- 20 May, 2017 1 commit
-
-
Juergen Gross authored
commit 69861e0a upstream. When booted as pv-guest the p2m list presented by the Xen is already mapped to virtual addresses. In dom0 case the hypervisor might make use of 2M- or 1G-pages for this mapping. Unfortunately while being properly aligned in virtual and machine address space, those pages might not be aligned properly in guest physical address space. So when trying to obtain the guest physical address of such a page pud_pfn() and pmd_pfn() must be avoided as those will mask away guest physical address bits not being zero in this special case. Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 14 May, 2017 29 commits
-
-
Greg Kroah-Hartman authored
-
Ilya Dryomov authored
commit 19b7ccf8 upstream. Commit 25520d55 ("block: Inline blk_integrity in struct gendisk") introduced blk_integrity_revalidate(), which seems to assume ownership of the stable pages flag and unilaterally clears it if no blk_integrity profile is registered: if (bi->profile) disk->queue->backing_dev_info->capabilities |= BDI_CAP_STABLE_WRITES; else disk->queue->backing_dev_info->capabilities &= ~BDI_CAP_STABLE_WRITES; It's called from revalidate_disk() and rescan_partitions(), making it impossible to enable stable pages for drivers that support partitions and don't use blk_integrity: while the call in revalidate_disk() can be trivially worked around (see zram, which doesn't support partitions and hence gets away with zram_revalidate_disk()), rescan_partitions() can be triggered from userspace at any time. This breaks rbd, where the ceph messenger is responsible for generating/verifying CRCs. Since blk_integrity_{un,}register() "must" be used for (un)registering the integrity profile with the block layer, move BDI_CAP_STABLE_WRITES setting there. This way drivers that call blk_integrity_register() and use integrity infrastructure won't interfere with drivers that don't but still want stable pages. Fixes: 25520d55 ("block: Inline blk_integrity in struct gendisk") Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Snitzer <snitzer@redhat.com> Tested-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Boris Ostrovsky authored
commit 84d582d2 upstream. Recent discussion (http://marc.info/?l=xen-devel&m=149192184523741) established that commit 72a9b186 ("xen: Remove event channel notification through Xen PCI platform device") (and thus commit da72ff5b ("partially revert "xen: Remove event channel notification through Xen PCI platform device"")) are unnecessary and, in fact, prevent HVM guests from booting on Xen releases prior to 4.0 Therefore we revert both of those commits. The summary of that discussion is below: Here is the brief summary of the current situation: Before the offending commit (72a9b186): 1) INTx does not work because of the reset_watches path. 2) The reset_watches path is only taken if you have Xen > 4.0 3) The Linux Kernel by default will use vector inject if the hypervisor support. So even INTx does not work no body running the kernel with Xen > 4.0 would notice. Unless he explicitly disabled this feature either in the kernel or in Xen (and this can only be disabled by modifying the code, not user-supported way to do it). After the offending commit (+ partial revert): 1) INTx is no longer support for HVM (only for PV guests). 2) Any HVM guest The kernel will not boot on Xen < 4.0 which does not have vector injection support. Since the only other mode supported is INTx which. So based on this summary, I think before commit (72a9b186) we were in much better position from a user point of view. Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by:
-
Stefano Stabellini authored
commit e0586326 upstream. The following commit: commit 815dd187 Author: Bart Van Assche <bart.vanassche@sandisk.com> Date: Fri Jan 20 13:04:04 2017 -0800 treewide: Consolidate get_dma_ops() implementations rearranges get_dma_ops in a way that xen_dma_ops are not returned when running on Xen anymore, dev->dma_ops is returned instead (see arch/arm/include/asm/dma-mapping.h:get_arch_dma_ops and include/linux/dma-mapping.h:get_dma_ops). Fix the problem by storing dev->dma_ops in dev_archdata, and setting dev->dma_ops to xen_dma_ops. This way, xen_dma_ops is returned naturally by get_dma_ops. The Xen code can retrieve the original dev->dma_ops from dev_archdata when needed. It also allows us to remove __generic_dma_ops from common headers. Signed-off-by:
Stefano Stabellini <sstabellini@kernel.org> Tested-by:
Julien Grall <julien.grall@arm.com> Suggested-by:
Catalin Marinas <catalin.marinas@arm.com> Reviewed-by:
-
Jin Qian authored
commit b9dd4618 upstream. F2FS uses 4 bytes to represent block address. As a result, supported size of disk is 16 TB and it equals to 16 * 1024 * 1024 / 2 segments. Signed-off-by:
Jin Qian <jinqian@google.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Jon Mason authored
[ Upstream commit 922c60e8 ] If an error is encountered in mdio_mux_init(), the error path will call mdiobus_free(). Since mdiobus_register() has been called prior to mdio_mux_init(), the bus->state will not be MDIOBUS_UNREGISTERED. This causes a BUG_ON() in mdiobus_free(). To correct this issue, add an error path for mdio_mux_init() which calls mdiobus_unregister() prior to mdiobus_free(). Signed-off-by:
Jon Mason <jon.mason@broadcom.com> Fixes: 98bc865a ("net: mdio-mux: Add MDIO mux driver for iProc SoCs") Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 0d0e5769 ] The patch fixes two things at once: 1) It checks the env->allow_ptr_leaks and only prints the map address to the log if we have the privileges to do so, otherwise it just dumps 0 as we would when kptr_restrict is enabled on %pK. Given the latter is off by default and not every distro sets it, I don't want to rely on this, hence the 0 by default for unprivileged. 2) Printing of ldimm64 in the verifier log is currently broken in that we don't print the full immediate, but only the 32 bit part of the first insn part for ldimm64. Thus, fix this up as well; it's okay to access, since we verified all ldimm64 earlier already (including just constants) through replace_map_fd_with_map_ptr(). Fixes: 1be7f75d ("bpf: enable non-root eBPF programs") Fixes: cbd35700 ("bpf: verifier (add ability to receive verification log)") Reported-by:
Jann Horn <jannh@google.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit ac45bd93 ] We have the number of longs, but we need to calculate the number of bytes required. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 84b114b9 ] Whole point of randomization was to hide server uptime, but an attacker can simply start a syn flood and TCP generates 'old style' timestamps, directly revealing server jiffies value. Also, TSval sent by the server to a particular remote address vary depending on syncookies being sent or not, potentially triggering PAWS drops for innocent clients. Lets implement proper randomization, including for SYNcookies. Also we do not need to export sysctl_tcp_timestamps, since it is not used from a module. In v2, I added Florian feedback and contribution, adding tsoff to tcp_get_cookie_sock(). v3 removed one unused variable in tcp_v4_connect() as Florian spotted. Fixes: 95a22cae ("tcp: randomize tcp timestamp offsets for each connection") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Florian Westphal <fw@strlen.de> Tested-by:
-
WANG Cong authored
[ Upstream commit 242d3a49 ] For each netns (except init_net), we initialize its null entry in 3 places: 1) The template itself, as we use kmemdup() 2) Code around dst_init_metrics() in ip6_route_net_init() 3) ip6_route_dev_notify(), which is supposed to initialize it after loopback registers Unfortunately the last one still happens in a wrong order because we expect to initialize net->ipv6.ip6_null_entry->rt6i_idev to net->loopback_dev's idev, thus we have to do that after we add idev to loopback. However, this notifier has priority == 0 same as ipv6_dev_notf, and ipv6_dev_notf is registered after ip6_route_dev_notifier so it is called actually after ip6_route_dev_notifier. This is similar to commit 2f460933 ("ipv6: initialize route null entry in addrconf_init()") which fixes init_net. Fix it by picking a smaller priority for ip6_route_dev_notifier. Also, we have to release the refcnt accordingly when unregistering loopback_dev because device exit functions are called before subsys exit functions. Acked-by:
David Ahern <dsahern@gmail.com> Tested-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 2f460933 ] Andrey reported a crash on init_net.ipv6.ip6_null_entry->rt6i_idev since it is always NULL. This is clearly wrong, we have code to initialize it to loopback_dev, unfortunately the order is still not correct. loopback_dev is registered very early during boot, we lose a chance to re-initialize it in notifier. addrconf_init() is called after ip6_route_init(), which means we have no chance to correct it. Fix it by moving this initialization explicitly after ipv6_add_dev(init_net.loopback_dev) in addrconf_init(). Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Michal Schmidt authored
[ Upstream commit 77ef033b ] IFLA_PHYS_PORT_NAME is a string attribute, so terminate it with \0. Otherwise libnl3 fails to validate netlink messages with this attribute. "ip -detail a" assumes too that the attribute is NUL-terminated when printing it. It often was, due to padding. I noticed this as libvirtd failing to start on a system with sfc driver after upgrading it to Linux 4.11, i.e. when sfc added support for phys_port_name. Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Signed-off-by:
-
Alexander Potapenko authored
