- 01 Oct, 2020 40 commits
-
-
Marc Zyngier authored
commit c4ad98e4 upstream. KVM currently assumes that an instruction abort can never be a write. This is in general true, except when the abort is triggered by a S1PTW on instruction fetch that tries to update the S1 page tables (to set AF, for example). This can happen if the page tables have been paged out and brought back in without seeing a direct write to them (they are thus marked read only), and the fault handling code will make the PT executable(!) instead of writable. The guest gets stuck forever. In these conditions, the permission fault must be considered as a write so that the Stage-1 update can take place. This is essentially the I-side equivalent of the problem fixed by 60e21a0e ("arm64: KVM: Take S1 walks into account when determining S2 write faults"). Update kvm_is_write_fault() to return true on IABT+S1PTW, and introduce kvm_vcpu_trap_is_exec_fault() that only return true when no faulting on a S1 fault. Additionally, kvm_vcpu_dabt_iss1tw() is renamed to kvm_vcpu_abt_iss1tw(), as the above makes it plain that it isn't specific to data abort. Signed-off-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Will Deacon <will@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200915104218.1284701-2-maz@kernel.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiri Slaby authored
commit e9f691d8 upstream. There are several reports that the BUG_ON on unsupported command in mv_qc_prep can be triggered under some circumstances: https://bugzilla.suse.com/show_bug.cgi?id=1110252 https://serverfault.com/questions/888897/raid-problems-after-power-outage https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1652185 https://bugs.centos.org/view.php?id=14998 Let sata_mv handle the failure gracefully: warn about that incl. the failed command number and return an AC_ERR_INVALID error. We can do that now thanks to the previous patch. Remove also the long-standing FIXME. [v2] use %.2x as commands are defined as hexa. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-ide@vger.kernel.org Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Jiri Slaby authored
commit 95364f36 upstream. In case a driver wants to return an error from qc_prep, return enum ata_completion_errors. sata_mv is one of those drivers -- see the next patch. Other drivers return the newly defined AC_ERR_OK. [v2] use enum ata_completion_errors and AC_ERR_OK. Signed-off-by:
-
Jiri Slaby authored
commit 25937580 upstream. Since we will return enum ata_completion_errors from qc_prep in the next patch, let's define AC_ERR_OK to mark the OK status. Signed-off-by:
-
Muchun Song authored
commit 10de795a upstream. Fix compiler warning(as show below) for !CONFIG_KPROBES_ON_FTRACE. kernel/kprobes.c: In function 'kill_kprobe': kernel/kprobes.c:1116:33: warning: statement with no effect [-Wunused-value] 1116 | #define disarm_kprobe_ftrace(p) (-ENODEV) | ^ kernel/kprobes.c:2154:3: note: in expansion of macro 'disarm_kprobe_ftrace' 2154 | disarm_kprobe_ftrace(p); Link: https://lore.kernel.org/r/20200805142136.0331f7ea@canb.auug.org.au Link: https://lkml.kernel.org/r/20200805172046.19066-1-songmuchun@bytedance.comReported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 0cb2f137 ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler") Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Acked-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Muchun Song <songmuchun@bytedance.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Christian Borntraeger authored
commit f7e80983 upstream. reqcnt is an u32 pointer but we do copy sizeof(reqcnt) which is the size of the pointer. This means we only copy 8 byte. Let us copy the full monty. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: stable@vger.kernel.org Fixes: af4a7227 ("s390/zcrypt: Support up to 256 crypto adapters.") Reviewed-by:
Harald Freudenberger <freude@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Gao Xiang authored
