- 02 Dec, 2021 17 commits
-
-
Jiapeng Chong authored
Eliminate the follow smatch warning: net/ipv6/ip6_offload.c:249 ipv6_gro_receive() warn: inconsistent indenting. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Li Zhijian authored
ipv6_addr_bind/ipv4_addr_bind are function names. Previously, bind test would not be run by default due to the wrong case names Fixes: 34d0302a ("selftests: Add ipv6 address bind tests to fcnal-test") Fixes: 75b2b2b3 ("selftests: Add ipv4 address bind tests to fcnal-test") Signed-off-by:
Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by:
-
William Kucharski authored
Correct an error where setting /proc/sys/net/rds/tcp/rds_tcp_rcvbuf would instead modify the socket's sk_sndbuf and would leave sk_rcvbuf untouched. Fixes: c6a58ffe ("RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket") Signed-off-by:
William Kucharski <william.kucharski@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Matt Johnston authored
We need to test against the existing route type, not the rtm_type in the netlink request. Fixes: 83f0a0b7 ("mctp: Specify route types, require rtm_type in RTM_*ROUTE messages") Signed-off-by:
Matt Johnston <matt@codeconstruct.com.au> Signed-off-by:
-
Tony Lu authored
When smc_close_final() returns error, the return code overwrites by kernel_sock_shutdown() in smc_close_active(). The return code of smc_close_final() is more important than kernel_sock_shutdown(), and it will pass to userspace directly. Fix it by keeping both return codes, if smc_close_final() raises an error, return it or kernel_sock_shutdown()'s. Link: https://lore.kernel.org/linux-s390/1f67548e-cbf6-0dce-82b5-10288a4583bd@linux.ibm.com/ Fixes: 606a63c9 ("net/smc: Ensure the active closing peer first closes clcsock") Suggested-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
Tony Lu <tonylu@linux.alibaba.com> Reviewed-by:
Wen Gu <guwen@linux.alibaba.com> Acked-by:
-
Sukadev Bhattiprolu authored
When trying to decide whether or not reuse existing rx/tx pools we tried to allow a range of values for the pool parameters rather than exact matches. This was intended to reuse the resources for instance when switching between two VIO servers with different default parameters. But this optimization is incomplete and breaks when we try to change the number of queues for instance. The optimization needs to be updated, so drop it for now and simplify the code. Fixes: bbd80930 ("ibmvnic: Reuse tx pools when possible") Reported-by:
Dany Madden <drt@linux.ibm.com> Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by:
Rick Lindsley <ricklind@linux.ibm.com> Signed-off-by:
-
Sukadev Bhattiprolu authored
When trying to decide whether or not reuse existing rx/tx pools we tried to allow a range of values for the pool parameters rather than exact matches. This was intended to reuse the resources for instance when switching between two VIO servers with different default parameters. But this optimization is incomplete and breaks when we try to change the number of queues for instance. The optimization needs to be updated, so drop it for now and simplify the code. Fixes: 489de956 ("ibmvnic: Reuse rx pools when possible") Reported-by:
-
Dust Li authored
smc_lgr_cleanup_early() meant to delete the link group from the link group list, but it deleted the list head by mistake. This may cause memory corruption since we didn't remove the real link group from the list and later memseted the link group structure. We got a list corruption panic when testing: [ 231.277259] list_del corruption. prev->next should be ffff8881398a8000, but was 0000000000000000 [ 231.278222] ------------[ cut here ]------------ [ 231.278726] kernel BUG at lib/list_debug.c:53! [ 231.279326] invalid opcode: 0000 [#1] SMP NOPTI [ 231.279803] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.10.46+ #435 [ 231.280466] Hardware name: Alibaba Cloud ECS, BIOS 8c24b4c 04/01/2014 [ 231.281248] Workqueue: events smc_link_down_work [ 231.281732] RIP: 0010:__list_del_entry_valid+0x70/0x90 [ 231.282258] Code: 4c 60 82 e8 7d cc 6a 00 0f 0b 48 89 fe 48 c7 c7 88 4c 60 82 e8 6c cc 6a 00 0f 0b 48 89 fe 48 c7 c7 c0 4c 60 82 e8 5b cc 6a 00 <0f> 0b 48 89 fe 48 c7 c7 00 4d 60 82 e8 4a cc 6a 00 0f 0b cc cc cc [ 231.284146] RSP: 0018:ffffc90000033d58 EFLAGS: 00010292 [ 231.284685] RAX: 0000000000000054 RBX: ffff8881398a8000 RCX: 0000000000000000 [ 231.285415] RDX: 0000000000000001 RSI: ffff88813bc18040 RDI: ffff88813bc18040 [ 