[ Upstream commit 86f4c90a ] raw_send_hdrinc() and rawv6_send_hdrinc() expect that the buffer copied from the userspace contains the IPv4/IPv6 header, so if too few bytes are copied, parts of the header may remain uninitialized. This bug has been detected with KMSAN. For the record, the KMSAN report: ================================================================== BUG: KMSAN: use of unitialized memory in nf_ct_frag6_gather+0xf5a/0x44a0 inter: 0 CPU: 0 PID: 1036 Comm: probe Not tainted 4.11.0-rc5+ #2455 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x143/0x1b0 lib/dump_stack.c:52 kmsan_report+0x16b/0x1e0 mm/kmsan/kmsan.c:1078 __kmsan_warning_32+0x5c/0xa0 mm/kmsan/kmsan_instr.c:510 nf_ct_frag6_gather+0xf5a/0x44a0 net/ipv6/netfilter/nf_conntrack_reasm.c:577 ipv6_defrag+0x1d9/0x280 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68 nf_hook_entry_hookfn ./include/linux/netfilter.h:102 nf_hook_slow+0x13f/0x3c0 net/netfilter/core.c:310 nf_hook ./include/linux/netfilter.h:212 NF_HOOK ./include/linux/netfilter.h:255 rawv6_send_hdrinc net/ipv6/raw.c:673 rawv6_sendmsg+0x2fcb/0x41a0 net/ipv6/raw.c:919 inet_sendmsg+0x3f8/0x6d0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 sock_sendmsg net/socket.c:643 SYSC_sendto+0x6a5/0x7c0 net/socket.c:1696 SyS_sendto+0xbc/0xe0 net/socket.c:1664 do_syscall_64+0x72/0xa0 arch/x86/entry/common.c:285 entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:246 RIP: 0033:0x436e03 RSP: 002b:00007ffce48baf38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00000000004002b0 RCX: 0000000000436e03 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007ffce48baf90 R08: 00007ffce48baf50 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000401790 R14: 0000000000401820 R15: 0000000000000000 origin: 00000000d9400053 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:362 kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:257 kmsan_poison_shadow+0x6d/0xc0 mm/kmsan/kmsan.c:270 slab_alloc_node mm/slub.c:2735 __kmalloc_node_track_caller+0x1f4/0x390 mm/slub.c:4341 __kmalloc_reserve net/core/skbuff.c:138 __alloc_skb+0x2cd/0x740 net/core/skbuff.c:231 alloc_skb ./include/linux/skbuff.h:933 alloc_skb_with_frags+0x209/0xbc0 net/core/skbuff.c:4678 sock_alloc_send_pskb+0x9ff/0xe00 net/core/sock.c:1903 sock_alloc_send_skb+0xe4/0x100 net/core/sock.c:1920 rawv6_send_hdrinc net/ipv6/raw.c:638 rawv6_sendmsg+0x2918/0x41a0 net/ipv6/raw.c:919 inet_sendmsg+0x3f8/0x6d0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 sock_sendmsg net/socket.c:643 SYSC_sendto+0x6a5/0x7c0 net/socket.c:1696 SyS_sendto+0xbc/0xe0 net/socket.c:1664 do_syscall_64+0x72/0xa0 arch/x86/entry/common.c:285 return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:246 ================================================================== , triggered by the following syscalls: socket(PF_INET6, SOCK_RAW, IPPROTO_RAW) = 3 sendto(3, NULL, 0, 0, {sa_family=AF_INET6, sin6_port=htons(0), inet_pton(AF_INET6, "ff00::", &sin6_addr), sin6_flowinfo=0, sin6_scope_id=0}, 28) = -1 EPERM A similar report is triggered in net/ipv4/raw.c if we use a PF_INET socket instead of a PF_INET6 one. Signed-off-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 8b485ce6 ] Under fuzzer stress, it is possible that a child gets a non NULL fastopen_req pointer from its parent at accept() time, when/if parent morphs from listener to active session. We need to make sure this can not happen, by clearing the field after socket cloning. BUG: Double free or freeing an invalid pointer Unexpected shadow byte: 0xFB CPU: 3 PID: 20933 Comm: syz-executor3 Not tainted 4.11.0+ #306 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x292/0x395 lib/dump_stack.c:52 kasan_object_err+0x1c/0x70 mm/kasan/report.c:164 kasan_report_double_free+0x5c/0x70 mm/kasan/report.c:185 kasan_slab_free+0x9d/0xc0 mm/kasan/kasan.c:580 slab_free_hook mm/slub.c:1357 [inline] slab_free_freelist_hook mm/slub.c:1379 [inline] slab_free mm/slub.c:2961 [inline] kfree+0xe8/0x2b0 mm/slub.c:3882 tcp_free_fastopen_req net/ipv4/tcp.c:1077 [inline] tcp_disconnect+0xc15/0x13e0 net/ipv4/tcp.c:2328 inet_child_forget+0xb8/0x600 net/ipv4/inet_connection_sock.c:898 inet_csk_reqsk_queue_add+0x1e7/0x250 net/ipv4/inet_connection_sock.c:928 tcp_get_cookie_sock+0x21a/0x510 net/ipv4/syncookies.c:217 cookie_v4_check+0x1a19/0x28b0 net/ipv4/syncookies.c:384 tcp_v4_cookie_check net/ipv4/tcp_ipv4.c:1384 [inline] tcp_v4_do_rcv+0x731/0x940 net/ipv4/tcp_ipv4.c:1421 tcp_v4_rcv+0x2dc0/0x31c0 net/ipv4/tcp_ipv4.c:1715 ip_local_deliver_finish+0x4cc/0xc20 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:257 [inline] ip_local_deliver+0x1ce/0x700 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:492 [inline] ip_rcv_finish+0xb1d/0x20b0 net/ipv4/ip_input.c:396 NF_HOOK include/linux/netfilter.h:257 [inline] ip_rcv+0xd8c/0x19c0 net/ipv4/ip_input.c:487 __netif_receive_skb_core+0x1ad1/0x3400 net/core/dev.c:4210 __netif_receive_skb+0x2a/0x1a0 net/core/dev.c:4248 process_backlog+0xe5/0x6c0 net/core/dev.c:4868 napi_poll net/core/dev.c:5270 [inline] net_rx_action+0xe70/0x18e0 net/core/dev.c:5335 __do_softirq+0x2fb/0xb99 kernel/softirq.c:284 do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:899 </IRQ> do_softirq.part.17+0x1e8/0x230 kernel/softirq.c:328 do_softirq kernel/softirq.c:176 [inline] __local_bh_enable_ip+0x1cf/0x1e0 kernel/softirq.c:181 local_bh_enable include/linux/bottom_half.h:31 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:931 [inline] ip_finish_output2+0x9ab/0x15e0 net/ipv4/ip_output.c:230 ip_finish_output+0xa35/0xdf0 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:246 [inline] ip_output+0x1f6/0x7b0 net/ipv4/ip_output.c:404 dst_output include/net/dst.h:486 [inline] ip_local_out+0x95/0x160 net/ipv4/ip_output.c:124 ip_queue_xmit+0x9a8/0x1a10 net/ipv4/ip_output.c:503 tcp_transmit_skb+0x1ade/0x3470 net/ipv4/tcp_output.c:1057 tcp_write_xmit+0x79e/0x55b0 net/ipv4/tcp_output.c:2265 __tcp_push_pending_frames+0xfa/0x3a0 net/ipv4/tcp_output.c:2450 tcp_push+0x4ee/0x780 net/ipv4/tcp.c:683 tcp_sendmsg+0x128d/0x39b0 net/ipv4/tcp.c:1342 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x660/0x810 net/socket.c:1696 SyS_sendto+0x40/0x50 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x446059 RSP: 002b:00007faa6761fb58 EFLAGS: 00000282 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000017 RCX: 0000000000446059 RDX: 0000000000000001 RSI: 0000000020ba3fcd RDI: 0000000000000017 RBP: 00000000006e40a0 R08: 0000000020ba4ff0 R09: 0000000000000010 R10: 0000000020000000 R11: 0000000000000282 R12: 0000000000708150 R13: 0000000000000000 R14: 00007faa676209c0 R15: 00007faa67620700 Object at ffff88003b5bbcb8, in cache kmalloc-64 size: 64 Allocated: PID = 20909 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:513 set_track mm/kasan/kasan.c:525 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:616 kmem_cache_alloc_trace+0x82/0x270 mm/slub.c:2745 kmalloc include/linux/slab.h:490 [inline] kzalloc include/linux/slab.h:663 [inline] tcp_sendmsg_fastopen net/ipv4/tcp.c:1094 [inline] tcp_sendmsg+0x221a/0x39b0 net/ipv4/tcp.c:1139 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x660/0x810 net/socket.c:1696 SyS_sendto+0x40/0x50 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed: PID = 20909 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:513 set_track mm/kasan/kasan.c:525 [inline] kasan_slab_free+0x73/0xc0 mm/kasan/kasan.c:589 slab_free_hook mm/slub.c:1357 [inline] slab_free_freelist_hook mm/slub.c:1379 [inline] slab_free mm/slub.c:2961 [inline] kfree+0xe8/0x2b0 mm/slub.c:3882 tcp_free_fastopen_req net/ipv4/tcp.c:1077 [inline] tcp_disconnect+0xc15/0x13e0 net/ipv4/tcp.c:2328 __inet_stream_connect+0x20c/0xf90 net/ipv4/af_inet.c:593 tcp_sendmsg_fastopen net/ipv4/tcp.c:1111 [inline] tcp_sendmsg+0x23a8/0x39b0 net/ipv4/tcp.c:1139 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x660/0x810 net/socket.c:1696 SyS_sendto+0x40/0x50 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x1f/0xbe Fixes: e994b2f0 ("tcp: do not lock listener to process SYN packets") Fixes: 7db92362 ("tcp: fix potential double free issue for fastopen_req") Signed-off-by:
Wei Wang <weiwan@google.com> Signed-off-by:
-
Daniele Palmas authored
[ Upstream commit 4c54dc02 ] This patch adds support for Telit ME910 PID 0x1100. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
David Ahern authored
[ Upstream commit 6d717134 ] Andrey reported a warning triggered by the rcu code: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 5911 at lib/debugobjects.c:289 debug_print_object+0x175/0x210 ODEBUG: activate active (active state 1) object type: rcu_head hint: (null) Modules linked in: CPU: 1 PID: 5911 Comm: a.out Not tainted 4.11.0-rc8+ #271 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x192/0x22d lib/dump_stack.c:52 __warn+0x19f/0x1e0 kernel/panic.c:549 warn_slowpath_fmt+0xe0/0x120 kernel/panic.c:564 debug_print_object+0x175/0x210 lib/debugobjects.c:286 debug_object_activate+0x574/0x7e0 lib/debugobjects.c:442 debug_rcu_head_queue kernel/rcu/rcu.h:75 __call_rcu.constprop.76+0xff/0x9c0 kernel/rcu/tree.c:3229 call_rcu_sched+0x12/0x20 kernel/rcu/tree.c:3288 rt6_rcu_free net/ipv6/ip6_fib.c:158 rt6_release+0x1ea/0x290 net/ipv6/ip6_fib.c:188 fib6_del_route net/ipv6/ip6_fib.c:1461 fib6_del+0xa42/0xdc0 net/ipv6/ip6_fib.c:1500 __ip6_del_rt+0x100/0x160 net/ipv6/route.c:2174 ip6_del_rt+0x140/0x1b0 net/ipv6/route.c:2187 __ipv6_ifa_notify+0x269/0x780 net/ipv6/addrconf.c:5520 addrconf_ifdown+0xe60/0x1a20 net/ipv6/addrconf.c:3672 ... Andrey's reproducer program runs in a very tight loop, calling 'unshare -n' and then spawning 2 sets of 14 threads running random ioctl calls. The relevant networking sequence: 1. New network namespace created via unshare -n - ip6tnl0 device is created in down