- 01 Sep, 2017 8 commits
-
-
Jose Abreu authored
I recently came upon a scenario where I would get a double fault machine check exception tiriggered by a kernel module. However the ensuing crash stacktrace (ksym lookup) was not working correctly. Turns out that machine check auto-disables MMU while modules are allocated in kernel vaddr spapce. This patch re-enables the MMU before start printing the stacktrace making stacktracing of modules work upon a fatal exception. Cc: stable@kernel.org Signed-off-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: moved code into low level handler to avoid in 2 places]
-
Jose Abreu authored
Currently we pass a string argument to show_kernel_fault_diag() which describes the reason for the fault. This is not being used so just add a pr_info() which outputs the fault information. With this change we get from: | | Path: /bin/busybox | CPU: 0 PID: 92 Comm: modprobe Not tainted 4.12.0-rc6 #30 | task: 9a254780 task.stack: 9a212000 | | [ECR ]: 0x00200400 => Other Fatal Err | to: | | Unhandled Machine Check Exception | Path: /bin/busybox | CPU: 0 PID: 92 Comm: modprobe Not tainted 4.12.0-rc6 #37 | task: 9a240780 task.stack: 9a226000 | |[ECR ]: 0x00200400 => Machine Check (Other Fatal Err) | Which can help debugging. Cc: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-
Alexey Brodkin authored
This initial port adds support of ARC HS Development Kit board with some basic features such serial port, USB, SD/MMC and Ethernet. Essentially we run Linux kernel on all 4 cores (i.e. utilize SMP) and heavily use IO Coherency for speeding-up DMA-aware peripherals. Note as opposed to other ARC boards we link Linux kernel to 0x9000_0000 intentionally because cores 1 and 3 configured with DCCM situated at our more usual link base 0x8000_0000. We still can use memory region starting at 0x8000_0000 as we reallocate DCCM in our platform code. Note that PAE remapping for DMA clients does not work due to an RTL bug, so CREG_PAE register must be programmed to all zeroes, otherwise it will cause problems with DMA to/from peripherals even if PAE40 is not used. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-
Eugeniy Paltsev authored
[Needed for HSDK] Currently the first page of system (hence RAM base) is assumed to be @ CONFIG_LINUX_LINK_BASE, where kernel itself is linked. However is case of HSDK platform, for reasons explained in that patch, this is not true. kernel needs to be linked @ 0x9000_0000 while DDR is still wired at 0x8000_0000. To properly account for this 256M of RAM, we need to introduce a new option and base page frame accountiing off of it. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: renamed CONFIG_KERNEL_RAM_BASE_ADDRESS => CONFIG_LINUX_RAM_BASE : simplified changelog]
-
Eugeniy Paltsev authored
[Needed for HSDK] - Currently IOC base is hardcoded to 0x8000_0000 which is default value of LINUX_LINK_BASE, but may not always be the case - IOC programming model imposes the constraint that IOC aperture size needs to be aligned to IOC base address, which we were not checking so far. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: reworked the changelog]
-
Vineet Gupta authored
with clk frequency setting code gone by prev commits, we can elide the unconditonal DT parsing to the specific case of quad core config where we possibly need to fudge the DT value. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-
Eugeniy Paltsev authored
Add core pll node (core_clk) to manage cpu frequency. core_clk represents pll itself. input_clk represents clock signal source (basically xtal) which comes to pll input. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-
Eugeniy Paltsev authored
historically axs103 platform code used to set the cpu clk by writing to PLL registers directly. however the axs10x clk driver is now upstream so no need to do this amymore. Driver is selected automatically when CONFIG_ARC_PLAT_AXS10X is set Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: deleted more code not needed anymore]
-
- 30 Aug, 2017 2 commits
-
-
Vineet Gupta authored
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-
Alexey Brodkin authored
Current implementation relies on L1 line length which might easily be smaller than L2 line (which is usually the case BTW). Imagine this typical case: L2 line is 128 bytes while L1 line is 64-bytes. Now we want to allocate small buffer and later use it for DMA (consider IOC is not available). kmalloc() allocates small KMALLOC_MIN_SIZE-sized, KMALLOC_MIN_SIZE-aligned That way if buffer happens to be aligned to L1 line and not L2 line we'll be flushing and invalidating extra portions of data from L2 which will cause cache coherency issues. And since KMALLOC_MIN_SIZE is bound to ARCH_DMA_MINALIGN the fix could be simple - set ARCH_DMA_MINALIGN to the largest cache line we may ever get. As of today neither L1 of ARC700 and ARC HS38 nor SLC might not be longer than 128 bytes. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-
- 28 Aug, 2017 21 commits
-
-
Liav Rehana authored
Preserve eflags and gpa1 aux during entry/exit into kernel as these could be modified by kernel mode These registers used by compare exchange instructions. - GPA1 is used for compare value, - EFLAGS got bit reflects atomic operation response. EFLAGS is zeroed for each new user task so it won't get its parent value. Signed-off-by: Liav Rehana <liavr@mellanox.com> Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-
