Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-01-03 (igc)

Muhammad Husaini Zulkifli says:

Improvements to the Time-Sensitive Networking (TSN) Qbv Scheduling
capabilities were included in this patch series for I226 SKU.

An overview of each patch series is given below:

Patch 1: To enable basetime scheduling in the future, remove the existing
restriction for i226 stepping while maintain the restriction for i225.
Patch 2: Remove the restriction which require a controller reset when
setting the basetime register for new i226 steps and enable the second
GCL configuration.
Patch 3: Remove the power reset adapter during disabling the tsn config.
---
Patches remaining from initial PR:
https://lore.kernel.org/netdev/20221205212414.3197525-1-anthony.l.nguyen@intel.com/

after sending net patches:
https://lore.kernel.org/netdev/20221215230758.3595578-1-anthony.l.nguyen@intel.com/

Note: patch 3 is an additional patch from the initial PR.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

I225 have limitation when programming the BaseTime register which required
a power cycle of the controller. This limitation already lifted in I226.
This patch removes the restriction so that when user configure/remove any
TSN mode, it would not go into power cycle reset adapter.

How to test:

Schedule any gate control list configuration or delete it.

Example:

1)

BASE_TIME=$(date +%s%N)
tc qdisc replace dev $interface_name parent root handle 100 taprio \
    num_tc 4 \
    map 3 1 0 2 3 3 3 3 3 3 3 3 3 3 3 3 \
    queues 1@0 1@1 1@2 1@3 \
    base-time $BASE_TIME \
    sched-entry S 0F 1000000 \
    flags 0x2

2) tc qdisc del dev $intername_name root
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Make reset task only executes for i225 and Qbv disabling to allow
i226 configure for 2nd GCL without resetting the adapter.

In i226, Tx won't hang if there is a GCL is already running, so in
this case we don't need to set FutScdDis bit.
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Remove the Qbv BaseTime restriction for I226 so that the BaseTime can be
scheduled to the future time. A new register bit of Tx Qav Control
(Bit-7: FutScdDis) was introduced to allow I226 scheduling future time as
Qbv BaseTime and not having the Tx hang timeout issue.

Besides, according to datasheet section 7.5.2.9.3.3, FutScdDis bit has to
be configured first before the cycle time and base time.

Indeed the FutScdDis bit is only active on re-configuration, thus we have
to set the BASET_L to zero and then only set it to the desired value.

Please also note that the Qbv configuration flow is moved around based on
the Qbv programming guideline that is documented in the latest datasheet.
Co-developed-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, netfilter and can.

  Current release - regressions:

   - bpf: synchronize dispatcher update with bpf_dispatcher_xdp_func

   - rxrpc:
      - fix security setting propagation
      - fix null-deref in rxrpc_unuse_local()
      - fix switched parameters in peer tracing

  Current release - new code bugs:

   - rxrpc:
      - fix I/O thread startup getting skipped
      - fix locking issues in rxrpc_put_peer_locked()
      - fix I/O thread stop
      - fix uninitialised variable in rxperf server
      - fix the return value of rxrpc_new_incoming_call()

   - microchip: vcap: fix initialization of value and mask

   - nfp: fix unaligned io read of capabilities word

  Previous releases - regressions:

   - stop in-kernel socket users from corrupting socket's task_frag

   - stream: purge sk_error_queue in sk_stream_kill_queues()

   - openvswitch: fix flow lookup to use unmasked key

   - dsa: mv88e6xxx: avoid reg_lock deadlock in mv88e6xxx_setup_port()

   - devlink:
      - hold region lock when flushing snapshots
      - protect devlink dump by the instance lock

  Previous releases - always broken:

   - bpf:
      - prevent leak of lsm program after failed attach
      - resolve fext program type when checking map compatibility

   - skbuff: account for tail adjustment during pull operations

   - macsec: fix net device access prior to holding a lock

   - bonding: switch back when high prio link up

   - netfilter: flowtable: really fix NAT IPv6 offload

   - enetc: avoid buffer leaks on xdp_do_redirect() failure

   - unix: fix race in SOCK_SEQPACKET's unix_dgram_sendmsg()