231.286141] RBP: ffffffff8305ad40 R08: 0000000000000003 R09: 0000000000000001 [ 231.286873] R10: ffffffff82803da0 R11: ffffc90000033b90 R12: 0000000000000001 [ 231.287606] R13: 0000000000000000 R14: ffff8881398a8000 R15: 0000000000000003 [ 231.288337] FS: 0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 [ 231.289160] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 231.289754] CR2: 0000000000e72058 CR3: 000000010fa96006 CR4: 00000000003706f0 [ 231.290485] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 231.291211] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 231.291940] Call Trace: [ 231.292211] smc_lgr_terminate_sched+0x53/0xa0 [ 231.292677] smc_switch_conns+0x75/0x6b0 [ 231.293085] ? update_load_avg+0x1a6/0x590 [ 231.293517] ? ttwu_do_wakeup+0x17/0x150 [ 231.293907] ? update_load_avg+0x1a6/0x590 [ 231.294317] ? newidle_balance+0xca/0x3d0 [ 231.294716] smcr_link_down+0x50/0x1a0 [ 231.295090] ? __wake_up_common_lock+0x77/0x90 [ 231.295534] smc_link_down_work+0x46/0x60 [ 231.295933] process_one_work+0x18b/0x350 Fixes: a0a62ee1 ("net/smc: separate locks for SMCD and SMCR link group lists") Signed-off-by:
Dust Li <dust.li@linux.alibaba.com> Acked-by:
-
Xiayu Zhang authored
The description of ETH_P_802_3_MIN is misleading. The value of EthernetType in Ethernet II frame is more than 0x0600, the value of Length in 802.3 frame is less than 0x0600. Signed-off-by:
Xiayu Zhang <Xiayu.Zhang@mediatek.com> Signed-off-by:
-
Tianhao Chai authored
Apple M1 Mac minis (2020) with 10GE NICs do not have MAC address in the card, but instead need to obtain MAC addresses from the device tree. In this case the hardware will report an invalid MAC. Currently atlantic driver does not query the DT for MAC address and will randomly assign a MAC if the NIC doesn't have a permanent MAC burnt in. This patch causes the driver to perfer a valid MAC address from OF (if present) over HW self-reported MAC and only fall back to a random MAC address when neither of them is valid. Signed-off-by:
Tianhao Chai <cth451@gmail.com> Reviewed-by:
Igor Russkikh <irusskikh@marvell.com> Reviewed-by:
Hector Martin <marcan@marcan.st> Signed-off-by:
-
Eric Dumazet authored
Before commit faa041a4 ("ipv4: Create cleanup helper for fib_nh") changes to net->ipv4.fib_num_tclassid_users were protected by RTNL. After the change, this is no longer the case, as free_fib_info_rcu() runs after rcu grace period, without rtnl being held. Fixes: faa041a4 ("ipv4: Create cleanup helper for fib_nh") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: David Ahern <dsahern@kernel.org> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Eric Dumazet authored
A recent change triggers a KMSAN warning, because request sockets do not initialize @sk_rx_queue_mapping field. Add sk_rx_queue_update() helper to make our intent clear. BUG: KMSAN: uninit-value in sk_rx_queue_set include/net/sock.h:1922 [inline] BUG: KMSAN: uninit-value in tcp_conn_request+0x3bcc/0x4dc0 net/ipv4/tcp_input.c:6922 sk_rx_queue_set include/net/sock.h:1922 [inline] tcp_conn_request+0x3bcc/0x4dc0 net/ipv4/tcp_input.c:6922 tcp_v4_conn_request+0x218/0x2a0 net/ipv4/tcp_ipv4.c:1528 tcp_rcv_state_process+0x2c5/0x3290 net/ipv4/tcp_input.c:6406 tcp_v4_do_rcv+0xb4e/0x1330 net/ipv4/tcp_ipv4.c:1738 tcp_v4_rcv+0x468d/0x4ed0 net/ipv4/tcp_ipv4.c:2100 ip_protocol_deliver_rcu+0x760/0x10b0 net/ipv4/ip_input.c:204 ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ip_local_deliver+0x584/0x8c0 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:460 [inline] ip_sublist_rcv_finish net/ipv4/ip_input.c:551 [inline] ip_list_rcv_finish net/ipv4/ip_input.c:601 [inline] ip_sublist_rcv+0x11fd/0x1520 net/ipv4/ip_input.c:609 ip_list_rcv+0x95f/0x9a0 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5505 [inline] __netif_receive_skb_list_core+0xe34/0x1240 net/core/dev.c:5553 __netif_receive_skb_list+0x7fc/0x960 net/core/dev.c:5605 netif_receive_skb_list_internal+0x868/0xde0 net/core/dev.c:5696 gro_normal_list net/core/dev.c:5850 [inline] napi_complete_done+0x579/0xdd0 net/core/dev.c:6587 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0x17b6/0x2350 drivers/net/virtio_net.c:1557 __napi_poll+0x14e/0xbc0 net/core/dev.c:7020 napi_poll net/core/dev.c:7087 [inline] net_rx_action+0x824/0x1880 net/core/dev.c:7174 __do_softirq+0x1fe/0x7eb kernel/softirq.c:558 invoke_softirq+0xa4/0x130 kernel/softirq.c:432 __irq_exit_rcu kernel/softirq.c:636 [inline] irq_exit_rcu+0x76/0x130 