Noam Camus authored
save EFLAGS, and GPA1 auxiliary registers during context switch, since they may be changed by the new task in kernel mode, while using atomic ops e.g. cmpxchg. Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-
Elad Kanfi authored
HW bug description: in case of HW thread context switch the dpc configuration of the exiting thread is dragged one cycle into the next thread. In order to avoid the consequences of this bug, the DPC register is set to an initial value, and not changed afterwards. Signed-off-by: Elad Kanfi <eladkan@mellanox.com> Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-
Liav Rehana authored
This commit add new configuration that enables us to distinguish between building the kernel for platforms that have a different set of auxiliary registers for each cpu and platforms that have a shared set of auxiliary registers across every thread in each core. On platforms that implement a different set of auxiliary registers disabling this configuration insures that we initialize registers on every cpu and not just for the first thread of the core. Example for non shared registers is working with EZsim (non silicon) Signed-off-by: Liav Rehana <liavr@mellanox.com> Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-
Noam Camus authored
We add ability for all cores at NPS SoC to control the number of cycles HW thread can execute before it is replace with another eligible HW thread within the same core. The replacement is done by the HW scheduler. Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: simplified handlign of out of range argument value]
-
Noam Camus authored
Some of the boot printing code had printk() w/o explicit log level. This patch introduces consistency allowing platforms to switch to less verbose console logging using cmdline. NPS400 with 4K CPUs needs to avoid the cpu info printing for faster bootup. Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-
Noam Camus authored
On ARC700 (and nSIM), user mode memory error triggers an L2 interrupt which is handled gracefully by kernel (or it tries to despite this being imprecise, and error could get charged to kernel itself). The offending task is killed and kernel moves on. NPS hardware however raises a Machine Check exception for same error which is NOT recoverable by kernel. This patch aligns kernel handling for nSIM case, to same as hardware by overriding the default user space bus error handler. Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Elad Kanfi <eladkan@mellanox.com> [vgupta: rewrote changelog] Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-
Noam Camus authored
When HW threads are active we want CPU to enter idle state only for the calling HW thread and not to put on sleep all HW threads sharing this core. For this need the NPS400 got dedicated instruction so only calling thread is entring sleep and all other are still awake and can execute instructions. Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: reworked patch to not use inline ifdef but a new function itself]
-
Vineet Gupta authored
This paves way for creating a 3rd variant needed for NPS ARC700 without littering ifdey'ery all over the place Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-
Noam Camus authored
This way when we execute "ex" during trying to hold lock we can switch to other HW thread and utilize the core intead of just spinning on a lock. We noticed about 10% improvement of execution time with hackbench test. Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-
Vineet Gupta authored
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-
Noam Camus authored
This counter represents threshold for consecutive stall which would trigger HW threads scheduling. However when enabled, low threshhold values cause performance degradation and in the worst case even livelock. So disable it by resorting to HW reset value Signed-off-by: Noam Camus <noamca@mellanox.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: fixed changelog]
-
Noam Camus authored
Due to a HW bug in NPS400 we get from time to time false TLB miss. Workaround this by validating each miss. Signed-off-by: Noam Camus <noamca@mellanox.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-
Noam Camus authored
Signed-off-by: Noam Camus <noamca@mellanox.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-
Liav Rehana authored
Signed-off-by: Liav Rehana <liavr@mellanox.com> Signed-off-by: Noam Camus <noamca@mellanox.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-
Liav Rehana authored
Signed-off-by: Liav Rehana <liavr@mellanox.com> Signed-off-by: Noam Camus <noamca@mellanox.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU fix from Joerg Roedel: "Another fix, this time in common IOMMU sysfs code. In the conversion from the old iommu sysfs-code to the iommu_device_register interface, I missed to update the release path for the struct device associated with an IOMMU. It freed the 'struct device', which was a pointer before, but is now embedded in another struct. Freeing from the middle of allocated memory had all kinds of nasty side effects when an IOMMU was unplugged. Unfortunatly nobody unplugged and IOMMU until now, so this was not discovered earlier. The fix is to make the 'struct device' a pointer again" * tag 'iommu-fixes-v4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: Fix wrong freeing of iommu_device->dev