state 2. address added to ip6tnl0 - equivalent to ip -6 addr add dev ip6tnl0 fd00::bb/1 - DAD is started on the address and when it completes the host route is inserted into the FIB 3. ip6tnl0 is brought up - the new fixup_permanent_addr function restarts DAD on the address 4. exit namespace - teardown / cleanup sequence starts - once in a blue moon, lo teardown appears to happen BEFORE teardown of ip6tunl0 + down on 'lo' removes the host route from the FIB since the dst->dev for the route is loobback + host route added to rcu callback list * rcu callback has not run yet, so rt is NOT on the gc list so it has NOT been marked obsolete 5. in parallel to 4. worker_thread runs addrconf_dad_completed - DAD on the address on ip6tnl0 completes - calls ipv6_ifa_notify which inserts the host route All of that happens very quickly. The result is that a host route that has been deleted from the IPv6 FIB and added to the RCU list is re-inserted into the FIB. The exit namespace eventually gets to cleaning up ip6tnl0 which removes the host route from the FIB again, calls the rcu function for cleanup -- and triggers the double rcu trace. The root cause is duplicate DAD on the address -- steps 2 and 3. Arguably, DAD should not be started in step 2. The interface is in the down state, so it can not really send out requests for the address which makes starting DAD pointless. Since the second DAD was introduced by a recent change, seems appropriate to use it for the Fixes tag and have the fixup function only start DAD for addresses in the PREDAD state which occurs in addrconf_ifdown if the address is retained. Big thanks to Andrey for isolating a reliable reproducer for this problem. Fixes: f1705ec1 ("net: ipv6: Make address flushing on ifdown optional") Reported-by:
-
Eric Dumazet authored
[ Upstream commit a9f11f96 ] Be careful when comparing tcp_time_stamp to some u32 quantity, otherwise result can be surprising. Fixes: 7c106d7e ("[TCP]: TCP Low Priority congestion control") Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit ddc665a4 ] When the instruction right before the branch destination is a 64 bit load immediate, we currently calculate the wrong jump offset in the ctx->offset[] array as we only account one instruction slot for the 64 bit load immediate although it uses two BPF instructions. Fix it up by setting the offset into the right slot after we incremented the index. Before (ldimm64 test 1): [...] 00000020: 52800007 mov w7, #0x0 // #0 00000024: d2800060 mov x0, #0x3 // #3 00000028: d2800041 mov x1, #0x2 // #2 0000002c: eb01001f cmp x0, x1 00000030: 54ffff82 b.cs 0x00000020 00000034: d29fffe7 mov x7, #0xffff // #65535 00000038: f2bfffe7 movk x7, #0xffff, lsl #16 0000003c: f2dfffe7 movk x7, #0xffff, lsl #32 00000040: f2ffffe7 movk x7, #0xffff, lsl #48 00000044: d29dddc7 mov x7, #0xeeee // #61166 00000048: f2bdddc7 movk x7, #0xeeee, lsl #16 0000004c: f2ddddc7 movk x7, #0xeeee, lsl #32 00000050: f2fdddc7 movk x7, #0xeeee, lsl #48 [...] After (ldimm64 test 1): [...] 00000020: 52800007 mov w7, #0x0 // #0 00000024: d2800060 mov x0, #0x3 // #3 00000028: d2800041 mov x1, #0x2 // #2 0000002c: eb01001f cmp x0, x1 00000030: 540000a2 b.cs 0x00000044 00000034: d29fffe7 mov x7, #0xffff // #65535 00000038: f2bfffe7 movk x7, #0xffff, lsl #16 0000003c: f2dfffe7 movk x7, #0xffff, lsl #32 00000040: f2ffffe7 movk x7, #0xffff, lsl #48 00000044: d29dddc7 mov x7, #0xeeee // #61166 00000048: f2bdddc7 movk x7, #0xeeee, lsl #16 0000004c: f2ddddc7 movk x7, #0xeeee, lsl #32 00000050: f2fdddc7 movk x7, #0xeeee, lsl #48 [...] Also, add a couple of test cases to make sure JITs pass this test. Tested on Cavium ThunderX ARMv8. The added test cases all pass after the fix. Fixes: 8eee539d ("arm64: bpf: fix out-of-bounds read in bpf2a64_offset()") Reported-by:
-
Yonghong Song authored
[ Upstream commit 332270fd ] llvm 4.0 and above generates the code like below: .... 440: (b7) r1 = 15 441: (05) goto pc+73 515: (79) r6 = *(u64 *)(r10 -152) 516: (bf) r7 = r10 517: (07) r7 += -112 518: (bf) r2 = r7 519: (0f) r2 += r1 520: (71) r1 = *(u8 *)(r8 +0) 521: (73) *(u8 *)(r2 +45) = r1 .... and the verifier complains "R2 invalid mem access 'inv'" for insn #521. This is because verifier marks register r2 as unknown value after #519 where r2 is a stack pointer and r1 holds a constant value. Teach verifier to recognize "stack_ptr + imm" and "stack_ptr + reg with const val" as valid stack_ptr with new offset. Signed-off-by:
Yonghong Song <yhs@fb.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
-
Girish Moodalbail authored
[ Upstream commit 5e0740c4 ] Creating a geneve link with 'udpcsum' set results in a creation of link for which UDP checksum will NOT be computed on outbound packets, as can be seen below. 11: gen0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether c2:85:27:b6:b4:15 brd ff:ff:ff:ff:ff:ff promiscuity 0 geneve id 200 remote 192.168.13.1 dstport 6081 noudpcsum Similarly, creating a link with 'noudpcsum' set results in a creation of link for which UDP checksum will be computed on outbound packets. Fixes: 9b4437a5 ("geneve: Unify LWT and netdev handling.") Signed-off-by:
Girish Moodalbail <girish.moodalbail@oracle.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Acked-by:
Lance Richardson <lrichard@redhat.com> Signed-off-by:
-
Davide Caratti authored
[ Upstream commit d68be71e ] avoid direct access to sk->sk_state when tcp_poll() is called on a socket using active TCP fastopen with deferred connect. Use local variable 'state', which stores the result of sk_state_load(), like it was done in commit 00fd38d9 ("tcp: ensure proper barriers in lockless contexts"). Fixes: 19f6d3f3 ("net/tcp-fastopen: Add new API support") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
-
Alexandre Belloni authored
[ Upstream commit ae3696c1 ] Since 83a77e9e, the phydev irq is explicitly set to PHY_POLL when there is no pdata. It doesn't work on DT enabled platforms because the phydev irq is already set by libphy before. Fixes: 83a77e9e ("net: macb: Added PCI wrapper for Platform Driver.") Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit d557d1b5 upstream. Now that kref is using the refcount apis, the _GPL markings are getting exported to places that it previously wasn't. Now kref.h is GPLv2 licensed, so any non-GPL code using it better be talking to some lawyers, but changing api markings isn't considered "nice", so let's fix this up. Cc: Philip Müller <philm@manjaro.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Aldridge authored
commit 3c7f6221 upstream. When any of the functions contained in NGbzero.S and GENbzero.S vector through *bzero_from_clear_user, we may end up taking a fault when executing one of the store alternate address space instructions. If this happens, the exception handler does not restore the %asi register. This commit fixes the issue by introducing a new exception handler that ensures the %asi register is restored when a fault is handled. Orabug: 25577560 Signed-off-by:
Dave Aldridge <david.j.aldridge@oracle.com> Reviewed-by:
Rob Gardner <rob.gardner@oracle.com> Reviewed-by:
Babu Moger <babu.moger@oracle.com> Signed-off-by:
-
James Hughes authored
commit 9cc4b7cb upstream. The driver was making changes to the skb_header without ensuring it was writable (i.e. uncloned). This patch also removes some boiler plate header size checking/adjustment code as that is also handled by the skb_cow_header function used to make header writable. Signed-off-by:
James Hughes <james.hughes@raspberrypi.org> Acked-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
James Hughes authored
commit 455a1eb4 upstream. The incoming skb header may be resized if header space is insufficient, which might change the data adddress in the skb. Ensure that a cached pointer to that data is correctly set by moving assignment to after any possible changes. Signed-off-by:
-
Giedrius Statkevičius authored
commit bdd9968d upstream. val might become 7 in which case stime[7] (array of length 7) would be accessed during the scnprintf call later and that will cause issues. Obviously, string concatenation is not intended here so just a comma needs to be added to fix the issue. Fixes: 98a27664 ("power_supply: Add new lp8788 charger driver") Signed-off-by:
Giedrius Statkevičius <giedrius.statkevicius@gmail.com> Acked-by:
Milo Kim <milo.kim@ti.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Vincent Abriou authored
commit 2f410f88 upstream. On stih407-410 chip family the GDP layers are able to support up to UHD resolution (3840 x 2160). Signed-off-by:
Vincent Abriou <vincent.abriou@st.com> Acked-by:
Lee Jones <lee.jones@linaro.org> Tested-by:
-
Adrian Salido authored
commit 4617f564 upstream. When calling a dm ioctl that doesn't process any data (IOCTL_FLAGS_NO_PARAMS), the contents of the data field in struct dm_ioctl are left initialized. Current code is incorrectly extending the size of data copied back to user, causing the contents of kernel stack to be leaked to user. Fix by only copying contents before data and allow the functions processing the ioctl to override. Signed-off-by:
Adrian Salido <salidoa@google.com> Reviewed-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
- 01 May, 2017 1 commit
-
-
Linus Torvalds authored
-
- 30 Apr, 2017 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "The final fixes for 4.11: - prevent a triple fault with function graph tracing triggered via suspend to ram - prevent optimizing for size when function graph tracing is enabled and the compiler does not support -mfentry - prevent mwaitx() being called with a zero timeout as mwaitx() might never return. Observed on the new Ryzen CPUs" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Prevent timer value 0 for MWAITX x86/build: convert function graph '-Os' error to warning ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "A single fix for a cputime accounting regression which got introduced in the 4.11 cycle" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cputime: Fix ksoftirqd cputime accounting regression
