- 18 Sep, 2020 7 commits
-
-
Michael Ellerman authored
arch_cpu_idle_dead() is in idle.c, which makes sense, but it's inside a CONFIG_HOTPLUG_CPU block. It would be more at home in smp.c, inside the existing CONFIG_HOTPLUG_CPU block. Note that CONFIG_HOTPLUG_CPU depends on CONFIG_SMP so even though smp.c is not built for SMP=n builds, that's fine. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200819015634.1974478-1-mpe@ellerman.id.au
-
Michael Ellerman authored
Sparse warns about all the init functions: symbol init_ppc970_pmu was not declared. Should it be static? symbol init_power5p_pmu was not declared. Should it be static? symbol init_power5_pmu was not declared. Should it be static? symbol init_power6_pmu was not declared. Should it be static? symbol init_power7_pmu was not declared. Should it be static? symbol init_power9_pmu was not declared. Should it be static? symbol init_power8_pmu was not declared. Should it be static? symbol init_generic_compat_pmu was not declared. Should it be static? They're already declared in internal.h, so just make sure all the C files include that directly or indirectly. Signed-off-by:
Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://lore.kernel.org/r/20200916115637.3100484-2-mpe@ellerman.id.au
-
Michael Ellerman authored
Sparse says: symbol slb_setup_new_exec was not declared. Should it be static? No, it should have a declaration in a header, add one. Signed-off-by:
-
Liu Shixin authored
Use DEFINE_SEQ_ATTRIBUTE macro to simplify the code. Signed-off-by:
Liu Shixin <liushixin2@huawei.com> Signed-off-by:
-
Yang Yingliang authored
Fix link error when CONFIG_PPC_RADIX_MMU is disabled: powerpc64-linux-gnu-ld: arch/powerpc/platforms/pseries/lpar.o:(.toc+0x0): undefined reference to `mmu_pid_bits' Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Michael Ellerman authored
Merge Nick's series to add ARCH_WANT_IRQS_OFF_ACTIVATE_MM.
-
Michael Ellerman authored
Clang, and GCC with -Wmaybe-uninitialized, can't see that val is unused in get_fpexec_mode(): arch/powerpc/kernel/process.c:1940:7: error: variable 'val' is used uninitialized whenever 'if' condition is true if (cpu_has_feature(CPU_FTR_SPE)) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ We know that CPU_FTR_SPE will only be true iff CONFIG_SPE is also true, but the compiler doesn't. Avoid it by initialising val to zero. Reported-by:kernel test robot <lkp@intel.com> Fixes: 532ed190 ("powerpc/process: Remove useless #ifdef CONFIG_SPE") Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Tested-by:
-
- 16 Sep, 2020 23 commits
-
-
Michael Ellerman authored
From Srikar's cover letter, with some reformatting: Cleanup of existing powerpc topologies and add coregroup support on powerpc. Coregroup is a group of (subset of) cores of a DIE that share a resource. Summary of some of the testing done with coregroup patchset. It includes ebizzy, schbench, perf bench sched pipe and topology verification. On the left side are results from powerpc/next tree and on the right are the results with the patchset applied. Topological verification clearly shows that there is no change in topology with and without the patches on all the 3 class of systems that were tested. Power 9 PowerNV (2 Node/ 160 Cpu System) ---------------------------------------- Baseline Baseline + Coregroup Support N Min Max Median Avg Stddev N Min Max Median Avg Stddev 100 993884 1276090 1173476 1165914 54867.201 100 910470 1279820 1171095 1162091 67363.28 ^ ebizzy (Throughput of 100 iterations of 30 seconds higher throughput is better) schbench (latency hence lower is better) Latency percentiles (usec) Latency percentiles (usec) 50.0th: 455 50.0th: 454 75.0th: 533 75.0th: 543 90.0th: 683 90.0th: 701 95.0th: 743 95.0th: 737 *99.0th: 815 *99.0th: 805 99.5th: 839 99.5th: 835 99.9th: 913 99.9th: 893 min=0, max=1011 min=0, max=2833 perf bench sched pipe (lesser time and higher ops/sec is better) Running 'sched/pipe' benchmark: Running 'sched/pipe' benchmark: Executed 1000000 pipe operations between two processes Executed 1000000 pipe operations between two processes Total time: 6.083 [sec] Total time: 6.303 [sec] 6.083576 usecs/op 6.303318 usecs/op 164377 ops/sec 158646 ops/sec Power 9 LPAR (2 Node/ 128 Cpu System) ------------------------------------- Baseline Baseline + Coregroup Support N Min Max Median Avg Stddev N Min Max Median Avg Stddev 100 1058029 1295393 1200414 1188306.7 56786.538 100 943264 1287619 1180522 1168473.2 64469.955 ^ ebizzy (Throughput of 100 iterations of 30 seconds higher throughput is better) schbench (latency hence lower is better) Latency percentiles (usec) Latency percentiles (usec) 50.0000th: 34 50.0000th: 39 75.0000th: 46 75.0000th: 52 90.0000th: 53 90.0000th: 68 95.0000th: 56 95.0000th: 77 *99.0000th: 61 *99.0000th: 89 99.5000th: 63 99.5000th: 94 99.9000th: 81 99.9000th: 169 min=0, max=8405 min=0, max=23674 perf bench sched pipe (lesser time and higher ops/sec is better) Running 'sched/pipe' benchmark: Running 'sched/pipe' benchmark: Executed 1000000 pipe operations between two processes Executed 1000000 pipe operations between two processes Total time: 8.768 [sec] Total time: 5.217 [sec] 8.768400 usecs/op 5.217625 usecs/op 114045 ops/sec 191658 ops/sec Power 8 LPAR (8 Node/ 256 Cpu System) ------------------------------------- Baseline Baseline + Coregroup Support N Min Max Median Avg Stddev N Min Max Median Avg Stddev 100 1267615 1965234 1707423 1689137.6 144363.29 100 1175357 1924262 1691104 1664792.1 145876.4 ^ ebizzy (Throughput of 100 iterations of 30 seconds higher throughput is better) schbench (latency hence lower is better) Latency percentiles (usec) Latency percentiles (usec) 50.0th: 37 50.0th: 36 75.0th: 51 75.0th: 48 90.0th: 59 90.0th: 55 95.0th: 63 95.0th: 59 *99.0th: 71 *99.0th: 67 99.5th: 75 99.5th: 72 99.9th: 105 99.9th: 170 min=0, max=18560 min=0, max=27031 perf bench sched pipe (lesser time and higher ops/sec is better) Running 'sched/pipe' benchmark: Running 'sched/pipe' benchmark: Executed 1000000 pipe operations between two processes Executed 1000000 pipe operations between two processes Total time: 6.013 [sec] Total time: 5.930 [sec] 6.013963 usecs/op 5.930724 usecs/op 166279 ops/sec 168613 ops/sec Topology verification on Power9 Power9 / powernv / SMT4 $ tail /proc/cpuinfo cpu : POWER9, altivec supported clock : 3600.000000MHz revision : 2.2 (pvr 004e 1202) timebase : 512000000 platform : PowerNV model : 9006-22P machine : PowerNV 9006-22P firmware : OPAL MMU : Radix Baseline Baseline + Coregroup Support lscpu lscpu ------ ------ Architecture: ppc64le Architecture: ppc64le Byte Order: Little Endian Byte Order: Little Endian CPU(s): 160 CPU(s): 160 On-line CPU(s) list: 0-159 On-line CPU(s) list: 0-159 Thread(s) per core: 4 Thread(s) per core: 4 Core(s) per socket: 20 Core(s) per socket: 20 Socket(s): 2 Socket(s): 2 NUMA node(s): 2 NUMA node(s): 2 Model: 2.2 (pvr 004e 1202) Model: 2.2 (pvr 004e 1202) Model name: POWER9, altivec supported Model name: POWER9, altivec supported CPU max MHz: 3800.0000 CPU max MHz: 3800.0000 CPU min MHz: 2166.0000 CPU min MHz: 2166.0000 L1d cache: 32K L1d cache: 32K L1i cache: 32K L1i cache: 32K L2 cache: 512K L2 cache: 512K L3 cache: 10240K L3 cache: 10240K NUMA node0 CPU(s): 0-79 NUMA node0 CPU(s): 0-79 NUMA node8 CPU(s): 80-159 NUMA node8 CPU(s): 80-159 grep . /proc/sys/kernel/sched_domain/cpu0/domain*/name grep . /proc/sys/kernel/sched_domain/cpu0/domain*/name ----------------------------------------------------- ----------------------------------------------------- /proc/sys/kernel/sched_domain/cpu0/domain0/name:SMT /proc/sys/kernel/sched_domain/cpu0/domain0/name:SMT /proc/sys/kernel/sched_domain/cpu0/domain1/name:CACHE /proc/sys/kernel/sched_domain/cpu0/domain1/name:CACHE /proc/sys/kernel/sched_domain/cpu0/domain2/name:DIE /proc/sys/kernel/sched_domain/cpu0/domain2/name:DIE /proc/sys/kernel/sched_domain/cpu0/domain3/name:NUMA /proc/sys/kernel/sched_domain/cpu0/domain3/name:NUMA grep . /proc/sys/kernel/sched_domain/cpu0/domain*/flags grep . /proc/sys/kernel/sched_domain/cpu0/domain*/flags ------------------------------------------------------ ------------------------------------------------------ /proc/sys/kernel/sched_domain/cpu0/domain0/flags:2391 /proc/sys/kernel/sched_domain/cpu0/domain0/flags:2391 /proc/sys/kernel/sched_domain/cpu0/domain1/flags:2327 /proc/sys/kernel/sched_domain/cpu0/domain1/flags:2327 /proc/sys/kernel/sched_domain/cpu0/domain2/flags:2071 /proc/sys/kernel/sched_domain/cpu0/domain2/flags:2071 /proc/sys/kernel/sched_domain/cpu0/domain3/flags:12801 /proc/sys/kernel/sched_domain/cpu0/domain3/flags:12801 Baseline head /proc/schedstat -------------------- version 15 timestamp 4295043536 cpu0 0 0 0 0 0 0 9597119314 2408913694 11897 domain0 00000000,00000000,00000000,00000000,0000000f 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain1 00000000,00000000,00000000,00000000,000000ff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain2 00000000,00000000,0000ffff,ffffffff,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain3 ffffffff,ffffffff,ffffffff,ffffffff,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 cpu1 0 0 0 0 0 0 4941435230 11106132 1583 domain0 00000000,00000000,00000000,00000000,0000000f 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain1 00000000,00000000,00000000,00000000,000000ff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Baseline + Coregroup Support head /proc/schedstat -------------------- version 15 timestamp 4296311826 cpu0 0 0 0 0 0 0 3353674045024 3781680865826 297483 domain0 00000000,00000000,00000000,00000000,0000000f 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain1 00000000,00000000,00000000,00000000,000000ff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain2 00000000,00000000,0000ffff,ffffffff,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain3 ffffffff,ffffffff,ffffffff,ffffffff,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 cpu1 0 0 0 0 0 0 3337873293332 4231590033856 229090 domain0 00000000,00000000,00000000,00000000,0000000f 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain1 00000000,00000000,00000000,00000000,000000ff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Post sudo ppc64_cpu --smt=1 Post sudo ppc64_cpu --smt=1 --------------------- --------------------- grep . /proc/sys/kernel/sched_domain/cpu0/domain*/name grep . /proc/sys/kernel/sched_domain/cpu0/domain*/name ----------------------------------------------------- ----------------------------------------------------- /proc/sys/kernel/sched_domain/cpu0/domain0/name:CACHE /proc/sys/kernel/sched_domain/cpu0/domain0/name:CACHE /proc/sys/kernel/sched_domain/cpu0/domain1/name:DIE /proc/sys/kernel/sched_domain/cpu0/domain1/name:DIE /proc/sys/kernel/sched_domain/cpu0/domain2/name:NUMA /proc/sys/kernel/sched_domain/cpu0/domain2/name:NUMA grep . /proc/sys/kernel/sched_domain/cpu0/domain*/flags grep . /proc/sys/kernel/sched_domain/cpu0/domain*/flags ------------------------------------------------------ ------------------------------------------------------ /proc/sys/kernel/sched_domain/cpu0/domain0/flags:2327 /proc/sys/kernel/sched_domain/cpu0/domain0/flags:2327 /proc/sys/kernel/sched_domain/cpu0/domain1/flags:2071 /proc/sys/kernel/sched_domain/cpu0/domain1/flags:2071 /proc/sys/kernel/sched_domain/cpu0/domain2/flags:12801 /proc/sys/kernel/sched_domain/cpu0/domain2/flags:12801 Baseline: head /proc/schedstat -------------------- version 15 timestamp 4295046242 cpu0 0 0 0 0 0 0 10978610020 2658997390 13068 domain0 00000000,00000000,00000000,00000000,00000011 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain1 00000000,00000000,00001111,11111111,11111111 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain2 91111111,11111111,11111111,11111111,11111111 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 cpu4 0 0 0 0 0 0 5408663896 95701034 7697 domain0 00000000,00000000,00000000,00000000,00000011 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain1 00000000,00000000,00001111,11111111,11111111 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain2 91111111,11111111,11111111,11111111,11111111 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Baseline + Coregroup Support head /proc/schedstat -------------------- version 15 timestamp 4296314905 cpu0 0 0 0 0 0 0 3355392013536 3781975150576 298723 domain0 00000000,00000000,00000000,00000000,00000011 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain1 00000000,00000000,00001111,11111111,11111111 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain2 91111111,11111111,11111111,11111111,11111111 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 cpu4 0 0 0 0 0 0 3351637920996 4427329763050 256776 domain0 00000000,00000000,00000000,00000000,00000011 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain1 00000000,00000000,00001111,11111111,11111111 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain2 91111111,11111111,11111111,11111111,11111111 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Similar verification was done on Power 8 (8 Node 256 CPU LPAR) and Power 9 (2 node 128 Cpu LPAR) and they showed the topology before and after the patch to be identical. If Interested, I could provide the same. On Power 9 (with device-tree enablement to show coregroups): $ tail /proc/cpuinfo processor : 127 cpu : POWER9 (architected), altivec supported clock : 3000.000000MHz revision : 2.2 (pvr 004e 0202) timebase : 512000000 platform : pSeries model : IBM,9008-22L machine : CHRP IBM,9008-22L MMU : Hash Before patchset: $ cat /proc/sys/kernel/sched_domain/cpu0/domain*/name SMT CACHE DIE NUMA $ head /proc/schedstat version 15 timestamp 4318242208 cpu0 0 0 0 0 0 0 28077107004 4773387362 78205 domain0 00000000,00000000,00000000,00000055 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain1 00000000,00000000,00000000,000000ff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain2 00000000,00000000,ffffffff,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain3 ffffffff,ffffffff,ffffffff,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 cpu1 0 0 0 0 0 0 24177439200 413887604 75393 domain0 00000000,00000000,00000000,000000aa 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain1 00000000,00000000,00000000,000000ff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 After patchset: $ cat /proc/sys/kernel/sched_domain/cpu0/domain*/name SMT CACHE MC DIE NUMA $ head /proc/schedstat version 15 timestamp 4318242208 cpu0 0 0 0 0 0 0 28077107004 4773387362 78205 domain0 00000000,00000000,00000000,00000055 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain1 00000000,00000000,00000000,000000ff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain2 00000000,00000000,00000000,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain3 00000000,00000000,ffffffff,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 domain4 ffffffff,ffffffff,ffffffff,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 cpu1 0 0 0 0 0 0 24177439200 413887604 75393 domain0 00000000,00000000,00000000,000000aa 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -
Srikar Dronamraju authored
Lookup the coregroup id from the associativity array. If unable to detect the coregroup id, fallback on the core id. This way, ensure sched_domain degenerates and an extra sched domain is not created. Ideally this function should have been implemented in arch/powerpc/kernel/smp.c. However if its implemented in mm/numa.c, we don't need to find the primary domain again. If the device-tree mentions more than one coregroup, then kernel implements only the last or the smallest coregroup, which currently corresponds to the penultimate domain in the device-tree. Signed-off-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Reviewed-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
-
Srikar Dronamraju authored
Add percpu coregroup maps and masks to create coregroup domain. If a coregroup doesn't exist, the coregroup domain will be degenerated in favour of SMT/CACHE domain. Do note this patch is only creating stubs for cpu_to_coregroup_id. The actual cpu_to_coregroup_id implementation would be in a subsequent patch. Signed-off-by:
-
Srikar Dronamraju authored
If allocated earlier and the search fails, then cpu_l1_cache_map cpumask is unnecessarily cleared. However cpu_l1_cache_map can be allocated / cleared after we search thread group. Please note CONFIG_CPUMASK_OFFSTACK is not set on Powerpc. Hence cpumask allocated by zalloc_cpumask_var_node is never freed. Signed-off-by:
-
Srikar Dronamraju authored
