- 30 Sep, 2011 30 commits
-
-
Julian Andres Klode authored
Get 4 bytes of data from nvec at once instead of just a single byte. This makes the driver more similar to nvidias and might improve reliability. Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Julian Andres Klode authored
Return the return value of nvec_write_async() in the methods returning an int. Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Julian Andres Klode authored
Reject incomplete messages, causing the request to be transmitted again. This should fix various problems out there. Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Julian Andres Klode authored
If no RX buffer is available in state 1, jump to state 0 again. This will produce an incredible amount of warnings, but it is not supposed to happen anyway. Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Julian Andres Klode authored
Allow TX buffers to be allocated only in the upper 75% of the pool to avoid a completely filled buffer preventing the driver from processing responses. This also improves performance, as RX allocations do not require checking buffers allocated for TX unless there are more than 16 incoming messages -- which is highly unlikely. An earlier version used the lower 75% for TX messages, but that was considered to be not that effective due to the overlaps of RX and TX buffers mentioned above. Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Julian Andres Klode authored
Client code wishing to make use of nvec_write_sync() must have a way to free the returned pointer, otherwise we run out of poool memory fairly soon. Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Julian Andres Klode authored
Those macros are needed only for implementation purposes and do not have any use for other code wishing to use nvec. Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Julian Andres Klode authored
Add kernel-doc comments describing the functions and structs we currently have. Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Julian Andres Klode authored
Change nvec_write_async() to return an integer, 0 by default, a negative error on failure. Change nvec_write_sync() to check the return value and abort if it is negative. Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Julian Andres Klode authored
When the caps lock key is pressed, toggle the associated LED. According to Nvidia code, we should send 0x01 where we sent 0x07, but this does not appear to work correctly on the AC100. Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Julian Andres Klode authored
Forgotten in the last commit(s) which contained the copyrightable material, so let's add it now. I believe that only my nvec.c contributions are copyrightable, nvec.h is just interface naming, so does not deserve that yet. Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Julian Andres Klode authored
The scratch area is not part of the pool and thus gets no allocation message. Printing a free message would be confusing, and the pointer subtraction would be undefined behavior. Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Julian Andres Klode authored
Rewrite the interrupt handler to use a state machine similar to that found in the various kernels for the Advent Vega. This also changes the code to use the new functions introduced in the previous commits. This also merges the rewrite sent in August 2011 by Marc Dietrich, and thus also includes code by him. His original patch can be found on the mailing list. Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Julian Andres Klode authored
Add functions nvec_msg_is_event() and nvec_msg_size() which do just what the say: tell whether the message is an event, and getting the size of the message. Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Julian Andres Klode authored
Introduce nvec_gpio_set_value(), which works like gpio_set_value(), but also creates a debugging message, if that's enabled. Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Julian Andres Klode authored
Introduce two new functions nvec_msg_alloc() and nvec_msg_free() that allocate and free message buffers from the internal pool of messages. Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Marc Dietrich authored
This patch adds config dependencies for the NVEC keyboard, mouse, and power drivers. Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Marc Dietrich authored
This adds the relevant info to the MAINTAINERS file so people can find the right person to blame. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Marc Dietrich authored
Mostly small stuff only. Hopefully completed during the next release cycle. Signed-off-by: Marc Dietrich <marvin24@gmx.de> [jak@jak-linux.org: Removed some items no longer valid] Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Ilya Petrov authored
This patch adds support for LEDs connect to a nvec. A single brightness property is exported to sysfs. LEDs are selected via bitfields in the brightness value. Also the blinking behavior is selected through this method. Vendors may use different values for different HW designs. Signed-off-by: Ilya Petrov <ilya.muromec@gmail.com> Signed-off-by: Marc Dietrich <marvin24@gmx.de> [jak@jak-linux.org: Fixed checkpatch warnings] Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Marc Dietrich authored
The ec command used was for muting, not unmuting. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Marc Dietrich authored
Rework the tegra slave controller init to look more like in tegra-i2c.c. This makes the nvec init reliable. Also add de-init of the slave to be used during suspend. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Marc Dietrich authored
Split of the previous patch and the next by Marc, as that patch is not strictly a coding style fix only. Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Marc Dietrich authored
This patch fixes coding style and adds copyright notices. Signed-off-by: Marc Dietrich <marvin24@gmx.de> [jak@jak-linux.org: Merge later cleanup into that patch] Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Julian Andres Klode authored
Those headers were apparently included by other headers previously, but are not anymore. Signed-off-by: Julian Andres Klode <jak@jak-linux.org> Acked-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Kevin McKinney authored
This patch alters a line of code to make it more readable and easier to understand. The purpose of the original line of code was to compute the amount of memory to request from kmalloc. This mulit-step algorithm was being done in one line of code, thus making it more difficult to understand. Therefore, I split this algorithm into three logical steps. Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Kevin McKinney authored
This patch fixes two issues within bcm/Bcmchar.c. The first condition in the or statement checks if variable IoBuffer.OutputLength, defined from user space, is greater than the maximum value allowed for an unsigned short. IoBuffer.OutputLength is then used in a kmalloc call to return a pointer to memory. If this size is greater than an unsigned short, it becomes useless. The second condition in the or statement checks if the same variable, IoBuffer.OutputLength is equal to zero before invoking the kmalloc call. In this case, if a zero size is sent to kmalloc, a valid pointer to memory is returned instead of the expected NULL. Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Haiyang Zhang authored
Checking carrier status in netvsc_open() is not necessary. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Dan Carpenter authored
param->u.wpa_key.key_len comes from the user. If it's too large we would write past the end of the array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jonathan Cameron authored
This was originally there to avoid churn during a complex change. Now everything is stable lets get rid of this as it is missleading and confusing. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
- 27 Sep, 2011 10 commits
-
-
K. Y. Srinivasan authored
Now that all vmbus audit related comments have been addressed, update the TODO file to reflect this. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Kilroy authored
to declare wireless handlers. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Kilroy authored
WE21 clarified that ESSID should not be NULL terminated. The existing code didn't NULL terminate, but did play with length and then reset it again. Just stop it. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Kilroy authored
WEXT changes between versions 15 and 21 have been taken care of, so update the declared support. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Kilroy authored
Add recently added events to the capabilities reported in iw_range. Use capability macros instead of assuming the array offsets. Explicitly list scan capabilities. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Christopher Rice authored
drivers: staging: comedi: cb_das16_cs.c fixed over 80 line issue, and removed a space before tab issue. Signed-off-by: Christopher Rice <rice.christopher.a@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Johannes Thumshirn authored
Added log subject to printk()s in drivers/staging/comedi/drivers/pcmmio.c. Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Dan Carpenter authored
Smatch has a new check for Rosenberg type information leaks where structs are copied to the user with uninitialized stack data in them. In this path, the .uLinkRate member doesn't get initialized so I've set it to zero. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Marcos Paulo de Souza authored
In the source file there are a lot of warnings. I will send it in parts to be more easy to review. All the changes in this file its just alignment, and things like that. Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mark Einon authored
This driver has a long standing bug where removing and inserting the ethernet cable results in no packets being trnasmitted / received and hence no autonegotiation occurring. Fixed by resetting the rx/tx engines and queue on detecting a cable being removed. Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-