- 19 May, 2018 1 commit
-
-
Matthew Wilcox authored
I had neglected to increment the error counter when the tests failed, which made the tests noisy when they fail, but not actually return an error code. Link: http://lkml.kernel.org/r/20180509114328.9887-1-mpe@ellerman.id.au Fixes: 3cc78125 ("lib/test_bitmap.c: add optimisation tests") Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Yury Norov <ynorov@caviumnetworks.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <stable@vger.kernel.org> [4.13+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 18 May, 2018 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Just three commits. The two cxl ones are not fixes per se, but they modify code that was added this cycle so that it will work with a recent firmware change. And then a fix for a recent commit that added sleeps in the NVRAM code, which needs to be more careful and not sleep if eg. we're called in the panic() path. Thanks to Nicholas Piggin, Philippe Bergheaud, Christophe Lombard" * tag 'powerpc-4.17-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv: Fix NVRAM sleep in invalid context when crashing cxl: Report the tunneled operations status cxl: Set the PBCQ Tunnel BAR register when enabling capi mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fix from Rafael Wysocki: "Fix an ACPICA regression introduced in this cycle and related to the handling of package objects loaded by the Load and loadTable AML operators that are not initialized properly after recent changes (Bob Moore)" * tag 'acpi-4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Add deferred package support for the Load and loadTable operators
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fix from Rafael Wysocki: "Fix Kconfig dependencies of the armada-37xx cpufreq driver (Miquel Raynal)" * tag 'pm-4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: armada-37xx: driver relies on cpufreq-dt
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some USB driver fixes fro 4.17-rc6. They resolve some reported bugs in the musb driver, the xhci driver, and a number of small fixes for the usbip driver. All of these have been in linux-next with no reported issues" * tag 'usb-4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usbip: usbip_host: fix bad unlock balance during stub_probe() usbip: usbip_host: fix NULL-ptr deref and use-after-free errors usbip: usbip_host: run rebind from exit when module is removed usbip: usbip_host: delete device from busid_table after rebind usbip: usbip_host: refine probe and disconnect debug msgs to be useful usb: musb: fix remote wakeup racing with suspend xhci: Fix USB3 NULL pointer dereference at logical disconnect.
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fix from Jens Axboe: "Single fix this time, from Coly, fixing a failure case when CONFIG_DEBUGFS isn't enabled" * tag 'for-linus-20180518' of git://git.kernel.dk/linux-block: bcache: return 0 from bch_debug_init() if CONFIG_DEBUG_FS=n
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A small collection of fixes accumilated since the merge window, all fairly small and driver specific" * tag 'spi-fix-v4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: bcm2835aux: ensure interrupts are enabled for shared handler spi: bcm-qspi: Always read and set BSPI_MAST_N_BOOT_CTRL spi: bcm-qspi: Avoid setting MSPI_CDRAM_PCS for spi-nor master spi: pxa2xx: Allow 64-bit DMA spi: cadence: Add usleep_range() for cdns_spi_fill_tx_fifo() spi: sh-msiof: Fix bit field overflow writes to TSCR/RSCR spi: imx: Update MODULE_DESCRIPTION to "SPI Controller driver"
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull mtd fixes from Boris Brezillon: "NAND fixes: - Fix read path of the Marvell NAND driver - Make sure we don't pass a u64 to ndelay() CFI fix: - Fix the map_word_andequal() implementation" * tag 'mtd/fixes-for-4.17-rc6' of git://git.infradead.org/linux-mtd: mtd: rawnand: Fix return type of __DIVIDE() when called with 32-bit mtd: rawnand: marvell: Fix read logic for layouts with ->nchunks > 2 mtd: Fix comparison in map_word_andequal()
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Pretty quiet week again: one vmwgfx regression fix, one core buffer overflow fix, one vc4 leak fix and three i915 fixes" * tag 'drm-fixes-for-v4.17-rc6' of git://people.freedesktop.org/~airlied/linux: drm/dumb-buffers: Integer overflow in drm_mode_create_ioctl() drm/i915/gen9: Add WaClearHIZ_WM_CHICKEN3 for bxt and glk drm/vmwgfx: Set dmabuf_size when vmw_dmabuf_init is successful drm/vc4: Fix leak of the file_priv that stored the perfmon. drm/i915/execlists: Use rmb() to order CSB reads drm/i915/userptr: reject zero user_size drm: Match sysfs name in link removal to link creation