   - dsa: microchip: remove IRQF_TRIGGER_FALLING in
     request_threaded_irq"

* tag 'net-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
  net: fec: check the return value of build_skb()
  net: simplify sk_page_frag
  Treewide: Stop corrupting socket's task_frag
  net: Introduce sk_use_task_frag in struct sock.
  mctp: Remove device type check at unregister
  net: dsa: microchip: remove IRQF_TRIGGER_FALLING in request_threaded_irq
  can: kvaser_usb: hydra: help gcc-13 to figure out cmd_len
  can: flexcan: avoid unbalanced pm_runtime_enable warning
  Documentation: devlink: add missing toc entry for etas_es58x devlink doc
  mctp: serial: Fix starting value for frame check sequence
  nfp: fix unaligned io read of capabilities word
  net: stream: purge sk_error_queue in sk_stream_kill_queues()
  myri10ge: Fix an error handling path in myri10ge_probe()
  net: microchip: vcap: Fix initialization of value and mask
  rxrpc: Fix the return value of rxrpc_new_incoming_call()
  rxrpc: rxperf: Fix uninitialised variable
  rxrpc: Fix I/O thread stop
  rxrpc: Fix switched parameters in peer tracing
  rxrpc: Fix locking issues in rxrpc_put_peer_locked()
  rxrpc: Fix I/O thread startup getting skipped
  ...

Pull vfsuid cleanup from Christian Brauner:
 "This moves the ima specific vfs{g,u}id_t comparison helpers out of the
  header and into the one file in ima where they are used.

  We shouldn't incentivize people to use them by placing them into the
  header. As discussed and suggested by Linus in [1] let's just define
  them locally in the one file in ima where they are used"

Link: https://lore.kernel.org/lkml/CAHk-=wj4BpEwUd=OkTv1F9uykvSrsBNZJVHMp+p_+e2kiV71_A@mail.gmail.com [1]

* tag 'fs.vfsuid.ima.v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  mnt_idmapping: move ima-only helpers to ima

Pull more random number generator updates from Jason Donenfeld:
 "Two remaining changes that are now possible after you merged a few
  other trees:

   - #include <asm/archrandom.h> can be removed from random.h now,
     making the direct use of the arch_random_* API more of a private
     implementation detail between the archs and random.c, rather than
     something for general consumers.

   - Two additional uses of prandom_u32_max() snuck in during the
     initial phase of pulls, so these have been converted to
     get_random_u32_below(), and now the deprecated prandom_u32_max()
     alias -- which was just a wrapper around get_random_u32_below() --
     can be removed.

  In addition, there is one fix:

   - Check efi_rt_services_supported() before attempting to use an EFI
     runtime function.

     This affected EFI systems that disable runtime services yet still
     boot via EFI (e.g. the reporter's Lenovo Thinkpad X13s laptop), as
     well systems where EFI runtime services have been forcibly
     disabled, such as on PREEMPT_RT.

     On those machines, a very early and hard to diagnose crash would
     happen, preventing boot"

* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  prandom: remove prandom_u32_max()
  efi: random: fix NULL-deref when refreshing seed
  random: do not include <asm/archrandom.h> from random.h

Merge tag 'rcu-urgent.2022.12.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull RCU fix from Paul McKenney:
 "This fixes a lockdep false positive in synchronize_rcu() that can
  otherwise occur during early boot.

  The fix simply avoids invoking lockdep if the scheduler has not yet
  been initialized, that is, during that portion of boot when interrupts
  are disabled"

* tag 'rcu-urgent.2022.12.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  rcu: Don't assert interrupts enabled too early in boot

The build_skb might return a null pointer but there is no check on the
return value in the fec_enet_rx_queue(). So a null pointer dereference
might occur. To avoid this, we check the return value of build_skb. If
the return value is a null pointer, the driver will recycle the page and
update the statistic of ndev. Then jump to rx_processing_done to clear
the status flags of the BD so that the hardware can recycle the BD.

