- 04 Feb, 2015 40 commits
-
-
Jochen Hein authored
commit 1d90d6d5 upstream. Without this the aux port does not get detected, and consequently the touchpad will not work. With this patch the touchpad is detected: $ dmesg | grep -E "(SYN|i8042|serio)" pnp 00:03: Plug and Play ACPI device, IDs SYN1d22 PNP0f13 (active) i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800, board id: 2863, fw id: 1473085 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 dmidecode excerpt for this laptop is: Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Medion Product Name: Akoya E7225 Version: 1.0 Signed-off-by: Jochen Hein <jochen@jochen.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Trond Myklebust authored
commit 3175e1dc upstream. If we start state recovery on a client that failed to initialise correctly, then we are very likely to Oops. Reported-by: "Mkrtchyan, Tigran" <tigran.mkrtchyan@desy.de> Link: http://lkml.kernel.org/r/130621862.279655.1421851650684.JavaMail.zimbra@desy.deSigned-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Peng Tao authored
commit ee8a1a8b upstream. We only support swap file calling nfs_direct_IO. However, application might be able to get to nfs_direct_IO if it toggles O_DIRECT flag during IO and it can deadlock because we grab inode->i_mutex in nfs_file_direct_write(). So return 0 for such case. Then the generic layer will fall back to buffer IO. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Viktor Babrian authored
commit 7ffd7b4e upstream. Put controller into init mode in network stop to end pending transmissions. The issue is observed in cases when transmitted frame is not acked. Signed-off-by: Viktor Babrian <babrian.viktor@renyi.mta.hu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> [ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Peter Hutterer authored
commit 8543cf1c upstream. LEN0037 found in the Lenovo ThinkPad X1 Carbon 2nd (2014 model) Reported-and-tested-by: Bjoern Olausson <bjoern@olausson.de> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Laurent Dufour authored
commit e6eb2eba upstream. The commit 3b8a3c01 ("powerpc/pseries: Fix endiannes issue in RTAS call from xmon") was fixing an endianness issue in the call made from xmon to RTAS. However, as Michael Ellerman noticed, this fix was not complete, the token value was not byte swapped. This lead to call an unexpected and most of the time unexisting RTAS function, which is silently ignored by RTAS. This fix addresses this hole. Reported-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Peter Ujfalusi authored
commit 20602e34 upstream. We should select FSR also to be driven by McBSP, not only FSX. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Qais Yousef authored
commit d3268a40 upstream. In soc_new_compress() when rtd->dai_link->dynamic is set, we create the pcm substreams with this call: ret = snd_pcm_new_internal(rtd->card->snd_card, new_name, num, 1, 0, &be_pcm); which passes 0 as capture_count leading to be_pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream being NULL, hence when trying to set rtd a few lines below we get an oops. Fix by using rtd->dai_link->dpcm_playback and rtd->dai_link->dpcm_capture as playback_count and capture_count to snd_pcm_new_internal(). Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Geert Uytterhoeven authored
commit 7ddfdb5c upstream. If asoc_simple_card_probe() fails, asoc_simple_card_unref() may be called before dev_set_drvdata(), causing a NULL pointer dereference in asoc_simple_card_unref(): Unable to handle kernel NULL pointer dereference at virtual address 000000d4 ... PC is at asoc_simple_card_unref+0x14/0x48 LR is at asoc_simple_card_probe+0x3d4/0x40c This typically happens because asoc_simple_card_parse_of() returns -EPROBE_DEFER, but other failure modes are possible. devm_snd_soc_register_card()/snd_soc_register_card() may fail either before or after dev_set_drvdata(). Pass a snd_soc_card pointer instead of a platform_device pointer to asoc_simple_card_unref() to fix this. Note that if CONFIG_OF_DYNAMIC=n, of_node_put() is a dummy, and gcc may optimize away the loop over card->dai_link, never actually dereferencing card, and thus avoiding the crash... Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: e512e001 ("ASoC: simple-card: Fix the reference count of device nodes") Signed-off-by: Mark Brown <broonie@kernel.org> [ luis: backported to 3.16: - adjusted context - dropped changes to asoc_simple_card_remove() ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Peter Rosin authored
