- 02 Nov, 2004 40 commits
-
-
Matthew Wilcox authored
Revamp exceptions support to use fixup sections Committed-by:Randolph Chung <tausq@parisc-linux.org>
-
bk://bk.arm.linux.org.uk/linux-2.6-serialLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Russell King authored
- linux/8250.h is replaced by linux/serial_8250.h - we now pass serial port information via a platform device.
-
Russell King authored
-
Russell King authored
-
Russell King authored
-
bk://bk.arm.linux.org.uk/linux-2.6-rmkLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Ben Dooks authored
Patch from Ben Dooks Fixes mis-labelled timer variables, and incldes the clock header to allow the code to compile. This was not caught on previous rounds as all the s3c2440 machine support is pending the finalisation of the new s3c2440 uart driver (arriving soon) Signed-off-by: Ben Dooks
-
Ben Dooks authored
Patch from Ben Dooks Select the PCLK based TIMER4 to provide the system timer tick if there is no machine specific timer setup specified. This should make it easier to add new machines, as well as cut down on the code required in time.c when they are added. Signed-off-by: Ben Dooks
-
George G. Davis authored
Patch from George G. Davis The Lubbock PCMCIA socket driver, drivers/pcmcia/pxa2xx_lubbock.c, lacks a MODULE_LICENSE declaration. This patch merely adds the missing MODULE_LICENSE declaration to eliminate tainted kernel warnings when this driver is built as a module. I have intentionally not used the Dual MPL/GPL license in this case because 1) current linux-2.6.10-rc1 PXA PCMCIA drivers use only the GPL license, 2) the original source files on which the PXA PCMCIA drivers are based, i.e. the SA11xx PCMCIA drivers, state: "If you wish to allow the use of your version of this file only under the terms of the GPL and not to allow others to use your version of this file under the MPL, indicate your decision by deleting the provisions above and replace them with the notice and other provisions required by the GPL." Signed-off-by:: George G. Davis
-
Nicolas Pitre authored
Patch from Nicolas Pitre This allows to set the default state of GPIOs before they're enabled as output, eliminating spurious level transitions. Signed-off-by: Nicolas Pitre
-
Colin Leroy authored
Here's the patch that supercedes the one I asked you to drop. It changes the fan speed logic so that the fans will go incrementally fast instead of using just two steps. Also, it starts and stops both fans instead of just one on Powerbooks 15" and 17" (functionality asked by most of the Albooks users on Debian's ML, and justified by the fact that fan 1 and fan 2 do not correspond to CPU and GPU, as we previously thought). Signed-off-by:
Colin Leroy <colin@colino.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Russell King authored
VIDEO_MODE_SECAM was incorrectly writing the contents of cached register 14 back to hardware register 8, rather than using cached register 8. Signed-off-by:
Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Jesse Barnes authored
This is a small patch to deviceiobook.tmpl to describe the new mmiowb routine a bit more completely. I've also updated it to provide pointers to drivers that do write flushing, use mmiowb, and use the readX_relaxed routines. Acked-by:
Grant Grundler <grundler@parisc-linux.org> Signed-off-by:
Jesse Barnes <jbarnes@sgi.com> Signed-off-by:
-
James Nelson authored
Cleanup and update to Documentation/floppy.txt. Fix one incorrect option in listing. Signed-off-by:
James Nelson <james4765@gmail.com> Signed-off-by:
-
James Nelson authored
Update status of Computone Intelliport driver in MAINTAINERS. Signed-off-by:
-
James Nelson authored
Minor cleanup and status update to Documentation/computone.txt. Signed-off-by:
-
James Nelson authored
Update status of digiecpa driver in MAINTAINERS. Signed-off-by:
-
James Nelson authored
Update status of digiecpa driver & fix broken links in Documentation/digiecpa.txt. Signed-off-by:
-
James Nelson authored
Fix reference to digiboard maintenance status - the digiecpa driver obsoleted the original driver. Signed-off-by:
-
James Nelson authored
Remove reference to to-be-deleted file in Documentation/00-INDEX. Signed-off-by: <james4765@gmail.com> Signed-off-by:
-
James Nelson authored
Remove obsolete Documentation/digiboard.txt file - driver was obsoleted by the digiecpa driver. Signed-off-by:
-
Bjorn Helgaas authored
Cleanup/bugfix HPET driver: - hpet_init() could return failure with driver still registered with ACPI - driver add() functions were marked __init, but can be called any time until driver is unregistered (not a real problem until HPETs can be hotplugged) - time interpolator registration now done in driver add() path, so we can support removal of HPETs someday - physical MMIO address should be printed, not ioremapped address Signed-off-by:Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Miles Bader authored
Signed-off-by:
Miles Bader <miles@gnu.org> Signed-off-by:
-
Miles Bader authored
Signed-off-by:
-
Miles Bader authored
Signed-off-by:
-
Miles Bader authored
Signed-off-by:
-
Miles Bader authored
Signed-off-by:
-
Pekka Enberg authored
Use 8-bit palette entries for radeonfb and avoid zero-initialization as suggested by Geert Uytterhoeven. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
David Howells authored
The attached patch fixes a locking problem in key_lookup() and moves __key_check() out of line. Signed-Off-By:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Andrew Morton authored
- remove unused local - whitespace - put_bh() is faster than brelse() Signed-off-by:
-
Anton Altaparmakov authored
I renamed the functions to more descriptive names: create_buffers -> alloc_page_buffers __set_page_buffers -> attach_page_buffers And I added a EXPORT_SYMBOL_GPL for alloc_page_buffers and made attach_page_buffers static inline and moved it to <linux/buffer_head.h>. Signed-off-by:
Anton Altaparmakov <aia21@cantab.net> Signed-off-by:
-
Stephen Hemminger authored
Convert Ramdisk block device to module_param to get rid of warning. Add module alias to cause correct autoloading. Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
-
Stephen Hemminger authored
Convert loopback device to new module_param to get rid of warning. Signed-off-by:
-
Andreas Herrmann authored
Make zfcp compile again after the SPI-5 constants and the interface to suspend I/O to scsi devices got added. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Hirokazu Takata authored
Remove old relocation type definitions from include/asm-m32r/elf.h. These ELF relocations are obsolete and no longer used. * include/asm-m32r/elf.h: - Remove old relocation types. Signed-off-by:
Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
-
Hirokazu Takata authored
Remove rep_nop() from include/asm-m32r/processor.h, because REP NOP (PAUSE) is a x86 specific instuction. Instead of rep_nop(), barrier() should be used for cpu_relax() as well as other architecuture. * include/asm-m32r/processor.h: - Change not to include "cachectl.h". - Remove rep_nop() and redefine cpu_relax() as barrier(). * arch/m32r/kernel/smpboot.h: - Use cpu_relax() instead of rep_nop(). Signed-off-by:
-
Hirokazu Takata authored
This patch fixes ELF_CORE_COPY_REGS() macro in order to dump register information into "core" files correctly, because both parameters pr_reg and regs are passed as pointers to "elf_gregset_t" and "struct pt_regs", respectively. I've tested it by using a native m32r GNU debugger. Signed-off-by:
-
Andi Kleen authored
This patch readds the panic blinking that was in 2.4 to 2.6. This is useful to see when you're in X that the machine has paniced It addresses previously criticism. It should work now when the keyboard interrupt is off. It doesn't fully emulate the handler, but has a timeout for this case. Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Andi Kleen authored
Print the real error when initramfs gunzip failed. gunzip already sets up message correctly. Signed-off-by:
-