Fixes: 95698ff6 ("net: fec: using page pool to manage RX buffers")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Shenwei Wang <Shenwei.wang@nxp.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20221219022755.1047573-1-wei.fang@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull m68knommu update from Greg Ungerer:
 "Only a single change to use the safer strscpy() instead of strncpy()
  when setting up the cmdline"

* tag 'm68knommu-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: use strscpy() to instead of strncpy()

Pull SPDX/License additions from Greg KH:
 "Here are two small updates for LICENSES and some kernel files that add
  the Copyleft-next license and use it in a SPDX tag as a dual-license
  for some kernel files.

  These have been discussed thoroughly in public on the linux-spdx
  mailing list, and have the needed acks on them, as well as having been
  in linux-next with no reported issues for quite some time"

* tag 'spdx-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  testing: use the copyleft-next-0.3.1 SPDX tag
  LICENSES: Add the copyleft-next-0.3.1 license

Pull more devicetree updates from Rob Herring:
 "This is mostly a treewide clean-up from Krzysztof. There's also a
  couple of fixes and things that fell thru the cracks.

  I must say this has been a nice merge window without bindings dumped
  in at the last minute introducing warnings.

  Summary:

   - Treewide dropping of redundant 'binding' or 'schema' from schema
     titles. This will be followed up with a automated check to catch
     these.

   - Re-sort vendor-prefies

   - Convert GPIO based watchdog to schema

   - Handle all the variations for clocks, resets, power domains in i.MX
     PCIe binding

   - Document missing 'power-domains' property in mxsfb

   - Fix error with path references in Tegra XUSB example

   - Honor CONFIG_CMDLINE* even without /chosen node"

* tag 'devicetree-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: drop redundant part of title (manual)
  dt-bindings: clock: drop redundant part of title
  dt-bindings: drop redundant part of title (beginning)
  dt-bindings: drop redundant part of title (end, part three)
  dt-bindings: drop redundant part of title (end, part two)
  dt-bindings: drop redundant part of title (end)
  dt-bindings: clock: st,stm32mp1-rcc: add proper title
  dt-bindings: memory-controllers: ti,gpmc-child: drop redundant part of title
  dt-bindings: drop redundant part of title of shared bindings
  dt-bindings: watchdog: gpio: Convert bindings to YAML
  dt-bindings: imx6q-pcie: Handle more resets on legacy platforms
  dt-bindings: imx6q-pcie: Handle various PD configurations
  dt-bindings: imx6q-pcie: Handle various clock configurations
  dt-bindings: hwmon: ntc-thermistor: drop Naveen Krishna Chatradhi from maintainers
  dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property
  dt-bindings: vendor-prefixes: sort entries alphabetically
  dt-bindings: usb: tegra-xusb: Remove path references
  of: fdt: Honor CONFIG_CMDLINE* even without /chosen node

Pull parisc updates from Helge Deller:
 "There is one noteable patch, which allows the parisc kernel to use the
  same MADV_xxx constants as the other architectures going forward. With
  that change only alpha has one entry left (MADV_DONTNEED is 6 vs 4 on
  others) which is different. To prevent an ABI breakage, a wrapper is
  included which translates old MADV values to the new ones, so existing
  userspace isn't affected. Reason for that patch is, that some
  applications wrongly used the standard MADV_xxx values even on some
  non-x86 platforms and as such those programs failed to run correctly
  on parisc (examples are qemu-user, tor browser and boringssl).

  Then the kgdb console and the LED code received some fixes, and some
  0-day warnings are now gone. Finally, the very last compile warning
  which was visible during a kernel build is now fixed too (in the vDSO
  code).

