- 18 Nov, 2017 6 commits
-
-
Takashi Iwai authored
commit fc27fe7e upstream. ALSA sequencer core has a mechanism to load the enumerated devices automatically, and it's performed in an off-load work. This seems causing some race when a sequencer is removed while the pending autoload work is running. As syzkaller spotted, it may lead to some use-after-free: BUG: KASAN: use-after-free in snd_rawmidi_dev_seq_free+0x69/0x70 sound/core/rawmidi.c:1617 Write of size 8 at addr ffff88006c611d90 by task kworker/2:1/567 CPU: 2 PID: 567 Comm: kworker/2:1 Not tainted 4.13.0+ #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: events autoload_drivers Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x192/0x22c lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x230/0x340 mm/kasan/report.c:409 __asan_report_store8_noabort+0x1c/0x20 mm/kasan/report.c:435 snd_rawmidi_dev_seq_free+0x69/0x70 sound/core/rawmidi.c:1617 snd_seq_dev_release+0x4f/0x70 sound/core/seq_device.c:192 device_release+0x13f/0x210 drivers/base/core.c:814 kobject_cleanup lib/kobject.c:648 [inline] kobject_release lib/kobject.c:677 [inline] kref_put include/linux/kref.h:70 [inline] kobject_put+0x145/0x240 lib/kobject.c:694 put_device+0x25/0x30 drivers/base/core.c:1799 klist_devices_put+0x36/0x40 drivers/base/bus.c:827 klist_next+0x264/0x4a0 lib/klist.c:403 next_device drivers/base/bus.c:270 [inline] bus_for_each_dev+0x17e/0x210 drivers/base/bus.c:312 autoload_drivers+0x3b/0x50 sound/core/seq_device.c:117 process_one_work+0x9fb/0x1570 kernel/workqueue.c:2097 worker_thread+0x1e4/0x1350 kernel/workqueue.c:2231 kthread+0x324/0x3f0 kernel/kthread.c:231 ret_from_fork+0x25/0x30 arch/x86/entry/entry_64.S:425 The fix is simply to assure canceling the autoload work at removing the device. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Takashi Iwai <tiwai@suse.de> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Torokhov authored
commit ea04efee upstream. Before trying to use CDC union descriptor, try to validate whether that it is sane by checking that intf->altsetting->extra is big enough and that descriptor bLength is not too big and not too small. Reported-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Alan Stern authored
commit 7c80f9e4 upstream. If the usbtest driver encounters a device with an IN bulk endpoint but no OUT bulk endpoint, it will try to dereference a NULL pointer (out->desc.bEndpointAddress). The problem can be solved by adding a missing test. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Johannes Berg authored
commit cfbb0d90 upstream. For the reinstall prevention, the code I had added compares the whole key. It turns out though that iwlwifi firmware doesn't provide the TKIP TX MIC key as it's not needed in client mode, and thus the comparison will always return false. For client mode, thus always zero out the TX MIC key part before doing the comparison in order to avoid accepting the reinstall of the key with identical encryption and RX MIC key, but not the same TX MIC key (since the supplicant provides the real one.) Fixes: fdf7cb41 ("mac80211: accept key reinstall without changing anything") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Jason A. Donenfeld authored
commit 2bdd713b upstream. Otherwise we risk leaking information via timing side channel. Fixes: fdf7cb41 ("mac80211: accept key reinstall without changing anything") Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Johannes Berg authored
commit fdf7cb41 upstream. When a key is reinstalled we can reset the replay counters etc. which can lead to nonce reuse and/or replay detection being impossible, breaking security properties, as described in the "KRACK attacks". In particular, CVE-2017-13080 applies to GTK rekeying that happened in firmware while the host is in D3, with the second part of the attack being done after the host wakes up. In this case, the wpa_supplicant mitigation isn't sufficient since wpa_supplicant doesn't know the GTK material. In case this happens, simply silently accept the new key coming from userspace but don't take any action on it since it's the same key; this keeps the PN replay counters intact. Signed-off-by:
-
- 15 Nov, 2017 34 commits
-
-
Greg Kroah-Hartman authored
-
Colin Ian King authored
commit 06aae592 upstream. The boolean want is not initialized and hence garbage. The default should be false (later it is only set to true on tne sinfo->authattrs check). Found with static analysis using CoverityScan Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David Howells <dhowells@redhat.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Borislav Petkov authored