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2018-05-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Userptr IOCTL zero size check (Matt) - Two hardware quirk fixes (Michel & Chris) * tag 'drm-intel-fixes-2018-05-17' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915/gen9: Add WaClearHIZ_WM_CHICKEN3 for bxt and glk drm/i915/execlists: Use rmb() to order CSB reads drm/i915/userptr: reject zero user_size
-
- 17 May, 2018 11 commits
-
-
Linus Torvalds authored
Merge tag 'hwmon-for-linus-v4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Two k10temp fixes: - fix race condition when accessing System Management Network registers - fix reading critical temperatures on F15h M60h and M70h Also add PCI ID's for the AMD Raven Ridge root bridge" * tag 'hwmon-for-linus-v4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (k10temp) Use API function to access System Management Network x86/amd_nb: Add support for Raven Ridge CPUs hwmon: (k10temp) Fix reading critical temperature register
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: - ARM/ARM64 locking fixes - x86 fixes: PCID, UMIP, locking - improved support for recent Windows version that have a 2048 Hz APIC timer - rename KVM_HINTS_DEDICATED CPUID bit to KVM_HINTS_REALTIME - better behaved selftests * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: rename KVM_HINTS_DEDICATED to KVM_HINTS_REALTIME KVM: arm/arm64: VGIC/ITS save/restore: protect kvm_read_guest() calls KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock KVM: arm/arm64: VGIC/ITS: Promote irq_lock() in update_affinity KVM: arm/arm64: Properly protect VGIC locks from IRQs KVM: X86: Lower the default timer frequency limit to 200us KVM: vmx: update sec exec controls for UMIP iff emulating UMIP kvm: x86: Suppress CR3_PCID_INVD bit only when PCIDs are enabled KVM: selftests: exit with 0 status code when tests cannot be run KVM: hyperv: idr_find needs RCU protection x86: Delay skip of emulated hypercall instruction KVM: Extend MAX_IRQ_ROUTES to 4096 for all archs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "We have a core fix in the compat code for covering a potential race (double references), but it's a very minor change. The rest are all small device-specific quirks, as well as a correction of the new UAC3 support code" * tag 'sound-4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Use Class Specific EP for UAC3 devices. ALSA: hda/realtek - Clevo P950ER ALC1220 Fixup ALSA: usb: mixer: volume quirk for CM102-A+/102S+ ALSA: hda: Add Lenovo C50 All in one to the power_save blacklist ALSA: control: fix a redundant-copy issue
-
Michael S. Tsirkin authored
KVM_HINTS_DEDICATED seems to be somewhat confusing: Guest doesn't really care whether it's the only task running on a host CPU as long as it's not preempted. And there are more reasons for Guest to be preempted than host CPU sharing, for example, with memory overcommit it can get preempted on a memory access, post copy migration can cause preemption, etc. Let's call it KVM_HINTS_REALTIME which seems to better match what guests expect. Also, the flag most be set on all vCPUs - current guests assume this. Note so in the documentation. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: - a fix for the vfio ccw translation code - update an incorrect email address in the MAINTAINERS file - fix a division by zero oops in the cpum_sf code found by trinity - two fixes for the error handling of the qdio code - several spectre related patches to convert all left-over indirect branches in the kernel to expoline branches - update defconfigs to avoid warnings due to the netfilter Kconfig changes - avoid several compiler warnings in the kexec_file code for s390 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/qdio: don't release memory in qdio_setup_irq() s390/qdio: fix access to uninitialized qdio_q fields s390/cpum_sf: ensure sample frequency of perf event attributes is non-zero s390: use expoline thunks in the BPF JIT s390: extend expoline to BC instructions s390: remove indirect branch from do_softirq_own_stack s390: move spectre sysfs attribute code s390/kernel: use expoline for indirect branches s390/ftrace: use expoline for indirect branches s390/lib: use expoline for indirect branches s390/crc32-vx: use expoline for indirect branches s390: move expoline assembler macros to a header vfio: ccw: fix cleanup if cp_prefetch fails s390/kexec_file: add declaration of purgatory related globals s390: update defconfigs MAINTAINERS: update s390 zcrypt maintainers email address
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinuxLinus Torvalds authored