  The majority of the patches are tagged for stable series and in
  summary this patchset is quite small and drops more code than it adds:

Fixes:
   - Fix potential null-ptr-deref in start_task()
   - Fix kgdb console on serial port
   - Add missing FORCE prerequisites in Makefile
   - Drop PMD_SHIFT from calculation in pgtable.h

  Enhancements:
   - Implement a wrapper to align madvise() MADV_* constants with other
     architectures
   - If machine supports running MPE/XL, show the MPE model string

  Cleanups:
   - Drop duplicate kgdb console code
   - Indenting fixes in setup_cmdline()"

* tag 'parisc-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Show MPE/iX model string at bootup
  parisc: Add missing FORCE prerequisites in Makefile
  parisc: Move pdc_result struct to firmware.c
  parisc: Drop locking in pdc console code
  parisc: Drop duplicate kgdb_pdc console
  parisc: Fix locking in pdc_iodc_print() firmware call
  parisc: Drop PMD_SHIFT from calculation in pgtable.h
  parisc: Align parisc MADV_XXX constants with all other architectures
  parisc: led: Fix potential null-ptr-deref in start_task()
  parisc: Fix inconsistent indenting in setup_cmdline()

Pull asm-generic updates from Arnd Bergmann:
 "There are only three fairly simple patches.

  The #include change to linux/swab.h addresses a userspace build issue,
  and the change to the mmio tracing logic helps provide more useful
  traces"

* tag 'asm-generic-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  uapi: Add missing _UAPI prefix to <asm-generic/types.h> include guard
  asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info
  include/uapi/linux/swab: Fix potentially missing __always_inline

Convert the final two users of prandom_u32_max() that slipped in during
6.2-rc1 to use get_random_u32_below().

Then, with no more users left, we can finally remove the deprecated
function.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Do not try to refresh the RNG seed in case the firmware does not support
setting variables.

This is specifically needed to prevent a NULL-pointer dereference on the
Lenovo X13s with some firmware revisions, or more generally, whenever
the runtime services have been disabled (e.g. efi=noruntime or with
PREEMPT_RT).

Fixes: e7b813b3 ("efi: random: refresh non-volatile random seed when RNG is initialized")
Reported-by: Steev Klimaszewski <steev@kali.org>
Reported-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

The <asm/archrandom.h> header is a random.c private detail, not
something to be called by other code. As such, don't make it
automatically available by way of random.h.

Cc: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Merge tag 'linux-can-fixes-for-6.2-20221219' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2022-12-19

The first patch is by Vincent Mailhol and adds the etas_es58x
devlink documentation to the index.

Haibo Chen's patch for the flexcan driver fixes a unbalanced
pm_runtime_enable warning.

The last patch is by me, targets the kvaser_usb driver and fixes
an error occurring with gcc-13.

* tag 'linux-can-fixes-for-6.2-20221219' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: kvaser_usb: hydra: help gcc-13 to figure out cmd_len
  can: flexcan: avoid unbalanced pm_runtime_enable warning
  Documentation: devlink: add missing toc entry for etas_es58x devlink doc
====================

Link: https://lore.kernel.org/r/20221219155210.1143439-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Benjamin Coddington says:

====================
Stop corrupting socket's task_frag

The networking code uses flags in sk_allocation to determine if it can use
current->task_frag, however in-kernel users of sockets may stop setting
sk_allocation when they convert to the preferred memalloc_nofs_save/restore,
as SUNRPC has done in commit a1231fda ("SUNRPC: Set memalloc_nofs_save()
on all rpciod/xprtiod jobs").

This will cause corruption in current->task_frag when recursing into the
network layer for those subsystems during page fault or reclaim.  The
corruption is difficult to diagnose because stack traces may not contain the
offending subsystem at all.  The corruption is unlikely to show up in
testing because it requires memory pressure, and so subsystems that
convert to memalloc_nofs_save/restore are likely to continue to run into
this issue.

Previous reports and proposed fixes:
https://lore.kernel.org/netdev/96a18bd00cbc6cb554603cc0d6ef1c551965b078.1663762494.git.gnault@redhat.com/
https://lore.kernel.org/netdev/b4d8cb09c913d3e34f853736f3f5628abfd7f4b6.1656699567.git.gnault@redhat.com/
https://lore.kernel.org/linux-nfs/de6d99321d1dcaa2ad456b92b3680aa77c07a747.1665401788.git.gnault@redhat.com/

Guilluame Nault has done all of the hard work tracking this problem down and
finding the best fix for this issue.  I'm just taking a turn posting another
fix.
====================

Link: https://lore.kernel.org/r/cover.1671194454.git.bcodding@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Now that in-kernel socket users that may recurse during reclaim have benn
converted to sk_use_task_frag = false, we can have sk_page_frag() simply
check that value.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Since moving to memalloc_nofs_save/restore, SUNRPC has stopped setting the
GFP_NOIO flag on sk_allocation which the networking system uses to decide
when it is safe to use current->task_frag.  The results of this are
unexpected corruption in task_frag when SUNRPC is involved in memory
reclaim.

