- 03 Aug, 2018 8 commits
-
-
Guillaume Nault authored
Consolidate retrieval of tunnel's socket mtu in order to simplify l2tp_eth and l2tp_ppp a bit. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Salil Mehta says: ==================== Some important fixes for HNS3 driver This patch presents some important fixes related to MSIX allocation in HNS3 driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
The offset of msix number for roce is different between different revision id. We should get it from firmware, instead of a fix value. This patch refines the msix allocation, make it compatible. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
The msix number for vf is different, depends on the max vf number. Futherly if the vf supports roce, the offset of msix is not fixed. It's incorrect to fix the msix number to 33. This patch fixes it by querying the msix number from firmware, and adjusting it with roce support. Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kees Cook authored
The use of SKCIPHER_REQUEST_ON_STACK() will trigger FRAME_WARN warnings (when less than 2048) once the VLA is no longer hidden from the check: net/rxrpc/rxkad.c:398:1: warning: the frame size of 1152 bytes is larger than 1024 bytes [-Wframe-larger-than=] net/rxrpc/rxkad.c:242:1: warning: the frame size of 1152 bytes is larger than 1024 bytes [-Wframe-larger-than=] This passes the initial SKCIPHER_REQUEST_ON_STACK allocation to the leaf functions for reuse. Two requests allocated on the stack is not needed when only one is used at a time. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
User was able to perform filter flush on chain 0 even if it didn't have any filters in it. With the patch that avoided implicit chain 0 creation, this changed. So in case user wants filter flush on chain which does not exist, just return success. There's no reason for non-0 chains to behave differently than chain 0, so do the same for them. Reported-by: Ido Schimmel <idosch@mellanox.com> Fixes: f71e0ca4 ("net: sched: Avoid implicit chain 0 creation") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
The else-if branch and else branch set mac_ok to true similarly, so combine the two into single else branch. Also add comments to explain the two conditions, which from Michael Chan and Vasundhara Volam. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
commit 38d5d3b3 ("bpf: Introduce BPF_ANNOTATE_KV_PAIR") added to the bpf and net trees what commit 92b57121 ("bpf: btf: export btf types and name by offset from lib") has already added to bpf-next/net-next, but in slightly different location. Remove the duplicates (to fix build of libbpf). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 02 Aug, 2018 21 commits
-
-
Matthieu Baerts authored
This refactoring work has been started by David Howells in cdfbabfb (net: Work around lockdep limitation in sockets that use sockets) but the exact same day in 581319c5 (net/socket: use per af lockdep classes for sk queues), Paolo Abeni added new classes. This reduces the amount of (nearly) duplicated code and eases the addition of new socket types. Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
Return statements in functions returning bool should use true or false instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
Variables 'max_frm' and 'tmp_mac_key' are being assigned, but are never used,hence they are redundant and can be removed. fix fllowing warning: drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c:461:6: warning: variable 'max_frm' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:1685:31: warning: variable 'tmp_mac_key' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:1855:41: warning: variable 'tmp_mac_key' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Arun Parameswaran says: ==================== Add clock config and pm support to bcm iProc mdio mux The patchset extends the Broadcom iProc mdio mux to add support for suspend/resume and the ability to configure the internal clock divider. The patchset also sets the scan control register to disable external master access. The base address of the mdio-mux-bcm-iproc is modified to point to the start of the mdio block's address space, to be able to access all the mdio's registers. The missing registers are required to configure the internal clock divider registers in some of the Broadcom SoC's. Changes from v3: - Removed 'platform_set_drvdata(pdev, NULL)' call (in patch 5/8) - Fixed the return code handling for the devm_clk_get() call (in patch 7/8) - Added Reviewed-by tag to Patch 8/8 Changes from v2: - Addressed Andrew's comments: - Moved to using devm_mdiobus_alloc. Added this as a separate patch. - Changed to reverse christmas tree order for variable declaration in the clock patch - Addressed Florian's comments: - Removed null checks for the clock before calling unprepare in both clock and pm patches. - Added check for EPROBE_DEFER when fetching the clock in the clock patch. - The patch to use the devm API has been added before the clock & pm patches. This patch is now patch '5' in the series. - Added reviewed-by tags to commit messages of patches which remain unmodified from v2. - Modified PM patch to use platform_get_drvdata() in suspend/resume API's, similar to the recent fix that went in for the remove() api. Changes from v1: - Addressed Andrew's comments. - Reworked the patches to be based on 'net-next' - Removed 'fixes' from the commit messages, the changes are related to the new features being added. - Maintained backward compatibility to older dt-blob's specifying base addresse with an offset. The correction is applied in the driver and a message is printed to update the dt-blob. - Re-worked and re-ordered the last four patches (4-7). - Added setting of the scan control register as a new patch - Added a call to 'clk_prepare_enable()' in the patch that adds the clock config support, removed the debug message when clock is not passed. - Simplified the pm support patch (removed the array used for the save/restore logic). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arun Parameswaran authored