kernel/softirq.c:648 common_interrupt+0xb6/0xd0 arch/x86/kernel/irq.c:240 asm_common_interrupt+0x1e/0x40 smap_restore arch/x86/include/asm/smap.h:67 [inline] get_shadow_origin_ptr mm/kmsan/instrumentation.c:31 [inline] __msan_metadata_ptr_for_load_1+0x28/0x30 mm/kmsan/instrumentation.c:63 tomoyo_check_acl+0x1b0/0x630 security/tomoyo/domain.c:173 tomoyo_path_permission security/tomoyo/file.c:586 [inline] tomoyo_check_open_permission+0x61f/0xe10 security/tomoyo/file.c:777 tomoyo_file_open+0x24f/0x2d0 security/tomoyo/tomoyo.c:311 security_file_open+0xb1/0x1f0 security/security.c:1635 do_dentry_open+0x4e4/0x1bf0 fs/open.c:809 vfs_open+0xaf/0xe0 fs/open.c:957 do_open fs/namei.c:3426 [inline] path_openat+0x52f1/0x5dd0 fs/namei.c:3559 do_filp_open+0x306/0x760 fs/namei.c:3586 do_sys_openat2+0x263/0x8f0 fs/open.c:1212 do_sys_open fs/open.c:1228 [inline] __do_sys_open fs/open.c:1236 [inline] __se_sys_open fs/open.c:1232 [inline] __x64_sys_open+0x314/0x380 fs/open.c:1232 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: __alloc_pages+0xbc7/0x10a0 mm/page_alloc.c:5409 alloc_pages+0x8a5/0xb80 alloc_slab_page mm/slub.c:1810 [inline] allocate_slab+0x287/0x1c20 mm/slub.c:1947 new_slab mm/slub.c:2010 [inline] ___slab_alloc+0xbdf/0x1e90 mm/slub.c:3039 __slab_alloc mm/slub.c:3126 [inline] slab_alloc_node mm/slub.c:3217 [inline] slab_alloc mm/slub.c:3259 [inline] kmem_cache_alloc+0xbb3/0x11c0 mm/slub.c:3264 reqsk_alloc include/net/request_sock.h:91 [inline] inet_reqsk_alloc+0xaf/0x8b0 net/ipv4/tcp_input.c:6712 tcp_conn_request+0x910/0x4dc0 net/ipv4/tcp_input.c:6852 tcp_v4_conn_request+0x218/0x2a0 net/ipv4/tcp_ipv4.c:1528 tcp_rcv_state_process+0x2c5/0x3290 net/ipv4/tcp_input.c:6406 tcp_v4_do_rcv+0xb4e/0x1330 net/ipv4/tcp_ipv4.c:1738 tcp_v4_rcv+0x468d/0x4ed0 net/ipv4/tcp_ipv4.c:2100 ip_protocol_deliver_rcu+0x760/0x10b0 net/ipv4/ip_input.c:204 ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ip_local_deliver+0x584/0x8c0 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:460 [inline] ip_sublist_rcv_finish net/ipv4/ip_input.c:551 [inline] ip_list_rcv_finish net/ipv4/ip_input.c:601 [inline] ip_sublist_rcv+0x11fd/0x1520 net/ipv4/ip_input.c:609 ip_list_rcv+0x95f/0x9a0 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5505 [inline] __netif_receive_skb_list_core+0xe34/0x1240 net/core/dev.c:5553 __netif_receive_skb_list+0x7fc/0x960 net/core/dev.c:5605 netif_receive_skb_list_internal+0x868/0xde0 net/core/dev.c:5696 gro_normal_list net/core/dev.c:5850 [inline] napi_complete_done+0x579/0xdd0 net/core/dev.c:6587 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0x17b6/0x2350 drivers/net/virtio_net.c:1557 __napi_poll+0x14e/0xbc0 net/core/dev.c:7020 napi_poll net/core/dev.c:7087 [inline] net_rx_action+0x824/0x1880 net/core/dev.c:7174 __do_softirq+0x1fe/0x7eb kernel/softirq.c:558 Fixes: 342159ee ("net: avoid dirtying sk->sk_rx_queue_mapping") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20211130182939.2584764-1-eric.dumazet@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
syzbot found that __dev_queue_xmit() is reading txq->xmit_lock_owner without annotations. No serious issue there, let's document what is happening there. BUG: KCSAN: data-race in __dev_queue_xmit / __dev_queue_xmit write to 0xffff888139d09484 of 4 bytes by interrupt on cpu 0: __netif_tx_unlock include/linux/netdevice.h:4437 [inline] __dev_queue_xmit+0x948/0xf70 net/core/dev.c:4229 dev_queue_xmit_accel+0x19/0x20 net/core/dev.c:4265 macvlan_queue_xmit drivers/net/macvlan.c:543 [inline] macvlan_start_xmit+0x2b3/0x3d0 drivers/net/macvlan.c:567 __netdev_start_xmit include/linux/netdevice.h:4987 [inline] netdev_start_xmit include/linux/netdevice.h:5001 [inline] xmit_one+0x105/0x2f0 net/core/dev.c:3590 dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606 sch_direct_xmit+0x1b2/0x7c0 net/sched/sch_generic.c:342 __dev_xmit_skb+0x83d/0x1370 net/core/dev.c:3817 __dev_queue_xmit+0x590/0xf70 net/core/dev.c:4194 dev_queue_xmit+0x13/0x20 net/core/dev.c:4259 neigh_hh_output include/net/neighbour.h:511 [inline] neigh_output include/net/neighbour.h:525 [inline] ip6_finish_output2+0x995/0xbb0 net/ipv6/ip6_output.c:126 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] ip6_finish_output+0x444/0x4c0 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ndisc_send_skb+0x486/0x610 net/ipv6/ndisc.c:508 ndisc_send_rs+0x3b0/0x3e0 net/ipv6/ndisc.c:702 addrconf_rs_timer+0x370/0x540 net/ipv6/addrconf.c:3898 call_timer_fn+0x2e/0x240 