The corruption can be seen in crashes, but the root cause is often
difficult to ascertain as a crashing machine's stack trace will have no
evidence of being near NFS or SUNRPC code.  I believe this problem to
be much more pervasive than reports to the community may indicate.

Fix this by having kernel users of sockets that may corrupt task_frag due
to reclaim set sk_use_task_frag = false.  Preemptively correcting this
situation for users that still set sk_allocation allows them to convert to
memalloc_nofs_save/restore without the same unexpected corruptions that are
sure to follow, unlikely to show up in testing, and difficult to bisect.

CC: Philipp Reisner <philipp.reisner@linbit.com>
CC: Lars Ellenberg <lars.ellenberg@linbit.com>
CC: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Josef Bacik <josef@toxicpanda.com>
CC: Keith Busch <kbusch@kernel.org>
CC: Christoph Hellwig <hch@lst.de>
CC: Sagi Grimberg <sagi@grimberg.me>
CC: Lee Duncan <lduncan@suse.com>
CC: Chris Leech <cleech@redhat.com>
CC: Mike Christie <michael.christie@oracle.com>
CC: "James E.J. Bottomley" <jejb@linux.ibm.com>
CC: "Martin K. Petersen" <martin.petersen@oracle.com>
CC: Valentina Manea <valentina.manea.m@gmail.com>
CC: Shuah Khan <shuah@kernel.org>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: David Howells <dhowells@redhat.com>
CC: Marc Dionne <marc.dionne@auristor.com>
CC: Steve French <sfrench@samba.org>
CC: Christine Caulfield <ccaulfie@redhat.com>
CC: David Teigland <teigland@redhat.com>
CC: Mark Fasheh <mark@fasheh.com>
CC: Joel Becker <jlbec@evilplan.org>
CC: Joseph Qi <joseph.qi@linux.alibaba.com>
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: Dominique Martinet <asmadeus@codewreck.org>
CC: Ilya Dryomov <idryomov@gmail.com>
CC: Xiubo Li <xiubli@redhat.com>
CC: Chuck Lever <chuck.lever@oracle.com>
CC: Jeff Layton <jlayton@kernel.org>
CC: Trond Myklebust <trond.myklebust@hammerspace.com>
CC: Anna Schumaker <anna@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Sockets that can be used while recursing into memory reclaim, like
those used by network block devices and file systems, mustn't use
current->task_frag: if the current process is already using it, then
the inner memory reclaim call would corrupt the task_frag structure.

To avoid this, sk_page_frag() uses ->sk_allocation to detect sockets
that mustn't use current->task_frag, assuming that those used during
memory reclaim had their allocation constraints reflected in
->sk_allocation.

This unfortunately doesn't cover all cases: in an attempt to remove all
usage of GFP_NOFS and GFP_NOIO, sunrpc stopped setting these flags in
->sk_allocation, and used memalloc_nofs critical sections instead.
This breaks the sk_page_frag() heuristic since the allocation
constraints are now stored in current->flags, which sk_page_frag()
can't read without risking triggering a cache miss and slowing down
TCP's fast path.

This patch creates a new field in struct sock, named sk_use_task_frag,
which sockets with memory reclaim constraints can set to false if they
can't safely use current->task_frag. In such cases, sk_page_frag() now
always returns the socket's page_frag (->sk_frag). The first user is
sunrpc, which needs to avoid using current->task_frag but can keep
->sk_allocation set to GFP_KERNEL otherwise.

Eventually, it might be possible to simplify sk_page_frag() by only
testing ->sk_use_task_frag and avoid relying on the ->sk_allocation
heuristic entirely (assuming other sockets will set ->sk_use_task_frag
according to their constraints in the future).