Add support for suspend and resume to the Broadcom iProc mdio mux driver. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arun Parameswaran authored
Add support to configure the internal rate adjust register based on the core clock supplied through device tree in the Broadcom iProc mdio mux. The operating frequency of the mdio mux block is 11MHz. This is derrived by dividing the clock to the mdio mux with the rate adjust register. In some SoC's the default values of the rate adjust register do not yield 11MHz. These SoC's are required to specify the clock via the device tree for proper operation. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arun Parameswaran authored
Add clock phandle, of the core clock driving the mdio block, as an optional property to the Broadcom iProc mdio mux. The clock, when specified, will be used to setup the rate adjust registers in the mdio to derrive the mdio's operating frequency. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arun Parameswaran authored
Use devm_mdiobus_alloc() instead of mdiobus_alloc() in the Broadcom iProc mdio mux driver. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arun Parameswaran authored
Configure the scan control register in the Broadcom iProc mdio mux driver to disable access to external master. In some SoC's, the scan control register defaults to an incorrect value. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arun Parameswaran authored
Modify the base address of the mdio mux driver to point to the start of the mdio mux block's register address space. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arun Parameswaran authored
Modify the register offsets in the Broadcom iProc mdio mux to start from the top of the register address space. Earlier, the base address pointed to the end of the block's register space. The base address will now point to the start of the mdio's address space. The offsets have been fixed to match this. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arun Parameswaran authored
Modify the base address of the Broadcom iProc MDIO mux driver to point to the start of the block's register address space. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
The BTF conflicts were simple overlapping changes. The virtio_net conflict was an overlap of a fix of statistics counter, happening alongisde a move over to a bonafide statistics structure rather than counting value on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Trivial fix to spelling mistake in dev_info message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ganesh Goudar authored
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefan Agner authored
Check DMA addressing limitations as suggested by the DMA API how-to. This does not fix a particular issue seen but is considered good style. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Fugang Duan <fugang.duan@nxp.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Fixes gcc '-Wunused-but-set-variable' warning: net/rxrpc/proc.c: In function 'rxrpc_call_seq_show': net/rxrpc/proc.c:66:29: warning: variable 'nowj' set but not used [-Wunused-but-set-variable] unsigned long timeout = 0, nowj; ^ Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Fixes keep trickling in: 1) Various IP fragmentation memory limit hardening changes from Eric Dumazet. 2) Revert ipv6 metrics leak change, it causes more problems than it fixes for now. 3) Fix WoL regression in stmmac driver, from Jose Abreu. 4) Netlink socket spectre v1 gadget fix, from Jeremy Cline" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: Revert "net/ipv6: fix metrics leak" rxrpc: Fix user call ID check in rxrpc_service_prealloc_one net: dsa: Do not suspend/resume closed slave_dev netlink: Fix spectre v1 gadget in netlink_create() Documentation: dpaa2: Use correct heading adornment net: stmmac: Fix WoL for PCI-based setups bonding: avoid lockdep confusion in bond_get_stats() enic: do not call enic_change_mtu in enic_probe ipv4: frags: handle possible skb truesize change inet: frag: enforce memory limits earlier net/mlx5e: IPoIB, Set the netdevice sw mtu in ipoib enhanced flow net/mlx5e: Fix null pointer access when setting MTU of vport representor net/mlx5e: Set port trust mode to PCP as default net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager net: dsa: mv88e6xxx: Fix SERDES support on 88E6141/6341 brcmfmac: fix regression in parsing NVRAM for multiple devices iwlwifi: add more card IDs for 9000 series
-
Phillip Lougher authored
Previously in squashfs_readpage() when copying data into the page cache, it used the length of the datablock read from the filesystem (after decompression). However, if the filesystem has been corrupted this data block may be short, which will leave pages unfilled. The fix for this is to compute the expected number of bytes to copy from the inode size, and use this to detect if the block is short. Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk> Tested-by: Willy Tarreau <w@1wt.eu> Cc: Анатолий Тросиненко <anatoly.trosinenko@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
