- 27 Oct, 2015 4 commits
-
-
Jiri Olsa authored
Currently any time we need to access socket or core id for given cpu, we access the sysfs topology file. Adding a cpus_aggr_map cpu_map to cache those entries. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
Kan Liang <kan.liang@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1445784728-21732-3-git-send-email-jolsa@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
Adding cpu_map__empty_new interface to create empty cpumap with given size. The cpumap entries are initialized with -1. It'll be used for caching cpu_map in following patches. Signed-off-by:
-
Jiri Olsa authored
Because the 'perf stat record' patches will use the id_offset member together with the priv pointer. Signed-off-by:
-
Namhyung Kim authored
Now usage_with_options() setup a pager before printing message so normal printf() or pr_err() will not be shown. The usage_with_options_msg() can be used to print some help message before usage strings. Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Acked-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1445701767-12731-4-git-send-email-namhyung@kernel.orgSigned-off-by:
-
- 26 Oct, 2015 3 commits
-
-
Namhyung Kim authored
It's annoying to see error or help message when command has many options like in perf record, report or top. So setup pager when print parser error or help message - it should be OK since no UI is enabled at the parsing time. The usage_with_options() already disables it by calling exit_browser() anyway. Signed-off-by:
Ingo Molnar <mingo@kernel.org> Tested-by:
-
Namhyung Kim authored
So that it can be more consistent with other --show-* options. The old name (--showcpuutilization) is provided only for compatibility. Signed-off-by:
-
Namhyung Kim authored
Currently if an option name is ambiguous it only prints first two matched option names but no help. It'd be better it could show all possible names and help messages too. Before: $ perf report --show Error: Ambiguous option: show (could be --show-total-period or --show-ref-call-graph) Usage: perf report [<options>] After: $ perf report --show Error: Ambiguous option: show (could be --show-total-period or --show-ref-call-graph) Usage: perf report [<options>] -n, --show-nr-samples Show a column with the number of samples --showcpuutilization Show sample percentage for different cpu modes -I, --show-info Display extended information about perf.data file --show-total-period Show a column with the sum of periods --show-ref-call-graph Show callgraph from reference event Signed-off-by:
-
- 25 Oct, 2015 1 commit
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements from Arnaldo Carvalho de Melo: New user-visible features: - Show ordered command line options when -h is used or when an unknown option is specified. (Arnaldo Carvalho de Melo) - If options are passed after -h, show just its descriptions, not all options. (Arnaldo Carvalho de Melo) Signed-off-by:
-
- 24 Oct, 2015 2 commits
-
-
Arnaldo Carvalho de Melo authored
Some tools have a lot of options, so, providing a way to show help just for some of them may come handy: $ perf report -h --tui Usage: perf report [<options>] --tui Use the TUI interface $ perf report -h --tui --showcpuutilization -b -c Usage: perf report [<options>] -b, --branch-stack use branch records for per branch histogram filling -c, --comms <comm[,comm...]> only consider symbols in these comms --showcpuutilization Show sample percentage for different cpu modes --tui Use the TUI interface $ Using it with perf bash completion is also handy, just make sure you source the needed file: $ . ~/git/linux/tools/perf/perf-completion.sh Then press tab/tab after -- to see a list of options, put them after -h and only the options chosen will have its help presented: $ perf report -h -- --asm-raw --demangle-kernel --group --kallsyms --pretty --stdio --branch-history --disassembler-style --gtk --max-stack --showcpuutilization --symbol-filter --branch-stack --dsos --header --mem-mode --show-info --symbols --call-graph --dump-raw-trace --header-only --modules --show-nr-samples --symfs --children --exclude-other --hide-unresolved --objdump --show-ref-call-graph --threads --column-widths --fields --ignore-callees --parent --show-total-period --tid --comms --field-separator --input --percentage --socket-filter --tui --cpu --force --inverted --percent-limit --sort --verbose --demangle --full-source-path --itrace --pid --source --vmlinux $ perf report -h --socket-filter Usage: perf report [<options>] --socket-filter <n> only show processor socket that match with this filter Suggested-by: -