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc fix from Greg KH: "Here is a single misc driver fix for 4.13-rc7. It resolves a reported problem in the Android binder driver due to previous patches in 4.13-rc. It's been in linux-next with no reported issues" * tag 'char-misc-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: ANDROID: binder: fix proc->tsk check.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/iio fixes from Greg KH: "Here are few small staging driver fixes, and some more IIO driver fixes for 4.13-rc7. Nothing major, just resolutions for some reported problems. All of these have been in linux-next with no reported problems" * tag 'staging-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: magnetometer: st_magn: remove ihl property for LSM303AGR iio: magnetometer: st_magn: fix status register address for LSM303AGR iio: hid-sensor-trigger: Fix the race with user space powering up sensors iio: trigger: stm32-timer: fix get trigger mode iio: imu: adis16480: Fix acceleration scale factor for adis16480 PATCH] iio: Fix some documentation warnings staging: rtl8188eu: add RNX-N150NUB support Revert "staging: fsl-mc: be consistent when checking strcmp() return" iio: adc: stm32: fix common clock rate iio: adc: ina219: Avoid underflow for sleeping time iio: trigger: stm32-timer: add enable attribute iio: trigger: stm32-timer: fix get/set down count direction iio: trigger: stm32-timer: fix write_raw return value iio: trigger: stm32-timer: fix quadrature mode get routine iio: bmp280: properly initialize device for humidity reading
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB fixes from Jon Mason: "NTB bug fixes to address an incorrect ntb_mw_count reference in the NTB transport, improperly bringing down the link if SPADs are corrupted, and an out-of-order issue regarding link negotiation and data passing" * tag 'ntb-4.13-bugfixes' of git://github.com/jonmason/ntb: ntb: ntb_test: ensure the link is up before trying to configure the mws ntb: transport shouldn't disable link due to bogus values in SPADs ntb: use correct mw_count function in ntb_tool and ntb_transport
-
- 27 Aug, 2017 3 commits
-
-
Linus Torvalds authored
The "lock_page_killable()" function waits for exclusive access to the page lock bit using the WQ_FLAG_EXCLUSIVE bit in the waitqueue entry set. That means that if it gets woken up, other waiters may have been skipped. That, in turn, means that if it sees the page being unlocked, it *must* take that lock and return success, even if a lethal signal is also pending. So instead of checking for lethal signals first, we need to check for them after we've checked the actual bit that we were waiting for. Even if that might then delay the killing of the process. This matches the order of the old "wait_on_bit_lock()" infrastructure that the page locking used to use (and is still used in a few other areas). Note that if we still return an error after having unsuccessfully tried to acquire the page lock, that is ok: that means that some other thread was able to get ahead of us and lock the page, and when that other thread then unlocks the page, the wakeup event will be repeated. So any other pending waiters will now get properly woken up. Fixes: 62906027 ("mm: add PageWaiters indicating tasks are waiting for a page bit") Cc: Nick Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jan Kara <jack@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Tim Chen and Kan Liang have been battling a customer load that shows extremely long page wakeup lists. The cause seems to be constant NUMA migration of a hot page that is shared across a lot of threads, but the actual root cause for the exact behavior has not been found. Tim has a patch that batches the wait list traversal at wakeup time, so that we at least don't get long uninterruptible cases where we traverse and wake up thousands of processes and get nasty latency spikes. That is likely 4.14 material, but we're still discussing the page waitqueue specific parts of it. In the meantime, I've tried to look at making the page wait queues less expensive, and failing miserably. If you have thousands of threads waiting for the same page, it will be painful. We'll need to try to figure out the NUMA balancing issue some day, in addition to avoiding the excessive spinlock hold times. That said, having tried to rewrite the page wait queues, I can at least fix up some of the braindamage in the current situation. In particular: (a) we don't want to continue walking the page wait list if the bit we're waiting for already got set again (which seems to be one of the patterns of the bad load). That makes no progress and just causes pointless cache pollution chasing the pointers. (b) we don't want to put the non-locking waiters always on the front of the queue, and the locking waiters always on the back. Not only is that unfair, it means that we wake up thousands of reading threads that will just end up being blocked by the writer later anyway. Also add a comment about the layout of 'struct wait_page_key' - there is an external user of it in the cachefiles code that means that it has to match the layout of 'struct wait_bit_key' in the two first members. It so happens to match, because 'struct page *' and 'unsigned long *' end up having the same values simply because the page flags are the first member in struct page. Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Christopher Lameter <cl@linux.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