The squashfs fragment reading code doesn't actually verify that the fragment is inside the fragment table. The end result _is_ verified to be inside the image when actually reading the fragment data, but before that is done, we may end up taking a page fault because the fragment table itself might not even exist. Another report from Anatoly and his endless squashfs image fuzzing. Reported-by: Анатолий Тросиненко <anatoly.trosinenko@gmail.com> Acked-by:: Phillip Lougher <phillip.lougher@gmail.com>, Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David S. Miller authored
This reverts commit df18b504. This change causes other problems and use-after-free situations as found by syzbot. Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 Aug, 2018 11 commits
-
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fix from Russell King: "Just a single fix this time around for recent binutils causing build problems when generating Thumb-2 code" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8781/1: Fix Thumb-2 syscall return for binutils 2.29+
-
Vincent Bernat authored
Fixes: 83ba4645 ("net: add helpers checking if socket can be bound to nonlocal address") Signed-off-by: Vincent Bernat <vincent@bernat.im> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
Commit 2c4541e2 ("mm: use vma_init() to initialize VMAs on stack and data segments") tried to initialize various left-over ad-hoc vma's "properly", but actually made things worse for the temporary vma's used for TLB flushing. vma_init() doesn't actually initialize all of the vma, just a few fields, so doing something like - struct vm_area_struct vma = { .vm_mm = tlb->mm, }; + struct vm_area_struct vma; + + vma_init(&vma, tlb->mm); was actually very bad: instead of having a nicely initialized vma with every field but "vm_mm" zeroed, you'd have an entirely uninitialized vma with only a couple of fields initialized. And they weren't even fields that the code in question mostly cared about. The flush_tlb_range() function takes a "struct vma" rather than a "struct mm_struct", because a few architectures actually care about what kind of range it is - being able to only do an ITLB flush if it's a range that doesn't have data accesses enabled, for example. And all the normal users already have the vma for doing the range invalidation. But a few people want to call flush_tlb_range() with a range they just made up, so they also end up using a made-up vma. x86 just has a special "flush_tlb_mm_range()" function for this, but other architectures (arm and ia64) do the "use fake vma" thing instead, and thus got caught up in the vma_init() changes. At the same time, the TLB flushing code really doesn't care about most other fields in the vma, so vma_init() is just unnecessary and pointless. This fixes things by having an explicit "this is just an initializer for the TLB flush" initializer macro, which is used by the arm/arm64/ia64 people who mis-use this interface with just a dummy vma. Fixes: 2c4541e2 ("mm: use vma_init() to initialize VMAs on stack and data segments") Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Delete the old VM_BUG_ON_VMA() from zap_pmd_range(), which asserted that mmap_sem must be held when splitting an "anonymous" vma there. Whether that's still strictly true nowadays is not entirely clear, but the danger of sometimes crashing on the BUG is now fairly clear. Even with the new stricter rules for anonymous vma marking, the condition it checks for can possible trigger. Commit 44960f2a ("staging: ashmem: Fix SIGBUS crash when traversing mmaped ashmem pages") is good, and originally I thought it was safe from that VM_BUG_ON_VMA(), because the /dev/ashmem fd exposed to the user is disconnected from the vm_file in the vma, and madvise(,,MADV_REMOVE) insists on VM_SHARED. But after I read John's earlier mail, drawing attention to the vfs_fallocate() in there: I may be wrong, and I don't know if Android has THP in the config anyway, but it looks to me like an unmap_mapping_range() from ashmem's vfs_fallocate() could hit precisely the VM_BUG_ON_VMA(), once it's vma_is_anonymous(). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsDavid S. Miller authored
David Howells says: ==================== rxrpc: Development Here are some patches that add some more tracepoints to AF_RXRPC and fix some issues therein. The most significant points are: (1) Display the call timeout information in /proc/net/rxrpc/calls. (2) Save the call's debug_id in the rxrpc_channel struct so that it can be used in traces after the rxrpc_call struct has been destroyed. (3) Increase the size of the kAFS Rx window from 32 to 63 to be about the same as the Auristor server. (4) Propose the terminal ACK for a client call after it has received all its data to be transmitted after a short interval so that it will get transmitted if not first superseded by a new call on the same channel. (5) Flush ACKs during the data reception if we detect that we've run out of data.[*] (6) Trace successful packet transmission and softirq to process context socket notification. [*] Note that on a uncontended gigabit network, rxrpc runs in to trouble with ACK packets getting batched together (up to ~32 at a time) somewhere between the IP transmit queue on the client and the ethernet receive queue on the server. I can see the kernel afs filesystem client and Auristor userspace server stalling occasionally on a 512MB single read. Sticking tracepoints in the network driver at either end seems to show that, although the ACK transmissions made by the client are reasonably spaced timewise, the received ACKs come in batches from the network card on the server. I'm not sure what, if anything, can be done about this. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