Pull SELinux fixes from Paul Moore: "A small pull request to fix a few regressions in the SELinux/SCTP code with applications that call bind() with AF_UNSPEC/INADDR_ANY. The individual commit descriptions have more information, but the commits themselves should be self explanatory" * tag 'selinux-pr-20180516' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: correctly handle sa_family cases in selinux_sctp_bind_connect() selinux: fix address family in bind() and connect() to match address/port selinux: add AF_UNSPEC and INADDR_ANY checks to selinux_socket_bind()
-
Willy Tarreau authored
proc_pid_cmdline_read() and environ_read() directly access the target process' VM to retrieve the command line and environment. If this process remaps these areas onto a file via mmap(), the requesting process may experience various issues such as extra delays if the underlying device is slow to respond. Let's simply refuse to access file-backed areas in these functions. For this we add a new FOLL_ANON gup flag that is passed to all calls to access_remote_vm(). The code already takes care of such failures (including unmapped areas). Accesses via /proc/pid/mem were not changed though. This was assigned CVE-2018-1120. Note for stable backports: the patch may apply to kernels prior to 4.11 but silently miss one location; it must be checked that no call to access_remote_vm() keeps zero as the last argument. Reported-by: Qualys Security Advisory <qsa@qualys.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Coly Li authored
Commit 539d39eb ("bcache: fix wrong return value in bch_debug_init()") returns the return value of debugfs_create_dir() to bcache_init(). When CONFIG_DEBUG_FS=n, bch_debug_init() always returns 1 and makes bcache_init() failedi. This patch makes bch_debug_init() always returns 0 if CONFIG_DEBUG_FS=n, so bcache can continue to work for the kernels which don't have debugfs enanbled. Changelog: v4: Add Acked-by from Kent Overstreet. v3: Use IS_ENABLED(CONFIG_DEBUG_FS) to replace #ifdef DEBUG_FS. v2: Remove a warning information v1: Initial version. Fixes: Commit 539d39eb ("bcache: fix wrong return value in bch_debug_init()") Cc: stable@vger.kernel.org Signed-off-by: Coly Li <colyli@suse.de> Reported-by: Massimo B. <massimo.b@gmx.net> Reported-by: Kai Krakow <kai@kaishome.de> Tested-by: Kai Krakow <kai@kaishome.de> Acked-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Nicholas Piggin authored
Similarly to opal_event_shutdown, opal_nvram_write can be called in the crash path with irqs disabled. Special case the delay to avoid sleeping in invalid context. Fixes: 3b807033 ("powerpc/powernv: Fix OPAL NVRAM driver OPAL_BUSY loops") Cc: stable@vger.kernel.org # v3.2 Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
A single fix for a recent regression. * 'vmwgfx-fixes-4.17' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Set dmabuf_size when vmw_dmabuf_init is successful
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
- core: Fix regression in dev node offsets (Haneen) - vc4: Fix memory leak on driver close (Eric) - dumb-buffers: Prevent overflow in DIV_ROUND_UP() (Dan) Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Dan Carpenter <dan.carpenter@oracle.com> * tag 'drm-misc-fixes-2018-05-16' of git://anongit.freedesktop.org/drm/drm-misc: drm/dumb-buffers: Integer overflow in drm_mode_create_ioctl() drm/vc4: Fix leak of the file_priv that stored the perfmon. drm: Match sysfs name in link removal to link creation
-
- 16 May, 2018 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fix from Steven Rostedt: "Some of the ftrace internal events use a zero for a data size of a field event. This is increasingly important for the histogram trigger work that is being extended. While auditing trace events, I found that a couple of the xen events were used as just marking that a function was called, by creating a static array of size zero. This can play havoc with the tracing features if these events are used, because a zero size of a static array is denoted as a special nul terminated dynamic array (this is what the trace_marker code uses). But since the xen events have no size, they are not nul terminated, and unexpected results may occur. As trace events were never intended on being a marker to denote that a function was hit or not, especially since function tracing and kprobes can trivially do the same, the best course of action is to simply remove these events" * tag 'trace-v4.17-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/x86/xen: Remove zero data size trace events trace_xen_mmu_flush_tlb{_all}
-
Linus Torvalds authored
Merge tag 'trace-v4.17-rc5-vsprintf' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull memory barrier for from Steven Rostedt: "The memory barrier usage in updating the random ptr hash for %p in vsprintf is incorrect. Instead of adding the read memory barrier into vsprintf() which will cause a slight degradation to a commonly used function in the kernel just to solve a very unlikely race condition that can only happen at boot up, change the code from using a variable branch to a static_branch. Not only does this solve the race condition, it actually will improve the performance of vsprintf() by removing the conditional branch that is only needed at boot" * tag 'trace-v4.17-rc5-vsprintf' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: vsprintf: Replace memory barrier with static_key for random_ptr_key update