commit 3a8e5019 upstream. The DSP programs are listed out of order. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Ashay Jaiswal authored
commit 83b0302d upstream. The regulator framework maintains a list of consumer regulators for a regulator device and protects it from concurrent access using the regulator device's mutex lock. In the case of regulator_put() the consumer is removed and regulator device's parameters are updated without holding the regulator device's mutex. This would lead to a race condition between the regulator_put() and any function which traverses the consumer list or modifies regulator device's parameters. Fix this race condition by holding the regulator device's mutex in case of regulator_put. Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Zidan Wang authored
commit 22ee76da upstream. wm8960 codec can't support sample rate 11250, it must be 11025. Signed-off-by: Zidan Wang <b50113@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Andy Shevchenko authored
commit 67bf9cda upstream. The FIFO size is 40 accordingly to the specifications, but this means 0x40, i.e. 64 bytes. This patch fixes the typo and enables FIFO size autodetection for Intel MID devices. Fixes: 7063c0d9 (spi/dw_spi: add DMA support) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Axel Lin authored
commit d297933c upstream. Current code tries to find the highest valid fifo depth by checking the value it wrote to DW_SPI_TXFLTR. There are a few problems in current code: 1) There is an off-by-one in dws->fifo_len setting because it assumes the latest register write fails so the latest valid value should be fifo - 1. 2) We know the depth could be from 2 to 256 from HW spec, so it is not necessary to test fifo == 257. In the case fifo is 257, it means the latest valid setting is fifo = 256. So after the for loop iteration, we should check fifo == 2 case instead of fifo == 257 if detecting the FIFO depth fails. This patch fixes above issues. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-and-tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Aurelien BOUIN authored
commit adc60298 upstream. The xDC field should have 5 bit width according to Reference Manual. Thus this patch fixes it. Signed-off-by: Aurelien BOUIN <a_bouin@yahoo.fr> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Mika Westerberg authored
commit c957e8f0 upstream. Once the current message is finished, the driver notifies SPI core about this by calling spi_finalize_current_message(). This function queues next message to be transferred. If there are more messages in the queue, it is possible that the driver is asked to transfer the next message at this point. When spi_finalize_current_message() returns the driver clears the drv_data->cur_chip pointer to NULL. The problem is that if the driver already started the next message clearing drv_data->cur_chip will cause NULL pointer dereference which crashes the kernel like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 IP: [<ffffffffa0022bc8>] cs_deassert+0x18/0x70 [spi_pxa2xx_platform] PGD 78bb8067 PUD 37712067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 1 PID: 11 Comm: ksoftirqd/1 Tainted: G O 3.18.0-rc4-mjo #5 Hardware name: Intel Corp. VALLEYVIEW B3 PLATFORM/NOTEBOOK, BIOS MNW2CRB1.X64.0071.R30.1408131301 08/13/2014 task: ffff880077f9f290 ti: ffff88007a820000 task.ti: ffff88007a820000 RIP: 0010:[<ffffffffa0022bc8>] [<ffffffffa0022bc8>] cs_deassert+0x18/0x70 [spi_pxa2xx_platform] RSP: 0018:ffff88007a823d08 EFLAGS: 00010202 RAX: 0000000000000008 RBX: ffff8800379a4430 RCX: 0000000000000026 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff8800379a4430 RBP: ffff88007a823d18 R08: 00000000ffffffff R09: 000000007a9bc65a R10: 000000000000028f R11: 0000000000000005 R12: ffff880070123e98 R13: ffff880070123de8 R14: 0000000000000100 R15: ffffc90004888000 FS: 0000000000000000(0000) GS:ffff880079a80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000048 CR3: 000000007029b000 CR4: 00000000001007e0 Stack: ffff88007a823d58 