The new ->sk_use_task_frag field is placed in a hole in struct sock and
belongs to a cache line shared with ->sk_shutdown. Therefore it should
be hot and shouldn't have negative performance impacts on TCP's fast
path (sk_shutdown is tested just before the while() loop in
tcp_sendmsg_locked()).

Link: https://lore.kernel.org/netdev/b4d8cb09c913d3e34f853736f3f5628abfd7f4b6.1656699567.git.gnault@redhat.com/Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The unregister check could be incorrectly triggered if a netdev
changes its type after register. That is possible for a tun device
using TUNSETLINK ioctl, resulting in mctp unregister failing
and the netdev unregister waiting forever.

This was encountered by https://github.com/openthread/openthread/issues/8523

Neither check at register or unregister is required. They were added in
an attempt to track down mctp_ptr being set unexpectedly, which should
not happen in normal operation.

Fixes: 7b1871af ("mctp: Warn if pointer is set for a wrong dev type")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20221215054933.2403401-1-matt@codeconstruct.com.auSigned-off-by: Jakub Kicinski <kuba@kernel.org>

KSZ swithes used interrupts for detecting the phy link up and down.
During registering the interrupt handler, it used IRQF_TRIGGER_FALLING
flag. But this flag has to be retrieved from device tree instead of hard
coding in the driver, so removing the flag.

Fixes: ff319a64 ("net: dsa: microchip: move interrupt handling logic from lan937x to ksz_common")
Reported-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://lore.kernel.org/r/20221213101440.24667-1-arun.ramadoss@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull ARM SoC fixes from Arnd Bergmann:
 "These are a couple of build fixes from randconfig testing, plus a set
  of Mediatek SoC specific fixes, all trivial"

* tag 'soc-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  soc: tegra: fix CPU_BIG_ENDIAN dependencies
  ARM: disallow pre-ARMv5 builds with ld.lld
  ARM: pxa: fix building with clang
  MAINTAINERS: add related dts to IXP4xx
  ARM: dts: spear: drop 0x from unit address
  arm64: dts: mt8183: Fix Mali GPU clock
  arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon
  soc: mediatek: pm-domains: Fix the power glitch issue

Pull Kbuild updates from Masahiro Yamada:

 - Support zstd-compressed debug info

 - Allow W=1 builds to detect objects shared among multiple modules

 - Add srcrpm-pkg target to generate a source RPM package

 - Make the -s option detection work for future GNU Make versions

 - Add -Werror to KBUILD_CPPFLAGS when CONFIG_WERROR=y

 - Allow W=1 builds to detect -Wundef warnings in any preprocessed files

 - Raise the minimum supported version of binutils to 2.25

 - Use $(intcmp ...) to compare integers if GNU Make >= 4.4 is used

 - Use $(file ...) to read a file if GNU Make >= 4.2 is used

 - Print error if GNU Make older than 3.82 is used

 - Allow modpost to detect section mismatches with Clang LTO

 - Include vmlinuz.efi into kernel tarballs for arm64 CONFIG_EFI_ZBOOT=y

* tag 'kbuild-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits)
  buildtar: fix tarballs with EFI_ZBOOT enabled
  modpost: Include '.text.*' in TEXT_SECTIONS
  padata: Mark padata_work_init() as __ref
  kbuild: ensure Make >= 3.82 is used
  kbuild: refactor the prerequisites of the modpost rule
  kbuild: change module.order to list *.o instead of *.ko
  kbuild: use .NOTINTERMEDIATE for future GNU Make versions
  kconfig: refactor Makefile to reduce process forks
  kbuild: add read-file macro
  kbuild: do not sort after reading modules.order
  kbuild: add test-{ge,gt,le,lt} macros
  Documentation: raise minimum supported version of binutils to 2.25
  kbuild: add -Wundef to KBUILD_CPPFLAGS for W=1 builds
  kbuild: move -Werror from KBUILD_CFLAGS to KBUILD_CPPFLAGS
  kbuild: Port silent mode detection to future gnu make.
  init/version.c: remove #include <generated/utsrelease.h>
  firmware_loader: remove #include <generated/utsrelease.h>
  modpost: Mark uuid_le type to be suitable only for MEI
  kbuild: add ability to make source rpm buildable using koji
  kbuild: warn objects shared among multiple modules
  ...