-
Janakarajan Natarajan authored
Newer hardware has uncovered a bug in the software implementation of using MWAITX for the delay function. A value of 0 for the timer is meant to indicate that a timeout will not be used to exit MWAITX. On newer hardware this can result in MWAITX never returning, resulting in NMI soft lockup messages being printed. On older hardware, some of the other conditions under which MWAITX can exit masked this issue. The AMD APM does not currently document this and will be updated. Please refer to http://marc.info/?l=kvm&m=148950623231140 for information regarding NMI soft lockup messages on an AMD Ryzen 1800X. This has been root-caused as a 0 passed to MWAITX causing it to wait indefinitely. This change has the added benefit of avoiding the unnecessary setup of MONITORX/MWAITX when the delay value is zero. Signed-off-by:
Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Link: http://lkml.kernel.org/r/1493156643-29366-1-git-send-email-Janakarajan.Natarajan@amd.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
- 29 Apr, 2017 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull iov iter fix from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix a braino in ITER_PIPE iov_iter_revert()
-
Al Viro authored
Fixes: 27c0e374Tested-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "One odd config build fix for a recent Allwinner clock driver change that got merged. The common code called code in another file that wasn't always built. This just forces it on so people don't run into this bad configuration" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sunxi-ng: always select CCU_GATE
-
- 28 Apr, 2017 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Just a couple more stragglers, I really hope this is it. 1) Don't let frags slip down into the GRO segmentation handlers, from Steffen Klassert. 2) Truesize under-estimation triggers warnings in TCP over loopback with socket filters, 2 part fix from Eric Dumazet. 3) Fix undesirable reset of bonding MTU to ETH_HLEN on slave removal, from Paolo Abeni. 4) If we flush the XFRM policy after garbage collection, it doesn't work because stray entries can be created afterwards. Fix from Xin Long. 5) Hung socket connection fixes in TIPC from Parthasarathy Bhuvaragan. 6) Fix GRO regression with IPSEC when netfilter is disabled, from Sabrina Dubroca. 7) Fix cpsw driver Kconfig dependency regression, from Arnd Bergmann" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: hso: register netdev later to avoid a race condition net: adjust skb->truesize in ___pskb_trim() tcp: do not underestimate skb->truesize in tcp_trim_head() bonding: avoid defaulting hard_header_len to ETH_HLEN on slave removal ipv4: Don't pass IP fragments to upper layer GRO handlers. cpsw/netcp: refine cpts dependency tipc: close the connection if protocol messages contain errors tipc: improve error validations for sockets in CONNECTING state tipc: Fix missing connection request handling xfrm: fix GRO for !CONFIG_NETFILTER xfrm: do the garbage collection after flushing policy -
Andreas Kemnade authored
If the netdev is accessed before the urbs are initialized, there will be NULL pointer dereferences. That is avoided by registering it when it is fully initialized. This case occurs e.g. if dhcpcd is running in the background and the device is probed, either after insmod hso or when the device appears on the usb bus. A backtrace is the following: [ 1357.356048] usb 1-2: new high-speed USB device number 12 using ehci-omap [ 1357.551177] usb 1-2: New USB device found, idVendor=0af0, idProduct=8800 [ 1357.558654] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 1357.568572] usb 1-2: Product: Globetrotter HSUPA Modem [ 1357.574096] usb 1-2: Manufacturer: Option N.V. [ 1357.685882] hso 1-2:1.5: Not our interface [ 1460.886352] hso: unloaded [ 1460.889984] usbcore: deregistering interface driver hso [ 1513.769134] hso: ../drivers/net/usb/hso.c: Option Wireless [ 1513.846771] Unable to handle kernel NULL pointer dereference at virtual address 00000030 [ 1513.887664] hso 1-2:1.5: Not our interface [ 1513.906890] usbcore: registered new interface driver hso [ 1513.937988] pgd = ecdec000 [ 1513.949890] [00000030] *pgd=acd15831, *pte=00000000, *ppte=00000000 [ 1513.956573] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1513.962371] Modules linked in: hso usb_f_ecm omap2430 bnep bluetooth g_ether usb_f_rndis u_ether libcomposite configfs ipv6 arc4 wl18xx wlcore mac80211 cfg80211 