- 24 Oct, 2018 11 commits
-
-
Maarten Lankhorst authored
The UV plane is the master plane that does all color correction etc. It needs to be programmed with the dimensions for color plane 1 (UV). The Y plane just feeds the Y pixels to it. Program the scaler from the master only, and set PLANE_CTL_YUV420_Y_PLANE on the slave plane. Changes since v1: - Make a common skl_program_plane, and use it for both plane updates. Changes since v2: - Make color_plane explicit, to clarify skl_update_plane(). (Ville) Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181018115134.9061-8-maarten.lankhorst@linux.intel.com
-
Maarten Lankhorst authored
We configure the chroma upsampler with the same chroma siting as used by the scaler for consistency, the chroma upsampler is used instead of the scaler for YUV 4:2:0 on ICL's HDR planes. Signed-off-by:
-
Maarten Lankhorst authored
The first 3 planes (primary, sprite 0 and 1) have a dedicated chroma upsampler to upscale YUV420 to YUV444 and the scaler should only be used for upscaling. Because of this we shouldn't program the scalers in planar mode if NV12 and the chroma upsampler are used. Instead program the scalers like on normal planes. Sprite 2 and 3 have no dedicated scaler, and need to program the selected Y plane in the scaler mode. Changes since v1: - Make the comment less confusing. Changes since v2: - Fix checkpatch warning (Matt) - gen10- -> Pre-gen11 (Ville) - PS_SCALER_MODE_PACKED -> PS_SCALER_MODE_NORMAL. (Matt) - Add comment about scaler mode in intel_atomic_setup_scaler(). (Matt) - Rename need_scaling to need_scaler. (Matt) - Move the crtc need_scaling check to skl_update_scaler_crtc(). Signed-off-by:
-
Maarten Lankhorst authored
Skylake style watermarks program the UV parameters into wm->uv_wm, and have a separate DDB allocation for UV blocks into the same plane. Gen11 watermarks have a separate plane for Y and UV, with separate mechanisms. The simplest way to make it work is to keep the current way of programming watermarks and calculate the Y and UV plane watermarks from the master plane. Changes since v1: - Constify crtc_state where possible. - Make separate paths for planar formats in skl_build_pipe_wm() (Matt) - Make separate paths for calculating total data rate. (Matt) - Make sure UV watermarks are unused on gen11+ by adding a WARN. (Matt) Signed-off-by:
-
Maarten Lankhorst authored
To make NV12 working on icl, we need to update 2 planes simultaneously. I've chosen to do this in the CRTC step after plane validation is done, so we know what planes are (in)visible. The linked Y plane will get updated in intel_plane_update_planes_on_crtc(), by the call to update_slave, which gets the master's plane_state as argument. The link requires both planes for atomic_update to work, so make sure skl_ddb_add_affected_planes() adds both states. Changes since v1: - Introduce icl_is_nv12_y_plane(), instead of hardcoding sprite numbers. - Put all the state updating login in intel_plane_atomic_check_with_state(). - Clean up changes in intel_plane_atomic_check(). Changes since v2: - Fix intel_atomic_get_old_plane_state() to actually return old state. - Move visibility changes to preparation patch. - Only try to find a Y plane on gen11, earlier platforms only require a single plane. Changes since v3: - Fix checkpatch warning about to_intel_crtc() usage. - Add affected planes from icl_add_linked_planes() before check_planes(), it's a cleaner way to do this. (Ville) Changes since v4: - Clear plane links in icl_check_nv12_planes() for clarity. - Only pass crtc_state to icl_check_nv12_planes(). - Use for_each_new_intel_plane_in_state() in icl_check_nv12_planes. - Rename aux to linked. (Ville) Signed-off-by:
-
Maarten Lankhorst authored
Gen11 supports 7 planes + 1 cursor on each pipe. Bump I915_MAX_PLANES to 8, and set num_sprites correctly. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181018115134.9061-3-maarten.lankhorst@linux.intel.com
-
Maarten Lankhorst authored
On gen11, we can definitely smash the 32-bits barrier with just a when we enable all planes in the next patch. Changes since v1: - Use div64_u64 (ickle). Signed-off-by:
-
Ramalingam C authored
When a HDCP authentication is in progress, if the display sink is hot unplugged, all DDC/AUX transaction related to the HDCP authentication will fail. This patch moves those kind of HDCP DDC/AUX failures into the debug logs instead of errors. v2: Bksv invalid state is provided as debug msg Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Ramalingam C authored
Add a debugfs entry for providing the hdcp capabilities of the sink connected to the HDCP capable connectors. v2: Squashed the sink's hdcp capability into this patch. [Daniel] Signed-off-by:
-
Ramalingam C authored
HDCP check link is invoked only on CP_IRQ detection, instead of all short pulses. v3: No Changes. v4: Added sean in cc and collected the reviewed-by received. v5: No Change. v6: No Change. v7: No Change. v8: Rebased. Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Reviewed-by:
-
Ramalingam C authored
For reusability purpose, this patch implements the hdcp1.4 bksv's read and validation as a functions. For detecting the HDMI panel's HDCP capability this fucntions will be used. v2: Rebased. v3: No Changes. v4: inline tag is removed with modified error msg. v5: No Changes. v6: No Changes. v7: Realigned the code. Signed-off-by:
-
- 23 Oct, 2018 13 commits
-
-
Chris Wilson authored
Propagate the timeout on transferring the fw back to the caller where it may act upon it, usually by restarting the xfer before failing. v2: Simplify the wait to only wait upon the guc signaling completion, with an assertion that the fw xfer must have completed for it to be ready! Testcase: igt/drv_selftest/live_hangcheck Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181018195536.11522-1-chris@chris-wilson.co.uk
-
Ville Syrjälä authored
Remove the local lvds fixed mode pointer from the sdvo encoder structure and instead utilize intel_panel like everyone else. v2: intel_sdvo_destroy() is gone Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
Let's run through the entire plane check even when the plane is invisible due to zero constant alpha. This makes for more consistent behaviour since we check the src/dst coordinates, stride etc. against the hardware limits. Signed-off-by:
-
Ville Syrjälä authored
The SKL+ NV12 src width alignment w/a is still living in an odd place. Everything else was already relocated closer to the main plane check function. Move this workaround as well. As a bonus we avoid the funky rotated vs. not mess with the src coordinates as this now gets checked before we rotate the coordinates. Signed-off-by:
-
Lionel Landwerlin authored
The way our hardware is designed doesn't seem to let us use the MI_RECORD_PERF_COUNT command without setting up a circular buffer. In the case where the user didn't request OA reports to be available through the i915 perf stream, we can set the OA buffer to the minimum size to avoid consuming memory which won't be used by the driver. v2: Simplify oa buffer size exponent selection (Chris) Reuse vma size field (Lionel) v3: Restrict size opening parameter to values supported by HW (Chris) v4: Drop out of date comment (Matt) Add debug message when buffer size is rejected (Matt) Signed-off-by:Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181023100707.31738-5-lionel.g.landwerlin@intel.com
-
Lionel Landwerlin authored
We want to use some of the properties of the perf stream to program the hardware in a later commit. v2: Pass only perf stream as argument (Matthew) Signed-off-by:
-
Lionel Landwerlin authored
We initialize the OA buffer everytime we enable the OA unit (first call in gen[78]_oa_enable), so we don't need to initialize when preparing the metric set. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181023100707.31738-3-lionel.g.landwerlin@intel.com
-
Lionel Landwerlin authored
Lucas submitted a patch to generator script, so just reflecting the change here. Signed-off-by:
-
Daniele Ceraolo Spurio authored
commit e346a991 ("drm/i915/guc: drop negative doorbell alloc selftest") removed the negative case from the selftest and left no code between the goto from the positive case of the test and the label itself, so we can get rid of it. Reported-by:
-
Daniele Ceraolo Spurio authored
We stopped supporting fallback to execlists in commit 121981fa (drm/i915/guc: Combine enable_guc_loading|submission modparams). We do instead reset and retry in some cases, depending on the workarounds required by the platform. Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
A collection of very small cleanups/improvements around doorbell checking that do not deserve their own patch: - Move doorbell-related HW defs to intel_guc_reg.h - use GUC_NUM_DOORBELLS instead of GUC_DOORBELL_INVALID where appropriate - do not stop on error in guc_verify_doorbells - do not print drbreg on error: the only content of the register apart from the valid bit is the lower part of the physical memory address, which we can't use even if valid because we don't know which descriptor it came from (since the doorbell is in an unexpected state) - Move the checking of doorbell valid bit to a common helper. v2: add more cleanups (move defs, use GUC_NUM_DOORBELLS, don't stop in guc_verify_doorbells) (Michal) v3: move more things to intel_guc_reg, redefine GUC_DOORBELL_INVALID (Michal), drop guc_doorbell_qw since it just duplicates guc_doorbell_info Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: -
Daniele Ceraolo Spurio authored
Cacheline selection is only needed if we actually manage to reserve a doorbell. Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by:
-
Daniele Ceraolo Spurio authored