We have a MAX_LFS_FILESIZE macro that is meant to be filled in by filesystems (and other IO targets) that know they are 64-bit clean and don't have any 32-bit limits in their IO path. It turns out that our 32-bit value for that limit was bogus. On 32-bit, the VM layer is limited by the page cache to only 32-bit index values, but our logic for that was confusing and actually wrong. We used to define that value to (((loff_t)PAGE_SIZE << (BITS_PER_LONG-1))-1) which is actually odd in several ways: it limits the index to 31 bits, and then it limits files so that they can't have data in that last byte of a page that has the highest 31-bit index (ie page index 0x7fffffff). Neither of those limitations make sense. The index is actually the full 32 bit unsigned value, and we can use that whole full page. So the maximum size of the file would logically be "PAGE_SIZE << BITS_PER_LONG". However, we do wan tto avoid the maximum index, because we have code that iterates over the page indexes, and we don't want that code to overflow. So the maximum size of a file on a 32-bit host should actually be one page less than the full 32-bit index. So the actual limit is ULONG_MAX << PAGE_SHIFT. That means that we will not actually be using the page of that last index (ULONG_MAX), but we can grow a file up to that limit. The wrong value of MAX_LFS_FILESIZE actually caused problems for Doug Nazar, who was still using a 32-bit host, but with a 9.7TB 2 x RAID5 volume. It turns out that our old MAX_LFS_FILESIZE was 8TiB (well, one byte less), but the actual true VM limit is one page less than 16TiB. This was invisible until commit c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()"), which started applying that MAX_LFS_FILESIZE limit to block devices too. NOTE! On 64-bit, the page index isn't a limiter at all, and the limit is actually just the offset type itself (loff_t), which is signed. But for clarity, on 64-bit, just use the maximum signed value, and don't make people have to count the number of 'f' characters in the hex constant. So just use LLONG_MAX for the 64-bit case. That was what the value had been before too, just written out as a hex constant. Fixes: c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()") Reported-and-tested-by: Doug Nazar <nazard@nazar.ca> Cc: Andreas Dilger <adilger@dilger.ca> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 26 Aug, 2017 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: - a tweak to the IBM Trackpoint driver that helps recognizing trackpoints on never Lenovo Carbons - a fix to the ALPS driver solving scroll issues on some Dells - yet another ACPI ID has been added to Elan I2C toucpad driver - quieted diagnostic message in soc_button_array driver * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad Input: soc_button_array - silence -ENOENT error on Dell XPS13 9365 Input: trackpoint - add new trackpoint firmware ID Input: elan_i2c - add ELAN0602 ACPI ID to support Lenovo Yoga310
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fix from Bjorn Helgaas: "Remove needlessly alarming MSI affinity warning (this is not actually a bug fix, but the warning prompts unnecessary bug reports)" * tag 'pci-v4.13-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/MSI: Don't warn when irq_create_affinity_masks() returns NULL
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Two fixes: one for an ldt_struct handling bug and a cherry-picked objtool fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix use-after-free of ldt_struct objtool: Fix '-mtune=atom' decoding support in objtool 2.0
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Ingo Molnar: "Fix a timer granularity handling race+bug, which would manifest itself by spuriously increasing timeouts of some timers (from 1 jiffy to ~500 jiffies in the worst case measured) in certain nohz states" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Fix excessive granularity of new timers after a nohz idle
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fix from Ingo Molnar: "A single fix to not allow nonsensical event groups that result in kernel warnings" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix group {cpu,task} validation
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "6 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/memblock.c: reversed logic in memblock_discard() fork: fix incorrect fput of ->exe_file causing use-after-free mm/madvise.c: fix freeing of locked page with MADV_FREE dax: fix deadlock due to misaligned PMD faults mm, shmem: fix handling /sys/kernel/mm/transparent_hugepage/shmem_enabled PM/hibernate: touch NMI watchdog when creating snapshot
-