- 03 Jan, 2005 40 commits
-
-
Andi Kleen authored
Add x86_64 support for Jack Steiner's SLIT sysfs patch Make Jack's code compile on x86-64 and add x86-64 low level support to save the SLIT pointer and a node_distance() implementation. Requires the previous SRAT patch. Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Andi Kleen authored
Add SLIT (inter node distance) information to sysfs. [This is Jack's patch that he submitted on l-k. I'm submitting it for him because I need it for my x86-64 followon SLIT patch. Hope I don't stomp onto his toes with that one. If you already merged it please ignore] From: Jack Steiner Here is an update patch to externalize the SLIT information. I think I have encorporated all the comments that were posted previously) For example: # cd /sys/devices/system # find . ./node ./node/node5 ./node/node5/distance ./node/node5/numastat ./node/node5/meminfo ./node/node5/cpumap # cat ./node/node0/distance 10 20 64 42 42 22 # cat node/*/distance 10 20 64 42 42 22 20 10 42 22 64 84 64 42 10 20 22 42 42 22 20 10 42 62 42 64 22 42 10 20 22 84 42 62 20 10 Signed-off-by:Jack Steiner <steiner@sgi.com> Signed-off-by:
-
Andi Kleen authored
Remove unneeded ifdef in hardirq.h I can't see any reason for the #ifdef CONFIG_X86 introduced to the x86_64 hardirq.h as part of the generic irq subsystem changes. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Andi Kleen authored
Fix EM64T config description From: Xose Vazquez Perez <xose@wanadoo.es> Signed-off-by:
-
Andi Kleen authored
Fix some outdated assumptions that CPU numbers are equal numbers. Depends on the unlimited cpus patch. Signed-off-by:
-
Andi Kleen authored
Fix a warning in the CMP support code for !CONFIG_NUMA Signed-off-by:
-
Andi Kleen authored
Allow to configure more CPUs and nodes. With clustered mode and AMD's big flat APIC mode there is no reason anymore to limit the max number of CPUs to 8. Increase the limit to 256 for now, which is the current APIC limit. Untested for now. Also increase the max number of nodes to 64. Remove the MAXNODE define and replace it with MAX_NUMNODES everywhere or the constant if the hardware limits the number of nodes. Also remove some obsolete comments. Signed-off-by:
-
Andi Kleen authored
Export phys_proc_id This is useful for the powernow-k8 driver which needs to know that two CPUs share a die. It cannot use cpu_sibling_map anymore, so this is an alternative. Signed-off-by:
-
Andi Kleen authored
Always print segfaults for init. This gives better debugging output when something is really wrong with the kernel. Signed-off-by:
-
Andi Kleen authored
Add a missing newline in /proc/cpuinfo Signed-off-by:
-
Andi Kleen authored
Add a missing __iomem pointed out by Linus. Signed-off-by:
-
Andi Kleen authored
Scheduler support for AMD CMP AMD dual core looks like HT but isn't really. Hide it from the scheduler. This works around problems with the domain scheduler. Also probably gives slightly better scheduling and disables SMT nice which is harmful on dual core. We still display it like HT in /proc/cpuinfo. This is to make it appear the same to license managers so that they count dual cores only as a single physical CPU. Signed-off-by:
-
Andi Kleen authored
Rename HTVALID to CMP_LEGACY AMD renamed the HTVALID CPUID flag to CMP_LEGACY and reverted its meaning. Follow this for /proc/cpuinfo Needed for the followon CMP patches. Signed-off-by:
-
Andi Kleen authored
Remove debug information for vsyscalls This helps gdb apparently because it doesn't like code with debugging information before other code (?) Via the kgdb folks. Signed-off-by:
-
Andi Kleen authored
Allow a kernel debugger to hide single steps in more cases. Apparently helps the kgdb people. Signed-off-by:
-
Andi Kleen authored
Update uptime after suspend Derived from i386 Adjust jiffies after suspend to keep uptime. Signed-off-by:
-
Andi Kleen authored
Add SRAT NUMA discovery to x86-64. Previously the NUMA nodes on Opteron systems were directly read from the hardware registers of the northbridge. This version also supports reading it from the more generic ACPI SRAT table. This allows to support NUMA on all kinds of systems and in general gives more flexibility, but needs a bit of BIOS support. This implementation was not done before because the SRAT specification had a bad license from Microsoft that didn't allow to implement it on other OS. Now that ACPI 3.0 is released and SRAT is part of it that isn't a concern anymore. One side effect of this is that holes not described in SRAT (e.g. usually the 640K DOS and 4GB PCI memory holes) will not included in the nodes and won't get mem_map entries allocated. This may have side effects for some drivers. Some support for handling dual core AMD CPUs is included. SLIT parsing is done in a later patch. Depends on earlier patches to split up the ACPI boot parsing and to add better CMP support on x86-64. Can be disabled with numa=noacpi Signed-off-by:
-
Andi Kleen authored
Split ACPI boot table parsing Split ACPI boot table parsing into two parts. First a acpi_boot_table_init() call that initializes the basic ACPI table parsing machinery and discovers the RSDP, and then another call to actually parse the various boot tables. This is needed for a followon patch that implements SRAT support, because nodes need to be set up before the other ACPI tables can be parsed. On x86-64 I moved the early initialization very early because that is needed for the SRAT parser. On i386 it should be a nop. Signed-off-by:
-
Andi Kleen authored
Handle NX correctly in pageattr Second attempt to try to fix an long standing NX bug in change_page_attr. Hopefully this version will be better. The kernel text mapping aliases part of the physical memory and needs its caching attributes changed too. But when doing this one has to be very careful to handle the NX bit correctly. A previous slightly different version of this broke the X server on some RH systems. I hope this version will be better, but if you have X server problems please revert this one. Signed-off-by:
-
Andi Kleen authored
Collected ioremap fixes - Call change_page_attr correctly - Fix a race during iounmap - Handle mmio holes without mem_map correctly (needed for SRAT patch) - Some cleanups Signed-off-by:
-
Andi Kleen authored
Add reboot=force reboot=force doesn't wait for any other CPUs on reboot. This is useful when you really need a system to reboot on its own. Signed-off-by:
-
Andi Kleen authored
Remove BIOS reboot code Remove the never quite working BIOS reboot code. This gets rid of a lot of code. Signed-off-by:
-
Andi Kleen authored
Remove duplicated FAKE_STACK_FRAME macro. FAKE_STACK_FRAME macro is defined twice. The one that gets used is in arch/x86_64/kernel/entry.S, and is slightly different codewise, although should have the same end result (uses pushq rather than addq %rsp + movq and has the extra dwarf annotations). Signed-off-by:
Chris Wright <chrisw@osdl.org> Signed-off-by:
-
Andi Kleen authored
Reenable MGA DRI on x86-64 Has been reported as working. Signed-off-by:
-
Badari Pulavarty authored
Problem is with "c - cpu_data" arthimetic. "c" could be "boot_cpu_data" or "cpu_data". Signed-off-by:
-
Andi Kleen authored
Fix bugs in the AMD K8 CMP support code. Check the correct cpuid level and move numa_add_cpu to the correct place. Signed-off-by:
-
Andi Kleen authored
Add a real pfn_valid This adds a real pfn_valid. Needed together with the SRAT patch which can generated memmap less holes for mmio. In general it will help to handle memory holes better. Signed-off-by:
-
Prasanna S. Panchamukhi authored
This patch adds the return value check for the exception notifiers at do_general_protection as pointed out by Chuck Ebbert. Signed-off-by:
Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by:
-
Zwane Mwaikambo authored
Patch adds support for notification of overheating conditions on intel x86_64 processors. Tested on EM64T, test booted on AMD64. Hardware courtesy of Intel Corporation Signed-off-by:
Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by:
-
H. Peter Anvin authored
This patch exports to userspace the boot loader ID which has been exported by (b)zImage boot loaders since boot protocol version 2. It is needed so that update tools that update kernels from vendors know which bootloader file they need to update; eg right now those tools do all kinds of hairy heuristics to find out if it's grub or lilo or .. that installed the kernel. Those heuristics are fragile in the presence of more than one bootloader (which isn't that uncommon in OS upgrade situations). Tested on i386 and x86-64; as far as I know those are the only architectures which use zImage/bzImage format. Signed-Off-By:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
H. Peter Anvin authored
This patch adds some i386 boot loader IDs that were used but never officially recorded as assigned. This makes them nice and official. Signed-Off-By:
-
Vivek Goyal authored
This patch fixes the problem of secondary cpus not coming up over a reboot. This problem was seen when a kernel compiled for non default (16MB) location is booted. Signed-off-by:
Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by:
-
Dave Hansen authored
This function is unused on i386. Signed-off-by:
Dave Hansen <haveblue@us.ibm.com> Signed-off-by:
-
H. Peter Anvin authored
Signed-off-by:
-
Zwane Mwaikambo authored
Booting with NX, CONFIG_X86_PAE and CONFIG_DEBUG_PAGEALLOC or mem=nopentium triple faults really early during boot as it appears to be tripping over pages from PAGE_OFFSET -> PAGE_OFFSET + 0x100000 not being marked as executable. Signed-off-by:
Zwane Mwaikambo <zwane@arm.linux.org.uk> Signed-off-by:
-
Zwane Mwaikambo authored
This patch is for the following bug, thanks to Ondrej Zary for reporting, testing and submitting a patch. http://bugzilla.kernel.org/show_bug.cgi?id=3767 It appears that the Cyrix MII won't touch %ecx at all resulting in stale data being returned as extended attributes, so clear ecx before issuing the cpuid. I have also made the capability print code display all the capability words for easier debugging in future. Signed-off-by:
-
Venkatesh Pallipadi authored
The setup.S data and code is not cleanly separated. The current space reserved for setup header is not enough to fit the complete header. As a result, part of the header (EDDBUF) will overwrite the initial code. I haven't seen any negative impact of this bug. As, by the time the setup code is overwritten, we would have finished executing it anyway. But, I think it is better to separate the header and code and prevent this data_overwriting_the_code condition. The atatched patch adds some space in the header to fit all the data listed in Documentation/i386/zero-page.txt for both i386 and x86_64 (and updates zero-page.txt). Signed-off-by:
: "Venkatesh Pallipadi" <venkatesh.pallipadi@intel.com> Signed-off-by:
-
Martin J. Bligh authored
Badari hit a problem when configuring PAE off (ie CONFIG_4G) where the pkmap area could end up overlapping the fixmap area. For some reason, PKMAP_BASE was defined statically, which seems rather pointless, and asking for trouble. Patch below definines it dynamically, under the fixmap area. The ordering of the VMALLOC_RESERVE space is: FIXADDR_TOP fixed_addresses FIXADDR_START temp fixed addresses FIXADDR_BOOT_START Persistent kmap area PKMAP_BASE VMALLOC_END Vmalloc area VMALLOC_START high_memory Signed-off-by:
-
David Howells authored
The attached patch fixes the IDE driver to initialise correctly in the case that IDE_ARCH_OBSOLETE_INIT is not defined. Not defining this macro would seem to be the correct thing to do since it includes the word "obsolete" in its name. Signed-Off-By:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
The attached patch creates a generic set of termio userspace access functions with proper error handling. None of the current archs check for errors in this case. Signed-Off-By:
-