ffff8800379a4430 ffff88007a823d48 ffffffffa0022c89 0000000000000000 ffff8800379a4430 0000000000000000 0000000000000006 ffff88007a823da8 ffffffffa0023be0 ffff88007a823dd8 ffffffff81076204 Call Trace: [<ffffffffa0022c89>] giveback+0x69/0xa0 [spi_pxa2xx_platform] [<ffffffffa0023be0>] pump_transfers+0x710/0x740 [spi_pxa2xx_platform] [<ffffffff81076204>] ? pick_next_task_fair+0x744/0x830 [<ffffffff81049679>] tasklet_action+0xa9/0xe0 [<ffffffff81049a0e>] __do_softirq+0xee/0x280 [<ffffffff81049bc0>] run_ksoftirqd+0x20/0x40 [<ffffffff810646df>] smpboot_thread_fn+0xff/0x1b0 [<ffffffff810645e0>] ? SyS_setgroups+0x150/0x150 [<ffffffff81060f9d>] kthread+0xcd/0xf0 [<ffffffff81060ed0>] ? kthread_create_on_node+0x180/0x180 [<ffffffff8187a82c>] ret_from_fork+0x7c/0xb0 Fix this by clearing drv_data->cur_chip before we call spi_finalize_current_message(). Reported-by: Martin Oldfield <m@mjoldfield.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Andrew Duggan authored
commit 8414947a upstream. If a touchpad reports the F11 data40 register then this indicates that the touchpad reports additional ACM (Accidental Contact Mitigation) data after the F11 data in the HID attention report. These additional bytes shift the position of the F30 button data causing the driver to incorrectly report button state when this functionality is present. This patch accounts for the additional data in the report. Fixes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1398533Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Andrew Duggan authored
commit 9e2c327e upstream. There are additional queries which are optional and may not be present depending on the configuration of the firmware. Knowing which queries are present is needed to properly compute the address of Query 12 and all subsequent queries. Additional bits in Query 1 are used to indicate the presence of these optional queries. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Michal Hocko authored
commit 45f87de5 upstream. Commit 2457aec6 ("mm: non-atomically mark page accessed during page cache allocation where possible") has added a separate parameter for specifying gfp mask for radix tree allocations. Not only this is less than optimal from the API point of view because it is error prone, it is also buggy currently because grab_cache_page_write_begin is using GFP_KERNEL for radix tree and if fgp_flags doesn't contain FGP_NOFS (mostly controlled by fs by AOP_FLAG_NOFS flag) but the mapping_gfp_mask has __GFP_FS cleared then the radix tree allocation wouldn't obey the restriction and might recurse into filesystem and cause deadlocks. This is the case for most filesystems unfortunately because only ext4 and gfs2 are using AOP_FLAG_NOFS. Let's simply remove radix_gfp_mask parameter because the allocation context is same for both page cache and for the radix tree. Just make sure that the radix tree gets only the sane subset of the mask (e.g. do not pass __GFP_WRITE). Long term it is more preferable to convert remaining users of AOP_FLAG_NOFS to use mapping_gfp_mask instead and simplify this interface even further. Reported-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Michal Marek authored
commit a16c5f99 upstream. scripts/Makefile.clean treats absolute path specially, but $(objtree)/debian is no longer an absolute path since 7e1c0477 (kbuild: Use relative path for $(objtree). Work around this by checking if the path starts with $(objtree)/. Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com> Fixes: 7e1c0477 (kbuild: Use relative path for $(objtree) Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Daniel Borkmann authored
commit b485342b upstream. Commit a074335a ("x86, um: Mark system call tables readonly") was supposed to mark the sys_call_table in UML as RO by adding the const, but it doesn't have the desired effect as it's nevertheless being placed into the data section since __cacheline_aligned enforces sys_call_table being placed into .data..cacheline_aligned instead. We need to use the ____cacheline_aligned version instead to fix this issue. Before: $ nm -v arch/x86/um/sys_call_table_64.o | grep -1 "sys_call_table" U sys_writev 0000000000000000 D sys_call_table 0000000000000000 D syscall_table_size After: $ nm -v arch/x86/um/sys_call_table_64.o | grep -1 "sys_call_table" U sys_writev 0000000000000000 R sys_call_table 0000000000000000 D syscall_table_size Fixes: a074335a ("x86, um: Mark system call tables readonly") Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Richard Weinberger authored