-
Shuah Khan (Samsung OSG) authored
stub_probe() calls put_busid_priv() in an error path when device isn't found in the busid_table. Fix it by making put_busid_priv() safe to be called with null struct bus_id_priv pointer. This problem happens when "usbip bind" is run without loading usbip_host driver and then running modprobe. The first failed bind attempt unbinds the device from the original driver and when usbip_host is modprobed, stub_probe() runs and doesn't find the device in its busid table and calls put_busid_priv(0 with null bus_id_priv pointer. usbip-host 3-10.2: 3-10.2 is not in match_busid table... skip! [ 367.359679] ===================================== [ 367.359681] WARNING: bad unlock balance detected! [ 367.359683] 4.17.0-rc4+ #5 Not tainted [ 367.359685] ------------------------------------- [ 367.359688] modprobe/2768 is trying to release lock ( [ 367.359689] ================================================================== [ 367.359696] BUG: KASAN: null-ptr-deref in print_unlock_imbalance_bug+0x99/0x110 [ 367.359699] Read of size 8 at addr 0000000000000058 by task modprobe/2768 [ 367.359705] CPU: 4 PID: 2768 Comm: modprobe Not tainted 4.17.0-rc4+ #5 Fixes: 22076557 ("usbip: usbip_host: fix NULL-ptr deref and use-after-free errors") in usb-linus Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
There is a comment here which says that DIV_ROUND_UP() and that's where the problem comes from. Say you pick: args->bpp = UINT_MAX - 7; args->width = 4; args->height = 1; The integer overflow in DIV_ROUND_UP() means "cpp" is UINT_MAX / 8 and because of how we picked args->width that means cpp < UINT_MAX / 4. I've fixed it by preventing the integer overflow in DIV_ROUND_UP(). I removed the check for !cpp because it's not possible after this change. I also changed all the 0xffffffffU references to U32_MAX. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180516140026.GA19340@mwanda
-
Steven Rostedt (VMware) authored
Reviewing Tobin's patches for getting pointers out early before entropy has been established, I noticed that there's a lone smp_mb() in the code. As with most lone memory barriers, this one appears to be incorrectly used. We currently basically have this: get_random_bytes(&ptr_key, sizeof(ptr_key)); /* * have_filled_random_ptr_key==true is dependent on get_random_bytes(). * ptr_to_id() needs to see have_filled_random_ptr_key==true * after get_random_bytes() returns. */ smp_mb(); WRITE_ONCE(have_filled_random_ptr_key, true); And later we have: if (unlikely(!have_filled_random_ptr_key)) return string(buf, end, "(ptrval)", spec); /* Missing memory barrier here. */ hashval = (unsigned long)siphash_1u64((u64)ptr, &ptr_key); As the CPU can perform speculative loads, we could have a situation with the following: CPU0 CPU1 ---- ---- load ptr_key = 0 store ptr_key = random smp_mb() store have_filled_random_ptr_key load have_filled_random_ptr_key = true BAD BAD BAD! (you're so bad!) Because nothing prevents CPU1 from loading ptr_key before loading have_filled_random_ptr_key. But this race is very unlikely, but we can't keep an incorrect smp_mb() in place. Instead, replace the have_filled_random_ptr_key with a static_branch not_filled_random_ptr_key, that is initialized to true and changed to false when we get enough entropy. If the update happens in early boot, the static_key is updated immediately, otherwise it will have to wait till entropy is filled and this happens in an interrupt handler which can't enable a static_key, as that requires a preemptible context. In that case, a work_queue is used to enable it, as entropy already took too long to establish in the first place waiting a little more shouldn't hurt anything. The benefit of using the static key is that the unlikely branch in vsprintf() now becomes a nop. Link: http://lkml.kernel.org/r/20180515100558.21df515e@gandalf.local.home Cc: stable@vger.kernel.org Fixes: ad67b74d ("printk: hash addresses printed with %p") Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Michel Thierry authored
Factor in clear values wherever required while updating destination min/max. References: HSDES#1604444184 Signed-off-by: Michel Thierry <michel.thierry@intel.com> Cc: mesa-dev@lists.freedesktop.org Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180510200708.18097-1-michel.thierry@intel.com Cc: stable@vger.kernel.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180514165445.9198-1-michel.thierry@intel.com (backported from commit 0c79f9cb) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Deepak Rawat authored