Arnaldo Carvalho de Melo authored
When asking for a listing of the options, be it using -h or when an unknown option is passed, order it by one-letter options, then the ones having just long names. Suggested-by:
-
- 23 Oct, 2015 1 commit
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - The default for callchains is back to 'callee' when --children is not used. (Namhyung Kim) - Move the 'use_offset' option to the right place where the annotate code expects it to be to be able to properly handle it. (Namhyung Kim) - Don't die when an unknown 'annotate' option is found in the perf config file (usually ~/.perfconfig), just warn the user. (Arnaldo Carvalho de Melo) Infrastructure changes: - Support %ps/%pS in libtraceevent. (Scott Wood) Signed-off-by:
-
- 22 Oct, 2015 9 commits
-
-
Arnaldo Carvalho de Melo authored
The perf_config() infrastructure we inherited from git calls die() when the provided config callback returns -1, meaning some key in a config section is unexpected, that seems ok for a stdio based tool, but in --tui we end up messing up the output, so just tell the user about the error, wait for a keystroke and return 0, being more resilient and proceeding with what we managed to parse. That die() needs to die, tho :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-pqtsffh2kwr5mwm4qg9kgotu@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
I.e. we want to tell the user about errors found during, for instance, the ui_browser initialization, so that a call to ui__warning() appears as a window waiting for a key to be pressed. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ederrwizcl6mfz10vfobl5qq@git.kernel.orgSigned-off-by:
-
Namhyung Kim authored
The annotate__configs should be sorted so that it can use bsearch(3). However commit 0c4a5bce ("perf annotate: Display total number of samples with --show-total-period") added a new config item at the end. This resulted in the 'annotate.use_offset' config variable cannot be found and perf terminated like below: $ perf report bad config file line 6 in ~/.perfconfig Signed-off-by:
-
Namhyung Kim authored
The --call-graph option is complex so we should provide better guide for users. Also change help message to be consistent with config option names. Now perf top will show help like below: $ perf top --call-graph Error: option `call-graph' requires a value Usage: perf top [<options>] --call-graph <record_mode[,record_size],print_type,threshold[,print_limit],order,sort_key[,branch]> setup and enables call-graph (stack chain/backtrace): record_mode: call graph recording mode (fp|dwarf|lbr) record_size: if record_mode is 'dwarf', max size of stack recording (<bytes>) default: 8192 (bytes) print_type: call graph printing style (graph|flat|fractal|none) threshold: minimum call graph inclusion threshold (<percent>) print_limit: maximum number of call graph entry (<number>) order: call graph order (caller|callee) sort_key: call graph sort key (function|address) branch: include last branch info to call graph (branch) Default: fp,graph,0.5,caller,function Requested-by:Frederic Weisbecker <fweisbec@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Chandler Carruth <chandlerc@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1445524112-5201-2-git-send-email-namhyung@kernel.orgSigned-off-by:
-
Namhyung Kim authored
The caller callchain order is useful with --children option since it can show 'overview' style output, but other commands which don't use --children feature like 'perf script' or even 'perf report/top' without --children are better to keep callee order. Signed-off-by:
Brendan Gregg <brendan.d.gregg@gmail.com> Acked-by:
-
Namhyung Kim authored