kernel/time/timer.c:1421 expire_timers+0x116/0x240 kernel/time/timer.c:1466 __run_timers+0x368/0x410 kernel/time/timer.c:1734 run_timer_softirq+0x2e/0x60 kernel/time/timer.c:1747 __do_softirq+0x158/0x2de kernel/softirq.c:558 __irq_exit_rcu kernel/softirq.c:636 [inline] irq_exit_rcu+0x37/0x70 kernel/softirq.c:648 sysvec_apic_timer_interrupt+0x3e/0xb0 arch/x86/kernel/apic/apic.c:1097 asm_sysvec_apic_timer_interrupt+0x12/0x20 read to 0xffff888139d09484 of 4 bytes by interrupt on cpu 1: __dev_queue_xmit+0x5e3/0xf70 net/core/dev.c:4213 dev_queue_xmit_accel+0x19/0x20 net/core/dev.c:4265 macvlan_queue_xmit drivers/net/macvlan.c:543 [inline] macvlan_start_xmit+0x2b3/0x3d0 drivers/net/macvlan.c:567 __netdev_start_xmit include/linux/netdevice.h:4987 [inline] netdev_start_xmit include/linux/netdevice.h:5001 [inline] xmit_one+0x105/0x2f0 net/core/dev.c:3590 dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606 sch_direct_xmit+0x1b2/0x7c0 net/sched/sch_generic.c:342 __dev_xmit_skb+0x83d/0x1370 net/core/dev.c:3817 __dev_queue_xmit+0x590/0xf70 net/core/dev.c:4194 dev_queue_xmit+0x13/0x20 net/core/dev.c:4259 neigh_resolve_output+0x3db/0x410 net/core/neighbour.c:1523 neigh_output include/net/neighbour.h:527 [inline] ip6_finish_output2+0x9be/0xbb0 net/ipv6/ip6_output.c:126 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] ip6_finish_output+0x444/0x4c0 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ndisc_send_skb+0x486/0x610 net/ipv6/ndisc.c:508 ndisc_send_rs+0x3b0/0x3e0 net/ipv6/ndisc.c:702 addrconf_rs_timer+0x370/0x540 net/ipv6/addrconf.c:3898 call_timer_fn+0x2e/0x240 kernel/time/timer.c:1421 expire_timers+0x116/0x240 kernel/time/timer.c:1466 __run_timers+0x368/0x410 kernel/time/timer.c:1734 run_timer_softirq+0x2e/0x60 kernel/time/timer.c:1747 __do_softirq+0x158/0x2de kernel/softirq.c:558 __irq_exit_rcu kernel/softirq.c:636 [inline] irq_exit_rcu+0x37/0x70 kernel/softirq.c:648 sysvec_apic_timer_interrupt+0x8d/0xb0 arch/x86/kernel/apic/apic.c:1097 asm_sysvec_apic_timer_interrupt+0x12/0x20 kcsan_setup_watchpoint+0x94/0x420 kernel/kcsan/core.c:443 folio_test_anon include/linux/page-flags.h:581 [inline] PageAnon include/linux/page-flags.h:586 [inline] zap_pte_range+0x5ac/0x10e0 mm/memory.c:1347 zap_pmd_range mm/memory.c:1467 [inline] zap_pud_range mm/memory.c:1496 [inline] zap_p4d_range mm/memory.c:1517 [inline] unmap_page_range+0x2dc/0x3d0 mm/memory.c:1538 unmap_single_vma+0x157/0x210 mm/memory.c:1583 unmap_vmas+0xd0/0x180 mm/memory.c:1615 exit_mmap+0x23d/0x470 mm/mmap.c:3170 __mmput+0x27/0x1b0 kernel/fork.c:1113 mmput+0x3d/0x50 kernel/fork.c:1134 exit_mm+0xdb/0x170 kernel/exit.c:507 do_exit+0x608/0x17a0 kernel/exit.c:819 do_group_exit+0xce/0x180 kernel/exit.c:929 get_signal+0xfc3/0x1550 kernel/signal.c:2852 arch_do_signal_or_restart+0x8c/0x2e0 arch/x86/kernel/signal.c:868 handle_signal_work kernel/entry/common.c:148 [inline] exit_to_user_mode_loop kernel/entry/common.c:172 [inline] exit_to_user_mode_prepare+0x113/0x190 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300 do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0xffffffff Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 28712 Comm: syz-executor.0 Tainted: G W 5.16.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Zhou Qingyang authored
In rvu_mbox_init(), mbox_regions is not freed or passed out under the switch-default region, which could lead to a memory leak. Fix this bug by changing 'return err' to 'goto free_regions'. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_OCTEONTX2_AF=y show no new warnings, and our static analyzer no longer warns about this code. Fixes: 98c56111 (“octeontx2-af: cn10k: Add mbox support for CN10K platform”) Signed-off-by:
Zhou Qingyang <zhou1615@umn.edu> Link: https://lore.kernel.org/r/20211130165039.192426-1-zhou1615@umn.eduSigned-off-by:
-
Zhou Qingyang authored
In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv(). After that mlx4_en_alloc_resources() is called and there is a dereference of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to a use after free problem on failure of mlx4_en_copy_priv(). Fix this bug by adding a check of mlx4_en_copy_priv() This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_MLX4_EN=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: ec25bc04 ("net/mlx4_en: Add resilience in low memory systems") Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20211130164438.190591-1-zhou1615@umn.eduSigned-off-by:
-
Stephen Suryaputra authored
