- 23 Feb, 2018 4 commits
-
-
Laurent Pinchart authored
Replace the uint_{8,16,32} types with the corresponding native kernel types u{8,16,32}. Signed-off-by:Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Laurent Pinchart authored
The extern keyword isn't needed to declare functions in header files. Drop it. Signed-off-by:
-
Philipp Zabel authored
The Microsoft HoloLens Sensors device has two separate frame descriptors with the same dimensions, each with a single different frame interval: VideoStreaming Interface Descriptor: bLength 30 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 1 bmCapabilities 0x00 Still image unsupported wWidth 1280 wHeight 481 dwMinBitRate 147763200 dwMaxBitRate 147763200 dwMaxVideoFrameBufferSize 615680 dwDefaultFrameInterval 333333 bFrameIntervalType 1 dwFrameInterval( 0) 333333 VideoStreaming Interface Descriptor: bLength 30 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 2 bmCapabilities 0x00 Still image unsupported wWidth 1280 wHeight 481 dwMinBitRate 443289600 dwMaxBitRate 443289600 dwMaxVideoFrameBufferSize 615680 dwDefaultFrameInterval 111111 bFrameIntervalType 1 dwFrameInterval( 0) 111111 Skip duplicate dimensions in enum_framesizes, let enum_frameintervals list the intervals from both frame descriptors. Change set_streamparm to switch to the correct frame index when changing the interval. This enables 90 fps capture on a Lenovo Explorer Windows Mixed Reality headset. [laurent.pinchart@ideasonboard.com: Renamed tmp_ival to ival] Signed-off-by:Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by:
-
Edgar Thier authored
Use flags the device exposes for UVC controls. This allows the device to define which property flags are set. Since some cameras offer auto-adjustments for properties (e.g. auto-gain), the values of other properties (e.g. gain) can change in the camera. Examining the flags ensures that the driver is aware of such properties. Signed-off-by:
Edgar Thier <info@edgarthier.net> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
- 22 Feb, 2018 17 commits
-
-
Mauro Carvalho Chehab authored
1 warning regressions: + drivers/media/i2c/tda1997x.c: warning: variable 'last_irq_status' set but not used [-Wunused-but-set-variable]: => 1421:17 Signed-off-by: -
Tim Harvey authored
Add support for the TDA1997x HDMI receivers. Signed-off-by:
Tim Harvey <tharvey@gateworks.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: fix type 'testin' -> 'testing'] Signed-off-by:
-
Tim Harvey authored
Define the device tree bindings for the TDA1997X. Acked-by:
Rob Herring <robh@kernel.org> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Tim Harvey authored
Add new MAINTAINERS entry. Signed-off-by:
-
Tim Harvey authored
Add a new media entity function definition for digital TV decoders: MEDIA_ENT_F_DTV_DECODER Signed-off-by:
-
Tim Harvey authored
The pad field was inadvertently cleared. Fix this. It's needed for subdevs. Signed-off-by:
-
Hans Verkuil authored
Add the v4l2_hdmi_colorimetry() function so we have a single function that determines the colorspace, YCbCr encoding, quantization range and transfer function from the InfoFrame data. Signed-off-by:
-
Hans Verkuil authored
The specification mentions that type can be V4L2_BUF_TYPE_VIDEO_CAPTURE, but the v4l2 core implementation also allows the _MPLANE variant. Document this. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Acked-by:
-
Sakari Ailus authored
The s_parm and g_parm did nothing. Remove them. Signed-off-by:
-
Sakari Ailus authored
The s_parm callback in mt9m114 driver did nothing, remove it. Signed-off-by:
-
Sakari Ailus authored
These drivers already support g_frame_interval. Therefore just dropping g_parm is enough. Signed-off-by:
-
Sakari Ailus authored
These sensor drivers have use case specific mode lists. This is currently not used nor there is a standard API for selecting the mode list. Disable configurations for non-preview modes until configuration selection is improved so that all the configurations are always usable. Signed-off-by:
-
Sakari Ailus authored