commit f911d731 upstream. futex_atomic_cmpxchg_inatomic() does not work on UML because it triggers a copy_from_user() in kernel context. On UML copy_from_user() can only be used if the kernel was called by a real user space process such that UML can use ptrace() to fetch the value. Reported-by: Miklos Szeredi <miklos@szeredi.hu> Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Richard Weinberger <richard@nod.at> Tested-by: Daniel Walter <d.walter@0x90.at> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Dan Carpenter authored
commit b5c8afe5 upstream. "origPtr" is used as an offset into the bd->dbuf[] array. That array is allocated in start_bunzip() and has "bd->dbufSize" number of elements so the test here should be >= instead of >. Later we check "origPtr" again before using it as an offset so I don't know if this bug can be triggered in real life. Fixes: bc22c17e ('bzip2/lzma: library support for gzip, bzip2 and lzma decompression') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Alain Knaff <alain@knaff.lu> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Keerthy authored
commit c4cf0935 upstream. Correct returning IRQ_HANDLED unconditionally in the irq handler. Return IRQ_NONE for some interrupt which we do not expect to be handled in this handler. This prevents kernel stalling with back to back spurious interrupts. Fixes: 2722e56d ("OMAP4: l3: Introduce l3-interconnect error handling driver") Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Keerthy authored
commit 61b43d4e upstream. On certain SoCs such as AM437x SoC, L3_noc error registers are maintained in power domain such as per domain which looses context as part of low power state such as RTC+DDR mode. On these platforms when we mask interrupts which we cannot handle, the source of these interrupts still remain on resume, however, the flag mux registers now contain their reset value (unmasked) - this breaks the system with infinite interrupts since we do not these interrupts to take place ever again. To handle this: restore the masking of interrupts which we have already recorded in the system as ones we cannot handle. Fixes: 2100b595 ("bus: omap_l3_noc: ignore masked out unclearable targets") Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Francesco Ruggeri authored
commit c4dc3046 upstream. Commit f95499c3 ("n_tty: Don't wait for buffer work in read() loop") introduces a race window where a pty master can be signalled that the pty slave was closed before all the data that the slave wrote is delivered. Commit f8747d4a ("tty: Fix pty master read() after slave closes") fixed the problem in case of n_tty_read, but the problem still exists for n_tty_poll. This can be seen by running 'for ((i=0; i<100;i++));do ./test.py ;done' where test.py is: import os, select, pty (pid, pty_fd) = pty.fork() if pid == 0: os.write(1, 'This string should be received by parent') else: poller = select.epoll() poller.register( pty_fd, select.EPOLLIN ) ready = poller.poll( 1 * 1000 ) for fd, events in ready: if not events & select.EPOLLIN: print 'missed POLLIN event' else: print os.read(fd, 100) poller.close() The string from the slave is missed several times. This patch takes the same approach as the fix for read and special cases this condition for poll. Tested on 3.16. Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Dmitry Torokhov authored
commit 7c4f5607 upstream. The 'max' size passed into the function is measured in number of bits (KEY_MAX, LED_MAX, etc) so we need to convert it accordingly before trying to copy the data out, otherwise we will try copying too much and end up with up with a page fault. Reported-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Mathias Krause authored