Currently 'perf top --call-graph' option is same as 'perf record'. But 'perf top' also need to receive display options in 'perf report'. To do that, change parse_callchain_report_opt() to allow record options too. Now perf top can receive display options like below: $ perf top --call-graph Error: option `call-graph' requires a value Usage: perf top [<options>] --call-graph <mode[,dump_size],output_type,min_percent[,print_limit],call_order[,branch]> setup and enables call-graph (stack chain/backtrace) recording: fp dwarf lbr, output_type (graph, flat, fractal, or none), min percent threshold, optional print limit, callchain order, key (function or address), add branches $ perf top --call-graph callee,graph,fp Signed-off-by: -
Namhyung Kim authored
These messages will be used by 'perf top' in the next patch. Signed-off-by:
-
Scott Wood authored
Commits such as 65dd297a ("xfs: %pF is only for function pointers") caused a regression because pretty_print() didn't support %ps/%pS. The current %pf/%pF implementation in pretty_print() is what %ps/%pS is supposed to do, so use the same code for %ps/%pS. Addressing the incorrect %pf/%pF implementation is beyond the scope of this patch. Signed-off-by:
Scott Wood <scottwood@freescale.com> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Dave Chinner <david@fromorbit.com> Link: http://lkml.kernel.org/r/20150831211637.GA12848@home.buserror.netSigned-off-by:
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Print branch filter state in verbose mode. (Andi Kleen) - Fix core dump caused by per-socket/core system-wide stat. (Kan Liang) - Update libtraceevent KVM plugin. (Paolo Bonzini) Infrastructure changes: - Add fixdep to 'tools/build' .gitignore. (Yunlong Song) Signed-off-by:
-
- 21 Oct, 2015 2 commits
-
-
Arnaldo Carvalho de Melo authored
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-q0lde9ajs84oi38nlyjcqbwg@git.kernel.orgSigned-off-by:
-
Andi Kleen authored
Add a missing field to the perf_event_attr debug output. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/1445366797-30894-4-git-send-email-andi@firstfloor.org [ Print it between config2 and sample_regs_user (peterz)] Signed-off-by:
-
- 20 Oct, 2015 9 commits
-
-
Kan Liang authored
Perf will core dump if --per-socket/core -a are applied for perf stat. The root cause is that cpu_map__build_map set refcnt of evlist's cpu_map to 1. It should set refcnt for the newly created cpu_map, not evlist's cpu_map. Here is the example: # perf stat -e cycles --per-socket -a sleep 1 Performance counter stats for 'system wide': S0 36 30,196,257 cycles S1 28 15,823,536 cycles 1.001126828 seconds time elapsed *** Error in `./perf': corrupted double-linked list: 0x00000000021f9090 *** ======= Backtrace: ========= /lib64/libc.so.6[0x3002e7bbe7] /lib64/libc.so.6[0x3002e7d2b5] ./perf(perf_evsel__delete+0x28)[0x485bdd] ./perf[0x4800e8] ./perf(perf_evlist__delete+0x5e)[0x482cd5] ./perf(cmd_stat+0xf25)[0x432328] ./perf[0x4768e0] ./perf[0x476ad6] ./perf[0x476b41] ./perf(main+0x1d0)[0x476db2] /lib64/libc.so.6(__libc_start_main+0xf5)[0x3002e21b45] ./perf[0x4202c5] Signed-off-by: -
Paolo Bonzini authored
The format of the role word has changed through the years and the plugin was never updated; some VMX exit reasons were missing too. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Acked-by:
-
Yunlong Song authored
Commit 7c422f55 ("tools build: Build fixdep helper from perf and basic libs") dynamically creates fixdep during the perf building. Add it to .gitignore. Signed-off-by:
Yunlong Song <yunlong.song@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 7c422f55 ("tools build: Build fixdep helper from perf and basic libs") Link: http://lkml.kernel.org/r/1444899116-8220-1-git-send-email-yunlong.song@huawei.comSigned-off-by:
-
Stephane Eranian authored
This patch add a new branch type sampling filter to perf record. It is named 'call' and maps to PERF_SAMPLE_BRANCH_CALL. It samples direct call branches only, unlike 'any_call' which includes indirect calls as well. $ perf record -j call -e cycles ..... The man page is updated accordingly. Signed-off-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
-
Stephane Eranian authored
The patch catches PERF_SAMPLE_BRANCH_CALL because it is not clear whether this is actually supported by the hardware. Signed-off-by:
-
Stephane Eranian authored
