drivers/ide/ide-acpi.c: In function 'ide_acpi_get_timing':
drivers/ide/ide-acpi.c:537: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'long unsigned int'
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This patch implements ACPI integration for generic IDE devices.
The ACPI spec mandates that some methods are called during suspend and
resume. And consequently there most modern Laptops cannot resume
properly without it.

According to the spec, we should call '_GTM' (Get Timing) upon suspend
to store the current IDE adapter settings.
Upon resume we should call '_STM' (Set Timing) to initialize the
adapter with the stored settings; afterwards '_GTF' (Get Taskfile)
should be called which returns a buffer with some IDE initialisation
commands. Those commands should be passed to the drive.

There are two module params which control the behaviour of this patch:

'ide=noacpi'
	Do not call any ACPI methods (Disables any ACPI method calls)
'ide=acpigtf'
	Enable execution of _GTF methods upon resume.
	Has no effect if 'ide=noacpi' is set.
'ide=acpionboot'
	Enable execution of ACPI methods during boot.
	This might be required on some machines if 'ide=acpigtf' is
	selected as some machines modify the _GTF information
	depending on the drive identification passed down with _STM.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

On Thursday 11 January 2007 23:17, Bartlomiej Zolnierkiewicz wrote:
> 
> My working IDE tree (against Linus' tree) now resides here:
> 
> 	http://kernel.org/pub/linux/kernel/people/bart/pata-2.6/patches/

Bart, here's a driver I've been keeping out-of-tree for the past couple
of years.  This is for the Delking/Lexar/ASKA/etc.. 32-bit cardbus IDE
CompactFlash adapter card.

It's probably way out of sync with the latest driver model (??), but it
still builds/works.  I'm not interested in doing much of a rewrite, other
than for libata someday, as I no longer use the card myself.

But lots of other people do seem to use it, so it might be nice to see it
"in-tree".
Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* set ATAPI/IORDY/TIME bits correctly in it8213_tuneproc()
* fix UDMA/MWDMA/SWDMA masks in it8213_init_hwif()
* in it8213_tune_chipset() SWDMA2 mode should be used instead of MWDMA0
* backport various fixes from piix/slc90e66 drivers:
  - in it8213_tuneproc() the highest possible PIO mode is PIO4 (not PIO5)
  - clear ATAPI/IORDY/TIME bits before setting them also for slave device
  - use ->speedproc in it8213_config_drive_for_dma()
  - don't try to tune PIO in config_chipset_for_pio()
  - simplify is_slave calculation in it8213_tuneproc()
  - misc cleanups
* fix it8213_ratemask() and it8213_tuneproc() comments
* simplify it8213_init_hwif()
* remove init_chipset_it8213()
* add missing Copyrights and update MODULE_AUTHOR()
* CodingStyle cleanups
* remove dead code

v2:
* PCI_DEVICE_ID_ITE_8213 is only defined in -mm kernels,
  so just use PCI Device ID (0x8213) directly
* fix ->ultra_mask incorrectly changed to 0x3f in v1 version of the patch
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This is the driver for the Toshiba TC86C001 GOKU-S PCI IDE controller,
completely reworked from the original brain-damaged Toshiba's 2.4 version.

This single channel UltraDMA/66 controller is very simple in programming,
yet Toshiba managed to plant many interesting bugs in it.  The particularly
nasty "limitation 5" (as they call the errata) caused me to abuse the IDE
core in a possibly most interesting way so far.  However, this is still
better than the #ifdef mess in drivers/ide/ide-io.c that the original
version included (well, it had much more mess)...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Alan Cox <alan@redhat.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fold check_in_drive_lists() into quirkproc() handler in both PDC202xx
drivers-- this function was never called with a list other than
pdc_quirk_drives and was a bad example of code overall...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove the following useless fragments from the driver:

- the ide_dma_lostirq() and ide_dma_timeout() handlers which boil down to just
  printing the incoherent reset message and calling their default counterparts;

- check for non-NULL drive->id in the ide_dma_check() handler -- this is assumed
  to be true by all other handlers (also, get rid of unnecessary nesting of the
  conditional statements there);

- the comment before pdcnew_tune_drive() which has nothing to do with the code.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Synchronize with version 0.46 of the Intel PIIX/ICH driver:

- carry over Alan's and my own fixes in the tuneproc() method and my cleanups
  both there and in the ratemask() method;

- SLC90E66 only supports MW DMA modes 1/2 and SW DMA mode 2 (just like Intel
  chips), so don't claim support for other MW/SW DMA modes;

- don't check dor non-NULL drive->id in the ide_dma_check() method -- this is
  assumed to be true in all other drivers;

- do some coding/formatting cleanups while at it...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix/cleanup the driver's tuneproc() and ratemask() methods:

- PPE, IE, and TIME bits need to be cleared beforehand for the slave drive as
  well as master (Alan probably just forgot about it);

- this driver only supports PIO modes up to 4, so must pass the correct limit
  to ide_get_best_pio_mode();

- use min_t() macro instead of min();

- simplify slave vs master drive evaluation;

- do come coding and formatting cleanups...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

According to the datasheet, Intel 82371MX (MPIIX) actually has only a
single IDE channel mapped to the primary or secondary ports depending on
the value of the bit 14 of the IDETIM register at PCI config.  offset 0x6C
(the register at 0x6F which the driver refers to.  doesn't exist).  So,
disguise the controller as dual channel and set enablebits masks/values
such that only either primary or secondary channel is detected enabled. 
Also, preclude the IDE probing code from reading PCI BARs, this controller
just doesn't have them (it's not the separate PCI function like the other
PCI controllers), it only decodes the legacy addresses.

[ Alan sayeth " MPIIX does not work with or without the change.  It needs its
  own different driver and not to use setup-pci.  Huge job and since it works
  well with libata who cares.  Ditto the early PIIX chip." ]
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix minor coding mistake in the HPT36x PCI clock detection code noticed by
Bartlomiej Zolnierkiewicz -- it always reported 33 MHz due to the missing
'break' statements.  This, however, most probably never mattered -- in fact, I
was thinking of removing the 25/40 MHz cases completely since HPT36x BIOSes
didn't seem to set any other value than 7 into the 'cmd_high_time' field, i.e.
 supported only 33 MHz PCI.

Note that in the original driver there was another bug: 25 and 40 MHz cases
were interchanged.  Since the 'cmd_high_time' field is in units of PCI clocks,
a lower clock count just *cannot* correspond to a higher frequency, i.  e.  it
should be 5 for 25 MHz PCI and 9 for 40 MHz PCI, not the other way around.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Finally, rework the driver init.  code to correctly handle all the chip
variants HighPoint has created so far.  This should cure the rest of the
timing issues in the driver (especially, on 66 MHz PCI) caused by the
HighPoint's habit of switching the base DPLL clock with every new revision
of the chips...

  - switch to using the enumeration type to differ between the numerous chip
    variants, matching PCI device/revision ID with the chip type early, at the
    init_setup stage;

  - extend the hpt_info structure to hold the DPLL and PCI clock frequencies,
    stop duplicating it for each channel by storing the pointer in the pci_dev
    structure: first, at the init_setup stage, point it to a static "template"
    with only the chip type and its specific base DPLL frequency, the highest
    supported DMA mode, and the chip settings table pointer filled, then, at
    the init_chipset stage, allocate per-chip instance  and fill it with the
    rest of the necessary information;

  - get rid of the constant thresholds in the HPT37x PCI clock detection code,
    switch  to calculating  PCI clock frequency based on the chip's base DPLL
    frequency;

  - switch to using the DPLL clock and enable UltraATA/133 mode by default on
    anything newer than HPT370/A;

  - fold PCI clock detection and DPLL setup code into init_chipset_hpt366(),
    unify the HPT36x/37x setup code and the speedproc handlers by joining the
    register setting lists into the table indexed by the clock selected;

  - add enablebits for all the chips to avoid touching disabled channels
    (though the HighPoint BIOS seem to only disable the primary one on
    HPT371/N);

  - separate the UltraDMA and MWDMA masks there to avoid changing PIO timings
    when setting an UltraDMA mode in hpt37x_tune_chipset().

This version has been tested on HPT370/302/371N.

Thanks to Alan for the inspiration. Hopefully, his libata driver will also
benefit from the work done on this "obsolete" driver...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Clean up DMA timeout handling for HPT370:

- hpt370_lostirq_timeout() cleared the DMA status which made __ide_dma_end()
   called afterwards return the incorrect result, and the DMA engine was reset
   both before and after stopping DMA while the HighPoint drivers only do it
   after (which seems logical) -- fix this and also rename the function;

- get rid of the needless mutual recursion in hpt370_ide_dma_end() and
   hpt370_ide_dma_timeout();

- get rid of hpt370_lostirq_timeout() since hwif->ide_dma_end() called from
   the driver's interrupt handler later does all its work.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Continue with the driver rewrite:

- move the interrupt twiddling code from the speedproc handlers into the
    init_hwif_hpt366 which allows to merge the two HPT37x speedproc handlers
    into one;

- get rid of in init_hpt366 which solely consists of the duplicate code, then
    fold init_hpt37x() into init_chipset_hpt366();

- fix hpt3xx_tune_drive() to always set the PIO mode requested, not the best
    possible one, change hpt366_config_drive_xfer_rate() accordingly, simplify
    it a bit;

- group all the DMA related code together init_hwif_hpt366(), and generally
    clean up and beautify it.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Begin the real driver redesign. For the starters:

- cache the offset of the IDE channel's MISC. control registers which are used
   throughout the driver in hwif->select_data;

- only touch the relevant MCR when detecting the cable type on HPT374's
   function 1;

- make HPT36x's speedproc handler look the same way as HPT37x ones; fix the
   PIO timing register mask for HPT37x.