Pull zstd updates from Nick Terrell:
 "Update the kernel to upstream zstd v1.5.2 [0]. Specifically to the tag
  v1.5.2-kernel [1] which includes several cherrypicked fixes for the
  kernel on top of v1.5.2.

  Excepting the MAINTAINERS change, all the changes in this can be
  generated by:

    git clone https://github.com/facebook/zstd
    cd zstd/contrib/linux-kernel
    git checkout v1.5.2-kernel
    LINUX=/path/to/linux/repo make import

  Additionally, this includes several minor typo fixes, which have all
  been fixed upstream so they are maintained on the next import"

Link: https://github.com/facebook/zstd/releases/tag/v1.5.2 [0]
Link: https://github.com/facebook/zstd/tree/v1.5.2-kernel [1]
Link: https://lore.kernel.org/lkml/20221024202606.404049-1-nickrterrell@gmail.com/
Link: https://github.com/torvalds/linux/commit/637a642f5ca5e850186bb64ac75ebb0f124b458d

* tag 'zstd-linus-v6.2' of https://github.com/terrelln/linux:
  zstd: import usptream v1.5.2
  zstd: Move zstd-common module exports to zstd_common_module.c
  lib: zstd: Fix comment typo
  lib: zstd: fix repeated words in comments
  MAINTAINERS: git://github -> https://github.com for terrelln
  lib: zstd: clean up double word in comment.

Merge tag 'v6.1-soc-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/fixes

PM domains: enable isolation before resetting power

* tag 'v6.1-soc-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  soc: mediatek: pm-domains: Fix the power glitch issue

Link: https://lore.kernel.org/r/29c8b913-53cf-096f-fe44-832ceaeac116@suse.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v6.1-dts64-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/fixes

MT8183: fix phandle for GPU clock
MT8195 demo: fix size of secmon reserved memory area

* tag 'v6.1-dts64-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm64: dts: mt8183: Fix Mali GPU clock
  arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon

Link: https://lore.kernel.org/r/af4c45ce-a150-438f-dab4-e47b120c32c4@suse.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

My previous patch to prevent BPMP from being enabled on big
endian kernels caused a build regression:

WARNING: unmet direct dependencies detected for TEGRA_BPMP
  Depends on [n]: ARCH_TEGRA [=y] && TEGRA_HSP_MBOX [=y] && TEGRA_IVC [=y] && !CPU_BIG_ENDIAN [=y]
  Selected by [y]:
  - ARCH_TEGRA_186_SOC [=y] && ARCH_TEGRA [=y] && ARM64 [=y]
  - ARCH_TEGRA_194_SOC [=y] && ARCH_TEGRA [=y] && ARM64 [=y]
  - ARCH_TEGRA_234_SOC [=y] && ARCH_TEGRA [=y] && ARM64 [=y]

Add even more such dependencies for the SoC types that use
the BPMP driver.

Fixes: 4ddb1bf1 ("tegra: mark BPMP driver as little-endian only")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221215165336.1781080-1-arnd@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

lld cannot build for ARMv4/v4T targets because it inserts 'blx' instructions
that are unsupported there:

  ld.lld: warning: lld uses blx instruction, no object with architecture supporting feature detected

Add a Kconfig time dependency to prevent those targets from being
selected in randconfig builds.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/llvm/llvm-project/issues/50764
Link: https://github.com/ClangBuiltLinux/linux/issues/964
Link: https://lore.kernel.org/r/20221215162635.3750763-1-arnd@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The integrated assembler in clang does not understand the xscale
specific mra/mar instructions:

arch/arm/mach-pxa/pxa27x.c:136:15: error: unsupported architectural extension: xscale
        asm volatile(".arch_extension xscale\n\t"
arch/arm/mach-pxa/pxa27x.c:136:40: error: invalid instruction, did you mean: mcr, mla, mrc, mrs, msr?
        mra r2, r3, acc0