commit 41663430 upstream. SWP_FS is used to make swap_{read,write}page() go through the filesystem, and it's only used for swap files over NFS. So, !SWP_FS means non NFS for now, it could be either file backed or device backed. Something similar goes with legacy SWP_FILE. So in order to achieve the goal of the original patch, SWP_BLKDEV should be used instead. FS corruption can be observed with SSD device + XFS + fragmented swapfile due to CONFIG_THP_SWAP=y. I reproduced the issue with the following details: Environment: QEMU + upstream kernel + buildroot + NVMe (2 GB) Kernel config: CONFIG_BLK_DEV_NVME=y CONFIG_THP_SWAP=y Some reproducible steps: mkfs.xfs -f /dev/nvme0n1 mkdir /tmp/mnt mount /dev/nvme0n1 /tmp/mnt bs="32k" sz="1024m" # doesn't matter too much, I also tried 16m xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw xfs_io -f -c "pwrite -F -S 0 -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fsync" /tmp/mnt/sw mkswap /tmp/mnt/sw swapon /tmp/mnt/sw stress --vm 2 --vm-bytes 600M # doesn't matter too much as well Symptoms: - FS corruption (e.g. checksum failure) - memory corruption at: 0xd2808010 - segfault Fixes: f0eea189 ("mm, THP, swap: Don't allocate huge cluster for file backed swap device") Fixes: 38d8b4e6 ("mm, THP, swap: delay splitting THP during swap out") Signed-off-by:
Gao Xiang <hsiangkao@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
"Huang, Ying" <ying.huang@intel.com> Reviewed-by:
Yang Shi <shy828301@gmail.com> Acked-by:
Rafael Aquini <aquini@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Eric Sandeen <esandeen@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200820045323.7809-1-hsiangkao@redhat.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Masami Hiramatsu authored
commit 3031313e upstream. Commit 0cb2f137 ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler") fixed one bug but not completely fixed yet. If we run a kprobe_module.tc of ftracetest, kernel showed a warning as below. # ./ftracetest test.d/kprobe/kprobe_module.tc === Ftrace unit tests === [1] Kprobe dynamic event - probing module ... [ 22.400215] ------------[ cut here ]------------ [ 22.400962] Failed to disarm kprobe-ftrace at trace_printk_irq_work+0x0/0x7e [trace_printk] (-2) [ 22.402139] WARNING: CPU: 7 PID: 200 at kernel/kprobes.c:1091 __disarm_kprobe_ftrace.isra.0+0x7e/0xa0 [ 22.403358] Modules linked in: trace_printk(-) [ 22.404028] CPU: 7 PID: 200 Comm: rmmod Not tainted 5.9.0-rc2+ #66 [ 22.404870] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 22.406139] RIP: 0010:__disarm_kprobe_ftrace.isra.0+0x7e/0xa0 [ 22.406947] Code: 30 8b 03 eb c9 80 3d e5 09 1f 01 00 75 dc 49 8b 34 24 89 c2 48 c7 c7 a0 c2 05 82 89 45 e4 c6 05 cc 09 1f 01 01 e8 a9 c7 f0 ff <0f> 0b 8b 45 e4 eb b9 89 c6 48 c7 c7 70 c2 05 82 89 45 e4 e8 91 c7 [ 22.409544] RSP: 0018:ffffc90000237df0 EFLAGS: 00010286 [ 22.410385] RAX: 0000000000000000 RBX: ffffffff83066024 RCX: 0000000000000000 [ 22.411434] RDX: 0000000000000001 RSI: ffffffff810de8d3 RDI: ffffffff810de8d3 [ 22.412687] RBP: ffffc90000237e10 R08: 0000000000000001 R09: 0000000000000001 [ 22.413762] R10: 0000000000000000 R11: 0000000000000001 R12: ffff88807c478640 [ 22.414852] R13: ffffffff8235ebc0 R14: ffffffffa00060c0 R15: 0000000000000000 [ 22.415941] FS: 00000000019d48c0(0000) GS:ffff88807d7c0000(0000) knlGS:0000000000000000 [ 22.417264] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 22.418176] CR2: 00000000005bb7e3 CR3: 0000000078f7a000 CR4: 00000000000006a0 [ 22.419309] Call Trace: [ 22.419990] kill_kprobe+0x94/0x160 [ 22.420652] kprobes_module_callback+0x64/0x230 [ 22.421470] notifier_call_chain+0x4f/0x70 [ 22.422184] blocking_notifier_call_chain+0x49/0x70 [ 22.422979] __x64_sys_delete_module+0x1ac/0x240 [ 22.423733] do_syscall_64+0x38/0x50 [ 22.424366] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 22.425176] RIP: 0033:0x4bb81d [ 22.425741] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e0 ff ff ff f7 d8 64 89 01 48 [ 22.428726] RSP: 002b:00007ffc70fef008 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 [ 22.430169] RAX: ffffffffffffffda RBX: 00000000019d48a0 RCX: 00000000004bb81d [ 22.431375] RDX: 0000000000000000 RSI: 0000000000000880 RDI: 00007ffc70fef028 [ 22.432543] RBP: 0000000000000880 R08: 00000000ffffffff R09: 00007ffc70fef320 [ 22.433692] R10: 0000000000656300 R11: 0000000000000246 R12: 00007ffc70fef028 [ 22.434635] R13: 0000000000000000 R14: 0000000000000002 R15: 0000000000000000 [ 22.435682] irq event stamp: 1169 [ 22.436240] hardirqs last enabled at (1179): [<ffffffff810df542>] console_unlock+0x422/0x580 [ 22.437466] hardirqs last disabled at (1188): [<ffffffff810df19b>] console_unlock+0x7b/0x580 [ 22.438608] softirqs last enabled at (866): [<ffffffff81c0038e>] __do_softirq+0x38e/0x490 [ 22.439637] softirqs last disabled at (859): [<ffffffff81a00f42>] asm_call_on_stack+0x12/0x20 [ 22.440690] ---[ end trace 1e7ce7e1e4567276 ]--- [ 22.472832] trace_kprobe: This probe might be able to register after target module is loaded. Continue. This is because the kill_kprobe() calls disarm_kprobe_ftrace() even if the given probe is not enabled. In that case, ftrace_set_filter_ip() fails because the given probe point is not registered to ftrace. Fix to check the given (going) probe is enabled before invoking disarm_kprobe_ftrace(). Link: https://lkml.kernel.org/r/159888672694.1411785.5987998076694782591.stgit@devnote2 Fixes: 0cb2f137 ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler") Cc: Ingo Molnar <mingo@kernel.org> Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David Miller <davem@davemloft.net> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Chengming Zhou <zhouchengming@bytedance.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Jan Höppner authored
