- 11 Mar, 2022 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
net/dsa/dsa2.c commit afb3cc1a ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails") commit e83d5653 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master") https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/ drivers/net/ethernet/intel/ice/ice.h commit 97b01291 ("ice: Fix error with handling of bonding MTU") commit 43113ff7 ("ice: add TTY for GNSS module for E810T device") https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/ drivers/staging/gdm724x/gdm_lte.c commit fc7f750d ("staging: gdm724x: fix use after free in gdm_lte_rx()") commit 4bcc4249 ("staging: Use netif_rx().") https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, and ipsec. Current release - regressions: - Bluetooth: fix unbalanced unlock in set_device_flags() - Bluetooth: fix not processing all entries on cmd_sync_work, make connect with qualcomm and intel adapters reliable - Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0" - xdp: xdp_mem_allocator can be NULL in trace_mem_connect() - eth: ice: fix race condition and deadlock during interface enslave Current release - new code bugs: - tipc: fix incorrect order of state message data sanity check Previous releases - regressions: - esp: fix possible buffer overflow in ESP transformation - dsa: unlock the rtnl_mutex when dsa_master_setup() fails - phy: meson-gxl: fix interrupt handling in forced mode - smsc95xx: ignore -ENODEV errors when device is unplugged Previous releases - always broken: - xfrm: fix tunnel mode fragmentation behavior - esp: fix inter address family tunneling on GSO - tipc: fix null-deref due to race when enabling bearer - sctp: fix kernel-infoleak for SCTP sockets - eth: macb: fix lost RX packet wakeup race in NAPI receive - eth: intel stop disabling VFs due to PF error responses - eth: bcmgenet: don't claim WOL when its not available" * tag 'net-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits) xdp: xdp_mem_allocator can be NULL in trace_mem_connect(). ice: Fix race condition during interface enslave net: phy: meson-gxl: improve link-up behavior net: bcmgenet: Don't claim WOL when its not available net: arc_emac: Fix use after free in arc_mdio_probe() sctp: fix kernel-infoleak for SCTP sockets net: phy: correct spelling error of media in documentation net: phy: DP83822: clear MISR2 register to disable interrupts gianfar: ethtool: Fix refcount leak in gfar_get_ts_info selftests: pmtu.sh: Kill nettest processes launched in subshell. selftests: pmtu.sh: Kill tcpdump processes launched by subshell. NFC: port100: fix use-after-free in port100_send_complete net/mlx5e: SHAMPO, reduce TIR indication net/mlx5e: Lag, Only handle events from highest priority multipath entry net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE net/mlx5: Fix a race on command flush flow net/mlx5: Fix size field in bufferx_reg struct ax25: Fix NULL pointer dereference in ax25_kill_by_device net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr net: ethernet: lpc_eth: Handle error for clk_enable ... -
Sebastian Andrzej Siewior authored
Since the commit mentioned below __xdp_reg_mem_model() can return a NULL pointer. This pointer is dereferenced in trace_mem_connect() which leads to segfault. The trace points (mem_connect + mem_disconnect) were put in place to pair connect/disconnect using the IDs. The ID is only assigned if __xdp_reg_mem_model() does not return NULL. That connect trace point is of no use if there is no ID. Skip that connect trace point if xdp_alloc is NULL. [ Toke Høiland-Jørgensen delivered the reasoning for skipping the trace point ] Fixes: 4a48ef70 ("xdp: Allow registering memory model without rxq reference") Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/YikmmXsffE+QajTB@linutronix.deSigned-off-by:
-
- 10 Mar, 2022 37 commits
-
-
Ivan Vecera authored
