- 27 Mar, 2006 20 commits
-
-
Ian Kent authored
Change the names of the boolean functions autofs4_check_mount and autofs4_check_tree to autofs4_mount_busy and autofs4_tree_busy respectively and alters their return codes to suit in order to aid code readabilty. A couple of white space cleanups are included as well. Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Ian Kent authored
Addresse a problem where stale dentrys stop mounts from happening. When a mount point directory is pre-created and a non-existent entry within it is requested a dentry ends up being created within the mount point directory which stops future mounts. The problem is solved by ignoring negative, unhashed dentrys in the mount point d_subdirs list. Additionally the apparent cacheing of -ENOENT returns from requests is removed. The test on d_time is a tautology and d_time is not initialised and has an unexpected value. In short it doesn't do what it's meant to. The cacheing of failed requests to the daemon is important and will be followed up later. Signed-off-by:
-
Ian Kent authored
Change readdir routines to use the cursor based routines in libfs.c. This removes reliance on old readdir code from 2.4 and should improve efficiency of readdir in autofs4. Signed-off-by:
-
Ian Kent authored
Whitespace and formating changes to lookup code. Signed-off-by:
-
Jeff Dike authored
Noted by Oleg Drokin: We initialized an extra slot of struct kstatfs.spare, sometimes causing stack corruption. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Oleg Drokin <green@clusterfs.com> Signed-off-by:
-
Jeff Dike authored
This fixes a race in the starting of write_sigio_thread. Previously, some of the data needed by the thread was initialized after the clone. If the thread ran immediately, it would see the uninitialized data, including an empty pollfds, which would cause it to hang. We move the data initialization to before the clone, and adjust the error paths and cleanup accordingly. Signed-off-by:
-
Jeff Dike authored
Behavior when booting two UMLs with the same umid was broken. The second one would steal the umid. This fixes that, making the second UML take a random umid instead. Signed-off-by:
-
Jeff Dike authored
This fixes a process segfault where a signal was being delivered such that a new stack page needed to be allocated to hold the signal frame. This was tripping some logic in the page fault handler which wouldn't allocate the page if the faulting address was more that 32 bytes lower than the current stack pointer. Since a signal frame is greater than 32 bytes, this exercised that case. It's fixed by updating the SP in the pt_regs before starting to copy the signal frame. Since those are the registers that will be copied on to the stack, we have to be careful to put the original SP, not the new one which points to the signal frame, on the stack. Signed-off-by:
-
Jeff Dike authored
This adds a 'c' option to the ubd switch which turns off host file locking so that the device can be shared, as with a cluster. There's also some whitespace cleanup while I was in this file. Signed-off-by:
-
Jeff Dike authored
This rearranges the OS declarations by moving some declarations into os.h. Signed-off-by:
-
Jeff Dike authored
The serial UML OS-abstraction layer patch (um/kernel dir). This moves all systemcalls from tty_log.c file under os-Linux dir Signed-off-by:
Gennady Sharapov <Gennady.V.Sharapov@intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Bodo Stroesser authored
For security reasons, UML in is_syscall() needs to have access to code in vsyscall-page. The current implementation grants this access by explicitly allowing access to vsyscall in access_ok_skas(). With this change, copy_from_user() may be used to read the code. Ptrace access to vsyscall-page for debugging already was implemented in get_user_pages() by mainline. In i386, copy_from_user can't access vsyscall-page, but returns EFAULT. To make UML behave as i386 does, I changed is_syscall to use access_process_vm(current) to read the code from vsyscall-page. This doesn't hurt security, but simplifies the code and prepares implementation of stub-vmas. Signed-off-by:
Bodo Stroesser <bstroesser@fujitsu-siemens.com> Signed-off-by:
-
Jeff Dike authored
The serial UML OS-abstraction layer patch (um/kernel dir). This moves sigio_user.c to os-Linux dir Signed-off-by:
-
Jeff Dike authored
The serial UML OS-abstraction layer patch (um/kernel dir). This moves all startup code from sigio_user.c file under os-Linux dir Signed-off-by:
-
Jeff Dike authored
The serial UML OS-abstraction layer patch (um/kernel dir). This joins irq_user.c and irq.c files. Signed-off-by:
-
Jeff Dike authored
The serial UML OS-abstraction layer patch (um/kernel dir). This moves all systemcalls from irq_user.c file under os-Linux dir Signed-off-by:
-