commit 709192d5 upstream. A discard request that writes zeros using the global kernel internal ZERO_PAGE will fail for machines with more than 2GB of memory due to the location of the ZERO_PAGE. Fix this by using a driver owned global zero page allocated with GFP_DMA flag set. Fixes: 28b841b3 ("s390/dasd: Add discard support for FBA devices") Signed-off-by:
Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by:
Stefan Haberland <sth@linux.ibm.com> Cc: <stable@vger.kernel.org> # 4.14+ Signed-off-by:
-
Tom Rix authored
commit 46bbe5c6 upstream. clang static analyzer reports this problem trace_events_hist.c:3824:3: warning: Attempt to free released memory kfree(hist_data->attrs->var_defs.name[i]); In parse_var_defs() if there is a problem allocating var_defs.expr, the earlier var_defs.name is freed. This free is duplicated by free_var_defs() which frees the rest of the list. Because free_var_defs() has to run anyway, remove the second free fom parse_var_defs(). Link: https://lkml.kernel.org/r/20200907135845.15804-1-trix@redhat.com Cc: stable@vger.kernel.org Fixes: 30350d65 ("tracing: Add variable support to hist triggers") Reviewed-by:
Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
Tom Lendacky authored
[ Upstream commit 4bb05f30 ] The INVD instruction intercept performs emulation. Emulation can't be done on an SEV guest because the guest memory is encrypted. Provide a dedicated intercept routine for the INVD intercept. And since the instruction is emulated as a NOP, just skip it instead. Fixes: 1654efcb ("KVM: SVM: Add KVM_SEV_INIT command") Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Message-Id: <a0b9a19ffa7fef86a3cc700c7ea01cb2731e04e5.1600972918.git.thomas.lendacky@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sean Christopherson authored
[ Upstream commit 8d214c48 ] Reset the MMU context during kvm_set_cr4() if SMAP or PKE is toggled. Recent commits to (correctly) not reload PDPTRs when SMAP/PKE are toggled inadvertantly skipped the MMU context reset due to the mask of bits that triggers PDPTR loads also being used to trigger MMU context resets. Fixes: 427890af ("kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode") Fixes: cb957adb ("kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode") Cc: Jim Mattson <jmattson@google.com> Cc: Peter Shier <pshier@google.com> Cc: Oliver Upton <oupton@google.com> Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200923215352.17756-1-sean.j.christopherson@intel.com> Signed-off-by:
-
Wei Li authored
[ Upstream commit e393fbe6 ] Commit 442e14a2 ("MIPS: Add 1074K CPU support explicitly.") split 1074K from the 74K as an unique CPU type, while it missed to add the 'CPU_1074K' in __get_cpu_type(). So let's add it back. Fixes: 442e14a2 ("MIPS: Add 1074K CPU support explicitly.") Signed-off-by:
Wei Li <liwei391@huawei.com> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Dmitry Baryshkov authored
[ Upstream commit 40033248 ] Non-incrementing reads can fail if register + length crosses page border. However for non-incrementing reads we should not check for page border crossing. Fix this by passing additional flag to _regmap_raw_read and passing length to _regmap_select_page basing on the flag. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 74fe7b55 ("regmap: Add regmap_noinc_read API") Link: https://lore.kernel.org/r/20200917153405.3139200-1-dmitry.baryshkov@linaro.orgSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Tom Rix authored
[ Upstream commit 472eb391 ] clang static analysis flags this problem hpioctl.c:513:7: warning: Branch condition evaluates to a garbage value if (pci.ap_mem_base[idx]) { ^~~~~~~~~~~~~~~~~~~~ If there is a failure in the middle of the memory space loop, only some of the memory spaces need to be cleaned up. At the error handler, idx holds the number of successful memory spaces mapped. So rework the handler loop to use the old idx. There is a second problem, the memory space loop conditionally iomaps()/sets the mem_base so it is necessay to initize pci. Fixes: 719f82d3 ("ALSA: Add support of AudioScience ASI boards") Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Yonghong Song authored