commit a743bbee upstream. The warning below says it all: BUG: using __this_cpu_read() in preemptible [00000000] code: swapper/0/1 caller is __this_cpu_preempt_check CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc8 #4 Call Trace: dump_stack check_preemption_disabled ? do_early_param __this_cpu_preempt_check arch_perfmon_init op_nmi_init ? alloc_pci_root_info oprofile_arch_init oprofile_init do_one_initcall ... These accessors should not have been used in the first place: it is PPro so no mixed silicon revisions and thus it can simply use boot_cpu_data. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Tested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Robert Richter <rric@kernel.org> Cc: x86@kernel.org Signed-off-by:
-
Richard Schütz authored
commit fb5f0b3e upstream. The D_CAN controller doesn't provide a triple sampling mode, so don't set the CAN_CTRLMODE_3_SAMPLES flag in ctrlmode_supported. Currently enabling triple sampling is a no-op. Signed-off-by:
Richard Schütz <rschuetz@uni-koblenz.de> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Gerhard Bertelsmann authored
commit 4dcf924c upstream. SUN4Is CAN IP has a 64 byte deep FIFO buffer. If the buffer is not drained fast enough (overrun) it's getting mangled. Already received frames are dropped - the data can't be restored. Signed-off-by:
Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Signed-off-by:
-
Ilya Dryomov authored
commit 1e37f2f8 upstream. rbd_img_obj_exists_submit() and rbd_img_obj_parent_read_full() are on the writeback path for cloned images -- we attempt a stat on the parent object to see if it exists and potentially read it in to call copyup. GFP_NOIO should be used instead of GFP_KERNEL here. Link: http://tracker.ceph.com/issues/22014Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
David Disseldorp <ddiss@suse.de> [idryomov@gmail.com: backport to < 4.9: context] Signed-off-by:
-
Sinclair Yeh authored
commit cef75036 upstream. This is an extension of Commit 7c20d213 ("drm/vmwgfx: Work around mode set failure in 2D VMs") With Wayland desktop and atomic mode set, during the mode setting process there is a moment when two framebuffer sized surfaces are being pinned. This was not an issue with Xorg. Since this only happens during a mode change, there should be no performance impact by increasing allowable mem_size. Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Kai-Heng Feng authored
commit cdea6a30 upstream. ELAN060C touchpad uses elan_i2c as its driver. It can be found on Lenovo ideapad 320-14AST. BugLink: https://bugs.launchpad.net/bugs/1727544Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Oswald Buddenhagen authored
commit b084116f upstream. Without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is never copied, resulting in a dead port. Fixes: 154615d5 ("MIPS: AR7: Use correct UART port type") Signed-off-by:
Oswald Buddenhagen <oswald.buddenhagen@gmx.de> [jonas.gorski: add Fixes tag] Signed-off-by:
Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Cc: Nicolas Schichan <nschichan@freebox.fr> Cc: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17543/Signed-off-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
-
Jonas Gorski authored
commit e6b03ab6 upstream. When called from prom init code, ar7_gpio_init() will fail as it will call gpiochip_add() which relies on a working kmalloc() to alloc the gpio_desc array and kmalloc is not useable yet at prom init time. Move ar7_gpio_init() to ar7_register_devices() (a device_initcall) where kmalloc works. Fixes: 14e85c0e ("gpio: remove gpio_descs global array") Signed-off-by:
-
Luis R. Rodriguez authored
commit afb999cd upstream. Some distributions (Debian, OpenSUSE) have a udev rule in place to cancel all fallback mechanism uevents immediately. This would obviously make it hard to test against the fallback mechanism test interface, so we need to check for this. Signed-off-by:
Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Luis R. Rodriguez authored
commit 880444e2 upstream. Error that we expect should not be spilled to stdout. Without this we get: ./fw_filesystem.sh: line 58: printf: write error: Invalid argument ./fw_filesystem.sh: line 63: printf: write error: No such device ./fw_filesystem.sh: line 69: echo: write error: No such file or directory ./fw_filesystem.sh: filesystem loading works ./fw_filesystem.sh: async filesystem loading works With it: ./fw_filesystem.sh: filesystem loading works ./fw_filesystem.sh: async filesystem loading works Signed-off-by:
