Skip to content

L
linux
Switch branch/tag
  1. 02 Jun, 2016 24 commits
  3. 01 Jun, 2016 1 commit
  5. 30 May, 2016 3 commits
  7. 29 May, 2016 3 commits
  9. 28 May, 2016 9 commits
    • Mikulas Patocka's avatar
      hpfs: implement the show_options method · 037369b8
      Mikulas Patocka authored 
      The HPFS filesystem used generic_show_options to produce string that is
displayed in /proc/mounts.  However, there is a problem that the options
may disappear after remount.  If we mount the filesystem with option1
and then remount it with option2, /proc/mounts should show both option1
and option2, however it only shows option2 because the whole option
string is replaced with replace_mount_options in hpfs_remount_fs.

To fix this bug, implement the hpfs_show_options function that prints
options that are currently selected.
Signed-off-by: default avatarMikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      037369b8
    • Mikulas Patocka's avatar
      affs: fix remount failure when there are no options changed · 01d6e087
      Mikulas Patocka authored 
      Commit c8f33d0b ("affs: kstrdup() memory handling") checks if the
kstrdup function returns NULL due to out-of-memory condition.

However, if we are remounting a filesystem with no change to
filesystem-specific options, the parameter data is NULL.  In this case,
kstrdup returns NULL (because it was passed NULL parameter), although no
out of memory condition exists.  The mount syscall then fails with
ENOMEM.

This patch fixes the bug.  We fail with ENOMEM only if data is non-NULL.

The patch also changes the call to replace_mount_options - if we didn't
pass any filesystem-specific options, we don't call
replace_mount_options (thus we don't erase existing reported options).

Fixes: c8f33d0b ("affs: kstrdup() memory handling")
Signed-off-by: default avatarMikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org	# v4.1+
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      01d6e087
    • Mikulas Patocka's avatar
      hpfs: fix remount failure when there are no options changed · 44d51706
      Mikulas Patocka authored 
      Commit ce657611 ("hpfs: kstrdup() out of memory handling") checks if
the kstrdup function returns NULL due to out-of-memory condition.

However, if we are remounting a filesystem with no change to
filesystem-specific options, the parameter data is NULL.  In this case,
kstrdup returns NULL (because it was passed NULL parameter), although no
out of memory condition exists.  The mount syscall then fails with
ENOMEM.

This patch fixes the bug.  We fail with ENOMEM only if data is non-NULL.

The patch also changes the call to replace_mount_options - if we didn't
pass any filesystem-specific options, we don't call
replace_mount_options (thus we don't erase existing reported options).

Fixes: ce657611 ("hpfs: kstrdup() out of memory handling")
Signed-off-by: default avatarMikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      44d51706
    • Linus Torvalds's avatar
      Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus · 4029632c
      Linus Torvalds authored 
      Pull more MIPS updates from Ralf Baechle:
 "This is the secondnd batch of MIPS patches for 4.7. Summary:

  CPS:
   - Copy EVA configuration when starting secondary VPs.

  EIC:
   - Clear Status IPL.

  Lasat:
   - Fix a few off by one bugs.

  lib:
   - Mark intrinsics notrace.  Not only are the intrinsics
     uninteresting, it would cause infinite recursion.

  MAINTAINERS:
   - Add file patterns for MIPS BRCM device tree bindings.
   - Add file patterns for mips device tree bindings.

  MT7628:
   - Fix MT7628 pinmux typos.
   - wled_an pinmux gpio.
   - EPHY LEDs pinmux support.

  Pistachio:
   - Enable KASLR

  VDSO:
   - Build microMIPS VDSO for microMIPS kernels.
   - Fix aliasing warning by building with `-fno-strict-aliasing' for
     debugging but also tracing them might result in recursion.

  Misc:
   - Add missing FROZEN hotplug notifier transitions.
   - Fix clk binding example for varioius PIC32 devices.
   - Fix cpu interrupt controller node-names in the DT files.
   - Fix XPA CPU feature separation.
   - Fix write_gc0_* macros when writing zero.
   - Add inline asm encoding helpers.
   - Add missing VZ accessor microMIPS encodings.
   - Fix little endian microMIPS MSA encodings.
   - Add 64-bit HTW fields and fix its configuration.
   - Fix sigreturn via VDSO on microMIPS kernel.
   - Lots of typo fixes.
   - Add definitions of SegCtl registers and use them"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits)
  MIPS: Add missing FROZEN hotplug notifier transitions
  MIPS: Build microMIPS VDSO for microMIPS kernels
  MIPS: Fix sigreturn via VDSO on microMIPS kernel
  MIPS: devicetree: fix cpu interrupt controller node-names
  MIPS: VDSO: Build with `-fno-strict-aliasing'
  MIPS: Pistachio: Enable KASLR
  MIPS: lib: Mark intrinsics notrace
  MIPS: Fix 64-bit HTW configuration
  MIPS: Add 64-bit HTW fields
  MAINTAINERS: Add file patterns for mips device tree bindings
  MAINTAINERS: Add file patterns for mips brcm device tree bindings
  MIPS: Simplify DSP instruction encoding macros
  MIPS: Add missing tlbinvf/XPA microMIPS encodings
  MIPS: Fix little endian microMIPS MSA encodings
  MIPS: Add missing VZ accessor microMIPS encodings
  MIPS: Add inline asm encoding helpers
  MIPS: Spelling fix lets -> let's
  MIPS: VR41xx: Fix typo
  MIPS: oprofile: Fix typo
  MIPS: math-emu: Fix typo
  ...
      4029632c
    • Guenter Roeck's avatar
      fs: fix binfmt_aout.c build error · d66492bc
      Guenter Roeck authored 
      Various builds (such as i386:allmodconfig) fail with

  fs/binfmt_aout.c:133:2: error: expected identifier or '(' before 'return'
  fs/binfmt_aout.c:134:1: error: expected identifier or '(' before '}' token