[ Upstream commit ce880cb8 ] Running selftest ./btf_btf -p the kernel had the following warning: [ 51.528185] WARNING: CPU: 3 PID: 1756 at kernel/bpf/hashtab.c:717 htab_map_get_next_key+0x2eb/0x300 [ 51.529217] Modules linked in: [ 51.529583] CPU: 3 PID: 1756 Comm: test_btf Not tainted 5.9.0-rc1+ #878 [ 51.530346] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.el7.centos 04/01/2014 [ 51.531410] RIP: 0010:htab_map_get_next_key+0x2eb/0x300 ... [ 51.542826] Call Trace: [ 51.543119] map_seq_next+0x53/0x80 [ 51.543528] seq_read+0x263/0x400 [ 51.543932] vfs_read+0xad/0x1c0 [ 51.544311] ksys_read+0x5f/0xe0 [ 51.544689] do_syscall_64+0x33/0x40 [ 51.545116] entry_SYSCALL_64_after_hwframe+0x44/0xa9 The related source code in kernel/bpf/hashtab.c: 709 static int htab_map_get_next_key(struct bpf_map *map, void *key, void *next_key) 710 { 711 struct bpf_htab *htab = container_of(map, struct bpf_htab, map); 712 struct hlist_nulls_head *head; 713 struct htab_elem *l, *next_l; 714 u32 hash, key_size; 715 int i = 0; 716 717 WARN_ON_ONCE(!rcu_read_lock_held()); In kernel/bpf/inode.c, bpffs map pretty print calls map->ops->map_get_next_key() without holding a rcu_read_lock(), hence causing the above warning. To fix the issue, just surrounding map->ops->map_get_next_key() with rcu read lock. Fixes: a26ca7c9 ("bpf: btf: Add pretty print support to the basic arraymap") Reported-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Cc: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200916004401.146277-1-yhs@fb.comSigned-off-by:
-
Linus Lüssing authored
[ Upstream commit 2369e827 ] Scenario: * Multicast frame send from BLA backbone gateways (multiple nodes with their bat0 bridged together, with BLA enabled) sharing the same LAN to nodes in the mesh Issue: * Nodes receive the frame multiple times on bat0 from the mesh, once from each foreign BLA backbone gateway which shares the same LAN with another For multicast frames via batman-adv broadcast packets coming from the same BLA backbone but from different backbone gateways duplicates are currently detected via a CRC history of previously received packets. However this CRC so far was not performed for multicast frames received via batman-adv unicast packets. Fixing this by appyling the same check for such packets, too. Room for improvements in the future: Ideally we would introduce the possibility to not only claim a client, but a complete originator, too. This would allow us to only send a multicast-in-unicast packet from a BLA backbone gateway claiming the node and by that avoid potential redundant transmissions in the first place. Fixes: 279e89b2 ("batman-adv: add broadcast duplicate check") Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Linus Lüssing authored
[ Upstream commit 74c09b72 ] Scenario: * Multicast frame send from mesh to a BLA backbone (multiple nodes with their bat0 bridged together, with BLA enabled) Issue: * BLA backbone nodes receive the frame multiple times on bat0, once from mesh->bat0 and once from each backbone_gw from LAN For unicast, a node will send only to the best backbone gateway according to the TQ. However for multicast we currently cannot determine if multiple destination nodes share the same backbone if they don't share the same backbone with us. So we need to keep sending the unicasts to all backbone gateways and let the backbone gateways decide which one will forward the frame. We can use the CLAIM mechanism to make this decision. One catch: The batman-adv gateway feature for DHCP packets potentially sends multicast packets in the same batman-adv unicast header as the multicast optimizations code. And we are not allowed to drop those even if we did not claim the source address of the sender, as for such packets there is only this one multicast-in-unicast packet. How can we distinguish the two cases? The gateway feature uses a batman-adv unicast 4 address header. While the multicast-to-unicasts feature uses a simple, 3 address batman-adv unicast header. So let's use this to distinguish. Fixes: fe2da6ff ("batman-adv: check incoming packet type for bla") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 4bba9dab ] The fix for receiving (internally generated) bla packets outside the interrupt context introduced the usage of in_interrupt(). But this functionality is only defined in linux/preempt.h which was not included with the same patch. Fixes: 279e89b2 ("batman-adv: bla: use netif_rx_ni when not in interrupt context") Signed-off-by:
-
Martin Cerveny authored
[ Upstream commit cab4c03b ] "Allwinner V3s" has secondary video layer (VI). Decoded video is displayed in wrong colors until secondary CSC registers are programmed correctly. Fixes: 88302939 ("drm/sun4i: Add DE2 CSC library") Signed-off-by:
Martin Cerveny <m.cerveny@computer.org> Reviewed-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200906162140.5584-2-m.cerveny@computer.orgSigned-off-by:
-
Dmitry Bogdanov authored
[ Upstream commit ce1cf9e5 ] Fix the assert during VF driver installation when the personality is iWARP Fixes: 1fe614d1 ("qed: Relax VF firmware requirements") Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit ec653df2 ] card->owner is a required property and since commit 81033c6b ("ALSA: core: Warn on empty module") a warning is issued if it is empty. Fix lack of it. This fixes following warning observed on RaspberryPi 3B board with ARM 32bit kernel and multi_v7_defconfig: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 210 at sound/core/init.c:207 snd_card_new+0x378/0x398 [snd] Modules linked in: vc4(+) snd_soc_core ac97_bus snd_pcm_dmaengine bluetooth snd_pcm snd_timer crc32_arm_ce raspberrypi_hwmon snd soundcore ecdh_generic ecc bcm2835_thermal phy_generic CPU: 1 PID: 210 Comm: systemd-udevd Not tainted 5.8.0-rc1-00027-g81033c6b #1087 Hardware name: BCM2835 [<c03113c0>] (unwind_backtrace) from [<c030bcb4>] (show_stack+0x10/0x14) [<c030bcb4>] (show_stack) from [<c071cef8>] (dump_stack+0xd4/0xe8) [<c071cef8>] (dump_stack) from [<c0345bfc>] (__warn+0xdc/0xf4) [<c0345bfc>] (__warn) from [<c0345cc4>] (warn_slowpath_fmt+0xb0/0xb8) [<c0345cc4>] (warn_slowpath_fmt) from [<bf02ff74>] (snd_card_new+0x378/0x398 [snd]) [<bf02ff74>] (snd_card_new [snd]) from [<bf11f0b4>] (snd_soc_bind_card+0x280/0x99c [snd_soc_core]) [<bf11f0b4>] (snd_soc_bind_card [snd_soc_core]) from [<bf12f000>] (devm_snd_soc_register_card+0x34/0x6c [snd_soc_core]) [<bf12f000>] (devm_snd_soc_register_card [snd_soc_core]) from [<bf165654>] (vc4_hdmi_bind+0x43c/0x5f4 [vc4]) [<bf165654>] (vc4_hdmi_bind [vc4]) from [<c09d660c>] (component_bind_all+0xec/0x24c) [<c09d660c>] (component_bind_all) from [<bf15c44c>] (vc4_drm_bind+0xd4/0x174 [vc4]) [<bf15c44c>] (vc4_drm_bind [vc4]) from [<c09d6ac0>] (try_to_bring_up_master+0x160/0x1b0) [<c09d6ac0>] (try_to_bring_up_master) from [<c09d6f38>] (component_master_add_with_match+0xd0/0x104) [<c09d6f38>] (component_master_add_with_match) from [<bf15c588>] (vc4_platform_drm_probe+0x9c/0xbc [vc4]) [<bf15c588>] (vc4_platform_drm_probe [vc4]) from [<c09df740>] (platform_drv_probe+0x6c/0xa4) [<c09df740>] (platform_drv_probe) from [<c09dd6f0>] (really_probe+0x210/0x350) [<c09dd6f0>] (really_probe) from [<c09dd940>] (driver_probe_device+0x5c/0xb4) [<c09dd940>] (driver_probe_device) from [<c09ddb38>] (device_driver_attach+0x58/0x60) [<c09ddb38>] (device_driver_attach) from [<c09ddbc0>] (__driver_attach+0x80/0xbc) [<c09ddbc0>] (__driver_attach) from [<c09db820>] (bus_for_each_dev+0x68/0xb4) [<c09db820>] (bus_for_each_dev) from [<c09dc9f8>] (bus_add_driver+0x130/0x1e8) [<c09dc9f8>] (bus_add_driver) from [<c09de648>] (driver_register+0x78/0x110) [<c09de648>] (driver_register) from [<c0302038>] (do_one_initcall+0x50/0x220) [<c0302038>] (do_one_initcall) from [<c03db544>] (do_init_module+0x60/0x210) [<c03db544>] (do_init_module) from [<c03da4f8>] (load_module+0x1e34/0x2338) [<c03da4f8>] (load_module) from [<c03dac00>] (sys_finit_module+0xac/0xbc) [<c03dac00>] (sys_finit_module) from [<c03000c0>] (ret_fast_syscall+0x0/0x54) Exception stack(0xeded9fa8 to 0xeded9ff0) ... ---[ end trace 6414689569c2bc08 ]--- Fixes: bb7d7856 ("drm/vc4: Add HDMI audio support") Suggested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit e6a18d36 ] Bryce reported that he saw the following with: 0: r6 = r1 1: r1 = 12 2: r0 = *(u16 *)skb[r1] The xlated sequence was incorrectly clobbering r2 with pointer value of r6 ... 0: (bf) r6 = r1 1: (b7) r1 = 12 2: (bf) r1 = r6 3: (bf) r2 = r1 4: (85) call bpf_skb_load_helper_16_no_cache#7692160 ... and hence call to the load helper never succeeded given the offset was too high. Fix it by reordering the load of r6 to r1. Other than that the insn has similar calling convention than BPF helpers, that is, r0 - r5 are scratch regs, so nothing else affected after the insn. Fixes: e0cea7ce ("bpf: implement ld_abs/ld_ind in native bpf") Reported-by:
Bryce Kahle <bryce.kahle@datadoghq.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 0ff4628f ] syzbot reported a bug in ieee802154_tx() [1] A similar issue in ieee802154_xmit_worker() is also fixed in this patch. [1] BUG: KASAN: use-after-free in ieee802154_tx+0x3d2/0x480 net/mac802154/tx.c:88 Read of size 4 at addr ffff8880251a8c70 by task syz-executor.3/928 CPU: 0 PID: 928 Comm: syz-executor.3 Not tainted 5.9.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 ieee802154_tx+0x3d2/0x480 net/mac802154/tx.c:88 ieee802154_subif_start_xmit+0xbe/0xe4 net/mac802154/tx.c:130 __netdev_start_xmit include/linux/netdevice.h:4634 [inline] netdev_start_xmit include/linux/netdevice.h:4648 [inline] dev_direct_xmit+0x4e9/0x6e0 net/core/dev.c:4203 packet_snd net/packet/af_packet.c:2989 [inline] packet_sendmsg+0x2413/0x5290 net/packet/af_packet.c:3014 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:671 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2353 ___sys_sendmsg+0xf3/0x170 net/socket.c:2407 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2440 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45d5b9 Code: 5d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc98e749c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000002ccc0 RCX: 000000000045d5b9 RDX: 0000000000000000 RSI: 0000000020007780 RDI: 000000000000000b RBP: 000000000118d020 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118cfec R13: 00007fff690c720f R14: 00007fc98e74a9c0 R15: 000000000118cfec Allocated by task 928: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:461 slab_post_alloc_hook mm/slab.h:518 [inline] slab_alloc_node mm/slab.c:3254 [inline] kmem_cache_alloc_node+0x136/0x3e0 mm/slab.c:3574 __alloc_skb+0x71/0x550 net/core/skbuff.c:198 alloc_skb include/linux/skbuff.h:1094 [inline] alloc_skb_with_frags+0x92/0x570 net/core/skbuff.c:5771 sock_alloc_send_pskb+0x72a/0x880 net/core/sock.c:2348 packet_alloc_skb net/packet/af_packet.c:2837 [inline] packet_snd net/packet/af_packet.c:2932 [inline] packet_sendmsg+0x19fb/0x5290 net/packet/af_packet.c:3014 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:671 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2353 ___sys_sendmsg+0xf3/0x170 net/socket.c:2407 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2440 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 928: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xd8/0x120 mm/kasan/common.c:422 __cache_free mm/slab.c:3418 [inline] kmem_cache_free.part.0+0x74/0x1e0 mm/slab.c:3693 kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:622 __kfree_skb net/core/skbuff.c:679 [inline] consume_skb net/core/skbuff.c:838 [inline] consume_skb+0xcf/0x160 net/core/skbuff.c:832 __dev_kfree_skb_any+0x9c/0xc0 net/core/dev.c:3107 fakelb_hw_xmit+0x20e/0x2a0 drivers/net/ieee802154/fakelb.c:81 drv_xmit_async net/mac802154/driver-ops.h:16 [inline] ieee802154_tx+0x282/0x480 net/mac802154/tx.c:81 ieee802154_subif_start_xmit+0xbe/0xe4 net/mac802154/tx.c:130 __netdev_start_xmit include/linux/netdevice.h:4634 [inline] netdev_start_xmit include/linux/netdevice.h:4648 [inline] dev_direct_xmit+0x4e9/0x6e0 net/core/dev.c:4203 packet_snd net/packet/af_packet.c:2989 [inline] packet_sendmsg+0x2413/0x5290 net/packet/af_packet.c:3014 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:671 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2353 ___sys_sendmsg+0xf3/0x170 net/socket.c:2407 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2440 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff8880251a8c00 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 112 bytes inside of 224-byte region [ffff8880251a8c00, ffff8880251a8ce0) The buggy address belongs to the page: page:0000000062b6a4f1 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x251a8 flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0000435c88 ffffea00028b6c08 ffff8880a9055d00 raw: 0000000000000000 ffff8880251a80c0 000000010000000c 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880251a8b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880251a8b80: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc >ffff8880251a8c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880251a8c80: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff8880251a8d00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb Fixes: 409c3b0c ("mac802154: tx: move stats tx increment") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Alexander Aring <alex.aring@gmail.com> Cc: Stefan Schmidt <stefan@datenfreihafen.org> Cc: linux-wpan@vger.kernel.org Link: https://lore.kernel.org/r/20200908104025.4009085-1-edumazet@google.comSigned-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Linus Lüssing authored