Add support for grouping cores based on the device-tree classification. - The last domain in the associativity domains always refers to the core. - If primary reference domain happens to be the penultimate domain in the associativity domains device-tree property, then there are no coregroups. However if its not a penultimate domain, then there are coregroups. There can be more than one coregroup. For now we would be interested in the last or the smallest coregroups, i.e one sub-group per DIE. Currently there are no firmwares that are exposing this grouping. Hence allow the basis for grouping to be abstract. Once the firmware starts using this grouping, code would be added to detect the type of grouping and adjust the sd domain flags accordingly. Signed-off-by:
-
Srikar Dronamraju authored
In start_secondary, even if shared_cache was already set, system does a redundant match for cpumask. This redundant check can be removed by checking if shared_cache is already set. While here, localize the sibling_mask variable to within the if condition. Signed-off-by:
-
Srikar Dronamraju authored
Current code assumes that cpumask of cpus sharing a l2-cache mask will always be a superset of cpu_sibling_mask. Lets stop that assumption. cpu_l2_cache_mask is a superset of cpu_sibling_mask if and only if shared_caches is set. Reviewed-by:
-
Srikar Dronamraju authored
Move topology fixup based on the platform attributes into its own function which is called just before set_sched_topology. Signed-off-by:
-
Srikar Dronamraju authored
Just moving the powerpc_topology description above. This will help in using functions in this file and avoid declarations. No other functional changes Signed-off-by:
-
Srikar Dronamraju authored
A new sched_domain_topology_level was added just for Power9. However the same can be achieved by merging powerpc_topology with power9_topology and makes the code more simpler especially when adding a new sched domain. Signed-off-by:
-
Srikar Dronamraju authored
Fix a build warning in a non CONFIG_NEED_MULTIPLE_NODES "error: _numa_cpu_lookup_table_ undeclared" Signed-off-by:
-
Srikar Dronamraju authored
Currently Linux kernel with CONFIG_NUMA on a system with multiple possible nodes, marks node 0 as online at boot. However in practice, there are systems which have node 0 as memoryless and cpuless. This can cause numa_balancing to be enabled on systems with only one node with memory and CPUs. The existence of this dummy node which is cpuless and memoryless node can confuse users/scripts looking at output of lscpu / numactl. By marking, node 0 as offline, lets stop assuming that node 0 is always online. If node 0 has CPU or memory that are online, node 0 will again be set as online. v5.8 available: 2 nodes (0,2) node 0 cpus: node 0 size: 0 MB node 0 free: 0 MB node 2 cpus: 0 1 2 3 4 5 6 7 node 2 size: 32625 MB node 2 free: 31490 MB node distances: node 0 2 0: 10 20 2: 20 10 proc and sys files ------------------ /sys/devices/system/node/online: 0,2 /proc/sys/kernel/numa_balancing: 1 /sys/devices/system/node/has_cpu: 2 /sys/devices/system/node/has_memory: 2 /sys/devices/system/node/has_normal_memory: 2 /sys/devices/system/node/possible: 0-31 v5.8 + patch ------------------ available: 1 nodes (2) node 2 cpus: 0 1 2 3 4 5 6 7 node 2 size: 32625 MB node 2 free: 31487 MB node distances: node 2 2: 10 proc and sys files ------------------ /sys/devices/system/node/online: 2 /proc/sys/kernel/numa_balancing: 0 /sys/devices/system/node/has_cpu: 2 /sys/devices/system/node/has_memory: 2 /sys/devices/system/node/has_normal_memory: 2 /sys/devices/system/node/possible: 0-31 Example of a node with online CPUs/memory on node 0. (Same o/p with and without patch) numactl -H available: 4 nodes (0-3) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 node 0 size: 32482 MB node 0 free: 22994 MB node 1 cpus: 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 node 1 size: 0 MB node 1 free: 0 MB node 2 cpus: 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 node 2 size: 0 MB node 2 free: 0 MB node 3 cpus: 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 node 3 size: 0 MB node 3 free: 0 MB node distances: node 0 1 2 3 0: 10 20 40 40 1: 20 10 40 40 2: 40 40 10 20 3: 40 40 20 10 Note: On Powerpc, cpu_to_node of possible but not present cpus would previously return 0. Hence this commit depends on commit ("powerpc/numa: Set numa_node for all possible cpus") and commit ("powerpc/numa: Prefer node id queried from vphn"). Without the 2 commits, Powerpc system might crash. 1. User space applications like Numactl, lscpu, that parse the sysfs tend to believe there is an extra online node. This tends to confuse users and applications. Other user space applications start believing that system was not able to use all the resources (i.e missing resources) or the system was not setup correctly. 2. Also existence of dummy node also leads to inconsistent information. The number of online nodes is inconsistent with the information in the device-tree and resource-dump 3. When the dummy node is present, single node non-Numa systems end up showing up as NUMA systems and numa_balancing gets enabled. This will mean we take the hit from the unnecessary numa hinting faults. Signed-off-by: -
Srikar Dronamraju authored
Node id queried from the static device tree may not be correct. For example: it may always show 0 on a shared processor. Hence prefer the node id queried from vphn and fallback on the device tree based node id if vphn query fails. Signed-off-by:
-
Srikar Dronamraju authored