Commit 5dbbbd01 ("ice: Avoid RTNL lock when re-creating auxiliary device") changes a process of re-creation of aux device so ice_plug_aux_dev() is called from ice_service_task() context. This unfortunately opens a race window that can result in dead-lock when interface has left LAG and immediately enters LAG again. Reproducer: ``` #!/bin/sh ip link add lag0 type bond mode 1 miimon 100 ip link set lag0 for n in {1..10}; do echo Cycle: $n ip link set ens7f0 master lag0 sleep 1 ip link set ens7f0 nomaster done ``` This results in: [20976.208697] Workqueue: ice ice_service_task [ice] [20976.213422] Call Trace: [20976.215871] __schedule+0x2d1/0x830 [20976.219364] schedule+0x35/0xa0 [20976.222510] schedule_preempt_disabled+0xa/0x10 [20976.227043] __mutex_lock.isra.7+0x310/0x420 [20976.235071] enum_all_gids_of_dev_cb+0x1c/0x100 [ib_core] [20976.251215] ib_enum_roce_netdev+0xa4/0xe0 [ib_core] [20976.256192] ib_cache_setup_one+0x33/0xa0 [ib_core] [20976.261079] ib_register_device+0x40d/0x580 [ib_core] [20976.266139] irdma_ib_register_device+0x129/0x250 [irdma] [20976.281409] irdma_probe+0x2c1/0x360 [irdma] [20976.285691] auxiliary_bus_probe+0x45/0x70 [20976.289790] really_probe+0x1f2/0x480 [20976.298509] driver_probe_device+0x49/0xc0 [20976.302609] bus_for_each_drv+0x79/0xc0 [20976.306448] __device_attach+0xdc/0x160 [20976.310286] bus_probe_device+0x9d/0xb0 [20976.314128] device_add+0x43c/0x890 [20976.321287] __auxiliary_device_add+0x43/0x60 [20976.325644] ice_plug_aux_dev+0xb2/0x100 [ice] [20976.330109] ice_service_task+0xd0c/0xed0 [ice] [20976.342591] process_one_work+0x1a7/0x360 [20976.350536] worker_thread+0x30/0x390 [20976.358128] kthread+0x10a/0x120 [20976.365547] ret_from_fork+0x1f/0x40 ... [20976.438030] task:ip state:D stack: 0 pid:213658 ppid:213627 flags:0x00004084 [20976.446469] Call Trace: [20976.448921] __schedule+0x2d1/0x830 [20976.452414] schedule+0x35/0xa0 [20976.455559] schedule_preempt_disabled+0xa/0x10 [20976.460090] __mutex_lock.isra.7+0x310/0x420 [20976.464364] device_del+0x36/0x3c0 [20976.467772] ice_unplug_aux_dev+0x1a/0x40 [ice] [20976.472313] ice_lag_event_handler+0x2a2/0x520 [ice] [20976.477288] notifier_call_chain+0x47/0x70 [20976.481386] __netdev_upper_dev_link+0x18b/0x280 [20976.489845] bond_enslave+0xe05/0x1790 [bonding] [20976.494475] do_setlink+0x336/0xf50 [20976.502517] __rtnl_newlink+0x529/0x8b0 [20976.543441] rtnl_newlink+0x43/0x60 [20976.546934] rtnetlink_rcv_msg+0x2b1/0x360 [20976.559238] netlink_rcv_skb+0x4c/0x120 [20976.563079] netlink_unicast+0x196/0x230 [20976.567005] netlink_sendmsg+0x204/0x3d0 [20976.570930] sock_sendmsg+0x4c/0x50 [20976.574423] ____sys_sendmsg+0x1eb/0x250 [20976.586807] ___sys_sendmsg+0x7c/0xc0 [20976.606353] __sys_sendmsg+0x57/0xa0 [20976.609930] do_syscall_64+0x5b/0x1a0 [20976.613598] entry_SYSCALL_64_after_hwframe+0x65/0xca 1. Command 'ip link ... set nomaster' causes that ice_plug_aux_dev() is called from ice_service_task() context, aux device is created and associated device->lock is taken. 2. Command 'ip link ... set master...' calls ice's notifier under RTNL lock and that notifier calls ice_unplug_aux_dev(). That function tries to take aux device->lock but this is already taken by ice_plug_aux_dev() in step 1 3. Later ice_plug_aux_dev() tries to take RTNL lock but this is already taken in step 2 4. Dead-lock The patch fixes this issue by following changes: - Bit ICE_FLAG_PLUG_AUX_DEV is kept to be set during ice_plug_aux_dev() call in ice_service_task() - The bit is checked in ice_clear_rdma_cap() and only if it is not set then ice_unplug_aux_dev() is called. If it is set (in other words plugging of aux device was requested and ice_plug_aux_dev() is potentially running) then the function only clears the bit - Once ice_plug_aux_dev() call (in ice_service_task) is finished the bit ICE_FLAG_PLUG_AUX_DEV is cleared but it is also checked whether it was already cleared by ice_clear_rdma_cap(). If so then aux device is unplugged. Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Co-developed-by:
Petr Oros <poros@redhat.com> Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Link: https://lore.kernel.org/r/20220310171641.3863659-1-ivecera@redhat.comSigned-off-by:
-
Heiner Kallweit authored
Sometimes the link comes up but no data flows. This patch fixes this behavior. It's not clear what's the root cause of the issue. According to the tests one other link-up issue remains. In very rare cases the link isn't even reported as up. Fixes: 84c8f773 ("net: phy: meson-gxl: remove the use of .ack_callback()") Tested-by:
Erico Nunes <nunes.erico@gmail.com> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/e3473452-a1f9-efcf-5fdd-02b6f44c3fcd@gmail.comSigned-off-by:
-
Jeremy Linton authored
Some of the bcmgenet platforms don't correctly support WOL, yet ethtool returns: "Supports Wake-on: gsf" which is false. Ideally if there isn't a wol_irq, or there is something else that keeps the device from being able to wakeup it should display: "Supports Wake-on: d" This patch checks whether the device can wakup, before using the hard-coded supported flags. This corrects the ethtool reporting, as well as the WOL configuration because ethtool verifies that the mode is supported before attempting it. Fixes: c51de7f3 ("net: bcmgenet: add Wake-on-LAN support code") Signed-off-by:
Jeremy Linton <jeremy.linton@arm.com> Tested-by:
Peter Robinson <pbrobinson@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220310045535.224450-1-jeremy.linton@arm.comSigned-off-by:
-
Jianglei Nie authored
If bus->state is equal to MDIOBUS_ALLOCATED, mdiobus_free(bus) will free the "bus". But bus->name is still used in the next line, which will lead to a use after free. We can fix it by putting the name in a local variable and make the bus->name point to the rodata section "name",then use the name in the error message without referring to bus to avoid the uaf. Fixes: 95b5fc03 ("net: arc_emac: Make use of the helper function dev_err_probe()") Signed-off-by:
Jianglei Nie <niejianglei2021@163.com> Link: https://lore.kernel.org/r/20220309121824.36529-1-niejianglei2021@163.comSigned-off-by:
-
Eric Dumazet authored
syzbot reported a kernel infoleak [1] of 4 bytes. After analysis, it turned out r->idiag_expires is not initialized if inet_sctp_diag_fill() calls inet_diag_msg_common_fill() Make sure to clear idiag_timer/idiag_retrans/idiag_expires and let inet_diag_msg_sctpasoc_fill() fill them again if needed. [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:154 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668 instrument_copy_to_user include/linux/instrumented.h:121 [inline] copyout lib/iov_iter.c:154 [inline] _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668 copy_to_iter include/linux/uio.h:162 [inline] simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519 __skb_datagram_iter+0x2d5/0x11b0 net/core/datagram.c:425 skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533 skb_copy_datagram_msg include/linux/skbuff.h:3696 [inline] netlink_recvmsg+0x669/0x1c80 net/netlink/af_netlink.c:1977 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] __sys_recvfrom+0x795/0xa10 net/socket.c:2097 __do_sys_recvfrom net/socket.c:2115 [inline] __se_sys_recvfrom net/socket.c:2111 [inline] __x64_sys_recvfrom+0x19d/0x210 net/socket.c:2111 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3247 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4975 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1158 [inline] netlink_dump+0x3e5/0x16c0 net/netlink/af_netlink.c:2248 __netlink_dump_start+0xcf8/0xe90 net/netlink/af_netlink.c:2373 netlink_dump_start include/linux/netlink.h:254 [inline] inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1341 sock_diag_rcv_msg+0x24a/0x620 netlink_rcv_skb+0x40c/0x7e0 net/netlink/af_netlink.c:2494 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:277 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x1093/0x1360 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x14d9/0x1720 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] sock_write_iter+0x594/0x690 net/socket.c:1061 do_iter_readv_writev+0xa7f/0xc70 do_iter_write+0x52c/0x1500 fs/read_write.c:851 vfs_writev fs/read_write.c:924 [inline] do_writev+0x645/0xe00 fs/read_write.c:967 __do_sys_writev fs/read_write.c:1040 [inline] __se_sys_writev fs/read_write.c:1037 [inline] __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Bytes 68-71 of 2508 are uninitialized Memory access of size 2508 starts at ffff888114f9b000 Data copied to user address 00007f7fe09ff2e0 CPU: 1 PID: 3478 Comm: syz-executor306 Not tainted 5.17.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 8f840e47 ("sctp: add the sctp_diag.c file") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/20220310001145.297371-1-eric.dumazet@gmail.comSigned-off-by:
-
Colin Foster authored
The header file incorrectly referenced "median-independant interface" instead of media. Correct this typo. Signed-off-by:
Colin Foster <colin.foster@in-advantage.com> Fixes: 4069a572 ("net: phy: Document core PHY structures") Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220309062544.3073-1-colin.foster@in-advantage.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5-updates-2022-03-09 1) Remove kernel log prints on FW events regarding FW pages management and replace that with debugfs entries to track FW pages management commands failures and general stats, we do that for all FW commands in general since it's the same effort to do so under the already existing debugfs entry for FW commands. 2) Add support for ConnectX-7 Software managed steering, in other words STEv2 which shares a lot in common with STE V1, the difference is in specific offsets in the devices, the logic is almost the same, thus we implement STEv1 and STEv2 in the same file. * tag 'mlx5-updates-2022-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: DR, Add support for ConnectX-7 steering net/mlx5: DR, Refactor ste_ctx handling for STE v0/1 net/mlx5: DR, Rename action modify fields to reflect naming in HW spec net/mlx5: DR, Fix handling of different actions on the same STE in STEv1 net/mlx5: DR, Remove unneeded comments net/mlx5: DR, Add support for matching on Internet Header Length (IHL) net/mlx5: DR, Align mlx5dv_dr API vport action with FW behavior net/mlx5: Add debugfs counters for page commands failures net/mlx5: Add pages debugfs net/mlx5: Move debugfs entries to separate struct net/mlx5: Change release_all_pages cap bit location net/mlx5: Remove redundant error on reclaim pages net/mlx5: Remove redundant error on give pages net/mlx5: Remove redundant notify fail on give pages net/mlx5: Add command failures data to debugfs net/mlx5e: TC, Fix use after free in mlx5e_clone_flow_attr_for_post_act() ==================== Link: https://lore.kernel.org/r/20220309213755.610202-1-saeed@kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2022-03-09 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2022-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: SHAMPO, reduce TIR indication net/mlx5e: Lag, Only handle events from highest priority multipath entry net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE net/mlx5: Fix a race on command flush flow net/mlx5: Fix size field in bufferx_reg struct ==================== Link: https://lore.kernel.org/r/20220309201517.589132-1-saeed@kernel.orgSigned-off-by:
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fix from Jens Axboe: "Just a single fix for a regression that occured in this merge window" * tag 'block-5.17-2022-03-10' of git://git.kernel.dk/linux-block: block: fix blk_mq_attempt_bio_merge and rq_qos_throttle protection
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are three small fixes for staging drivers for 5.17-rc8 or -final, which ever comes next. They resolve some reported problems: - rtl8723bs wifi driver deadlock fix for reported problem that is a revert of a previous patch. Also a documentation fix is added so that the same problem hopefully can not come back again. - gdm724x driver use-after-free fix for a reported problem. All of these have been in linux-next for a while with no reported problems" * tag 'staging-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8723bs: Improve the comment explaining the locking rules staging: rtl8723bs: Fix access-point mode deadlock staging: gdm724x: fix use after free in gdm_lte_rx() -
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: selftests: Refactor join tests The mptcp_join.sh selftest is the largest and most complex self test for MPTCP, and it is frequently used by MPTCP developers to reproduce bugs and verify fixes. As it grew in size and execution time, it became more cumbersome to use. These changes do some much-needed cleanup, and add developer-friendly features to make it easier to see failures and run a subset of the tests when verifying fixes. ==================== Link: https://lore.kernel.org/r/20220309191636.258232-1-mathew.j.martineau@linux.intel.comSigned-off-by:
-
Matthieu Baerts authored
This fixes a few issues reported by ShellCheck: - SC2068: Double quote array expansions to avoid re-splitting elements. - SC2206: Quote to prevent word splitting/globbing, or split robustly with mapfile or read -a. - SC2166: Prefer [ p ] && [ q ] as [ p -a q ] is not well defined. - SC2155: Declare and assign separately to avoid masking return values. - SC2162: read without -r will mangle backslashes. - SC2219: Instead of 'let expr', prefer (( expr )) . - SC2181: Check exit code directly with e.g. 'if mycmd;', not indirectly with $?. - SC2236: Use -n instead of ! -z. - SC2004: $/${} is unnecessary on arithmetic variables. - SC2012: Use find instead of ls to better handle non-alphanumeric filenames. - SC2002: Useless cat. Consider 'cmd < file | ..' or 'cmd file | ..' instead. SC2086 (Double quotes to prevent globbing and word splitting) is ignored because it is controlled for the moment and there are too many to change. While at it, also fixed the alignment in one comment. Signed-off-by:Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Matthieu Baerts authored
As explained on ShellCheck's wiki [1], it is recommended to avoid backquotes `...` in favour of parenthesis $(...): > Backtick command substitution `...` is legacy syntax with several > issues. > > - It has a series of undefined behaviors related to quoting in POSIX. > - It imposes a custom escaping mode with surprising results. > - It's exceptionally hard to nest. > > $(...) command substitution has none of these problems, and is > therefore strongly encouraged. [1] https://www.shellcheck.net/wiki/SC2006Signed-off-by:
-
Matthieu Baerts authored
Some vars are redefined in different places. Best to avoid this classical Bash pitfall where variables are accidentally overridden by other functions because the proper scope has not been defined. Most issues are with loops: typically 'i' is used in for-loops but if it is not global, calling a function from a for-loop also doing a for-loop with the same non local 'i' variable causes troubles because the first 'i' will be assigned to another value. To prevent such issues, the iterator variable is now declared as local just before the loop. If it is always done like this, issues are avoided. To distinct between local and non local variables, all non local ones are defined at the beginning of the script. The others are now defined with the "local" keyword. Signed-off-by:
-
Matthieu Baerts authored
This is more readable and reduces duplicated commands. This might also be useful to add v6 support and switch to nftables. Signed-off-by:
-
Matthieu Baerts authored
With ~100 tests, it helps to have this summary at the end not to scroll to find which one has failed. It is especially interseting when looking at the output produced by the CI where the kernel logs from the serial are mixed together. Signed-off-by:
-
Matthieu Baerts authored
Running a specific test by giving the ID is often what we want: the CI reports an issue with the Nth test, it is reproducible with: ./mptcp_join.sh N But this might not work when there is a need to find which commit has introduced a regression making a test unstable: failing from time to time. Indeed, a specific test is not attached to one ID: the ID is in fact a counter. It means the same test can have a different ID if other tests have been added/removed before this unstable one. Remembering the current test can also help listing failed tests at the end. Signed-off-by:
-
Matthieu Baerts authored
Often, it is needed to run one specific test. There are options to run subgroups of tests but when only one fails, no need to run all the subgroup. So far, the solution was to edit the script to comment the tests that are not needed but that's not ideal. Now, it is possible to run one specific test by giving the ID of the tests that are going to be validated, e.g. ./mptcp_join.sh 36 37 This is cleaner and saves time. Technically, the reset* functions now return 0 if the test can be executed. This naturally creates sections per test in the code which is also helpful to understand what a test is exactly doing. Suggested-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Matthieu Baerts authored