Since these are coprocessor features, the same can be expressed using
mrrc/mcrr, so use that for builds with IAS.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20221215162529.3659187-1-arnd@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

get_maintainer.pl currently give no maintainer on all IXP4xx DTS files.
Add them to the set of files handled by IXP4xx maintainers.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221005105734.3513581-1-clabbe@baylibre.com
Link: https://lore.kernel.org/r/20221214204223.177807-1-linus.walleij@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

By coding style, unit address should not start with 0x.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20221210113347.63939-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Pull more nfsd updates from Chuck Lever:
 "This contains a number of crasher fixes that were not ready for the
  initial pull request last week.

  In particular, Jeff's patch attempts to address reference count
  underflows in NFSD's filecache, which have been very difficult to
  track down because there is no reliable reproducer.

  Common failure modes:
      https://bugzilla.kernel.org/show_bug.cgi?id=216691#c11
      https://bugzilla.kernel.org/show_bug.cgi?id=216674#c6
      https://bugzilla.redhat.com/show_bug.cgi?id=2138605

  The race windows were found by inspection and the clean-ups appear
  sensible and pass regression testing, so we include them here in the
  hope that they address the problem. However we remain vigilant because
  we don't have 100% certainty yet that the problem is fully addressed.

  Summary:

   - Address numerous reports of refcount underflows in NFSD's filecache

   - Address a UAF in callback setup error handling

   - Address a UAF during server-to-server copy"

* tag 'nfsd-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  NFSD: fix use-after-free in __nfs42_ssc_open()
  nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure
  nfsd: rework refcounting in filecache

Some (mostly 64-bit machines) machines allow to run MPE/iX and report the MPE
model string via firmware call. Enhance the pdc_model_sysmodel() function to
report that model string.
Note that some 32-bit machines like the B160L wrongly report success for the
firmware call, so include a check to prevent showing wrong info.
Signed-off-by: Helge Deller <deller@gmx.de>

Debian's gcc-13 [1] throws the following error in
kvaser_usb_hydra_cmd_size():

[1] gcc version 13.0.0 20221214 (experimental) [master r13-4693-g512098a3316] (Debian 13-20221214-1)

| drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c:502:65: error:
| array subscript ‘struct kvaser_cmd_ext[0]’ is partly outside array
| bounds of ‘unsigned char[32]’ [-Werror=array-bounds=]
|   502 |                 ret = le16_to_cpu(((struct kvaser_cmd_ext *)cmd)->len);

kvaser_usb_hydra_cmd_size() returns the size of given command. It
depends on the command number (cmd->header.cmd_no). For extended
commands (cmd->header.cmd_no == CMD_EXTENDED) the above shown code is
executed.

Help gcc to recognize that this code path is not taken in all cases,
by calling kvaser_usb_hydra_cmd_size() directly after assigning the
command number.

Fixes: aec5fb22 ("can: kvaser_usb: Add support for Kvaser USB hydra family")
Cc: Jimmy Assarsson <extja@kvaser.com>
Cc: Anssi Hannula <anssi.hannula@bitwise.fi>
Link: https://lore.kernel.org/all/20221219110104.1073881-1-mkl@pengutronix.deTested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

When do suspend/resume, meet the following warning message:
[   30.028336] flexcan 425b0000.can: Unbalanced pm_runtime_enable!

Balance the pm_runtime_force_suspend() and pm_runtime_force_resume().

Fixes: 8cb53b48 ("can: flexcan: add auto stop mode for IMX93 to support wakeup")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/all/20221213094351.3023858-1-haibo.chen@nxp.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

toc entry is missing for etas_es58x devlink doc and triggers this warning:

  Documentation/networking/devlink/etas_es58x.rst: WARNING: document isn't included in any toctree

Add the missing toc entry.

Fixes: 9f63f96a ("Documentation: devlink: add devlink documentation for the etas_es58x driver")
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20221213051136.721887-1-mailhol.vincent@wanadoo.frReported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>