls to the init manager callback. When that becomes trivial it is replaced by direct call to the helper. Reviewed-by:
-
David Sterba authored
With the access to the workspace structures, we can look it up together with the compression ops inside the workspace manager init helper. Reviewed-by:
-
David Sterba authored
There's a lot of indirection when the generic code calls into algo-specific callbacks to reach the private workspace manager structure and back to the generic code. To simplify that, export the workspace manager for heuristic, LZO and ZLIB, while ZSTD is going to use it's own manager. Reviewed-by:
-
David Sterba authored
The indirect calls bring some overhead due to spectre vulnerability mitigations. The number of cases is small and below the threshold (10-20) where indirect call would be better. Reviewed-by:
-
David Sterba authored
Export compress_pages, decompress_bio and decompress callbacks for all compression algos. The indirect calls will be replaced by a switch. Reviewed-by:
-
Josef Bacik authored
When free'ing extents in a block group we check to see if the block group is not cached, and then cache it if we need to. However we'll just carry on as long as we're loading the cache. This is problematic because we are dirtying the block group here. If we are fast enough we could do a transaction commit and clear the free space cache while we're still loading the space cache in another thread. This truncates the free space inode, which will keep it from loading the space cache. Fix this by using the btrfs_block_group_cache_done helper so that we try to load the space cache unconditionally here, which will result in the caller waiting for the fast caching to complete and keep us from truncating the free space inode. CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
-
Josef Bacik authored
While testing 5.2 we ran into the following panic [52238.017028] BUG: kernel NULL pointer dereference, address: 0000000000000001 [52238.105608] RIP: 0010:drop_buffers+0x3d/0x150 [52238.304051] Call Trace: [52238.308958] try_to_free_buffers+0x15b/0x1b0 [52238.317503] shrink_page_list+0x1164/0x1780 [52238.325877] shrink_inactive_list+0x18f/0x3b0 [52238.334596] shrink_node_memcg+0x23e/0x7d0 [52238.342790] ? do_shrink_slab+0x4f/0x290 [52238.350648] shrink_node+0xce/0x4a0 [52238.357628] balance_pgdat+0x2c7/0x510 [52238.365135] kswapd+0x216/0x3e0 [52238.371425] ? wait_woken+0x80/0x80 [52238.378412] ? balance_pgdat+0x510/0x510 [52238.386265] kthread+0x111/0x130 [52238.392727] ? kthread_create_on_node+0x60/0x60 [52238.401782] ret_from_fork+0x1f/0x30 The page we were trying to drop had a page->private, but had no page->mapping and so called drop_buffers, assuming that we had a buffer_head on the page, and then panic'ed trying to deref 1, which is our page->private for data pages. This is happening because we're truncating the free space cache while we're trying to load the free space cache. This isn't supposed to happen, and I'll fix that in a followup patch. However we still shouldn't allow those sort of mistakes to result in messing with pages that do not belong to us. So add the page->mapping check to verify that we still own this page after dropping and re-acquiring the page lock. This page being unlocked as: btrfs_readpage extent_read_full_page __extent_read_full_page __do_readpage if (!nr) unlock_page <-- nr can be 0 only if submit_extent_page returns an error CC: stable@vger.kernel.org # 4.4+ Reviewed-by:Filipe Manana <fdmanana@suse.com> Reviewed-by:
-
Filipe Manana authored
In the fixup worker, if we fail to mark the range as delalloc in the io tree, we must release the previously reserved metadata, as well as update the outstanding extents counter for the inode, otherwise we leak metadata space. In pratice we can't return an error from btrfs_set_extent_delalloc(), which is just a wrapper around __set_extent_bit(), as for most errors __set_extent_bit() does a BUG_ON() (or panics which hits a BUG_ON() as well) and returning an -EEXIST error doesn't happen in this case since the exclusive bits parameter always has a value of 0 through this code path. Nevertheless, just fix the error handling in the fixup worker, in case one day __set_extent_bit() can return an error to this code path. Fixes: f3038ee3 ("btrfs: Handle btrfs_set_extent_delalloc failure in fixup worker") CC: stable@vger.kernel.org # 4.19+ Reviewed-by:
-
Filipe Manana authored