A Powerpc system with multiple possible nodes and with CONFIG_NUMA enabled always used to have a node 0, even if node 0 does not any cpus or memory attached to it. As per PAPR, node affinity of a cpu is only available once its present / online. For all cpus that are possible but not present, cpu_to_node() would point to node 0. To ensure a cpuless, memoryless dummy node is not online, powerpc need to make sure all possible but not present cpu_to_node are set to a proper node. Signed-off-by:
-
Srikar Dronamraju authored
As per draft LoPAPR (Revision 2.9_pre7), section B.5.3 "Run Time Abstraction Services (RTAS) Node" available at: https://openpowerfoundation.org/wp-content/uploads/2020/07/LoPAR-20200611.pdf ... there are 2 device tree properties: "ibm,max-associativity-domains" which defines the maximum number of domains that the firmware i.e PowerVM can support. and: "ibm,current-associativity-domains" which defines the maximum number of domains that the current platform can support. The value of "ibm,max-associativity-domains" is always greater than or equal to "ibm,current-associativity-domains" property. If the latter property is not available, use "ibm,max-associativity-domain" as a fallback. In this yet to be released LoPAPR, "ibm,current-associativity-domains" is mentioned in page 833 / B.5.3 which is covered under under "Appendix B. System Binding" section Currently powerpc uses the "ibm,max-associativity-domains" property while setting the possible number of nodes. This is currently set at 32. However the possible number of nodes for a platform may be significantly less. Hence set the possible number of nodes based on "ibm,current-associativity-domains" property. Nathan Lynch had raised a valid concern that post LPM (Live Partition Migration), a user could DLPAR add processors and memory after LPM with "new" associativity properties: https://lore.kernel.org/linuxppc-dev/871rljfet9.fsf@linux.ibm.com/t/#u He also pointed out that "ibm,max-associativity-domains" has the same contents on all currently available PowerVM systems, unlike "ibm,current-associativity-domains" and hence may be better able to handle the new NUMA associativity properties. However with the recent commit dbce4562 ("powerpc/numa: Limit possible nodes to within num_possible_nodes"), all new NUMA associativity properties are capped to initially set nr_node_ids. Hence this commit should be safe with any new DLPAR add post LPM. $ lsprop /proc/device-tree/rtas/ibm,*associ*-domains /proc/device-tree/rtas/ibm,current-associativity-domains 00000005 00000001 00000002 00000002 00000002 00000010 /proc/device-tree/rtas/ibm,max-associativity-domains 00000005 00000001 00000008 00000020 00000020 00000100 $ cat /sys/devices/system/node/possible ##Before patch 0-31 $ cat /sys/devices/system/node/possible ##After patch 0-1 Note the maximum nodes this platform can support is only 2 but the possible nodes is set to 32. This is important because lot of kernel and user space code allocate structures for all possible nodes leading to a lot of memory that is allocated but not used. I ran a simple experiment to create and destroy 100 memory cgroups on boot on a 8 node machine (Power8 Alpine). Before patch: free -k at boot total used free shared buff/cache available Mem: 523498176 4106816 518820608 22272 570752 516606720 Swap: 4194240 0 4194240 free -k after creating 100 memory cgroups total used free shared buff/cache available Mem: 523498176 4628416 518246464 22336 623296 516058688 Swap: 4194240 0 4194240 free -k after destroying 100 memory cgroups total used free shared buff/cache available Mem: 523498176 4697408 518173760 22400 627008 515987904 Swap: 4194240 0 4194240 After patch: free -k at boot total used free shared buff/cache available Mem: 523498176 3969472 518933888 22272 594816 516731776 Swap: 4194240 0 4194240 free -k after creating 100 memory cgroups total used free shared buff/cache available Mem: 523498176 4181888 518676096 22208 640192 516496448 Swap: 4194240 0 4194240 free -k after destroying 100 memory cgroups total used free shared buff/cache available Mem: 523498176 4232320 518619904 22272 645952 516443264 Swap: 4194240 0 4194240 Observations: Fixed kernel takes 137344 kb (4106816-3969472) less to boot. Fixed kernel takes 309184 kb (4628416-4181888-137344) less to create 100 memcgs. Signed-off-by:
-
Srikar Dronamraju authored
On Power9, a pair of SMT4 cores can be presented by the firmware as a SMT8 core for backward compatibility reasons, with the fusion of two SMT4 cores. Powerpc allows LPARs to be live migrated from Power8 to Power9. Existing software developed/configured for Power8, expects to see a SMT8 core. In order to maintain userspace backward compatibility (with Power8 chips in case of Power9) in enterprise Linux systems, the topology_sibling_cpumask has to be set to SMT8 core. cpu_smt_mask() should generally point to the cpu mask of the SMT4 core. Hence override the default cpu_smt_mask() to be powerpc specific allowing for better scheduling behaviour on Power. schbench (latency measured in usecs, so lesser is better) Without patch With patch Latency percentiles (usec) Latency percentiles (usec) 50.0000th: 34 50.0000th: 38 75.0000th: 47 75.0000th: 52 90.0000th: 54 90.0000th: 60 95.0000th: 57 95.0000th: 64 *99.0000th: 62 *99.0000th: 72 99.5000th: 65 99.5000th: 75 99.9000th: 76 99.9000th: 3452 min=0, max=9205 min=0, max=9344 schbench (With Cede disabled) Without patch With patch Latency percentiles (usec) Latency percentiles (usec) 50.0000th: 20 50.0000th: 21 75.0000th: 28 75.0000th: 29 90.0000th: 33 90.0000th: 34 95.0000th: 35 95.0000th: 37 *99.0000th: 40 *99.0000th: 40 99.5000th: 48 99.5000th: 42 99.9000th: 94 99.9000th: 79 min=0, max=791 min=0, max=791 perf bench sched pipe usec/ops : lesser is better Without patch N Min Max