This patch enables the suport for the PERF_SAMPLE_BRANCH_CALL for Intel x86 processors. When the processor support LBR filtering this the selection is done in hardware. Otherwise, the filter is applied by software. Note that we chose to include zero length calls because they also represent calls. Signed-off-by:
-
Stephane Eranian authored
Add a new branch sample type to cover only call branches (function calls). The current ANY_CALL included direct, indirect calls and far jumps. We want to be able to differentiate indirect from direct calls. Therefore we introduce PERF_SAMPLE_BRANCH_CALL. The implementation is up to each architecture. Signed-off-by:
-
Adrian Hunter authored
Commit: b20112ed ("perf/x86: Improve accuracy of perf/sched clock") allowed the time_shift value in perf_event_mmap_page to be as much as 32. Unfortunately the documented algorithms for using time_shift have it shifting an integer, whereas to work correctly with the value 32, the type must be u64. In the case of perf tools, Intel PT decodes correctly but the timestamps that are output (for example by perf script) have lost 32-bits of granularity so they look like they are not changing at all. Fix by limiting the shift to 31 and adjusting the multiplier accordingly. Also update the documentation of perf_event_mmap_page so that new code based on it will be more future-proof. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes: User visible changes: - 'perf bench mem' now prefaults unconditionally, no sense in providing modes where page faults are measured. (Ingo Molnar) - Harmonize -l/--nr_loops accross 'perf bench'. (Ingo Molnar) - Various 'perf bench' consistency improvements. (Ingo Molnar) - Suppress libtraceevent warnings in non-verbose 'perf test' mode. (Namhyung Kim) - Move some tracepoint event test error messages to the verbose mode of 'perf test'. (Namhyung Kim) - Make 'perf help' usage message consistent with other tools. (Yunlong Song) Build fixes: - Fix 'perf bench' build with gcc 4.4.7. (Arnaldo Carvalho de Melo) Infrastructure changes: - 'perf stat' prep work for the 'perf stat scripting' patchkit. (Jiri Olsa) Signed-off-by:
-
- 19 Oct, 2015 9 commits
-
-
Arnaldo Carvalho de Melo authored
To avoid this splat with gcc 4.4.7: cc1: warnings being treated as errors bench/mem-functions.c:273: error: missing initializer bench/mem-functions.c:273: error: (near initialization for ‘memcpy_functions[4].desc’) bench/mem-functions.c:366: error: missing initializer bench/mem-functions.c:366: error: (near initialization for ‘memset_functions[4].desc’) Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/n/tip-0s8o6tgw1pdwvdv02llb9tkd@git.kernel.orgSigned-off-by:
-
Jiri Olsa authored
There's no need to check sampling output fields for events without perf_event_attr::sample_type field set. Signed-off-by:
-
Jiri Olsa authored
Adding data arg to cpu_map__build_map callback, so we could pass data along to the callback. It'll be needed in following patches to retrieve topology info from perf.data. Signed-off-by:
-
Jiri Olsa authored
We'll need to call it from perf stat in the stat_script patchkit Signed-off-by:
-
Jiri Olsa authored
Adding AGGR_UNSET mode, so we could distinguish unset aggr_mode in following patches. Signed-off-by:
-
Jiri Olsa authored
It's used as the perf_evsel::priv data, so the name suits better. Also we'll need the perf_stat name free for more generic struct. Signed-off-by:
-
Yunlong Song authored
Capitalize 'usage' to make it consistent with all the other 'Usage' in the codes, e.g., usage_builtin. Signed-off-by:
-
Ingo Molnar authored
So right now we output this text: memcpy: Benchmark for memcpy() functions memset: Benchmark for memset() functions all: Test all memory access benchmarks But the right verb to use with benchmarks is to 'run' them, not 'test' them. So change this (and all similar texts) to: memcpy: Benchmark for memcpy() functions memset: Benchmark for memset() functions all: Run all memory access benchmarks Signed-off-by: -
Ingo Molnar authored
So right now there's a somewhat inconsistent mess of the benchmarking code and options sometimes calling benchmarked functions 'functions', sometimes calling them 'routines'. Name them 'functions' consistently. Signed-off-by:
-