Jeff Dike authored
Some printf formats are incorrect for large memory sizes. Signed-off-by:
-
Jeff Dike authored
This fixes a conflict between a header and what gcc "knows" the declaration' to be. Signed-off-by:
-
Jeff Dike authored
Fix a gcc warning about losing qualifiers to the first argument of copy_from_user. The typeof change for correctness, and fixes a lot of the warnings, but there are some cases where x has some extra qualifiers, like volatile, which copy_from_user can't know about. For these, the void * cast seems to be necessary. Also cleaned up some of the whitespace and got rid of the emacs comment at the bottom. Signed-off-by:
-
OGAWA Hirofumi authored
Current timer_pm.c reads I/O port triple times, in order to avoid the bug of chipset. But I/O port is slow. 2.6.16 (pmtmr) Simple gettimeofday: 3.6532 microseconds 2.6.16+patch (pmtmr) Simple gettimeofday: 1.4582 microseconds [if chip is buggy, probably it will be 7us or more in 4.2% of probability.] This patch adds blacklist of buggy chip, and if chip is not buggy, this uses fast normal version instead of slow workaround version. If chip is buggy, warnings "pmtmr is slow". But sounds like there is gray zone. I found the PIIX4 errata, but I couldn't find the ICH4 errata. But some motherboard seems to have problem. So, if we found a ICH4, generate warnings, and use a workaround version. If user's ICH4 is good, the user can specify the "pmtmr_good" boot parameter to use fast version. Acked-by:
John Stultz <johnstul@us.ibm.com> Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
- 26 Mar, 2006 20 commits
-
-
David S. Miller authored
Kbuild now points these out. Signed-off-by:David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: -
Manfred Spraul authored
Ingo's sem2mutex patch incorrectly replaced one reference to ipc/sem.c with ipc/mutex.c in a comment. Signed-off-by:
Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: drivers/char/ftape/lowlevel/fdc-io.c: Correct a comment Kconfig help: MTD_JEDECPROBE already supports Intel Remove ugly debugging stuff do_mounts.c: Minor ROOT_DEV comment cleanup BUG_ON() Conversion in drivers/s390/block/dasd_devmap.c BUG_ON() Conversion in mm/mempool.c BUG_ON() Conversion in mm/memory.c BUG_ON() Conversion in kernel/fork.c BUG_ON() Conversion in ipc/sem.c BUG_ON() Conversion in fs/ext2/ BUG_ON() Conversion in fs/hfs/ BUG_ON() Conversion in fs/dcache.c BUG_ON() Conversion in fs/buffer.c BUG_ON() Conversion in input/serio/hp_sdc_mlc.c BUG_ON() Conversion in md/dm-table.c BUG_ON() Conversion in md/dm-path-selector.c BUG_ON() Conversion in drivers/isdn BUG_ON() Conversion in drivers/char BUG_ON() Conversion in drivers/mtd/
-
Bastien Roucaries authored
This patch correct a comment about cli(). Signed-off-by:
Bastien Roucaries <roucaries.bastien@gmail.com> Signed-off-by:
Adrian Bunk <bunk@stusta.de>
-
Adrian Bunk authored
Intel chips are already supported. Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
Akinobu Mita authored
<linux@horizon.com> wrote: This is an extremely well-known technique. You can see a similar version that uses a multiply for the last few steps at http://graphics.stanford.edu/~seander/bithacks.html#CountBitsSetParallel whch refers to "Software Optimization Guide for AMD Athlon 64 and Opteron Processors" http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/25112.PDF It's section 8.6, "Efficient Implementation of Population-Count Function in 32-bit Mode", pages 179-180. It uses the name that I am more familiar with, "popcount" (population count), although "Hamming weight" also makes sense. Anyway, the proof of correctness proceeds as follows: b = a - ((a >> 1) & 0x55555555); c = (b & 0x33333333) + ((b >> 2) & 0x33333333); d = (c + (c >> 4)) & 0x0f0f0f0f; #if SLOW_MULTIPLY e = d + (d >> 8) f = e + (e >> 16); return f & 63; #else /* Useful if multiply takes at most 4 cycles */ return (d * 0x01010101) >> 24; #endif The input value a can be thought of as 32 1-bit fields each holding their own hamming weight. Now look at it as 16 2-bit fields. Each 2-bit field a1..a0 has the value 2*a1 + a0. This can be converted into the hamming weight of the 2-bit field a1+a0 by subtracting a1. That's what the (a >> 1) & mask subtraction does. Since there can be no borrows, you can just do it all at once. Enumerating the 4 possible cases: 0b00 = 0 -> 0 - 0 = 0 0b01 = 1 -> 1 - 0 = 1 0b10 = 2 -> 2 - 1 = 1 0b11 = 3 -> 3 - 1 = 2 The next step consists of breaking up b (made of 16 2-bir fields) into even and odd halves and adding them into 4-bit fields. Since the largest possible sum is 2+2 = 4, which will not fit into a 4-bit field, the 2-bit ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ "which will not fit into a 2-bit field" fields have to be masked before they are added. After this point, the masking can be delayed. Each 4-bit field