Best to always reset this env var before each test to avoid surprising behaviour depending on the order tests are running. Also clearly set it for the last failing links test is also needed when only this test is executed. Signed-off-by:
-
Matthieu Baerts authored
When adding a new tests group, it has to be defined in multiple places: - in the all_tests() function - in the 'usage()' function - in the getopts: short option + what to do when the option is used Because it is easy to forget one of them, it is useful to have to define them only once. Note: only using an associative array would simplify the code but the entries are stored in a hashtable and iterating over the different items doesn't give the same order as the one used in the declaration of this array. Because we want to run these tests in the same order as before, a "simple" array is used first. Signed-off-by:
-
Geliang Tang authored
This patch dropped the msg argument of chk_csum_nr, to unify chk_csum_nr with other chk_*_nr functions. Reviewed-by:
Geliang Tang <geliang.tang@suse.com> Signed-off-by:
-
Clément Léger authored
MISR1 was cleared twice but the original author intention was probably to clear MISR1 & MISR2 to completely disable interrupts. Fix it to clear MISR2. Fixes: 87461f7a ("net: phy: DP83822 initial driver submission") Signed-off-by:
Clément Léger <clement.leger@bootlin.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
Miaoqian Lin authored
The of_find_compatible_node() function returns a node pointer with refcount incremented, We should use of_node_put() on it when done Add the missing of_node_put() to release the refcount. Fixes: 7349a74e ("net: ethernet: gianfar_ethtool: get phc index through drvdata") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20220310015313.14938-1-linmq006@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "Here is a third set of fixes for the soc tree, well within the expected set of changes. Maintainer list changes: - Krzysztof Kozlowski and Jisheng Zhang both have new email addresses - Broadcom iProc has a new git tree Regressions: - Robert Foss sends a revert for a Mediatek DPI bridge patch that caused an inadvertent break in the DT binding - mstar timers need to be included in Kconfig Devicetree fixes for: - Aspeed ast2600 spi pinmux - Tegra eDP panels on Nyan FHD - Tegra display IOMMU - Qualcomm sm8350 UFS clocks - minor DT changes for Marvell Armada, Qualcomm sdx65, Qualcomm sm8450, and Broadcom BCM2711" * tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0 MAINTAINERS: Update Jisheng's email address Revert "arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint" dt-bindings: drm/bridge: anx7625: Revert DPI support ARM: dts: aspeed: Fix AST2600 quad spi group MAINTAINERS: update Krzysztof Kozlowski's email MAINTAINERS: Update git tree for Broadcom iProc SoCs ARM: tegra: Move Nyan FHD panels to AUX bus arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias ARM: mstar: Select HAVE_ARM_ARCH_TIMER soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint ARM: boot: dts: bcm2711: Fix HVS register range arm64: dts: qcom: c630: disable crypto due to serror arm64: dts: qcom: sm8450: fix apps_smmu interrupts arm64: dts: qcom: sm8450: enable GCC_USB3_0_CLKREF_EN for usb arm64: dts: qcom: sm8350: Correct UFS symbol clocks arm64: tegra: Disable ISO SMMU for Tegra194 Revert "dt-bindings: arm: qcom: Document SDX65 platform and boards" -
Linus Torvalds authored
Instead of using GUP, make fault_in_safe_writeable() actually force a 'handle_mm_fault()' using the same fixup_user_fault() machinery that futexes already use. Using the GUP machinery meant that fault_in_safe_writeable() did not do everything that a real fault would do, ranging from not auto-expanding the stack segment, to not updating accessed or dirty flags in the page tables (GUP sets those flags on the pages themselves). The latter causes problems on architectures (like s390) that do accessed bit handling in software, which meant that fault_in_safe_writeable() didn't actually do all the fault handling it needed to, and trying to access the user address afterwards would still cause faults. Reported-and-tested-by:
Andreas Gruenbacher <agruenba@redhat.com> Fixes: cdd591fc ("iov_iter: Introduce fault_in_iov_iter_writeable") Link: https://lore.kernel.org/all/CAHc6FU5nP+nziNGG0JAF1FUx-GV7kKFvM7aZuU_XD2_1v4vnvg@mail.gmail.com/Acked-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Arnd Bergmann authored
Merge tag 'mvebu-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes mvebu fixes for 5.17 (part 2) Allow using old PCIe card on Armada 37xx * tag 'mvebu-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0 Link: https://lore.kernel.org/r/87bkydj4fn.fsf@BL-laptopSigned-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Pali Rohár authored
Legacy and old PCI I/O based cards do not support 32-bit I/O addressing. Since commit 64f160e1 ("PCI: aardvark: Configure PCIe resources from 'ranges' DT property") kernel can set different PCIe address on CPU and different on the bus for the one A37xx address mapping without any firmware support in case the bus address does not conflict with other A37xx mapping. So remap I/O space to the bus address 0x0 to enable support for old legacy I/O port based cards which have hardcoded I/O ports in low address space. Note that DDR on A37xx is mapped to bus address 0x0. And mapping of I/O space can be set to address 0x0 too because MEM space and I/O space are separate and so do not conflict. Remapping IO space on Turris Mox to different address is not possible to due bootloader bug. Signed-off-by:
Pali Rohár <pali@kernel.org> Reported-by:
Gregory CLEMENT <gregory.clement@bootlin.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fix from Mark Brown: "One fix for type conversion issues when working out maximum scatter/gather segment sizes. It caused problems for some systems where the limits overflow due to the type conversion" * tag 'spi-fix-v5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: Fix invalid sgs value
-
Russell King (Oracle) authored
The kernel test robot discovered that building without HARDEN_BRANCH_PREDICTOR issues a warning due to a missing argument to pr_info(). Add the missing argument. Reported-by:
kernel test robot <lkp@intel.com> Fixes: 9dd78194 ("ARM: report Spectre v2 status through sysfs") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds authored
Pull gpio fixes from Bartosz Golaszewski: - fix a probe failure for Tegra241 GPIO controller in gpio-tegra186 - revert changes that caused a regression in the sysfs user-space interface - correct the debounce time conversion in GPIO ACPI - statify a struct in gpio-sim and fix a typo - update registers in correct order (hardware quirk) in gpio-ts4900 * tag 'gpio-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: sim: fix a typo gpio: ts4900: Do not set DAT and OE together gpio: sim: Declare gpio_sim_hog_config_item_ops static gpiolib: acpi: Convert ACPI value of debounce to microseconds gpio: Revert regression in sysfs-gpio (gpiolib.c) gpio: tegra186: Add IRQ per bank for Tegra241
-
Bartosz Golaszewski authored
Just noticed this when applying Andy's patch. s/childred/children/ Fixes: cb8c474e ("gpio: sim: new testing module") Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
Mark Featherston authored
This works around an issue with the hardware where both OE and DAT are exposed in the same register. If both are updated simultaneously, the harware makes no guarantees that OE or DAT will actually change in any given order and may result in a glitch of a few ns on a GPIO pin when changing direction and value in a single write. Setting direction to input now only affects OE bit. Setting direction to output updates DAT first, then OE. Fixes: 9c668632 ("gpio: add Technologic I2C-FPGA gpio support") Signed-off-by:
Mark Featherston <mark@embeddedTS.com> Signed-off-by:
Kris Bahnsen <kris@embeddedTS.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "One more small batch of clk driver fixes: - A fix for the Qualcomm GDSC power domain delays that avoids black screens at boot on some more recent SoCs that use a different delay than the hard-coded delays in the driver. - A build fix LAN966X clk driver that let it be built on architectures that didn't have IOMEM" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: lan966x: Fix linking error clk: qcom: dispcc: Update the transition delay for MDSS GDSC clk: qcom: gdsc: Add support to update GDSC transition delay -