When doing a buffered write it's possible to leave the subv_writers counter of the root, used for synchronization between buffered nocow writers and snapshotting. This happens in an exceptional case like the following: 1) We fail to allocate data space for the write, since there's not enough available data space nor enough unallocated space for allocating a new data block group; 2) Because of that failure, we try to go to NOCOW mode, which succeeds and therefore we set the local variable 'only_release_metadata' to true and set the root's sub_writers counter to 1 through the call to btrfs_start_write_no_snapshotting() made by check_can_nocow(); 3) The call to btrfs_copy_from_user() returns zero, which is very unlikely to happen but not impossible; 4) No pages are copied because btrfs_copy_from_user() returned zero; 5) We call btrfs_end_write_no_snapshotting() which decrements the root's subv_writers counter to 0; 6) We don't set 'only_release_metadata' back to 'false' because we do it only if 'copied', the value returned by btrfs_copy_from_user(), is greater than zero; 7) On the next iteration of the while loop, which processes the same page range, we are now able to allocate data space for the write (we got enough data space released in the meanwhile); 8) After this if we fail at btrfs_delalloc_reserve_metadata(), because now there isn't enough free metadata space, or in some other place further below (prepare_pages(), lock_and_cleanup_extent_if_need(), btrfs_dirty_pages()), we break out of the while loop with 'only_release_metadata' having a value of 'true'; 9) Because 'only_release_metadata' is 'true' we end up decrementing the root's subv_writers counter to -1 (through a call to btrfs_end_write_no_snapshotting()), and we also end up not releasing the data space previously reserved through btrfs_check_data_free_space(). As a consequence the mechanism for synchronizing NOCOW buffered writes with snapshotting gets broken. Fix this by always setting 'only_release_metadata' to false at the start of each iteration. Fixes: 8257b2dc ("Btrfs: introduce btrfs_{start, end}_nocow_write() for each subvolume") Fixes: 7ee9e440 ("Btrfs: check if we can nocow if we don't have data space") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
-
Marcos Paulo de Souza authored
Some functions are doing some unnecessary indirection to reach the btrfs_fs_info struct. Change these functions to receive a btrfs_fs_info struct instead of a *file. Reviewed-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
Marcos Paulo de Souza <mpdesouza@suse.com> Reviewed-by:
-
Anand Jain authored
We don't need int argument bool shall do in free_root_pointers(). And rename the argument as it confused two people. Reviewed-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
-
Chengguang Xu authored
The compression type upper limit constant is the same as the last value and this is confusing. In order to keep coding style consistent, use BTRFS_NR_COMPRESS_TYPES as the total number that follows the idom of 'NR' being one more than the last value. Signed-off-by:
Chengguang Xu <cgxu519@mykernel.net> Reviewed-by:
-
Chengguang Xu authored
Use enum to replace macro definitions of extent types. Signed-off-by:
-
Chengguang Xu authored
DEFINE_HASHTABLE itself has already included initialization code, we don't have to call hash_init() again, so remove it. Signed-off-by:
-
Nikolay Borisov authored
This function is used only during the final phase of freespace cache writeout. This is necessary since using the plain btrfs_join_transaction api is deadlock prone. The deadlock looks like: T1: btrfs_commit_transaction commit_cowonly_roots btrfs_write_dirty_block_groups btrfs_wait_cache_io __btrfs_wait_cache_io btrfs_wait_ordered_range <-- Triggers ordered IO for freespace inode and blocks transaction commit until freespace cache writeout T2: <-- after T1 has triggered the writeout finish_ordered_fn btrfs_finish_ordered_io btrfs_join_transaction <--- this would block waiting for current transaction to commit, but since trans commit is waiting for this writeout to finish The special purpose functions prevents it by simply skipping the "wait for writeout" since it's guaranteed the transaction won't proceed until we are done. Reviewed-by: -
Nikolay Borisov authored
Using an ASSERT in btrfs_pin_extent allows to more stringently observe whether the function is called under a transaction or not. Reviewed-by:
-
David Sterba authored
The helper is trivial and we can understand what the atomic_inc on something named refs does. Reviewed-by:
-
Tejun Heo authored
During a cyclic writeback, extent_write_cache_pages() uses done_index to update the writeback_index after the current run is over. However, instead of current index + 1, it gets to to the current index itself. Unfortunately, this, combined with returning on EOF instead of looping back, can lead to the following pathlogical behavior. 1. There is a single file which has accumulated enough dirty pages to trigger balance_dirty_pages() and the writer appending to the file with a series of short writes. 2. balance_dirty_pages kicks in, wakes up background writeback and sleeps. 