-
Brian Norris authored
commit 1b1fe542 upstream. Now that we've added a 'trigger_async_request' knob to test the request_firmware_nowait() API, let's use it. Also add tests for the empty ("") string, since there have been a couple errors in that handling already. Since we now have real ways that the sysfs write might fail, let's add the appropriate check on the 'echo' lines too. Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> [AmitP: Dropped the async trigger testing parts from original commit] Signed-off-by:
-
Brian Norris authored
commit 47e0bbb7 upstream. request_firmware() failures currently won't get reported at all (the error code is discarded). What's more, we get confusing messages, like: # echo -n notafile > /sys/devices/virtual/misc/test_firmware/trigger_request [ 8280.311856] test_firmware: loading 'notafile' [ 8280.317042] test_firmware: load of 'notafile' failed: -2 [ 8280.322445] test_firmware: loaded: 0 # echo $? 0 Report the failures via write() errors, and don't say we "loaded" anything. Signed-off-by:
-
Matt Redfearn authored
commit 9e8c399a upstream. Commit 6f542ebe ("MIPS: Fix race on setting and getting cpu_online_mask") effectively reverted commit 8f46cca1 ("MIPS: SMP: Fix possibility of deadlock when bringing CPUs online") and thus has reinstated the possibility of deadlock. The commit was based on testing of kernel v4.4, where the CPU hotplug core code issued a BUG() if the starting CPU is not marked online when the boot CPU returns from __cpu_up. The commit fixes this race (in v4.4), but re-introduces the deadlock situation. As noted in the commit message, upstream differs in this area. Commit 8df3e07e ("cpu/hotplug: Let upcoming cpu bring itself fully up") adds a completion event in the CPU hotplug core code, making this race impossible. However, people were unhappy with relying on the core code to do the right thing. To address the issues both commits were trying to fix, add a second completion event in the MIPS smp hotplug path. It removes the possibility of a race, since the MIPS smp hotplug code now synchronises both the boot and secondary CPUs before they return to the hotplug core code. It also addresses the deadlock by ensuring that the secondary CPU is not marked online before it's counters are synchronised. This fix should also be backported to fix the race condition introduced by the backport of commit 8f46cca1 ("MIPS: SMP: Fix possibility of deadlock when bringing CPUs online"), through really that race only existed before commit 8df3e07e ("cpu/hotplug: Let upcoming cpu bring itself fully up"). Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Fixes: 6f542ebe ("MIPS: Fix race on setting and getting cpu_online_mask") CC: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com> Patchwork: https://patchwork.linux-mips.org/patch/17376/Signed-off-by:
-
Matija Glavinic Pecotic authored
commit 6f542ebe upstream. While testing cpu hoptlug (cpu down and up in loops) on kernel 4.4, it was observed that occasionally check for cpu online will fail in kernel/cpu.c, _cpu_up: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/kernel/cpu.c?h=v4.4.79#n485 518 /* Arch-specific enabling code. */ 519 ret = __cpu_up(cpu, idle); 520 521 if (ret != 0) 522 goto out_notify; 523 BUG_ON(!cpu_online(cpu)); Reason is race between start_secondary and _cpu_up. cpu_callin_map is set before cpu_online_mask. In __cpu_up, cpu_callin_map is waited for, but cpu online mask is not, resulting in race in which secondary processor started and set cpu_callin_map, but not yet set the online mask,resulting in above BUG being hit. Upstream differs in the area. cpu_online check is in bringup_wait_for_ap, which is after cpu reached AP_ONLINE_IDLE,where secondary passed its start function. Nonetheless, fix makes start_secondary safe and not depending on other locks throughout the code. It protects as well against cpu_online checks put in between sometimes in the future. Fix this by moving completion after all flags are set. Signed-off-by:
Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com> Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16925/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Matt Redfearn authored