IPCB/IP6CB need to be initialized when processing outbound v4 or v6 pkts in the codepath of vrf device xmit function so that leftover garbage doesn't cause futher code that uses the CB to incorrectly process the pkt. One occasion of the issue might occur when MPLS route uses the vrf device as the outgoing device such as when the route is added using "ip -f mpls route add <label> dev <vrf>" command. The problems seems to exist since day one. Hence I put the day one commits on the Fixes tags. Fixes: 193125db ("net: Introduce VRF device driver") Fixes: 35402e31 ("net: Add IPv6 support to VRF device") Cc: stable@vger.kernel.org Signed-off-by:
Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by:
-
Zhou Qingyang authored
In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 7f966452 ("qlcnic: 83xx memory map and HW access routine") Signed-off-by:
-
- 01 Dec, 2021 23 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-2021-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.16 First set of fixes for v5.16. Mostly crash and driver initialisation fixes, the fix for rtw89 being most important. iwlwifi * compiler, lockdep and smatch warning fixes * fix for a rare driver initialisation failure * fix a memory leak rtw89 * fix const buffer modification causing a kernel crash mt76 * fix null pointer access * fix idr leak rt2x00 * fix driver initialisation errors, a regression since v5.2-rc1 ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5 fixes 2021-11-30 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by: -
David S. Miller authored
Marek Behún says: ==================== mv88e6xxx fixes (mainly 88E6393X family) sending v2 of these fixes. Original cover letter: So I managed to discovered how to fix inband AN for 2500base-x mode on 88E6393x (Amethyst) family. This series fixes application of erratum 4.8, adds fix for erratum 5.2, adds support for completely disablign SerDes receiver / transmitter, fixes inband AN for 2500base-x mode by using 1000base-x mode and simply changing frequeny to 3.125 GHz, all this for 88E6393X. The last commit fixes linking when link partner has AN disabled and the device invokes the AN bypass feature. Currently we fail to link in this case. Changes since v1: - fixed wrong operator in patch 3 (thanks Russell) - added more comments about why BMCR_ANENABLE is used in patch 6 (thanks Russell) - updated some return statements from if (something) return func(); return 0; to if (something) err = func(); return err; (err is set to 0 before the condition) ==================== Signed-off-by: -
Marek Behún authored
Function mv88e6xxx_serdes_pcs_get_state() currently does not report link up if AN is enabled, Link bit is set, but Speed and Duplex Resolved bit is not set, which testing shows is the case for when auto-negotiation was bypassed (we have AN enabled but link partner does not). An example of such link partner is Marvell 88X3310 PHY, when put into the mode where host interface changes between 10gbase-r, 5gbase-r, 2500base-x and sgmii according to copper speed. The 88X3310 does not enable AN in 2500base-x, and so SerDes on mv88e6xxx currently does not link with it. Fix this. Fixes: a5a6858b ("net: dsa: mv88e6xxx: extend phylink to Serdes PHYs") Signed-off-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
-
Marek Behún authored
Inband AN is broken on Amethyst in 2500base-x mode when set by standard mechanism (via cmode). (There probably is some weird setting done by default in the switch for this mode that make it cycle in some state or something, because when the peer is the mvneta controller, it receives link change interrupts every ~0.3ms, but the link is always down.) Get around this by configuring the PCS mode to 1000base-x (where inband AN works), and then changing the SerDes frequency while SerDes transmitter and receiver are disabled, before enabling SerDes PHY. After disabling SerDes PHY, change the PCS mode back to 2500base-x, to avoid confusing the device (if we leave it at 1000base-x PCS mode but with different frequency, and then change cmode to sgmii, the device won't change the frequency because it thinks it already has the correct one). The register which changes the frequency is undocumented. I discovered it by going through all registers in the ranges 4.f000-4.f100 and 1e.8000-1e.8200 for all SerDes cmodes (sgmii, 1000base-x, 2500base-x, 5gbase-r, 10gbase-r, usxgmii) and filtering out registers that didn't make sense (the value was the same for modes which have different frequency). The result of this was: reg sgmii 1000base-x 2500base-x 5gbase-r 10gbase-r usxgmii 04.f002 005b 0058 0059 005c 005d 005f 04.f076 3000 0000 1000 4000 5000 7000 04.f07c 0950 0950 1850 0550 0150 0150 1e.8000 0059 0059 0058 0055 0051 0051 1e.8140 0e20 0e20 0e28 0e21 0e42 0e42 Register 04.f002 is the documented Port Operational Confiuration register, it's last 3 bits select PCS type, so changing this register also changes the frequency to the appropriate value. Registers 04.f076 and 04.f07c are not writable. Undocumented register 1e.8000 was the one: changing bits 3:0 from 9 to 8 changed SerDes frequency to 3.125 GHz, while leaving the value of PCS mode in register 04.f002.2:0 at 1000base-x. Inband autonegotiation started working correctly. (I didn't try anything with register 1e.8140 since 1e.8000 solved the problem.) Since I don't have documentation for this register 1e.8000.3:0, I am using the constants without names, but my hypothesis is that this register selects PHY frequency. If in the future I have access to an oscilloscope able to handle these frequencies, I will try to test this hypothesis. Fixes: de776d0d ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: -
Marek Behún authored
Add fix for erratum 5.2 of the 88E6393X (Amethyst) family: for 10gbase-r mode, some undocumented registers need to be written some special values. Fixes: de776d0d ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by:
-
Marek Behún authored
Save power on 88E6393X by disabling SerDes receiver and transmitter after SerDes is SerDes is disabled. Signed-off-by:
-
Marek Behún authored
The check for lane is unnecessary, since the function is called only with allowed lane argument. Signed-off-by:
-
Marek Behún authored
According to SERDES scripts for 88E6393X, erratum 4.8 has to be applied every time before SerDes is powered on. Split the code for erratum 4.8 into separate function and call it in mv88e6393x_serdes_power(). Fixes: de776d0d ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by:
-
Ben Ben-Ishay authored
mlx5e_build_shampo_hd_umr uses counters i and index incorrectly as unsigned, thus the err state err_unmap could stuck in endless loop. Change i to int to solve the first issue. Reduce index check to solve the second issue, the caller function validates that index could not rotate. Fixes: 64509b05 ("net/mlx5e: Add data path for SHAMPO feature") Signed-off-by:
Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Aya Levin authored
Validate MRTC register is supported before triggering a delayed work which accesses it. Fixes: 5a1023de ("net/mlx5: Add periodic update of host time to firmware") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Gal Pressman <gal@nvidia.com> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
-
Gal Pressman authored
The log timestamp work should not be queued before the command interface is initialized, move it to a later stage in the init flow. Fixes: 5a1023de ("net/mlx5: Add periodic update of host time to firmware") Signed-off-by:
-
Amir Tzin authored
The device health recovery flow calls mlx5_health_wait_pci_up() which queries the device for FW_RESET timeout after freeing the device timeouts structure on mlx5_function_teardown(). Fix this bug by moving timeouts structure init/cleanup to the device's init/uninit phases. Since it is necessary to reset default software timeouts on function reload, extract setting of defaults values from mlx5_tout_init() and call mlx5_tout_set_def_val() directly from mlx5_function_setup(). Fixes: 5945e1ad ("net/mlx5: Read timeout values from init segment") Reported by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by:
Amir Tzin <amirtz@nvidia.com> Signed-off-by:
-
Maor Dickman authored
When adding rule with multiple destinations, indirect table is used for all of the destinations if at least one of the destinations support it, this can cause creation of invalid indirect tables for the destinations that doesn't support it. Fixed it by using indirect table only if all destinations support it. Fixes: a508728a ("net/mlx5e: VF tunnel RX traffic offloading") Signed-off-by:
Maor Dickman <maord@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
-
Dmytro Linkin authored
If log_esw_max_sched_depth is not supported group pointer of the vport is NULL. Hence, check the pointer before reading bw_share value. Fixes: 0fe132ea ("net/mlx5: E-switch, Allow to add vports to rate groups") Signed-off-by:
Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by:
-
Mark Bloch authored
Always use MLX5_FLOW_TABLE_OTHER_VPORT flag when creating egress ACL table for single FDB. Not doing so on BlueField will make firmware fail the command. On BlueField the E-Switch manager is the ECPF (vport 0xFFFE) which is filled in the flow table creation command but as the other_vport field wasn't set the firmware complains about a bad parameter. This is different from a regular HCA where the E-Switch manager vport is the PF (vport 0x0). Passing MLX5_FLOW_TABLE_OTHER_VPORT will make the firmware happy both on BlueField and on regular HCAs without special condition for each. This fixes the bellow firmware syndrome: mlx5_cmd_check:819:(pid 571): CREATE_FLOW_TABLE(0x930) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x754a4) Fixes: db202995 ("net/mlx5: E-Switch, add logic to enable shared FDB") Signed-off-by:
Mark Bloch <mbloch@nvidia.com> Reviewed-by:
Maor Gottlieb <maorg@nvidia.com> Signed-off-by:
-
Dmytro Linkin authored
To enable transmit schduler on vport FW require non-zero configuration for vport's TSAR. If vport added to the group which has configured BW share value and TX rate values of the vport are zero, then scheduler wouldn't be enabled on this vport. Fix that by calling BW normalization if BW share of the new group is configured. Fixes: 0fe132ea ("net/mlx5: E-switch, Allow to add vports to rate groups") Signed-off-by:
Parav Pandit <parav@nvidia.com> Reviewed-by:
-
Maor Gottlieb authored
Driver needs to nullify the port select attributes of the LAG when port selection is destroyed, otherwise it breaks recreation of the LAG. It fixes the below kernel oops: [ 587.906377] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 587.908843] #PF: supervisor read access in kernel mode [ 587.910730] #PF: error_code(0x0000) - not-present page [ 587.912580] PGD 0 P4D 0 [ 587.913632] Oops: 0000 [#1] SMP PTI [ 587.914644] CPU: 5 PID: 165 Comm: kworker/u20:5 Tainted: G OE 5.9.0_mlnx #1 [ 587.916152] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 587.918332] Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] [ 587.919479] RIP: 0010:mlx5_del_flow_rules+0x10/0x270 [mlx5_core] [ 587.920568] mlx5_core 0000:08:00.1 enp8s0f1: Link up [ 587.920680] Code: c0 09 80 a0 e8 cf 42 a4 e0 48 c7 c3 f4 ff ff ff e8 8a 88 dd e0 e9 ab fe ff ff 0f 1f 44 00 00 41 56 41 55 49 89 fd 41 54 55 53 <48> 8b 47 08 48 8b 68 28 48 85 ed 74 2e 48 8d 7d 38 e8 6a 64 34 e1 [ 587.925116] bond0: (slave enp8s0f1): Enslaving as an active interface with an up link [ 587.930415] RSP: 0018:ffffc9000048fd88 EFLAGS: 00010282 [ 587.930417] RAX: ffff88846c14fac0 RBX: ffff88846cddcb80 RCX: 0000000080400007 [ 587.930417] RDX: 0000000080400008 RSI: ffff88846cddcb80 RDI: 0000000000000000 [ 587.930419] RBP: ffff88845fd80140 R08: 0000000000000001 R09: ffffffffa074ba00 [ 587.938132] R10: ffff88846c14fec0 R11: 0000000000000001 R12: ffff88846c122f10 [ 587.939473] R13: 0000000000000000 R14: 0000000000000001 R15: ffff88846d7a0000 [ 587.940800] FS: 0000000000000000(0000) GS:ffff88846fa80000(0000) knlGS:0000000000000000 [ 587.942416] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 587.943536] CR2: 0000000000000008 CR3: 000000000240a002 CR4: 0000000000770ee0 [ 587.944904] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 587.946308] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 587.947639] PKRU: 55555554 [ 587.948236] Call Trace: [ 587.948834] mlx5_lag_destroy_definer.isra.3+0x16/0x90 [mlx5_core] [ 587.950033] mlx5_lag_destroy_definers+0x5b/0x80 [mlx5_core] [ 587.951128] mlx5_deactivate_lag+0x6e/0x80 [mlx5_core] [ 587.952146] mlx5_do_bond+0x150/0x450 [mlx5_core] [ 587.953086] mlx5_do_bond_work+0x3e/0x50 [mlx5_core] [ 587.954086] process_one_work+0x1eb/0x3e0 [ 587.954899] worker_thread+0x2d/0x3c0 [ 587.955656] ? process_one_work+0x3e0/0x3e0 [ 587.956493] kthread+0x115/0x130 [ 587.957174] ? kthread_park+0x90/0x90 [ 587.957929] ret_from_fork+0x1f/0x30 [ 587.973055] ---[ end trace 71ccd6eca89f5513 ]--- Fixes: b7267869 ("net/mlx5: Lag, add support to create/destroy/modify port selection") Signed-off-by:
-
Moshe Shemesh authored