There just check the user call ID isn't already in use, hence should compare user_call_ID with xcall->user_call_ID, which is current node's user_call_ID. Fixes: 540b1c48 ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg") Suggested-by: David Howells <dhowells@redhat.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fix from Ulf Hansson: "MMC host: mxcmmc: Fix build error for powerpc" * tag 'mmc-v4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mxcmmc: Fix missing parentheses and brace
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix the scope of a recent intel_pstate driver optimization used incorrectly on some systems due to processor identification ambiguity and fix a few issues in the turbostat utility, including three recent regressions. Specifics: - Use ACPI FADT preferred PM Profile to distinguish Skylake desktop processors from some server ones with the same model number in order to limit the scope of the recent IO-wait boost optimization to servers, as intended (Srinivas Pandruvada). - Fix several issues in the turbostat utility: * Fix the -S option on 1-CPU systems (Len Brown). * Fix computations using incorrect processor core counts (Artem Bityutskiy). * Fix the x2apic debug message (Len Brown). * Fix logical node enumeration to allow for non-sequential physical nodes (Prarit Bhargava). * Fix reported family on modern AMD processors (Calvin Walton). * Clarify the RAPL column information in the man page (Len Brown)" * tag 'pm-urgent-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Limit the scope of HWP dynamic boost platforms tools/power turbostat: version 18.07.27 tools/power turbostat: Read extended processor family from CPUID tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes tools/power turbostat: fix x2apic debug message output file tools/power turbostat: fix bogus summary values tools/power turbostat: fix -S on UP systems tools/power turbostat: Update turbostat(8) RAPL throttling column description
-
Linus Torvalds authored
Anatoly continues to find issues with fuzzed squashfs images. This time, corrupt, missing, or undersized data for the page filling wasn't checked for, because the squashfs_{copy,read}_cache() functions did the squashfs_copy_data() call without checking the resulting data size. Which could result in the page cache pages being incompletely filled in, and no error indication to the user space reading garbage data. So make a helper function for the "fill in pages" case, because the exact same incomplete sequence existed in two places. [ I should have made a squashfs branch for these things, but I didn't intend to start doing them in the first place. My historical connection through cramfs is why I got into looking at these issues at all, and every time I (continue to) think it's a one-off. Because _this_ time is always the last time. Right? - Linus ] Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Tested-by: Willy Tarreau <w@1wt.eu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Phillip Lougher <phillip@squashfs.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
John Stultz authored
Amit Pundir and Youling in parallel reported crashes with recent mainline kernels running Android: F DEBUG : *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** F DEBUG : Build fingerprint: 'Android/db410c32_only/db410c32_only:Q/OC-MR1/102:userdebug/test-key F DEBUG : Revision: '0' F DEBUG : ABI: 'arm' F DEBUG : pid: 2261, tid: 2261, name: zygote >>> zygote <<< F DEBUG : signal 7 (SIGBUS), code 2 (BUS_ADRERR), fault addr 0xec00008 ... <snip> ... F DEBUG : backtrace: F DEBUG : #00 pc 00001c04 /system/lib/libc.so (memset+48) F DEBUG : #01 pc 0010c513 /system/lib/libart.so (create_mspace_with_base+82) F DEBUG : #02 pc 0015c601 /system/lib/libart.so (art::gc::space::DlMallocSpace::CreateMspace(void*, unsigned int, unsigned int)+40) F DEBUG : #03 pc 0015c3ed /system/lib/libart.so (art::gc::space::DlMallocSpace::CreateFromMemMap(art::MemMap*, std::__1::basic_string<char, std::__ 1::char_traits<char>, std::__1::allocator<char>> const&, unsigned int, unsigned int, unsigned int, unsigned int, bool)+36) ... This was bisected back to commit bfd40eaf ("mm: fix vma_is_anonymous() false-positives"). create_mspace_with_base() in the trace above, utilizes ashmem, and with ashmem, for shared mappings we use shmem_zero_setup(), which sets the vma->vm_ops to &shmem_vm_ops. But for private ashmem mappings nothing sets the vma->vm_ops. Looking at the problematic patch, it seems to add a requirement that one call vma_set_anonymous() on a vma, otherwise the dummy_vm_ops will be used. Using the dummy_vm_ops seem to triggger SIGBUS when traversing unmapped pages. Thus, this patch adds a call to vma_set_anonymous() for ashmem private mappings and seems to avoid the reported problem. Fixes: bfd40eaf ("mm: fix vma_is_anonymous() false-positives") Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Colin Cross <ccross@google.com> Cc: Matthew Wilcox <willy@infradead.org> Reported-by: Amit Pundir <amit.pundir@linaro.org> Reported-by: Youling 257 <youling257@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ganesh Goudar authored
For FW_PORT_ACTION_GET_PORT_INFO32 messages, the u.info32.lstatus32_to_cbllen32 is 32-bit Big Endian. We need to translate that to CPU Endian in order to test F_FW_PORT_CMD_DCBXDIS32. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-