The 2 functions don't create or destroy anything, they just update the doorbell state in memory. Use init and fini instead for clarity. Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by:
-
- 22 Oct, 2018 16 commits
-
-
Rodrigo Vivi authored
No functional change. Just sorting this "if" statement from newer to older platform. Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
Rodrigo Vivi authored
No functional change. Just sorting this "if" block from newer to older platform. v2: Fix few positions (Ville) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
Just sorting this "if" block from newer to older platform. The main difference here is the addition of a missing case with return false that should never occur. And if it occurs it is better than to raise a warn than use the icl one. The gen >= 11 was already present in the previous logic, although hidden. So, in summary no real functional change. Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
No functional change. Just sorting this "if" block from newer to older platform. Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
No functional change. Just sorting this "if" block from newer to older platform. v2: Invert gen9_bc and gen9_lp (Ville) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Madhav Chauhan authored
This patch defines DSI_CMD_RXCTL, DSI_CMD_TXCTL registers, bitfields, masks and macros used for configuring DSI panel. v2: Define remaining bitfields v3 by Jani: - Alignment fix Signed-off-by:
Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by:
-
Madhav Chauhan authored
This patch enables DSI transcoders by writing to TRANS_CONF registers and wait for its state to be enabled. v2 by Jani: - Rebase Signed-off-by:
-
Madhav Chauhan authored
This patch defines TRANS_CONF registers for DSI ports 0 and 1. Bitfields of these registers used for enabling and reading the current state of transcoder. v2: Add blank line before comment v3 by Jani: - Move DSI specific .pipe_offsets to GEN11_FEATURES - Macro placement and comment juggling Signed-off-by:
-
Madhav Chauhan authored
As part of DSI enable sequence, transcoder timings (horizontal & vertical) need to be set so that transcoder will generate the stream output as per those timings. This patch set required transcoder timings as per BSPEC. v2: Remove TRANS_TIMING_SHIFT usage v3 by Jani: - Rebase - Reduce temp variable use - Checkpatch fix Signed-off-by:
-
Madhav Chauhan authored
This patch defines registers and bitfields used for programming DSI transcoder's horizontal and vertical timings. v2: Remove TRANS_TIMING_SHIFT definition v3 by Jani: - Group macros by transcoder Signed-off-by:
-
Madhav Chauhan authored
This patch select input PIPE for DSI, data lanes width, enable port sync mode and wait for DSI link to become ready. v2 by Jani: - Use MISSING_CASE with fallthrough instead of DRM_ERROR - minor stylistic changes Signed-off-by:
-
Madhav Chauhan authored
This patch defines TRANS_DDI_FUNC_CTL and TRANS_DDI_FUNC_CTL2 registers and their bitfields for DSI. These registers are used for enabling port sync mode, input pipe select, data lane width configuration etc. v2: Changes: - Remove redundant extra line - Correct some of bitfield definition v3 by Jani: - Move DSI transcoder offsets to GEN11_FEATURES Signed-off-by: -
Michal Wajdeczko authored
We wrongly assumed that GuC is only using last scratch register for G2H messages, but in fact it is also using register [14] to report sleep state status. Remove that register from our H2G send registers pool. v2: No message from host to GuC uses more than 8 registers and the GuC FW itself uses an 8-element array to store the H2G message, so we may reduce our send array to just 8 registers (Daniele) v3: use explicit define (Daniele) v4: and explicit comment (Daniele) Signed-off-by:
-
Madhav Chauhan authored
This patch programs DSI operation mode, pixel format, BGR info, link calibration etc for the DSI transcoder. This patch also extract BGR info of the DSI panel from VBT and save it inside struct intel_dsi which used for configuring DSI transcoder. v2: Rebase v3: Use newly defined bitfields. v4 by Jani: - Use intel_dsi_bitrate() - Make bgr_enabled bool - Use 0 instead of 0x0 - Replace DRM_ERROR() with MISSING_CASE() on pixel format and video mode - Use is_vid_mode() Signed-off-by:
-
Madhav Chauhan authored
This patch defines transcoder function configuration registers and its bitfields for both DSI ports. Used while programming/enabling DSI transcoder. v2: Changes (Jani N) - Define _SHIFT and _MASK for bitfields - Define values for fields already shifted in place v3 by Jani: - Fix _SHIFT fields copy-pasted from _MASK - Indentation fixes - Reduce S3D orientation to single macro - Wrap a macro parameter in parens Signed-off-by: -
Madhav Chauhan authored
This patch adds _MMIO_DSI macros for accessing DSI transcoder registers. v2: Use _MMIO_TRANS() (Ville) Credits-to: Jani N Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