holds a population count from 0..4, taking at most 3 bits. These numbers can be added without overflowing a 4-bit field, so we can compute c + (c >> 4), and only then mask off the unwanted bits. This produces d, a number of 4 8-bit fields, each in the range 0..8. From this point, we can shift and add d multiple times without overflowing an 8-bit field, and only do a final mask at the end. The number to mask with has to be at least 63 (so that 32 on't be truncated), but can also be 128 or 255. The x86 has a special encoding for signed immediate byte values -128..127, so the value of 255 is slower. On other processors, a special "sign extend byte" instruction might be faster. On a processor with fast integer multiplies (Athlon but not P4), you can reduce the final few serially dependent instructions to a single integer multiply. Consider d to be 3 8-bit values d3, d2, d1 and d0, each in the range 0..8. The multiply forms the partial products: d3 d2 d1 d0 d3 d2 d1 d0 d3 d2 d1 d0 + d3 d2 d1 d0 ---------------------- e3 e2 e1 e0 Where e3 = d3 + d2 + d1 + d0. e2, e1 and e0 obviously cannot generate any carries. Signed-off-by:
Akinobu Mita <mita@miraclelinux.com> Signed-off-by:
-
Artem B. Bityuckiy authored
Signed-off-by: -
Akinobu Mita authored
By defining generic hweight*() routines - hweight64() will be defined on all architectures - hweight_long() will use architecture optimized hweight32() or hweight64() I found two possible cleanups by these reasons. Signed-off-by:
-
Akinobu Mita authored
generic_{ffs,fls,fls64,hweight{64,32,16,8}}() were moved into include/asm-generic/bitops.h. So all architectures don't use them. Signed-off-by: -
Akinobu Mita authored
Now the only user who are using generic_ffs() is ntfs filesystem. This patch isolates generic_ffs() as ntfs_ffs() for ntfs. Signed-off-by:
-
Akinobu Mita authored
The find_*_bit() routines are defined to work on a pointer to unsigned long. But partial_page.bitmap is unsigned int and it is passed to find_*_bit() in arch/ia64/ia32/sys_ia32.c. So the compiler will print warnings. This patch changes to unsigned long instead. Signed-off-by:
-
Akinobu Mita authored
The test_bit() routines are defined to work on a pointer to unsigned long. But thread_info.flags is __u32 (unsigned int) on sh and it is passed to flag set/clear/test wrappers in include/linux/thread_info.h. So the compiler will print warnings. This patch changes to unsigned long instead. Signed-off-by:
-
Akinobu Mita authored
Currently include/asm-generic/bitops.h is not referenced from anywhere. But it will be the benefit of those who are trying to port Linux to another architecture. So update it by same manner Signed-off-by:
-
Akinobu Mita authored
- remove {,test_and_}{set,clear,change}_bit() - remove __{,test_and_}{set,clear,change}_bit() and test_bit() - remove generic_fls64() - remove find_{next,first}{,_zero}_bit() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove generic_hweight{32,16,8}() - remove sched_find_first_bit() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() Signed-off-by: -
Akinobu Mita authored
- remove sched_find_first_bit() - remove generic_hweight{64,32,16,8}() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() Signed-off-by: -
Akinobu Mita authored
- remove ffz() - remove find_{next,first}{,_zero}_bit() - remove generic_ffs() - remove generic_fls() - remove generic_fls64() - remove __ffs() - remove sched_find_first_bit() - remove generic_hweight{32,16,8}() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() Signed-off-by: -
Akinobu Mita authored
- remove __{,test_and_}{set,clear,change}_bit() and test_bit() - remove ffz() - remove __ffs() - remove generic_fls() - remove generic_fls64() - remove sched_find_first_bit() - remove ffs() - unless defined(ULTRA_HAS_POPULATION_COUNT) - remove generic_hweight{64,32,16,8}() - remove find_{next,first}{,_zero}_bit() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() Signed-off-by: -
Akinobu Mita authored
- remove __{,test_and_}{set,clear,change}_bit() and test_bit() - remove ffz() - remove __ffs() - remove sched_find_first_bit() - remove ffs() - remove generic_fls() - remove generic_fls64() - remove generic_hweight{32,16,8}() - remove find_{next,first}{,_zero}_bit() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove ext2_{set,clear}_bit_atomic() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() Signed-off-by: -
Akinobu Mita authored
- remove __{,test_and_}{set,clear,change}_bit() and test_bit() - remove __ffs() - remove find_{next,first}{,_zero}_bit() - remove generic_hweight{32,16,8}() - remove sched_find_first_bit() - remove generic_ffs() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove ext2_{set,clear}_bit_atomic() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() - remove generic_fls() - remove generic_fls64() Signed-off-by:
-