commit a00eeede upstream. If a secondary CPU failed to start, for any reason, the CPU requesting the secondary to start would get stuck in the loop waiting for the secondary to be present in the cpu_callin_map. Rather than that, use a completion event to signal that the secondary CPU has started and is waiting to synchronise counters. Since the CPU presence will no longer be marked in cpu_callin_map, remove the redundant test from arch_cpu_idle_dead(). Signed-off-by:
-
Paul Burton authored
commit 6a6cba1d upstream. The default CM target field in the GCR_BASE register is encoded with 0 meaning memory & 1 being reserved. However the definitions we use for those bits effectively get these two values backwards - likely because they were copied from the definitions for the CM regions where the target is encoded differently. This results in use setting up GCR_BASE with the reserved target value by default, rather than targeting memory as intended. Although we currently seem to get away with this it's not a great idea to rely upon. Fix this by changing our macros to match the documentated target values. The incorrect encoding became used as of commit 9f98f3dd ("MIPS: Add generic CM probe & access code") in the Linux v3.15 cycle, and was likely carried forwards from older but unused code introduced by commit 39b8d525 ("[MIPS] Add support for MIPS CMP platform.") in the v2.6.26 cycle. Fixes: 9f98f3dd ("MIPS: Add generic CM probe & access code") Signed-off-by:
Paul Burton <paul.burton@mips.com> Reported-by:
Matt Redfearn <matt.redfearn@mips.com> Reviewed-by:
-
Gustavo A. R. Silva authored
commit 77238e76 upstream. It seems that this is a typo error and the proper bit masking is "RT | RS" instead of "RS | RS". This issue was detected with the help of Coccinelle. Fixes: d6b3314b ("MIPS: uasm: Add lh uam instruction") Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by:
-
Takashi Iwai authored
commit 3510c7aa upstream. The recent fix for adding rwsem nesting annotation was using the given "hop" argument as the lock subclass key. Although the idea itself works, it may trigger a kernel warning like: BUG: looking up invalid subclass: 8 .... since the lockdep has a smaller number of subclasses (8) than we currently allow for the hops there (10). The current definition is merely a sanity check for avoiding the too deep delivery paths, and the 8 hops are already enough. So, as a quick fix, just follow the max hops as same as the max lockdep subclasses. Fixes: 1f20f9ff ("ALSA: seq: Fix nested rwsem annotation for lockdep splat") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Takashi Iwai authored
commit 132d358b upstream. The SYSEX event delivery in OSS sequencer emulation assumed that the event is encoded in the variable-length data with the straight buffering. This was the normal behavior in the past, but during the development, the chained buffers were introduced for carrying more data, while the OSS code was left intact. As a result, when a SYSEX event with the chained buffer data is passed to OSS sequencer port, it may end up with the wrong memory access, as if it were having a too large buffer. This patch addresses the bug, by applying the buffer data expansion by the generic snd_seq_dump_var_event() helper function. Reported-by:
Mark Salyzyn <salyzyn@android.com> Signed-off-by:
-
Mark Rutland authored
commit b9dd05c7 upstream. When CONFIG_DEBUG_USER is enabled, it's possible for a user to deliberately trigger dump_instr() with a chosen kernel address. Let's avoid problems resulting from this by using get_user() rather than __get_user(), ensuring that we don't erroneously access kernel memory. So that we can use the same code to dump user instructions and kernel instructions, the common dumping code is factored out to __dump_instr(), with the fs manipulated appropriately in dump_instr() around calls to this. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Eric Biggers authored