bq27xxx_battery panel_tpo_td028ttec1 omapdrm drm_kms_helper cfbfillrect snd_soc_simple_card syscopyarea cfbimgblt snd_soc_simple_card_utils sysfillrect sysimgblt fb_sys_fops snd_soc_omap_twl4030 cfbcopyarea encoder_opa362 drm twl4030_madc_hwmon wwan_on_off snd_soc_gtm601 pwm_omap_dmtimer generic_adc_battery connector_analog_tv pwm_bl extcon_gpio omap3_isp wlcore_sdio videobuf2_dma_contig videobuf2_memops w1_bq27000 videobuf2_v4l2 videobuf2_core omap_hdq snd_soc_omap_mcbsp ov9650 snd_soc_omap bmp280_i2c bmg160_i2c v4l2_common snd_pcm_dmaengine bmp280 bmg160_core at24 bmc150_magn_i2c nvmem_core videodev phy_twl4030_usb bmc150_accel_i2c tsc2007 [ 1514.037384] bmc150_magn bmc150_accel_core media leds_tca6507 bno055 industrialio_triggered_buffer kfifo_buf gpio_twl4030 musb_hdrc snd_soc_twl4030 twl4030_vibra twl4030_madc twl4030_pwrbutton twl4030_charger industrialio w2sg0004 ehci_omap omapdss [last unloaded: hso] [ 1514.062622] CPU: 0 PID: 3433 Comm: dhcpcd Tainted: G W 4.11.0-rc8-letux+ #1 [ 1514.071136] Hardware name: Generic OMAP36xx (Flattened Device Tree) [ 1514.077758] task: ee748240 task.stack: ecdd6000 [ 1514.082580] PC is at hso_start_net_device+0x50/0xc0 [hso] [ 1514.088287] LR is at hso_net_open+0x68/0x84 [hso] [ 1514.093231] pc : [<bf79c304>] lr : [<bf79ced8>] psr: a00f0013 sp : ecdd7e20 ip : 00000000 fp : ffffffff [ 1514.105316] r10: 00000000 r9 : ed0e080c r8 : ecd8fe2c [ 1514.110839] r7 : bf79cef4 r6 : ecd8fe00 r5 : 00000000 r4 : ed0dbd80 [ 1514.117706] r3 : 00000000 r2 : c0020c80 r1 : 00000000 r0 : ecdb7800 [ 1514.124572] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 1514.132110] Control: 10c5387d Table: acdec019 DAC: 00000051 [ 1514.138153] Process dhcpcd (pid: 3433, stack limit = 0xecdd6218) [ 1514.144470] Stack: (0xecdd7e20 to 0xecdd8000) [ 1514.149078] 7e20: ed0dbd80 ecd8fe98 00000001 00000000 ecd8f800 ecd8fe00 ecd8fe60 00000000 [ 1514.157714] 7e40: ed0e080c bf79ced8 bf79ce70 ecd8f800 00000001 bf7a0258 ecd8f830 c068d958 [ 1514.166320] 7e60: c068d8b8 ecd8f800 00000001 00001091 00001090 c068dba4 ecd8f800 00001090 [ 1514.174926] 7e80: ecd8f940 ecd8f800 00000000 c068dc60 00000000 00000001 ed0e0800 ecd8f800 [ 1514.183563] 7ea0: 00000000 c06feaa8 c0ca39c2 beea57dc 00000020 00000000 306f7368 00000000 [ 1514.192169] 7ec0: 00000000 00000000 00001091 00000000 00000000 00000000 00000000 00008914 [ 1514.200805] 7ee0: eaa9ab60 beea57dc c0c9bfc0 eaa9ab40 00000006 00000000 00046858 c066a948 [ 1514.209411] 7f00: beea57dc eaa9ab60 ecc6b0c0 c02837b0 00000006 c0282c90 0000c000 c0283654 [ 1514.218017] 7f20: c09b0c00 c098bc31 00000001 c0c5e513 c0c5e513 00000000 c0151354 c01a20c0 [ 1514.226654] 7f40: c0c5e513 c01a3134 ecdd6000 c01a3160 ee7487f0 600f0013 00000000 ee748240 [ 1514.235260] 7f60: ee748734 00000000 ecc6b0c0 ecc6b0c0 beea57dc 00008914 00000006 00000000 [ 1514.243896] 7f80: 00046858 c02837b0 00001091 0003a1f0 00046608 0003a248 00000036 c01071e4 [ 1514.252502] 7fa0: ecdd6000 c0107040 0003a1f0 00046608 00000006 00008914 beea57dc 00001091 [ 1514.261108] 7fc0: 0003a1f0 00046608 0003a248 00000036 0003ac0c 00046608 00046610 00046858 [ 1514.269744] 7fe0: 0003a0ac beea57d4 000167eb b6f23106 400f0030 00000006 00000000 00000000 [ 1514.278411] [<bf79c304>] (hso_start_net_device [hso]) from [<bf79ced8>] (hso_net_open+0x68/0x84 [hso]) [ 1514.288238] [<bf79ced8>] (hso_net_open [hso]) from [<c068d958>] (__dev_open+0xa0/0xf4) [ 1514.296600] [<c068d958>] (__dev_open) from [<c068dba4>] (__dev_change_flags+0x8c/0x130) [ 1514.305023] [<c068dba4>] (__dev_change_flags) from [<c068dc60>] (dev_change_flags+0x18/0x48) [ 1514.313934] [<c068dc60>] (dev_change_flags) from [<c06feaa8>] (devinet_ioctl+0x348/0x714) [ 1514.322540] [<c06feaa8>] (devinet_ioctl) from [<c066a948>] (sock_ioctl+0x2b0/0x308) [ 1514.330627] [<c066a948>] (sock_ioctl) from [<c0282c90>] (vfs_ioctl+0x20/0x34) [ 1514.338165] [<c0282c90>] (vfs_ioctl) from [<c0283654>] (do_vfs_ioctl+0x82c/0x93c) [ 1514.346038] [<c0283654>] (do_vfs_ioctl) from [<c02837b0>] (SyS_ioctl+0x4c/0x74) [ 1514.353759] [<c02837b0>] (SyS_ioctl) from [<c0107040>] (ret_fast_syscall+0x0/0x1c) [ 1514.361755] Code: e3822103 e3822080 e1822781 e5981014 (e5832030) [ 1514.510833] ---[ end trace dfb3e53c657f34a0 ]--- Reported-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
Andreas Kemnade <andreas@kemnade.info> Reviewed-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Eric Dumazet authored
Andrey found a way to trigger the WARN_ON_ONCE(delta < len) in skb_try_coalesce() using syzkaller and a filter attached to a TCP socket. As we did recently in commit 158f323b ("net: adjust skb->truesize in pskb_expand_head()") we can adjust skb->truesize from ___pskb_trim(), via a call to skb_condense(). If all frags were freed, then skb->truesize can be recomputed. This call can be done if skb is not yet owned, or destructor is sock_edemux(). Signed-off-by:
-