[ Upstream commit 7dda5b33 ] The unicast packet rerouting code makes several assumptions. For instance it assumes that there is always exactly one destination in the TT. This breaks for multicast frames in a unicast packets in several ways: For one thing if there is actually no TT entry and the destination node was selected due to the multicast tvlv flags it announced. Then an intermediate node will wrongly drop the packet. For another thing if there is a TT entry but the TTVN of this entry is newer than the originally addressed destination node: Then the intermediate node will wrongly redirect the packet, leading to duplicated multicast packets at a multicast listener and missing packets at other multicast listeners or multicast routers. Fixing this by not applying the unicast packet rerouting to batman-adv unicast packets with a multicast payload. We are not able to detect a roaming multicast listener at the moment and will just continue to send the multicast frame to both the new and old destination for a while in case of such a roaming multicast listener. Fixes: a73105b8 ("batman-adv: improved client announcement mechanism") Signed-off-by:
-
Jing Xiangfeng authored
[ Upstream commit c2b94787 ] eni_init_one() misses to call pci_disable_device() in an error path. Jump to err_disable to fix it. Fixes: ede58ef2 ("atm: remove deprecated use of pci api") Signed-off-by:
Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Linus Lüssing authored
[ Upstream commit 097930e8 ] It seems that due to a copy & paste error the void pointer in batadv_choose_backbone_gw() is cast to the wrong type. Fixing this by using "struct batadv_bla_backbone_gw" instead of "struct batadv_bla_claim" which better matches the caller's side. For now it seems that we were lucky because the two structs both have their orig/vid and addr/vid in the beginning. However I stumbled over this issue when I was trying to add some debug variables in front of "orig" in batadv_backbone_gw, which caused hash lookups to fail. Fixes: 07568d03 ("batman-adv: don't rely on positions in struct for hashing") Signed-off-by:
Linus Lüssing <ll@simonwunderlich.de> Signed-off-by:
-
Maximilian Luz authored
[ Upstream commit 4afc850e ] Following commit e1869678 ("mwifiex: Prevent memory corruption handling keys") the mwifiex driver fails to authenticate with certain networks, specifically networks with 256 bit keys, and repeatedly asks for the password. The kernel log repeats the following lines (id and bssid redacted): mwifiex_pcie 0000:01:00.0: info: trying to associate to '<id>' bssid <bssid> mwifiex_pcie 0000:01:00.0: info: associated to bssid <bssid> successfully mwifiex_pcie 0000:01:00.0: crypto keys added mwifiex_pcie 0000:01:00.0: info: successfully disconnected from <bssid>: reason code 3 Tracking down this problem lead to the overflow check introduced by the aforementioned commit into mwifiex_ret_802_11_key_material_v2(). This check fails on networks with 256 bit keys due to the current storage size for AES keys in struct mwifiex_aes_param being only 128 bit. To fix this issue, increase the storage size for AES keys to 256 bit. Fixes: e1869678 ("mwifiex: Prevent memory corruption handling keys") Signed-off-by:
Maximilian Luz <luzmaximilian@gmail.com> Reported-by:
Kaloyan Nikolov <konik98@gmail.com> Tested-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Brian Norris <briannorris@chromium.org> Tested-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200825153829.38043-1-luzmaximilian@gmail.comSigned-off-by:
-
Tianjia Zhang authored
[ Upstream commit 400d033f ] In the init function, if the call to of_iomap() fails, the return value is ENXIO instead of -ENXIO. Change to the right negative errno. Fixes: 691f8f87 ("clocksource/drivers/h8300_timer8: Convert init function to return error") Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200802111541.5429-1-tianjia.zhang@linux.alibaba.comSigned-off-by:
-
Tom Rix authored
[ Upstream commit e3914ed6 ] Clang static analysis reports this error adf7242.c:887:6: warning: Assigned value is garbage or undefined len = len_u8; ^ ~~~~~~ len_u8 is set in adf7242_read_reg(lp, 0, &len_u8); When this call fails, len_u8 is not set. So check the return code. Fixes: 7302b9d9 ("ieee802154/adf7242: Driver for ADF7242 MAC IEEE802154") Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20200802142339.21091-1-trix@redhat.comSigned-off-by:
-
Liu Jian authored