[ Oops. My bad, I had stupidly thought that "allmodconfig" covered this
  on x86-64 too, but it obviously doesn't.  Egg on my face.  - Linus ]

Fixes: 5d22fc25 ("mm: remove more IS_ERR_VALUE abuses")
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d66492bc
    • Linus Torvalds's avatar
      Merge branch 'hash' of git://ftp.sciencehorizons.net/linux · 7e0fb73c
      Linus Torvalds authored 
      Pull string hash improvements from George Spelvin:
 "This series does several related things:

   - Makes the dcache hash (fs/namei.c) useful for general kernel use.

     (Thanks to Bruce for noticing the zero-length corner case)

   - Converts the string hashes in <linux/sunrpc/svcauth.h> to use the
     above.

   - Avoids 64-bit multiplies in hash_64() on 32-bit platforms.  Two
     32-bit multiplies will do well enough.

   - Rids the world of the bad hash multipliers in hash_32.

     This finishes the job started in commit 689de1d6 ("Minimal
     fix-up of bad hashing behavior of hash_64()")

     The vast majority of Linux architectures have hardware support for
     32x32-bit multiply and so derive no benefit from "simplified"
     multipliers.

     The few processors that do not (68000, h8/300 and some models of
     Microblaze) have arch-specific implementations added.  Those
     patches are last in the series.

   - Overhauls the dcache hash mixing.

     The patch in commit 0fed3ac8 ("namei: Improve hash mixing if
     CONFIG_DCACHE_WORD_ACCESS") was an off-the-cuff suggestion.
     Replaced with a much more careful design that's simultaneously
     faster and better.  (My own invention, as there was noting suitable
     in the literature I could find.  Comments welcome!)

   - Modify the hash_name() loop to skip the initial HASH_MIX().  This
     would let us salt the hash if we ever wanted to.

   - Sort out partial_name_hash().

     The hash function is declared as using a long state, even though
     it's truncated to 32 bits at the end and the extra internal state
     contributes nothing to the result.  And some callers do odd things:

      - fs/hfs/string.c only allocates 32 bits of state
      - fs/hfsplus/unicode.c uses it to hash 16-bit unicode symbols not bytes

   - Modify bytemask_from_count to handle inputs of 1..sizeof(long)
     rather than 0..sizeof(long)-1.  This would simplify users other
     than full_name_hash"

  Special thanks to Bruce Fields for testing and finding bugs in v1.  (I
  learned some humbling lessons about "obviously correct" code.)

  On the arch-specific front, the m68k assembly has been tested in a
  standalone test harness, I've been in contact with the Microblaze
  maintainers who mostly don't care, as the hardware multiplier is never
  omitted in real-world applications, and I haven't heard anything from
  the H8/300 world"

* 'hash' of git://ftp.sciencehorizons.net/linux:
  h8300: Add <asm/hash.h>
  microblaze: Add <asm/hash.h>
  m68k: Add <asm/hash.h>
  <linux/hash.h>: Add support for architecture-specific functions
  fs/namei.c: Improve dcache hash function
  Eliminate bad hash multipliers from hash_32() and  hash_64()
  Change hash_64() return value to 32 bits
  <linux/sunrpc/svcauth.h>: Define hash_str() in terms of hashlen_string()
  fs/namei.c: Add hashlen_string() function
  Pull out string hash to <linux/stringhash.h>
      7e0fb73c
    • George Spelvin's avatar
      h8300: Add <asm/hash.h> · 4684fe95
      George Spelvin authored 
      This will improve the performance of hash_32() and hash_64(), but due
to complete lack of multi-bit shift instructions on H8, performance will
still be bad in surrounding code.

Designing H8-specific hash algorithms to work around that is a separate
project.  (But if the maintainers would like to get in touch...)
Signed-off-by: default avatarGeorge Spelvin <linux@sciencehorizons.net>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: uclinux-h8-devel@lists.sourceforge.jp
      4684fe95
    • George Spelvin's avatar
      microblaze: Add <asm/hash.h> · 7b13277b
      George Spelvin authored 
      Microblaze is an FPGA soft core that can be configured various ways.

If it is configured without a multiplier, the standard __hash_32()
will require a call to __mulsi3, which is a slow software loop.

Instead, use a shift-and-add sequence for the constant multiply.
GCC knows how to do this, but it's not as clever as some.
Signed-off-by: default avatarGeorge Spelvin <linux@sciencehorizons.net>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
      7b13277b
    • George Spelvin's avatar
      m68k: Add <asm/hash.h> · 14c44b95
      George Spelvin authored 
      This provides a multiply by constant GOLDEN_RATIO_32 = 0x61C88647
for the original mc68000, which lacks a 32x32-bit multiply instruction.

Yes, the amount of optimization effort put in is excessive. :-)

Shift-add chain found by Yevgen Voronenko's Hcub algorithm at
http://spiral.ece.cmu.edu/mcm/gen.htmlSigned-off-by: default avatarGeorge Spelvin <linux@sciencehorizons.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Philippe De Muyter <phdm@macq.eu>
Cc: linux-m68k@lists.linux-m68k.org
      14c44b95
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7