3. Writeback kicks in and the cursor is on the last page of the dirty file. Writeback is started or skipped if already in progress. As it's EOF, extent_write_cache_pages() returns and the cursor is set to done_index which is pointing to the last page. 4. Writeback is done. Nothing happens till balance_dirty_pages finishes, at which point we go back to #1. This can almost completely stall out writing back of the file and keep the system over dirty threshold for a long time which can mess up the whole system. We encountered this issue in production with a package handling application which can reliably reproduce the issue when running under tight memory limits. Reading the comment in the error handling section, this seems to be to avoid accidentally skipping a page in case the write attempt on the page doesn't succeed. However, this concern seems bogus. On each page, the code either: * Skips and moves onto the next page. * Fails issue and sets done_index to index + 1. * Successfully issues and continue to the next page if budget allows and not EOF. IOW, as long as it's not EOF and there's budget, the code never retries writing back the same page. Only when a page happens to be the last page of a particular run, we end up retrying the page, which can't possibly guarantee anything data integrity related. Besides, cyclic writes are only used for non-syncing writebacks meaning that there's no data integrity implication to begin with. Fix it by always setting done_index past the current page being processed. Note that this problem exists in other writepages too. CC: stable@vger.kernel.org # 4.19+ Signed-off-by:
Tejun Heo <tj@kernel.org> Reviewed-by:
-
Marcos Paulo de Souza authored
Commit 4617ea3a (" Btrfs: fix necessary chunk tree space calculation when allocating a chunk") removed the is_allocation argument from check_system_chunk, since the formula for reserving the necessary space for allocation or removing a chunk would be the same. So, rework the comment by removing the mention of is_allocation argument. Signed-off-by:
Marcos Paulo de Souza <marcos.souza.org@gmail.com> Reviewed-by:
-
Qu Wenruo authored
Unlike read time tree checker errors, write time error can't be inspected by "btrfs inspect dump-tree", so we need extra information to determine what's going wrong. The patch will add the following output for write time tree checker error: - The content of the offending tree block To help determining if it's a false alert. - Kernel WARN_ON() for debug build This is helpful for us to detect unexpected write time tree checker error, especially fstests could catch the dmesg. Since the WARN_ON() is only triggered for write time tree checker, test cases utilizing dm-error won't trigger this WARN_ON(), thus no extra noise. Signed-off-by:
-
Qu Wenruo authored
Refactor the check for prev_key->objectid of the following key types into one function, check_prev_ino(): - EXTENT_DATA - INODE_REF - DIR_INDEX - DIR_ITEM - XATTR_ITEM Also add the check of prev_key for INODE_REF. Signed-off-by:
-
Chris Mason authored
extent_write_locked_range() is used when we're falling back to buffered IO from inside of compression. It allocates its own wbc and should associate it with the inode's i_wb to make sure the IO goes down from the correct cgroup. Reviewed-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Chris Mason authored
Async CRCs and compression submit IO through helper threads, which means they have IO priority inversions when cgroup IO controllers are in use. This flags all of the writes submitted by btrfs helper threads as REQ_CGROUP_PUNT. submit_bio() will punt these to dedicated per-blkcg work items to avoid the priority inversion. For the compression code, we take a reference on the wbc's blkg css and pass it down to the async workers. For the async CRCs, the bio already has the correct css, we just need to tell the block layer to use REQ_CGROUP_PUNT. Reviewed-by:
-
Chris Mason authored
The btrfs writepages function collects a large range of pages flagged for delayed allocation, and then sends them down through the COW code for processing. When compression is on, we allocate one async_chunk structure for every 512K, and then run those pages through the compression code for IO submission. writepages starts all of this off with a single page, locked by the original call to extent_write_cache_pages(), and it's important to keep track of this page because it has already been through clear_page_dirty_for_io(). The btrfs async_chunk struct has a pointer to the locked_page, and when we're redirtying the page because compression had to fallback to uncompressed IO, we use page->index to decide if a given async_chunk struct really owns that page. But, this is racey. If a given delalloc range is broken up into two async_chunks (chunkA and chunkB), we can end up with something like this: compress_file_range(chunkA) submit_compress_extents(chunkA) submit compressed bios(chunkA) put_page(locked_page) compress_file_range(chunkB) ... Or: async_cow_submit submit_compressed_extents <--- falls back to buffered writeout cow_file_range extent_clear_unlock_delalloc __process_pages_contig put_page(locked_pages) async_cow_submit The end result is that chunkA is completed and cleaned up before chunkB even starts processing. This means we can free locked_page() and reuse it elsewhere. If we get really lucky, it'll have the same page->index in its new home as it did before. While we're processing chunkB, we might decide we need to fall back to uncompressed IO, and so compress_file_range() will call __set_page_dirty_nobufers() on chunkB->locked_page. Without cgroups in use, this creates as a phantom dirty page, which isn't great but isn't the end of the world. What can happen, it can go through the fixup worker and the