- rename all the HPT3xx register related variables consistently; clean up the
   whitespace.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Switch to using pci_get_slot() to get to the function 1 of HPT36x/374 chips --
there's no need for the driver itself to walk the list of the PCI devices, and
it also forgets to check the bus number of the device found.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

- Rework the driver setup code so that it prefixes the driver startup
  messages with the real chip name.

- Print the measured f_CNT value and the DPLL setting for non-HPT3xx
  chips as well.

- Claim the extra 240 bytes of I/O space for all chips, not only for
  those having PCI device ID of 0x0004.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

- Rework hpt3xx_ratemask() and hpt3xx_ratefilter() so that the former
  returns the max.  mode computed at the load time and doesn't have to do
  bad Ultra33 drive list lookups anymore; remove the duplicate code from
  the latter function.  Move the quirky drive list lookup into
  hpt3xx_quirkproc() where it should have been from the start...

- Disable UltraATA/100 for HPT370 by default as the 33 MHz ATA clock
  being used does not allow for it, and this *greatly* increases the
  transfer speed.

- Save some space by using byte-wide fields in struct hpt_info; switch to
  reading the 8-bit PCI revision ID reg.  only, not the whole 32-bit reg.

- Start incrementing the driver version number with each patch (should
  have been done from the first one posted).
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (27 commits)
  [IA64] swiotlb abstraction (e.g. for Xen)
  [IA64] swiotlb cleanup
  [IA64] make swiotlb use bus_to_virt/virt_to_bus
  [IA64] swiotlb bug fixes
  [IA64] Hook up getcpu system call for IA64
  [IA64] clean up sparsemem memory_present call
  [IA64] show_mem() for IA64 sparsemem NUMA
  [IA64] missing exports hwsw_sync_...
  [IA64] virt_to_page() can be called with NULL arg
  [IA64] alignment bug in ldscript
  [IA64] register memory ranges in a consistent manner
  [IA64] Enable SWIOTLB only when needed
  [IA64-SGI] Check for TIO errors on shub2 Altix
  [IA64] remove bogus prototype ia64_esi_init()
  [IA64] Clear IRQ affinity when unregistered
  [IA64] fix ACPI Kconfig issues
  [IA64] Fix NULL-pointer dereference in ia64_machine_kexec()
  [IA64] find thread for user rbs address
  [IA64] use snprintf() on features field of /proc/cpuinfo
  [IA64] enable singlestep on system call
  ...

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: ocfs2_link() journal credits update

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid:
  USB HID: handle multi-interface devices for Apple macbook pro properly
  HID: move away from DEBUG defines in favor of CONFIG_HID_DEBUG
  USB HID: fix bogus comment in hid_get_class_descriptor()
  USB HID: remove hid_find_field_by_usage()
  HID: API - fix leftovers of hidinput API in USB HID
  HID: hid debug from hid-debug.h to hid layer
  hid: force feedback driver for PantherLord USB/PS2 2in1 Adapter
  hid: quirk for multi-input devices with unneeded output reports
  hid: allow force feedback for multi-input devices

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ehca: Remove obsolete prototypes
  IB/ehca: Remove use of do_mmap()
  RDMA/addr: Handle ethernet neighbour updates during route resolution
  IB: Make sure struct ib_user_mad.data is aligned
  IB/srp: Don't wait for response when QP is in error state.
  IB: Return qp pointer as part of ib_wc
  IB: Include <linux/kref.h> explicitly in <rdma/ib_verbs.h>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (32 commits)
  mmc: tifm: replace kmap with page_address
  mmc: sdhci: fix voltage ocr
  mmc: sdhci: replace kmap with page_address
  mmc: wbsd: replace kmap with page_address
  mmc: handle pci_enable_device() return value in sdhci
  mmc: Proper unclaim in mmc_block
  mmc: change wbsd mailing list
  mmc: Graceful fallback for fancy features
  mmc: Handle wbsd's stupid command list
  mmc: Allow host drivers to specify max block count
  mmc: Allow host drivers to specify a max block size
  tifm_sd: add suspend and resume functionality
  tifm_core: add suspend/resume infrastructure for tifm devices
  tifm_7xx1: prettify
  tifm_7xx1: recognize device 0xac8f as supported
  tifm_7xx1: switch from workqueue to kthread
  tifm_7xx1: Merge media insert and media remove functions
  tifm_7xx1: simplify eject function
  Add dummy_signal_irq function to save check in ISR
  Remove unused return value from signal_irq callback
  ...