SOU primary plane prepare_fb hook depends upon dmabuf_size to pin up BO (and not call a new vmw_dmabuf_init) when a new fb size is same as current fb. This was changed in a recent commit which is causing page_flip to fail on VM with low display memory and multi-mon failure when cycle monitors from secondary display. Cc: <stable@vger.kernel.org> # 4.14, 4.16 Fixes: 20fb5a63 ("drm/vmwgfx: Unpin the screen object backup buffer when not used") Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
-
- 15 May, 2018 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsLinus Torvalds authored
Pull AFS fixes from David Howells: "Here's a set of patches that fix a number of bugs in the in-kernel AFS client, including: - Fix directory locking to not use individual page locks for directory reading/scanning but rather to use a semaphore on the afs_vnode struct as the directory contents must be read in a single blob and data from different reads must not be mixed as the entire contents may be shuffled about between reads. - Fix address list parsing to handle port specifiers correctly. - Only give up callback records on a server if we actually talked to that server (we might not be able to access a server). - Fix some callback handling bugs, including refcounting, whole-volume callbacks and when callbacks actually get broken in response to a CB.CallBack op. - Fix some server/address rotation bugs, including giving up if we can't probe a server; giving up if a server says it doesn't have a volume, but there are more servers to try. - Fix the decoding of fetched statuses to be OpenAFS compatible. - Fix the handling of server lookups in Cache Manager ops (such as CB.InitCallBackState3) to use a UUID if possible and to handle no server being found. - Fix a bug in server lookup where not all addresses are compared. - Fix the non-encryption of calls that prevents some servers from being accessed (this also requires an AF_RXRPC patch that has already gone in through the net tree). There's also a patch that adds tracepoints to log Cache Manager ops that don't find a matching server, either by UUID or by address" * tag 'afs-fixes-20180514' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Fix the non-encryption of calls afs: Fix CB.CallBack handling afs: Fix whole-volume callback handling afs: Fix afs_find_server search loop afs: Fix the handling of an unfound server in CM operations afs: Add a tracepoint to record callbacks from unlisted servers afs: Fix the handling of CB.InitCallBackState3 to find the server by UUID afs: Fix VNOVOL handling in address rotation afs: Fix AFSFetchStatus decoder to provide OpenAFS compatibility afs: Fix server rotation's handling of fileserver probe failure afs: Fix refcounting in callback registration afs: Fix giving up callbacks on server destruction afs: Fix address list parsing afs: Fix directory page locking
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Two small driver fixes: aacraid to fix an unknown IU type on task management functions which causes a firmware fault and vmw_pvscsi to change a return code to retry the operation instead of causing an immediate error" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: aacraid: Correct hba_send to include iu_type scsi: vmw-pvscsi: return DID_BUS_BUSY for adapter-initated aborts
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fix from Dave Airlie: "This fixes the mmap regression reported to me on irc by an i686 kernel user today, he's tested the fix works, and I've audited all the drm drivers for the bad mmap usage and since we use the mmap offset as a lookup in a table we aren't inclined to have anything bad in there" [ See commit be83bbf8 ("mmap: introduce sane default mmap limits") for details and the note on why the GPU drivers were expected to be a special case. - Linus ] * tag 'drm-fixes-for-v4.17-rc6-urgent' of git://people.freedesktop.org/~airlied/linux: drm: set FMODE_UNSIGNED_OFFSET for drm files
-
Geert Uytterhoeven authored
The __DIVIDE() macro checks whether it is called with a 32-bit or 64-bit dividend, to select the appropriate divide-and-round-up routine. As the check uses the ternary operator, the result will always be promoted to a type that can hold both results, i.e. unsigned long long. When using this result in a division on a 32-bit system, this may lead to link errors like: ERROR: "__udivdi3" [drivers/mtd/nand/raw/nand.ko] undefined! Fix this by casting the result of the division to the type of the dividend. Fixes: 8878b126 ("mtd: nand: add ->exec_op() implementation") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
-
Andre Przywara authored