When the device is in internal error state, command interface isn't accessible and the driver decides which commands to fail and which to ignore. Move the MODIFY_RQT command to the ignore list in order to avoid the following redundant warning messages in internal error state: mlx5_core 0000:82:00.1: mlx5e_rss_disable:419:(pid 23754): Failed to redirect RQT 0x0 to drop RQ 0xc00848: err = -5 mlx5_core 0000:82:00.1: mlx5e_rx_res_channels_deactivate:598:(pid 23754): Failed to redirect direct RQT 0x1 to drop RQ 0xc00848 (channel 0): err = -5 mlx5_core 0000:82:00.1: mlx5e_rx_res_channels_deactivate:607:(pid 23754): Failed to redirect XSK RQT 0x19 to drop RQ 0xc00848 (channel 0): err = -5 Fixes: 43ec0f41 ("net/mlx5e: Hide all implementation details of mlx5e_rx_res") Signed-off-by:
-
Tariq Toukan authored
Transport Interface Receive (TIR) objects perform the packet processing and reassembly and is also responsible for demultiplexing the packets into the different RQs. There are certain TIR context attributes that propagate to the pointed RQs and applied to them (like packet_merge offloads (LRO/SHAMPO) and tunneled_offload_en). When TIRs do not agree on attributes values, a "last one wins" policy is applied. Hence, if not synced properly, a race between TIR params update and a concurrent TIR create/modify operation might yield to a mismatch between the shadow parameters in SW and the actual applied state of the RQs in HW. tunneled_offload_en is a fixed attribute per profile, while packet merge offload state might be toggled and get out-of-sync. When this happens, packet_merge offload might be working although not requested, or the opposite. All updates to packet_merge state and all create/modify operations of regular redirection/steering TIRs are done under the same priv->state_lock, so they do not run in parallel, and no race is possible. However, there are other kind of TIRs (acceleration offloads TIRs, like TLS TIRs) which are created on demand for each new connection without holding the coarse priv->state_lock, hence might race. Fix this by synchronizing all packet_merge state reads and writes against all TIR create/modify operations. Include the modify operations of the regular redirection steering TIRs under the new lock, for better code layering and division of responsibilities. Fixes: 1182f365 ("net/mlx5e: kTLS, Add kTLS RX HW offload support") Signed-off-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by:
-
Raed Salem authored
The cited patch added the IPsec support to uplink representor, however as uplink representors have his private statistics where IPsec stats is not part of it, that effectively makes IPsec stats hidden when uplink representor stats queried. Resolve by adding IPsec stats to uplink representor private statistics. Fixes: 5589b8f1 ("net/mlx5e: Add IPsec support to uplink representor") Signed-off-by:
Raed Salem <raeds@nvidia.com> Reviewed-by:
Alaa Hleihel <alaa@nvidia.com> Signed-off-by:
-
Raed Salem authored
Current code wrongly uses the skb->protocol field which reflects the outer l3 protocol to set the inner l3 type in Software Parser (SWP) fields settings in the ethernet segment (eseg) in flows where inner l3 exists like in Vxlan over ESP flow, the above method wrongly use the outer protocol type instead of the inner one. thus breaking cases where inner and outer headers have different protocols. Fix by setting the inner l3 type in SWP according to the inner l3 ip header version. Fixes: 2ac9cfe7 ("net/mlx5e: IPSec, Add Innova IPSec offload TX data path") Signed-off-by:
-
Randy Dunlap authored
Fix section mismatch warnings in xtsonic. The first one appears to be bogus and after fixing the second one, the first one is gone. WARNING: modpost: vmlinux.o(.text+0x529adc): Section mismatch in reference from the function sonic_get_stats() to the function .init.text:set_reset_devices() The function sonic_get_stats() references the function __init set_reset_devices(). This is often because sonic_get_stats lacks a __init annotation or the annotation of set_reset_devices is wrong. WARNING: modpost: vmlinux.o(.text+0x529b3b): Section mismatch in reference from the function xtsonic_probe() to the function .init.text:sonic_probe1() The function xtsonic_probe() references the function __init sonic_probe1(). This is often because xtsonic_probe lacks a __init annotation or the annotation of sonic_probe1 is wrong. Fixes: 74f2a5f0 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Chris Zankel <chris@zankel.net> Cc: linux-xtensa@linux-xtensa.org Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by:
Max Filippov <jcmvbkbc@gmail.com> Link: https://lore.kernel.org/r/20211130063947.7529-1-rdunlap@infradead.orgSigned-off-by:
-