Median Avg Stddev 101 5.095113 5.595269 5.204842 5.2298776 0.10762713 5.10 - 5.15 : ################################################## 23% (24) 5.15 - 5.20 : ############################################# 21% (22) 5.20 - 5.25 : ################################################## 23% (24) 5.25 - 5.30 : ######################### 11% (12) 5.30 - 5.35 : ########## 4% (5) 5.35 - 5.40 : ######## 3% (4) 5.40 - 5.45 : ######## 3% (4) 5.45 - 5.50 : #### 1% (2) 5.50 - 5.55 : ## 0% (1) 5.55 - 5.60 : #### 1% (2) With patch N Min Max Median Avg Stddev 101 5.134675 8.524719 5.207658 5.2780985 0.34911969 5.1 - 5.5 : ################################################## 94% (95) 5.5 - 5.8 : ## 3% (4) 5.8 - 6.2 : 0% (1) 6.2 - 6.5 : 6.5 - 6.8 : 6.8 - 7.2 : 7.2 - 7.5 : 7.5 - 7.8 : 7.8 - 8.2 : 8.2 - 8.5 : perf bench sched pipe (cede disabled) usec/ops : lesser is better Without patch N Min Max Median Avg Stddev 101 7.884227 12.576538 7.956474 8.0170722 0.46159054 7.9 - 8.4 : ################################################## 99% (100) 8.4 - 8.8 : 8.8 - 9.3 : 9.3 - 9.8 : 9.8 - 10.2 : 10.2 - 10.7 : 10.7 - 11.2 : 11.2 - 11.6 : 11.6 - 12.1 : 12.1 - 12.6 : With patch N Min Max Median Avg Stddev 101 7.956021 8.217284 8.015615 8.0283866 0.049844967 7.96 - 7.98 : ###################### 12% (13) 7.98 - 8.01 : ################################################## 28% (29) 8.01 - 8.03 : #################################### 20% (21) 8.03 - 8.06 : ######################### 14% (15) 8.06 - 8.09 : ###################### 12% (13) 8.09 - 8.11 : ###### 3% (4) 8.11 - 8.14 : ### 1% (2) 8.14 - 8.17 : ### 1% (2) 8.17 - 8.19 : 8.19 - 8.22 : # 0% (1) Observations: With the patch, the initial run/iteration takes a slight longer time. This can be attributed to the fact that now we pick a CPU from a idle core which could be sleep mode. Once we remove the cede, state the numbers improve in favour of the patch. ebizzy: transactions per second (higher is better) without patch N Min Max Median Avg Stddev 100 1018433 1304470 1193208 1182315.7 60018.733 1018433 - 1047037 : ###### 3% (3) 1047037 - 1075640 : ######## 4% (4) 1075640 - 1104244 : ######## 4% (4) 1104244 - 1132848 : ############### 7% (7) 1132848 - 1161452 : #################################### 17% (17) 1161452 - 1190055 : ########################## 12% (12) 1190055 - 1218659 : ############################################# 21% (21) 1218659 - 1247263 : ################################################## 23% (23) 1247263 - 1275866 : ######## 4% (4) 1275866 - 1304470 : ######## 4% (4) with patch N Min Max Median Avg Stddev 100 967014 1292938 1208819 1185281.8 69815.851 967014 - 999606 : ## 1% (1) 999606 - 1032199 : ## 1% (1) 1032199 - 1064791 : ############ 6% (6) 1064791 - 1097384 : ########## 5% (5) 1097384 - 1129976 : ################## 9% (9) 1129976 - 1162568 : #################### 10% (10) 1162568 - 1195161 : ########################## 13% (13) 1195161 - 1227753 : ############################################ 22% (22) 1227753 - 1260346 : ################################################## 25% (25) 1260346 - 1292938 : ############## 7% (7) Observations: Not much changes, ebizzy is not much impacted. Signed-off-by:
-
Srikar Dronamraju authored
cpu_smt_mask tracks topology_sibling_cpumask. This would be good for most architectures. One of the users of cpu_smt_mask(), would be to identify idle-cores. On Power9, a pair of SMT4 cores can be presented by the firmware as a SMT8 core for backward compatibility reasons. powerpc allows LPARs to be live migrated from Power8 to Power9. Do note Power8 had only SMT8 cores. Existing software which has been developed/configured for Power8 would expect to see SMT8 core. Maintaining the illusion of SMT8 core is a requirement to make that work. In order to maintain above userspace backward compatibility with previous versions of processor, Power9 onwards there is option to the firmware to advertise a pair of SMT4 cores as a fused cores aka SMT8 core. On Power9 this pair shares the L2 cache as well. However, from the scheduler's point of view, a core should be determined by SMT4, since its a completely independent unit of compute. Hence allow powerpc architecture to override the default cpu_smt_mask() to point to the SMT4 cores in a SMT8 mode. This will ensure the scheduler is always given the right information. Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
Wang Wensheng authored
Make kernel with `C=2`: drivers/macintosh/smu.c:1018:30: warning: symbol '__smu_get_sdb_partition' was not declared. Should it be static? Reported-by:
Wang Wensheng <wangwensheng4@huawei.com> Signed-off-by:
-
Vaibhav Jain authored
A warning is reported by the kernel in case perf_stats_show() returns an error code. The warning is of the form below: papr_scm ibm,persistent-memory:ibm,pmemory@44100001: Failed to query performance stats, Err:-10 dev_attr_show: perf_stats_show+0x0/0x1c0 [papr_scm] returned bad count fill_read_buffer: dev_attr_show+0x0/0xb0 returned bad count On investigation it looks like that the compiler is silently truncating the return value of drc_pmem_query_stats() from 'long' to 'int', since the variable used to store the return code 'rc' is an 'int'. This truncated value is then returned back as a 'ssize_t' back from perf_stats_show() to 'dev_attr_show()' which thinks of it as a large unsigned number and triggers this warning.. To fix this we update the type of variable 'rc' from 'int' to 'ssize_t' that prevents the compiler from truncating the return value of drc_pmem_query_stats() and returning correct signed value back from perf_stats_show(). Fixes: 2d02bf83 ("powerpc/papr_scm: Fetch nvdimm performance stats from PHYP") Signed-off-by:
Vaibhav Jain <vaibhav@linux.ibm.com> Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
-
Nicholas Piggin authored
Commit 0cef77c7 ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask") added a mechanism to trim the mm_cpumask of a process under certain conditions. One of the assumptions is that mm_users would not be incremented via a reference outside the process context with mmget_not_zero() then go on to kthread_use_mm() via that reference. That invariant was broken by io_uring code (see previous sparc64 fix), but I'll point Fixes: to the original powerpc commit because we are changing that assumption going forward, so this will make backports match up. Fix this by no longer relying on that assumption, but by having each CPU check the mm is not being used, and clearing their own bit from the mask only if it hasn't been switched-to by the time the IPI is processed. This relies on commit 38cf307c ("mm: fix kthread_use_mm() vs TLB invalidate") and ARCH_WANT_IRQS_OFF_ACTIVATE_MM to disable irqs over mm switch sequences. Fixes: 0cef77c7 ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask") Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Reviewed-by:
-
Nicholas Piggin authored
The de facto (and apparently uncommented) standard for using an mm had, thanks to this code in sparc if nothing else, been that you must have a reference on mm_users *and that reference must have been obtained with mmget()*, i.e., from a thread with a reference to mm_users that had used the mm. The introduction of mmget_not_zero() in commit d2005e3f ("userfaultfd: don't pin the user memory in userfaultfd_file_create()") allowed mm_count holders to aoperate on user mappings asynchronously from the actual threads using the mm, but they were not to load those mappings into their TLB (i.e., walking vmas and page tables is okay, kthread_use_mm() is not). io_uring 2b188cc1 ("Add io_uring IO interface") added code which does a kthread_use_mm() from a mmget_not_zero() refcount. The problem with this is code which previously assumed mm == current->mm and mm->mm_users == 1 implies the mm will remain single-threaded at least until this thread creates another mm_users reference, has now broken. arch/sparc/kernel/smp_64.c: if (atomic_read(&mm->mm_users) == 1) { cpumask_copy(mm_cpumask(mm), cpumask_of(cpu)); goto local_flush_and_out; } vs fs/io_uring.c if (unlikely(!(ctx->flags & IORING_SETUP_SQPOLL) || !mmget_not_zero(ctx->sqo_mm))) return -EFAULT; kthread_use_mm(ctx->sqo_mm); mmget_not_zero() could come in right after the mm_users == 1 test, then kthread_use_mm() which sets its CPU in the mm_cpumask. That update could be lost if cpumask_copy() occurs afterward. I propose we fix this by allowing mmget_not_zero() to be a first-class reference, and not have this obscure undocumented and unchecked restriction. The basic fix for sparc64 is to remove its mm_cpumask clearing code. The optimisation could be effectively restored by sending IPIs to mm_cpumask members and having them remove themselves from mm_cpumask. This is more tricky so I leave it as an exercise for someone with a sparc64 SMP. powerpc has a (currently similarly broken) example. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Nicholas Piggin authored
powerpc uses IPIs in some situations to switch a kernel thread away from a lazy tlb mm, which is subject to the TLB flushing race described in the changelog introducing ARCH_WANT_IRQS_OFF_ACTIVATE_MM. Signed-off-by:
-
Nicholas Piggin authored
Reading and modifying current->mm and current->active_mm and switching mm should be done with irqs off, to prevent races seeing an intermediate state. This is similar to commit 38cf307c ("mm: fix kthread_use_mm() vs TLB invalidate"). At exec-time when the new mm is activated, the old one should usually be single-threaded and no longer used, unless something else is holding an mm_users reference (which may be possible). Absent other mm_users, there is also a race with preemption and lazy tlb switching. Consider the kernel_execve case where the current thread is using a lazy tlb active mm: call_usermodehelper() kernel_execve() old_mm = current->mm; active_mm = current->active_mm; *** preempt *** --------------------> schedule() prev->active_mm = NULL; mmdrop(prev active_mm); ... <-------------------- schedule() current->mm = mm; current->active_mm = mm; if (!old_mm) mmdrop(active_mm); If we switch back to the kernel thread from a different mm, there is a double free of the old active_mm, and a missing free of the new one. Closing this race only requires interrupts to be disabled while ->mm and ->active_mm are being switched, but the TLB problem requires also holding interrupts off over activate_mm. Unfortunately not all archs can do that yet, e.g., arm defers the switch if irqs are disabled and expects finish_arch_post_lock_switch() to be called to complete the flush; um takes a blocking lock in activate_mm(). So as a first step, disable interrupts across the mm/active_mm updates to close the lazy tlb preempt race, and provide an arch option to extend that to activate_mm which allows architectures doing IPI based TLB shootdowns to close the second race. This is a bit ugly, but in the interest of fixing the bug and backporting before all architectures are converted this is a compromise. Signed-off-by:
-
- 15 Sep, 2020 10 commits
-
-
Qinglang Miao authored
Use for_each_child_of_node() macro instead of open coding it. Signed-off-by:
Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by:
-
Cédric Le Goater authored
When a passthrough IO adapter is removed from a pseries machine using hash MMU and the XIVE interrupt mode, the POWER hypervisor expects the guest OS to clear all page table entries related to the adapter. If some are still present, the RTAS call which isolates the PCI slot returns error 9001 "valid outstanding translations" and the removal of the IO adapter fails. This is because when the PHBs are scanned, Linux maps automatically the INTx interrupts in the Linux interrupt number space but these are never removed. To solve this problem, we introduce a PPC platform specific pcibios_remove_bus() routine which clears all interrupt mappings when the bus is removed. This also clears the associated page table entries of the ESB pages when using XIVE. For this purpose, we record the logical interrupt numbers of the mapped interrupt under the PHB structure and let pcibios_remove_bus() do the clean up. Since some PCI adapters, like GPUs, use the "interrupt-map" property to describe interrupt mappings other than the legacy INTx interrupts, we can not restrict the size of the mapping array to PCI_NUM_INTX. The number of interrupt mappings is computed from the "interrupt-map" property and the mapping array is allocated accordingly. Signed-off-by:
Cédric Le Goater <clg@kaod.org> Reviewed-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Nicholas Piggin authored
This driver does not restore stop > 3 state, so it limits itself to states which do not lose full state or TB. The POWER10 SPRs are sufficiently different from P9 that it seems easier to split out the P10 code. The POWER10 deep sleep code (e.g., the BHRB restore) has been taken out, but it can be re-added when stop > 3 support is added. Signed-off-by:
Vaidyanathan Srinivasan <svaidy@linux.ibm.com> Reviewed-by: Pratik Rajesh Sampat<psampat@linux.ibm.com> Reviewed-by:
-
Aneesh Kumar K.V authored
This ensures we don't do a partial mapping of memory. With nvdimm, when creating namespaces with size not aligned to 16MB, the kernel ends up partially mapping the pages. This can result in kernel adding multiple hash page table entries for the same range. A new namespace will result in create_section_mapping() with start and end overlapping an already existing bolted hash page table entry. commit: 6acd7d5e ("libnvdimm/namespace: Enforce memremap_compat_align()") made sure that we always create namespaces aligned to 16MB. But we can do better by avoiding mapping pages that are not aligned. This helps to catch access to these partially mapped pages early. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Jason Yan authored
This addresses the following sparse warning: arch/powerpc/platforms/ps3/spu.c:451:33: warning: symbol 'spu_management_ps3_ops' was not declared. Should it be static? arch/powerpc/platforms/ps3/spu.c:592:28: warning: symbol 'spu_priv1_ps3_ops' was not declared. Should it be static? Reported-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
-
Christophe Leroy authored
Before the commit identified below, pages tables allocation was performed after the allocation of final shadow area for linear memory. But that commit switched the order, leading to page tables being already allocated at the time 8xx kasan_init_shadow_8M() is called. Due to this, kasan_init_shadow_8M() doesn't map the needed shadow entries because there are already page tables. kasan_init_shadow_8M() installs huge PMD entries instead of page tables. We could at that time free the page tables, but there is no point in creating page tables that get freed before being used. Only book3s/32 hash needs early allocation of page tables. For other variants, we can keep the initial order and create remaining page tables after the allocation of final shadow memory for linear mem. Move back the allocation of shadow page tables for CONFIG_KASAN_VMALLOC into kasan_init() after the loop which creates final shadow memory for linear mem. Fixes: 41ea93cf ("powerpc/kasan: Fix shadow pages allocation failure") Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Christophe Leroy authored
low_sleep_handler() has an hardcoded restore of segment registers that doesn't take KUAP and KUEP into account. Use head_32's load_segment_registers() routine instead. Fixes: a68c31fc ("powerpc/32s: Implement Kernel Userspace Access Protection") Fixes: 31ed2b13 ("powerpc/32s: Implement Kernel Userspace Execution Prevention.") Cc: stable@vger.kernel.org Signed-off-by:
-
Christophe Leroy authored
Add a stub for __giveup_fpu() when CONFIG_PPC_FPU is not selected, as done for CONFIG_SPE and CONFIG_ALTIVEC. This allows to remove some #ifdef CONFIG_PPC_FPU. Also change one to IS_ENABLED(). Signed-off-by:
-
Christophe Leroy authored
cpu_has_feature(CPU_FTR_SPE) returns false when CONFIG_SPE is not set. There is no need to enclose the test in an #ifdef CONFIG_SPE. Remove it. CPU_FTR_SPE only exists on 32 bits. Define it as 0 on 64 bits. We have a couple of places like: #ifdef CONFIG_SPE if (cpu_has_feature(CPU_FTR_SPE)) { do_something_that_requires_CONFIG_SPE } else { return -EINVAL; } #else return -EINVAL; #endif Replace them by a cleaner version: if (cpu_has_feature(CPU_FTR_SPE)) { #ifdef CONFIG_SPE do_something_that_requires_CONFIG_SPE #endif } else { return -EINVAL; } When CONFIG_SPE is not set, this resolves to an unconditional return of -EINVAL Signed-off-by: -
Christophe Leroy authored
cpu_has_feature(CPU_FTR_ALTIVEC) returns false when CONFIG_ALTIVEC is not set. There is no need to enclose the test in an #ifdef CONFIG_ALTIVEC. Remove it. Signed-off-by:
-