commit 3e14dcf7 upstream. Commit 5d26a105 ("crypto: prefix module autoloading with "crypto-"") changed the automatic module loading when requesting crypto algorithms to prefix all module requests with "crypto-". This requires all crypto modules to have a crypto specific module alias even if their file name would otherwise match the requested crypto algorithm. Even though commit 5d26a105 added those aliases for a vast amount of modules, it was missing a few. Add the required MODULE_ALIAS_CRYPTO annotations to those files to make them get loaded automatically, again. This fixes, e.g., requesting 'ecb(blowfish-generic)', which used to work with kernels v3.18 and below. Also change MODULE_ALIAS() lines to MODULE_ALIAS_CRYPTO(). The former won't work for crypto modules any more. Fixes: 5d26a105 ("crypto: prefix module autoloading with "crypto-"") Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> [ luis: backported to 3.16: dropped changes to: - arch/x86/crypto/sha-mb/sha1_mb.c ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Kees Cook authored
commit 4943ba16 upstream. This adds the module loading prefix "crypto-" to the template lookup as well. For example, attempting to load 'vfat(blowfish)' via AF_ALG now correctly includes the "crypto-" prefix at every level, correctly rejecting "vfat": net-pf-38 algif-hash crypto-vfat(blowfish) crypto-vfat(blowfish)-all crypto-vfat Reported-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> [ luis: backported to 3.16: dropped changes to: - crypto/mcryptd.c ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Kees Cook authored
commit 5d26a105 upstream. This prefixes all crypto module loading with "crypto-" so we never run the risk of exposing module auto-loading to userspace via a crypto API, as demonstrated by Mathias Krause: https://lkml.org/lkml/2013/3/4/70Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> [ luis: backported to 3.16: dropped changes to: - arch/arm/crypto/sha1_neon_glue.c - arch/arm/crypto/sha512_neon_glue.c - arch/x86/crypto/des3_ede_glue.c - drivers/crypto/qat/qat_common/adf_ctl_drv.c ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Johan Hovold authored
commit 41f632fe upstream. Remove bogus call to of_gpiochip_add (and of_gpio_chip remove in error path) which is also called when adding the gpio chip. This prevents adding the same pinctrl range twice. Fixes: 3f8c50c9 ("OF: pinctrl: MIPS: lantiq: implement lantiq/xway pinctrl support") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Pramod Gurav authored
commit 849a8c25 upstream. This patch releases gpiochip resources with of_gpiochip_remove and gpiochip_remove in failure cases. CC: John Crispin <blogic@openwrt.org> CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Andy Shevchenko authored
commit 4aaa7187 upstream. DMA mapped IO should be unmapped on the error path in probe() and unconditionally on remove(). Fixes: 62936009 ([libata] Add 460EX on-chip SATA driver, sata_dwc_460ex) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Joe Thornber authored
commit a59db676 upstream. Introduce a new variable to count the number of allocated migration structures. The existing variable cache->nr_migrations became overloaded. It was used to: i) track of the number of migrations in flight for the purposes of quiescing during suspend. ii) to estimate the amount of background IO occuring. Recent discard changes meant that REQ_DISCARD bios are processed with a migration. Discards are not background IO so nr_migrations was not incremented. However this could cause quiescing to complete early. (i) is now handled with a new variable cache->nr_allocated_migrations. cache->nr_migrations has been renamed cache->nr_io_migrations. cleanup_migration() is now called free_io_migration(), since it decrements that variable. Also, remove the unused cache->next_migration variable that got replaced with with prealloc_structs a while ago. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Joe Thornber authored
commit 9b1cc9f2 upstream. If a DM table is reloaded with an inactive table when the device is not suspended (normal procedure for LVM2), then there will be two dm-bufio objects that can diverge. This can lead to a situation where the inactive table uses bufio to read metadata at the same time the active table writes metadata -- resulting in the inactive table having stale metadata buffers once it is promoted to the active table slot. Fix this by using reference counting and a global list of cache metadata objects to ensure there is only one metadata object per metadata device. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Nadav Amit authored