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "Several Linux PV device frontends are using the grant table interfaces for removing access rights of the backends in ways being subject to race conditions, resulting in potential data leaks, data corruption by malicious backends, and denial of service triggered by malicious backends: - blkfront, netfront, scsifront and the gntalloc driver are testing whether a grant reference is still in use. If this is not the case, they assume that a following removal of the granted access will always succeed, which is not true in case the backend has mapped the granted page between those two operations. As a result the backend can keep access to the memory page of the guest no matter how the page will be used after the frontend I/O has finished. The xenbus driver has a similar problem, as it doesn't check the success of removing the granted access of a shared ring buffer. - blkfront, netfront, scsifront, usbfront, dmabuf, xenbus, 9p, kbdfront, and pvcalls are using a functionality to delay freeing a grant reference until it is no longer in use, but the freeing of the related data page is not synchronized with dropping the granted access. As a result the backend can keep access to the memory page even after it has been freed and then re-used for a different purpose. - netfront will fail a BUG_ON() assertion if it fails to revoke access in the rx path. This will result in a Denial of Service (DoS) situation of the guest which can be triggered by the backend" * tag 'xsa396-5.17-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/netfront: react properly to failing gnttab_end_foreign_access_ref() xen/gnttab: fix gnttab_end_foreign_access() without page specified xen/pvcalls: use alloc/free_pages_exact() xen/9p: use alloc/free_pages_exact() xen/usb: don't use gnttab_end_foreign_access() in xenhcd_gnttab_done() xen: remove gnttab_query_foreign_access() xen/gntalloc: don't use gnttab_query_foreign_access() xen/scsifront: don't use gnttab_query_foreign_access() for mapped status xen/netfront: don't use gnttab_query_foreign_access() for mapped status xen/blkfront: don't use gnttab_query_foreign_access() for mapped status xen/grant-table: add gnttab_try_end_foreign_access() xen/xenbus: don't let xenbus_grant_ring() remove grants in error case -
Luiz Angelo Daros de Luca authored
DSA_TAG_PROTO_RTL8_4L is not defined. It should be DSA_TAG_PROTO_RTL8_4T. Fixes: cd87fecd ("net: dsa: tag_rtl8_4: add rtl8_4t trailing variant") Reported-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by:
Luiz Angelo Daros de Luca <luizluca@gmail.com> Reviewed-by:
-
Jakub Kicinski authored
Guillaume Nault says: ==================== selftests: pmtu.sh: Fix cleanup of processes launched in subshell. Depending on the options used, pmtu.sh may launch tcpdump and nettest processes in the background. However it fails to clean them up after the tests complete. Patch 1 allows the cleanup() function to read the list of PIDs launched by the tests. Patch 2 fixes the way the nettest PIDs are retrieved. ==================== Link: https://lore.kernel.org/r/cover.1646776561.git.gnault@redhat.comSigned-off-by:
-
Guillaume Nault authored
When using "run_cmd <command> &", then "$!" refers to the PID of the subshell used to run <command>, not the command itself. Therefore nettest_pids actually doesn't contain the list of the nettest commands running in the background. So cleanup() can't kill them and the nettest processes run until completion (fortunately they have a 5s timeout). Fix this by defining a new command for running processes in the background, for which "$!" really refers to the PID of the command run. Also, double quote variables on the modified lines, to avoid shellcheck warnings. Fixes: ece1278a ("selftests: net: add ESP-in-UDP PMTU test") Signed-off-by:
Guillaume Nault <gnault@redhat.com> Reviewed-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