whole COW machinery again: in submit_compressed_extents(): while (async extents) { ... cow_file_range if (!page_started ...) extent_write_locked_range else if (...) unlock_page continue; This hasn't been observed in practice but is still possible. With cgroups in use, we might crash in the accounting code because page->mapping->i_wb isn't set. BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0 IP: percpu_counter_add_batch+0x11/0x70 PGD 66534e067 P4D 66534e067 PUD 66534f067 PMD 0 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 16 PID: 2172 Comm: rm Not tainted RIP: 0010:percpu_counter_add_batch+0x11/0x70 RSP: 0018:ffffc9000a97bbe0 EFLAGS: 00010286 RAX: 0000000000000005 RBX: 0000000000000090 RCX: 0000000000026115 RDX: 0000000000000030 RSI: ffffffffffffffff RDI: 0000000000000090 RBP: 0000000000000000 R08: fffffffffffffff5 R09: 0000000000000000 R10: 00000000000260c0 R11: ffff881037fc26c0 R12: ffffffffffffffff R13: ffff880fe4111548 R14: ffffc9000a97bc90 R15: 0000000000000001 FS: 00007f5503ced480(0000) GS:ffff880ff7200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000d0 CR3: 00000001e0459005 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: account_page_cleaned+0x15b/0x1f0 __cancel_dirty_page+0x146/0x200 truncate_cleanup_page+0x92/0xb0 truncate_inode_pages_range+0x202/0x7d0 btrfs_evict_inode+0x92/0x5a0 evict+0xc1/0x190 do_unlinkat+0x176/0x280 do_syscall_64+0x63/0x1a0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 The fix here is to make asyc_chunk->locked_page NULL everywhere but the one async_chunk struct that's allowed to do things to the locked page. Link: https://lore.kernel.org/linux-btrfs/c2419d01-5c84-3fb4-189e-4db519d08796@suse.com/ Fixes: 771ed689 ("Btrfs: Optimize compressed writeback and reads") Reviewed-by: -
Chris Mason authored
Now that we're not using btrfs_schedule_bio() anymore, delete all the code that supported it. Reviewed-by:
-
Chris Mason authored
btrfs_schedule_bio() hands IO off to a helper thread to do the actual submit_bio() call. This has been used to make sure async crc and compression helpers don't get stuck on IO submission. To maintain good performance, over time the IO submission threads duplicated some IO scheduler characteristics such as high and low priority IOs and they also made some ugly assumptions about request allocation batch sizes. All of this cost at least one extra context switch during IO submission, and doesn't fit well with the modern blkmq IO stack. So, this commit stops using btrfs_schedule_bio(). We may need to adjust the number of async helper threads for crcs and compression, but long term it's a better path. Reviewed-by:
-
David Sterba authored
The attribute is more relaxed than const and the functions could dereference pointers, as long as the observable state is not changed. We do have such functions, based on -Wsuggest-attribute=pure . The visible effects of this patch are negligible, there are differences in the assembly but hard to summarize. Reviewed-by:
-
David Sterba authored
For some reason the attribute is called __attribute_const__ and not __const, marks functions that have no observable effects on program state, IOW not reading pointers, just the arguments and calculating a value. Allows the compiler to do some optimizations, based on -Wsuggest-attribute=const . The effects are rather small, though, about 60 bytes decrese of btrfs.ko. Reviewed-by:
-
David Sterba authored
The attribute can mark functions supposed to be called rarely if at all and the text can be moved to sections far from the other code. The attribute has been added to several functions already, this patch is based on hints given by gcc -Wsuggest-attribute=cold. The net effect of this patch is decrease of btrfs.ko by 1000-1300, depending on the config options. Reviewed-by:
-
David Sterba authored
The parameter is now always set to NULL and could be dropped. The last user was get_default_root but that got reworked in 05dbe683 ("Btrfs: unify subvol= and subvolid= mounting") and the parameter became unused. Reviewed-by:
-
Josef Bacik authored
We hit the following warning while running down a different problem [ 6197.175850] ------------[ cut here ]------------ [ 6197.185082] refcount_t: underflow; use-after-free. [ 6197.194704] WARNING: CPU: 47 PID: 966 at lib/refcount.c:190 refcount_sub_and_test_checked+0x53/0x60 [ 6197.521792] Call Trace: [ 6197.526687] __btrfs_release_delayed_node+0x76/0x1c0 [ 6197.536615] btrfs_kill_all_delayed_nodes+0xec/0x130 [ 6197.546532] ? __btrfs_btree_balance_dirty+0x60/0x60 [ 6197.556482] btrfs_clean_one_deleted_snapshot+0x71/0xd0 [ 6197.566910] cleaner_kthread+0xfa/0x120 [ 6197.574573] kthread+0x111/0x130 [ 6197.581022] ? kthread_create_on_node+0x60/0x60 [ 6197.590086] ret_from_fork+0x1f/0x30 [ 6197.597228] ---[ end trace 424bb7ae00509f56 ]--- This is because the free side drops the ref without the lock, and then takes the lock if our refcount is 0. So you can have nodes on the tree that have a refcount of 0. Fix this by zero'ing out that element in our temporary array so we don't try to kill it again. CC: stable@vger.kernel.org # 4.14+ Reviewed-by:
-