commit f3747379 upstream. SYSENTER emulation is broken in several ways: 1. It misses the case of 16-bit code segments completely (CVE-2015-0239). 2. MSR_IA32_SYSENTER_CS is checked in 64-bit mode incorrectly (bits 0 and 1 can still be set without causing #GP). 3. MSR_IA32_SYSENTER_EIP and MSR_IA32_SYSENTER_ESP are not masked in legacy-mode. 4. There is some unneeded code. Fix it. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Alexandre Demers authored
commit 52045217 upstream. Many users see this message when booting without knowning that it is of no importance and that TSC calibration may have succeeded by another way. As explained by Paul Bolle in http://lkml.kernel.org/r/1348488259.1436.22.camel@x61.thuisdomein "Fast TSC calibration failed" should not be considered as an error since other calibration methods are being tried afterward. At most, those send a warning if they fail (not an error). So let's change the message from error to warning. [ tglx: Make if pr_info. It's really not important at all ] Fixes: c767a54b x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level> Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Link: http://lkml.kernel.org/r/1418106470-6906-1-git-send-email-alexandre.f.demers@gmail.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Bryan O'Donoghue authored
commit 38a1dfda upstream. Commit 0dbc6078 ('x86, build, pci: Fix PCI_MSI build on !SMP') introduced the dependency that X86_UP_APIC is only available when PCI_MSI is false. This effectively prevents PCI_MSI support on 32bit UP systems because it disables both APIC and IO-APIC. But APIC support is architecturally required for PCI_MSI. The intention of the patch was to enforce APIC support when PCI_MSI is enabled, but failed to do so. Remove the !PCI_MSI dependency from X86_UP_APIC and enforce X86_UP_APIC when PCI_MSI support is enabled on 32bit UP systems. [ tglx: Massaged changelog ] Fixes 0dbc6078 'x86, build, pci: Fix PCI_MSI build on !SMP' Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: http://lkml.kernel.org/r/1421967529-9037-1-git-send-email-pure.logic@nexus-software.ieSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Andy Lutomirski authored
commit 3669ef9f upstream. The Witcher 2 did something like this to allocate a TLS segment index: struct user_desc u_info; bzero(&u_info, sizeof(u_info)); u_info.entry_number = (uint32_t)-1; syscall(SYS_set_thread_area, &u_info); Strictly speaking, this code was never correct. It should have set read_exec_only and seg_not_present to 1 to indicate that it wanted to find a free slot without putting anything there, or it should have put something sensible in the TLS slot if it wanted to allocate a TLS entry for real. The actual effect of this code was to allocate a bogus segment that could be used to exploit espfix. The set_thread_area hardening patches changed the behavior, causing set_thread_area to return -EINVAL and crashing the game. This changes set_thread_area to interpret this as a request to find a free slot and to leave it empty, which isn't *quite* what the game expects but should be close enough to keep it working. In particular, using the code above to allocate two segments will allocate the same segment both times. According to FrostbittenKing on Github, this fixes The Witcher 2. If this somehow still causes problems, we could instead allocate a limit==0 32-bit data segment, but that seems rather ugly to me. Fixes: 41bdc785 x86/tls: Validate TLS entries to protect espfix Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/0cb251abe1ff0958b8e468a9a9a905b80ae3a746.1421954363.git.luto@amacapital.netSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-
Andy Lutomirski authored
commit e30ab185 upstream. 32-bit programs don't have an lm bit in their ABI, so they can't reliably cause LDT_empty to return true without resorting to memset. They shouldn't need to do this. This should fix a longstanding, if minor, issue in all 64-bit kernels as well as a potential regression in the TLS hardening code. Fixes: 41bdc785 x86/tls: Validate TLS entries to protect espfix Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/72a059de55e86ad5e2935c80aa91880ddf19d07c.1421954363.git.luto@amacapital.netSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
-