commit 624f5ab8 upstream. syzkaller reported a NULL pointer dereference in asn1_ber_decoder(). It can be reproduced by the following command, assuming CONFIG_PKCS7_TEST_KEY=y: keyctl add pkcs7_test desc '' @s The bug is that if the data buffer is empty, an integer underflow occurs in the following check: if (unlikely(dp >= datalen - 1)) goto data_overrun_error; This results in the NULL data pointer being dereferenced. Fix it by checking for 'datalen - dp < 2' instead. Also fix the similar check for 'dp >= datalen - n' later in the same function. That one possibly could result in a buffer overread. The NULL pointer dereference was reproducible using the "pkcs7_test" key type but not the "asymmetric" key type because the "asymmetric" key type checks for a 0-length payload before calling into the ASN.1 decoder but the "pkcs7_test" key type does not. The bug report was: BUG: unable to handle kernel NULL pointer dereference at (null) IP: asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233 PGD 7b708067 P4D 7b708067 PUD 7b6ee067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 522 Comm: syz-executor1 Not tainted 4.14.0-rc8 #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.3-20171021_125229-anatol 04/01/2014 task: ffff9b6b3798c040 task.stack: ffff9b6b37970000 RIP: 0010:asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233 RSP: 0018:ffff9b6b37973c78 EFLAGS: 00010216 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000021c RDX: ffffffff814a04ed RSI: ffffb1524066e000 RDI: ffffffff910759e0 RBP: ffff9b6b37973d60 R08: 0000000000000001 R09: ffff9b6b3caa4180 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f10ed1f2700(0000) GS:ffff9b6b3ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000007b6f3000 CR4: 00000000000006f0 Call Trace: pkcs7_parse_message+0xee/0x240 crypto/asymmetric_keys/pkcs7_parser.c:139 verify_pkcs7_signature+0x33/0x180 certs/system_keyring.c:216 pkcs7_preparse+0x41/0x70 crypto/asymmetric_keys/pkcs7_key_type.c:63 key_create_or_update+0x180/0x530 security/keys/key.c:855 SYSC_add_key security/keys/keyctl.c:122 [inline] SyS_add_key+0xbf/0x250 security/keys/keyctl.c:62 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4585c9 RSP: 002b:00007f10ed1f1bd8 EFLAGS: 00000216 ORIG_RAX: 00000000000000f8 RAX: ffffffffffffffda RBX: 00007f10ed1f2700 RCX: 00000000004585c9 RDX: 0000000020000000 RSI: 0000000020008ffb RDI: 0000000020008000 RBP: 0000000000000000 R08: ffffffffffffffff R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00007fff1b2260ae R13: 00007fff1b2260af R14: 00007f10ed1f2700 R15: 0000000000000000 Code: dd ca ff 48 8b 45 88 48 83 e8 01 4c 39 f0 0f 86 a8 07 00 00 e8 53 dd ca ff 49 8d 46 01 48 89 85 58 ff ff ff 48 8b 85 60 ff ff ff <42> 0f b6 0c 30 89 c8 88 8d 75 ff ff ff 83 e0 1f 89 8d 28 ff ff RIP: asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233 RSP: ffff9b6b37973c78 CR2: 0000000000000000 Fixes: 42d5ec27 ("X.509: Add an ASN.1 decoder") Reported-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Andrey Ryabinin authored
commit d041b557 upstream. struct sha1_ctx_mgr allocated in sha1_mb_mod_init() via kzalloc() and later passed in sha1_mb_flusher_mgr_flush_avx2() function where instructions vmovdqa used to access the struct. vmovdqa requires 16-bytes aligned argument, but nothing guarantees that struct sha1_ctx_mgr will have that alignment. Unaligned vmovdqa will generate GP fault. Fix this by replacing vmovdqa with vmovdqu which doesn't have alignment requirements. Fixes: 2249cbb5 ("crypto: sha-mb - SHA1 multibuffer submit and flush routines for AVX2") Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Li Bin authored
commit cef572ad upstream. When queue_work() is used in irq (not in task context), there is a potential case that trigger NULL pointer dereference. ---------------------------------------------------------------- worker_thread() |-spin_lock_irq() |-process_one_work() |-worker->current_pwq = pwq |-spin_unlock_irq() |-worker->current_func(work) |-spin_lock_irq() |-worker->current_pwq = NULL |-spin_unlock_irq() //interrupt here |-irq_handler |-__queue_work() //assuming that the wq is draining |-is_chained_work(wq) |-current_wq_worker() //Here, 'current' is the interrupted worker! |-current->current_pwq is NULL here! |-schedule() ---------------------------------------------------------------- Avoid it by checking for task context in current_wq_worker(), and if not in task context, we shouldn't use the 'current' to check the condition. Reported-by:
Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by:
Li Bin <huawei.libin@huawei.com> Reviewed-by:
Lai Jiangshan <jiangshanlai@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Fixes: 8d03ecfe ("workqueue: reimplement is_chained_work() using current_wq_worker()") Signed-off-by:
-
Peter Zijlstra authored
commit 7c478895 upstream. I recently encountered wreckage because access_ok() was used where it should not be, add an explicit WARN when access_ok() is used wrongly. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Ingo Molnar <mingo@kernel.org> [add include/preempt.h to fix build error - gregkh] Signed-off-by:
-
Carlo Caione authored
commit d3138769 upstream. All the helper functions (i.e. hp_wmi_dock_state, hp_wmi_tablet_state, ...) using hp_wmi_perform_query to perform an HP WMI query shadow the returned value in case of error. We return -EINVAL only when the HP WMI query returns a positive value (the specific error code) to not mix this up with the actual value returned by the helper function. Suggested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Carlo Caione <carlo@endlessm.com> Signed-off-by:
Darren Hart (VMware) <dvhart@infradead.org> Cc: Philip Müller <philm@manjaro.org> Signed-off-by:
-
Carlo Caione authored
commit c7dfc2fa upstream. hp_wmi_tablet_state() fails to return the correct error code when hp_wmi_perform_query() returns the HP WMI query specific error code that is a positive value. Signed-off-by:
-
Eric Biggers authored
commit a3c812f7 upstream. When calling keyctl_read() on a key of type "trusted", if the user-supplied buffer was too small, the kernel ignored the buffer length and just wrote past the end of the buffer, potentially corrupting userspace memory. Fix it by instead returning the size required, as per the documentation for keyctl_read(). We also don't even fill the buffer at all in this case, as this is slightly easier to implement than doing a short read, and either behavior appears to be permitted. It also makes it match the behavior of the "encrypted" key type. Fixes: d00a1c72 ("keys: add new trusted key-type") Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Reviewed-by:
-
Eric Biggers authored
commit ee618b46 upstream. As the previous patch did for encrypted-keys, zero sensitive any potentially sensitive data related to the "trusted" key type before it is freed. Notably, we were not zeroing the tpm_buf structures in which the actual key is stored for TPM seal and unseal, nor were we zeroing the trusted_key_payload in certain error paths. Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: David Safford <safford@us.ibm.com> Signed-off-by:
-
Enrico Mioso authored
commit 2b02c20c upstream. Some firmwares in Huawei E3372H devices have been observed to switch back to NTB 32-bit format after altsetting switch. This patch implements a driver flag to check for the device settings and set NTB format to 16-bit again if needed. The flag has been activated for devices controlled by the huawei_cdc_ncm.c driver. V1->V2: - fixed broken error checks - some corrections to the commit message V2->V3: - variable name changes, to clarify what's happening - check (and possibly set) the NTB format later in the common bind code path Signed-off-by:
Enrico Mioso <mrkiko.rs@gmail.com> Reported-and-tested-by:
Christian Panton <christian@panton.org> Reviewed-by:
Bjørn Mork <bjorn@mork.no> CC: Bjørn Mork <bjorn@mork.no> CC: Christian Panton <christian@panton.org> CC: linux-usb@vger.kernel.org CC: netdev@vger.kernel.org CC: Oliver Neukum <oliver@neukum.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Porto Rio <porto.rio@gmx.net> Signed-off-by:
-
Carlo Caione authored
commit 298747b7 upstream. The current driver code is not checking for the error values returned by 'hp_wmi_dock_state()' and 'hp_wmi_tablet_state()' before passing the returned values down to 'input_report_switch()'. This error code is being translated to '1' in the input subsystem, reporting the wrong status. The biggest problem caused by this issue is that several laptops are wrongly reported by the driver as docked, preventing them to be put to sleep using the LID (and in most cases they are not even dockable). With this patch we create the report switches only if we are able to read the dock and tablet mode status correctly from ACPI. Signed-off-by:
-
Vivien Didelot authored
[ Upstream commit 3a89eaa6 ] The support for DSA Ethernet switch chips depends on TCP/IP networking, thus explicit that HAVE_NET_DSA depends on INET. DSA uses SWITCHDEV, thus select it instead of depending on it. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Julian Wiedmann authored
[ Upstream commit 10340510 ] STARTLAN needs to be the first IPA command after MPC initialization completes. So move the qeth_send_startlan() call from the layer disciplines into the core path, right after the MPC handshake. While at it, replace the magic LAN OFFLINE return code with the existing enum. Signed-off-by:
Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by:
-