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (37 commits)
  [S390] Avoid excessive inlining.
  [S390] Mark kernel text section read-only.
  [S390] Convert memory detection into C code.
  [S390] Calibrate delay and bogomips.
  [S390] Hypervisor filesystem (s390_hypfs) for z/VM
  [S390] Add crypto support for 3592 tape devices
  [S390] boot from NSS support
  [S390] Support for s390 Pseudo Random Number Generator
  [S390] ETR support.
  [S390] noexec protection
  [S390] move crypto options and some cleanup.
  [S390] cio: Don't spam debug feature.
  [S390] Cleanup of CHSC event handling.
  [S390] cio: declare hardware structures packed.
  [S390] Add set_fs(USER_DS) to start_thread().
  [S390] cio: Catch operand exceptions on stsch.
  [S390] Fix register usage description.
  [S390] kretprobe_trampoline_holder() in wrong section.
  [S390] Fix kprobes breakpoint handling.
  [S390] Update maintainers file.
  ...

Fix the key serial number collision avoidance code in key_alloc_serial().

This didn't use to be so much of a problem as the key serial numbers were
allocated from a simple incremental counter, and it would have to go through
two billion keys before it could possibly encounter a collision.  However, now
that random numbers are used instead, collisions are much more likely.

This is fixed by finding a hole in the rbtree where the next unused serial
number ought to be and using that by going almost back to the top of the
insertion routine and redoing the insertion with the new serial number rather
than trying to be clever and attempting to work out the insertion point
pointer directly.

This fixes kernel BZ #7727.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Minor cleanup
  [CIFS] Missing free in error path
  [CIFS] Reduce cifs stack space usage
  [CIFS] lseek polling returned stale EOF

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (40 commits)
  [MIPS] Yosemite: Fix missing parens in SERIAL_READ_1 macro
  [MIPS] Fix warnings in run_uncached on 32bit kernel
  [MIPS] Comment fix
  [MIPS] MT: Nuke duplicate mips_mt_regdump() prototype.
  [MIPS] Alchemy:  Fix PCI-memory access
  [MIPS] Move .set reorder out of conditional code
  [MIPS] Check FCSR for pending interrupts before restoring from a context.
  [MIPS] Jaguar ATX: Fix large number of warnings.
  [MIPS] Jaguar: Fix MAC address detection after platform_device conversion.
  [MIPS] SMTC: Make a bunch of functions and variables static.
  [MIPS] Use compat_sys_pselect6
  [MIPS] SMTC: Cleanup idle hook invocation.
  [MIPS] SELinux: Add security hooks to mips-mt {get,set}affinity
  [MIPS] IRIX: Linux coding style cleanups.
  [MIPS] PB1100: Fix pile of warnings
  [MIPS] Alchemy: Fix bunch of warnings
  [MIPS] Whitespace cleanups.
  [MIPS] Alchemy: Fix bunch more warnings.
  [MIPS] Use ARRAY_SIZE macro when appropriate
  [MIPS] Fix some whitespace damage
  ...

 Tildes as in path as in filenames are handled correctly now:
 only files, containing tilde '~', are backups, thus are not valid.

 [KJ]:
 Definition of `space' was removed, scripts/Kbuild.include has one.
 That definition was taken right from the GNU make manual, while Kbuild's
 version is original.

Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Bastian Blank <bastian@waldi.eu.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

 GNU binutils, root users, tmpfiles, external modules ro builds must
 be fixed to do the right thing now.

Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Horst Schirmeier <horst@schirmeier.com>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: Daniel Drake <dsd@gentoo.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

  Replacing overhead of using some (external) programs
  instead of good old `sh'.

Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: William Stearns <wstearns@pobox.com>
Cc: Martin Schlemmer <azarah@nosferatu.za.org>
Signed-off-by: Oleg Verych <olecom@flower.upol.cz>
Acked-by: Mark Lord <lkml@rtr.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Missing tab.  Missing entry in changelog
Signed-off-by: Steve French <sfrench@us.ibm.com>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/lib/uncached.c: In function 'run_uncached':
arch/mips/lib/uncached.c:47: warning: comparison is always true due to limited range of data type
arch/mips/lib/uncached.c:48: warning: comparison is always false due to limited range of data type
arch/mips/lib/uncached.c:57: warning: comparison is always true due to limited range of data type
arch/mips/lib/uncached.c:58: warning: comparison is always false due to limited range of data type
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>