kvm_read_guest() will eventually look up in kvm_memslots(), which requires either to hold the kvm->slots_lock or to be inside a kvm->srcu critical section. In contrast to x86 and s390 we don't take the SRCU lock on every guest exit, so we have to do it individually for each kvm_read_guest() call. Use the newly introduced wrapper for that. Cc: Stable <stable@vger.kernel.org> # 4.12+ Reported-by: Jan Glauber <jan.glauber@caviumnetworks.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Andre Przywara authored
kvm_read_guest() will eventually look up in kvm_memslots(), which requires either to hold the kvm->slots_lock or to be inside a kvm->srcu critical section. In contrast to x86 and s390 we don't take the SRCU lock on every guest exit, so we have to do it individually for each kvm_read_guest() call. Provide a wrapper which does that and use that everywhere. Note that ending the SRCU critical section before returning from the kvm_read_guest() wrapper is safe, because the data has been *copied*, so we don't need to rely on valid references to the memslot anymore. Cc: Stable <stable@vger.kernel.org> # 4.8+ Reported-by: Jan Glauber <jan.glauber@caviumnetworks.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Andre Przywara authored
Apparently the development of update_affinity() overlapped with the promotion of irq_lock to be _irqsave, so the patch didn't convert this lock over. This will make lockdep complain. Fix this by disabling IRQs around the lock. Cc: stable@vger.kernel.org Fixes: 08c9fd04 ("KVM: arm/arm64: vITS: Add a helper to update the affinity of an LPI") Reported-by: Jan Glauber <jan.glauber@caviumnetworks.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Andre Przywara authored
As Jan reported [1], lockdep complains about the VGIC not being bullet proof. This seems to be due to two issues: - When commit 006df0f3 ("KVM: arm/arm64: Support calling vgic_update_irq_pending from irq context") promoted irq_lock and ap_list_lock to _irqsave, we forgot two instances of irq_lock. lockdeps seems to pick those up. - If a lock is _irqsave, any other locks we take inside them should be _irqsafe as well. So the lpi_list_lock needs to be promoted also. This fixes both issues by simply making the remaining instances of those locks _irqsave. One irq_lock is addressed in a separate patch, to simplify backporting. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2018-May/575718.html Cc: stable@vger.kernel.org Fixes: 006df0f3 ("KVM: arm/arm64: Support calling vgic_update_irq_pending from irq context") Reported-by: Jan Glauber <jan.glauber@caviumnetworks.com> Acked-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Philippe Bergheaud authored
Failure to synchronize the tunneled operations does not prevent the initialization of the cxl card. This patch reports the tunneled operations status via /sys. Signed-off-by: Philippe Bergheaud <felix@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Philippe Bergheaud authored
Skiboot used to set the default Tunnel BAR register value when capi mode was enabled. This approach was ok for the cxl driver, but prevented other drivers from choosing different values. Skiboot versions > 5.11 will not set the default value any longer. This patch modifies the cxl driver to set/reset the Tunnel BAR register when entering/exiting the cxl mode, with pnv_pci_set_tunnel_bar(). That should work with old skiboot (since we are re-writing the value already set) and new skiboot. mpe: The tunnel support was only merged into Linux recently, in commit d6a90bb8 ("powerpc/powernv: Enable tunneled operations") (v4.17-rc1), so with new skiboot kernels between that commit and this will not work correctly. Fixes: d6a90bb8 ("powerpc/powernv: Enable tunneled operations") Signed-off-by: Philippe Bergheaud <felix@linux.ibm.com> Reviewed-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Eric Anholt authored
Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 65101d8c ("drm/vc4: Expose performance counters to userspace") Link: https://patchwork.freedesktop.org/patch/msgid/20180409205813.7077-1-eric@anholt.netReviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Wanpeng Li authored
Anthoine reported: The period used by Windows change over time but it can be 1 milliseconds or less. I saw the limit_periodic_timer_frequency print so 500 microseconds is sometimes reached. As suggested by Paolo, lower the default timer frequency limit to a smaller interval of 200 us (5000 Hz) to leave some headroom. This is required due to Windows 10 changing the scheduler tick limit from 1024 Hz to 2048 Hz. Reported-by: Anthoine Bourgeois <anthoine.bourgeois@blade-group.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Anthoine Bourgeois <anthoine.bourgeois@blade-group.com> Cc: Darren Kenny <darren.kenny@oracle.com> Cc: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-