[ Upstream commit 88f46b3f ] We should call destroy_workqueue to destroy mlme_workqueue in error branch. Fixes: ded845a7 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by:
Liu Jian <liujian56@huawei.com> Link: https://lore.kernel.org/r/20200720143315.40523-1-liujian56@huawei.comSigned-off-by:
-
Josh Poimboeuf authored
[ Upstream commit db6c6a0d ] When a function is annotated with STACK_FRAME_NON_STANDARD, objtool doesn't validate its code paths. It also skips sibling call detection within the function. But sibling call detection is actually needed for the case where the ignored function doesn't have any return instructions. Otherwise objtool naively marks the function as implicit static noreturn, which affects the reachability of its callers, resulting in "unreachable instruction" warnings. Fix it by just enabling sibling call detection for ignored functions. The 'insn->ignore' check in add_jump_destinations() is no longer needed after e6da9567 ("objtool: Don't use ignore flag for fake jumps"). Fixes the following warning: arch/x86/kvm/vmx/vmx.o: warning: objtool: vmx_handle_exit_irqoff()+0x142: unreachable instruction which triggers on an allmodconfig with CONFIG_GCOV_KERNEL unset. Reported-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
-
Hans de Goede authored
[ Upstream commit 21653a41 ] Some ACPI i2c-devices _STA method (which is used to detect if the device is present) use autodetection code which probes which device is present over i2c. This requires the I2C ACPI OpRegion handler to be registered before we enumerate i2c-clients under the i2c-adapter. This fixes the i2c touchpad on the Lenovo ThinkBook 14-IIL and ThinkBook 15 IIL not getting an i2c-client instantiated and thus not working. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1842039Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Dennis Li authored
[ Upstream commit 087d7641 ] In the resume stage of GPU recovery, start_cpsch will call pm_init which set pm->allocated as false, cause the next pm_release_ib has no chance to release ib memory. Add pm_release_ib in stop_cpsch which will be called in the suspend stage of GPU recovery. Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
Dennis Li <Dennis.Li@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Sven Schnelle authored
[ Upstream commit 73ac74c7 ] Switch order so that locking state is consistent even if the IRQ tracer calls into lockdep again. Acked-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Sven Schnelle <svens@linux.ibm.com> Signed-off-by:
-
Ilya Leoshkevich authored
[ Upstream commit fcb2b70c ] Add __init to reserve_memory_end, reserve_oldmem and remove_oldmem. Sometimes these functions are not inlined, and then the build complains about section mismatch. Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
-
Palmer Dabbelt authored
[ Upstream commit 66d18dbd ] Without this we get lockdep failures. They're spurious failures as SMP isn't up when ftrace_init_nop() is called. As far as I can tell the easiest fix is to just take the lock, which also seems like the safest fix. Signed-off-by:
Palmer Dabbelt <palmerdabbelt@google.com> Acked-by:
Guo Ren <guoren@kernel.org> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 6a013710 ] The MPMAN Converter9 2-in-1 almost fully works with out default settings. The only problem is that it has only 1 speaker so any sounds only playing on the right channel get lost. Add a quirk for this model using the default settings + MONO_SPEAKER. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200901080623.4987-1-hdegoede@redhat.comSigned-off-by:
-
Sylwester Nawrocki authored
[ Upstream commit f5a2cda4 ] When the wm8958_mic_detect, wm8994_mic_detect functions get called from the machine driver, e.g. from the card's late_probe() callback, the CODEC device may be PM runtime suspended and any regmap writes have no effect. Add PM runtime calls to these functions to ensure the device registers are updated as expected. This suppresses an error during boot "wm8994-codec: ASoC: error at snd_soc_component_update_bits on wm8994-codec" caused by the regmap access error due to the cache_only flag being set. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200827173357.31891-2-s.nawrocki@samsung.comSigned-off-by:
-
Sylwester Nawrocki authored
[ Upstream commit 811c5494 ] The WM8994_MICBIAS register is not available in the WM1811 CODEC so skip initialization of that register for that device. This suppresses an error during boot: "wm8994-codec: ASoC: error at snd_soc_component_update_bits on wm8994-codec" Signed-off-by:
-