Remove sensor driver's interface for setting the use case specific mode list as well as the mode lists that are related to other than CI_MODE_PREVIEW. This removes s_parm abuse in using driver specific values in v4l2_streamparm.capture.capturemode. The drivers already support [gs]_frame_interval so removing support for [gs]_parm is enough. Signed-off-by:
-
Hans Verkuil authored
Convert all g/s_parm calls to g/s_frame_interval. This allows us to remove the g/s_parm ops since those are a duplicate of g/s_frame_interval. Signed-off-by:
-
Hans Verkuil authored
Create helpers to handle VIDIOC_G/S_PARM by querying the g/s_frame_interval v4l2_subdev ops. Signed-off-by:
-
Hans Verkuil authored
Clear the reserved fields for these ioctls according to the specification: VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL VIDIOC_SUBDEV_ENUM_FRAME_SIZE VIDIOC_SUBDEV_ENUM_MBUS_CODE VIDIOC_SUBDEV_G_CROP, VIDIOC_SUBDEV_S_CROP VIDIOC_SUBDEV_G_FMT, VIDIOC_SUBDEV_S_FMT VIDIOC_SUBDEV_G_FRAME_INTERVAL, VIDIOC_SUBDEV_S_FRAME_INTERVAL VIDIOC_SUBDEV_G_SELECTION, VIDIOC_SUBDEV_S_SELECTION Found with v4l2-compliance. Signed-off-by:
-
- 14 Feb, 2018 18 commits
-
-
Sean Young authored
The current code gets the start time before copying the IR from userspace (could cause page faults) and encoding IR. This means that the gap calculation could be off. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Sean Young authored
ret is always 0, so remove if statement. Signed-off-by:
-
Sean Young authored
This comment is no longer relevant. Signed-off-by:
-
Sean Young authored
Use dev_dbg() rather than custom debug function. Signed-off-by:
-
Sean Young authored
Use dev_dbg() rather than custom debug function. Signed-off-by:
-
Sean Young authored
Calculate the pulse rather than having a few preset values. Signed-off-by:
Andi Shyti <andi.shyti@samsung.com> Signed-off-by:
-
Alexey Khoroshilov authored
Return code of clk_prepare_enable() is ignored in many places. The patch adds error handling for all of them. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Andi Kleen authored
I usually update my config with make oldconfig and pressing return, trusting that whoever updates Kconfig sets sensible defaults. But my recent kernels ended up with all kinds of IR decoders built in that are not used by anything because they are all marked with default y. default y should only be set for something that prevents booting on common systems, never for some random weirdo driver feature like this. Remove all the "default y" in drivers/media/rc/Kconfig Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Florian Echtler authored
This patch registers four standard control handlers using the corresponding V4L2 framework. Signed-off-by:
Florian Echtler <floe@butterbrot.org> [hans.verkuil@cisco.com: lower-cased 0x0F and 0xF0] Signed-off-by:
-
Florian Echtler authored
These functions provide write access to the internal LCD panel registers which also control the sensor. They can be used to disable the preprocessor, set the illumination brightness, and adjust gain/contrast (which are stored together in one register internally called "vsvideo"). Signed-off-by:
-
Florian Echtler authored
This patch adds parameter definitions and module parameters for the four userspace controls that the SUR40 can currently provide. Signed-off-by:
-
Florian Echtler authored
The SUR40 can recognize specific printed patterns directly in hardware; this information (i.e. the pattern id) is present but currently unused in the blob structure. Signed-off-by:
-
Hans Verkuil authored
Replace the old license information with the corresponding SPDX license for those headers that I authored. Signed-off-by:
-
Hans Verkuil authored
Replace the old license information with the corresponding SPDX license for the remaining media drivers that Cisco authored. Signed-off-by:
-
Hans Verkuil authored
Replace the old license information with the corresponding SPDX license for those drivers Cisco authored. Signed-off-by:
-
Hans Verkuil authored
Replace the old license information with the corresponding SPDX license. Signed-off-by:
-
Hans Verkuil authored
Replace the old license information with the corresponding SPDX license. Signed-off-by:
-
Hans Verkuil authored
Replace the old license information with the corresponding SPDX license. Signed-off-by:
-
- 11 Feb, 2018 1 commit
-
-
Linus Torvalds authored
-
