- 10 Jun, 2015 1 commit
-
-
Johan Hedberg authored
When we notify user space of a new LTK or distribute an LTK to the remote peer the value passed should be the shortened version so that it's easy to compare values in various traces. The core spec also sets the requirements for the shortening/masking as: "The masking shall be done after generation and before being distributed, used or stored." Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
- 09 Jun, 2015 10 commits
-
-
Frederic Danis authored
Add vendor specific command to change controller device speed. Signed-off-by:
Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by:
-
Stefan Schmidt authored
neither ram nor register write return values have been checked here. Checking both now. Assign ret with 0 as all other assignments are inside if blocks and might not happen before we return ret. CID: 1230469 Signed-off-by:
Stefan Schmidt <stefan@osg.samsung.com> Acked-by:
Varka Bhadram <varkabhadram@gmail.com> Signed-off-by:
-
Prasanna Karthik authored
Fix for spaces prohibited around that '->' reported by checkpatch and space prohibited between function name and open parenthesis '(' Signed-off-by:Prasanna Karthik <mkarthi3@visteon.com> Signed-off-by:
-
Arron Wang authored
SCO/eSCO link is supported by BR/EDR controller, it is suitable to move them under BT_BREDR config option Signed-off-by:
Arron Wang <arron.wang@intel.com> Signed-off-by:
-
Arron Wang authored
The return value of l2cap_recv_acldata() and sco_recv_scodata() are not used, then change it to return void Signed-off-by:
-
Loic Poulain authored
Don't interfere with the user channel exclusive access. Signed-off-by:
Loic Poulain <loic.poulain@intel.com> Signed-off-by:
-
Stefan Schmidt authored
If we run into an error during rx we set the the error code in ret, but override it afterwards. Using a different variable for the extra case avoids this situation. CID: 1226982, 1226983 Signed-off-by:
-
Stefan Schmidt authored
This call was used before we aligned our code with the wireless code base. We are wanted to handle this in the err: code path. Which would actually not work because the WARN_ON() macro would reset the res value to 0 and thus we would never hit err:. Removing it makes the code do what we actually intend. Signed-off-by:
-
Marcel Holtmann authored
This patch fixes the command length alignment issue for Intel Bluetooth 8260. The length of parameters in the firmware downloading command must be multiplication of 4. If not, the command must append Intel_NOP command with extra parameters, zeros, at the end, and the firmware file is already included Intel_NOP command for alignment. This patch checks the next command and if the next command is Intel_NOP command, it reads the Intel_NOP command and send them together. For example, if the data from the firmware file looks like this: 8E FC 03 11 22 33 02 FC 03 00 00 00 Previously, btusb sends two commands: 09 FC 06 8E FC 03 11 22 33 09 FC 06 02 FC 03 00 00 00 This won't work because the length of parameters are 6 which violates the 4 byte alignment. This patch will append them together and send as one command: 09 FC 0C 8E FC 03 11 22 33 02 FC 03 00 00 00 Based on previous work from Tedd Ho-Jeong An <tedd.an@intel.com> Reported-by:
Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by:
-
Johan Hedberg authored
The encryption key size for LTKs is supposed to be applied only at the moment of encryption. When generating a Link Key (using LE SC) from the LTK the full non-shortened value should be used. This patch modifies the code to always keep the full value around and only apply the key size when passing the value to HCI. Signed-off-by:
-
- 08 Jun, 2015 5 commits
-
-
Aleksei Volkov authored
That patch corrects the typo in usb vendor id for Roper Class 1 Bluetooth Dongle. Problem with typo is present since 4.0 kernel. Content /sys/kernel/debug/usb/devices for these dongle: T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1310 ProdID=0001 Rev=15.00 S: Manufacturer=SiW S: Product=SiW S: SerialNumber=E7BB050D0B00 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 50mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Aleksei Volkov <info@dv2c.ru> Signed-off-by:
-
Marcel Holtmann authored
The btusb_read_local_version function has only a single user and with that just move its functionality in place where it belongs. Signed-off-by:
-
Marcel Holtmann authored
The __hci_cmd_sync function already handles the command status and command complete errors. No need to check the status field again. Signed-off-by:
-
Marcel Holtmann authored
The SKB returned from the Intel specific version information command is missing a kfree_skb. Signed-off-by:
-
Marcel Holtmann authored
During the initial setup stage of a controller, the low-level transport is actually active. This means that HCI_UP is true. To avoid toggling the transport off and back on again for normal operation the kernel holds a grace period with HCI_AUTO_OFF that will turn the low-level transport off in case no user is present. The idea of the grace period is important to avoid having to initialize all of the controller twice. So legacy ioctl and the new management interface knows how to clear this grace period and then start normal operation. For the user channel operation this grace period has not been taken into account which results in the problem that HCI_UP and HCI_AUTO_OFF are set and the kernel will return EBUSY. However from a system point of view the controller is ready to be grabbed by either the ioctl, the management interface or the user channel. This patch brings the user channel to the same level as the other two entries for operating a controller. Signed-off-by:
-
- 07 Jun, 2015 10 commits
-
-
Dmitry Tunin authored
BugLink: https://bugs.launchpad.net/bugs/1427680 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3474 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
-
Dmitry Tunin authored
BugLink: https://bugs.launchpad.net/bugs/1462614 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=06 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e076 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
-
Alexander Aring authored
To indicate if it's a coordinator or not a bool is enough. There should no more values available which represent some other state. Signed-off-by:
Alexander Aring <alex.aring@gmail.com> Reviewed-by:
-
Alexander Aring authored
This patch add missing comments to internal mac802154 structures. Signed-off-by:
-
Alexander Aring authored
This patch removes the priv attribute in ieee802154_hw to the right section which is commented by attributes which needs to be filled by driver layer. Signed-off-by:
-
Alexander Aring authored
This patch removed an attribute from ieee802154_hw structure which is never used inside kernel. Address information are stored inside wpan_dev nowadays. Signed-off-by:
-
Alexander Aring authored
This patch changes the ieee802154 hardware flags to enums and setting the flag values with the BIT macro. Additional this patch changes the commenting style for matching usual kernel style. Signed-off-by:
-
Alexander Aring authored
This patch removes the hardware auto acknowdledge flag which indicates that the transceiver supports this handling. This flag is never evaluated inside mac802154 and all transceivers should support this handling by default per hardware. Suggested-by:
Lennert Buytenhek <buytenh@wantstofly.org> Cc: Alan Ott <alan@signal11.us> Signed-off-by:
-
Alexander Aring authored
This patch changes the address filtering flags to enums and setting the flag values with the BIT macro. Additional this patch changes the commenting style for matching usual kernel style. Signed-off-by:
-
Alexander Aring authored
This patch removes the virtual interface structure from sub if data struct, because it isn't used anywhere. This structure could be useful for give per interface information at softmac driver layer. Nevertheless there exist no use case currently and it contains the interface type information currently. This information is also stored inside wpan dev which is now used to check on the wpan dev interface type. Signed-off-by:
-
- 06 Jun, 2015 7 commits
-
-
Loic Poulain authored
The hci close method needs to know if we are in user channel context. Only add the index to mgmt once close is performed. Signed-off-by:
-
Jaganath Kanakkassery authored
addr can be NULL and it should not be dereferenced before NULL checking. Signed-off-by:
Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by:
-
Frederic Danis authored
Use btbcm helpers to perform controller setup. Perform host UART reset to init speed between btbcm_patchram() and btbcm_finalize(). This may be need because firmware loading may have reseted controller UART to init speed. Signed-off-by:
-
Frederic Danis authored
Firmware loading may reset the controller UART speed and needs to set host UART speed back to init speed. UART drivers setup is split in 3 parts: - btbcm_initialize() resets the controller and returns the firmware name based on controller revision and sub_version. - btbtcm_patchram() (already existing and public), which takes the firmware name as parameter, requests the firmware and loads it to the controller. - btbcm_finalize() which resets the controller, reads local version and checks if the controller address is a default one or not. Remove firmware name retrieval for UART controllers from btbcm_setup_patchram(). Signed-off-by:
-
Frederic Danis authored
Add initial and operational speeds. Change to operational speed as soon as possible. If controller set_baudrate() fails, continue at initial speed. Signed-off-by:
-
Frederic Danis authored
Add "waiting for configuration" address. Add lmp_subver and firmware name for BCM4324B3 controller. Signed-off-by:
-
Frederic Danis authored
Move request/release_firmware() out of btbcm_patchram(). This allows a better error management, if request_firmware() returns an error then the controller will be used without firmware loading and 0 is returned. This will imply to change btbcm_patchram() to accept a firmware instead of firmware name. Signed-off-by:
-
- 04 Jun, 2015 4 commits
-
-
Varka Bhadram authored
This patch will export the supported commands by the devices to the userspace. This will be useful to check if HardMAC drivers can support a specific command or not. Signed-off-by:
Varka Bhadram <varkab@cdac.in> Acked-by:
-
Lennert Buytenhek authored
The AF_IEEE802154 sockaddr looks like this: struct sockaddr_ieee802154 { sa_family_t family; /* AF_IEEE802154 */ struct ieee802154_addr_sa addr; }; struct ieee802154_addr_sa { int addr_type; u16 pan_id; union { u8 hwaddr[IEEE802154_ADDR_LEN]; u16 short_addr; }; }; On most architectures there will be implicit structure padding here, in two different places: * In struct sockaddr_ieee802154, two bytes of padding between 'family' (unsigned short) and 'addr', so that 'addr' starts on a four byte boundary. * In struct ieee802154_addr_sa, two bytes at the end of the structure, to make the structure 16 bytes. When calling recvmsg(2) on a PF_IEEE802154 SOCK_DGRAM socket, the ieee802154 stack constructs a struct sockaddr_ieee802154 on the kernel stack without clearing these padding fields, and, depending on the addr_type, between four and ten bytes of uncleared kernel stack will be copied to userspace. We can't just insert two 'u16 __pad's in the right places and zero those before copying an address to userspace, as not all architectures insert this implicit padding -- from a quick test it seems that avr32, cris and m68k don't insert this padding, while every other architecture that I have cross compilers for does insert this padding. The easiest way to plug the leak is to just memset the whole struct sockaddr_ieee802154 before filling in the fields we want to fill in, and that's what this patch does. Cc: stable@vger.kernel.org Signed-off-by: -
Varka Bhadram authored
This patch make to use the same naming convention that mac802154 tracing follows and fixes the format specifier for extended addr. Signed-off-by:
-
Prasanna Karthik authored
Fix spaces required around that '=' reported by checkpatch. Signed-off-by:
-
- 02 Jun, 2015 2 commits
-
-
Varka Bhadram authored
This patch adds trace events for driver operations. Signed-off-by:
-
Alexander Aring authored
This patch sets the acknowledge request bit inside the 802.15.4 mac header when frame retries is 0 or above. The other frame retries value which is -1 indicates that the transmitter doesn't care about an acknowledge frame which will be ignored after transmitting if the node sends anyway an ack frame after receiving. This is currently unnecessary traffic if the max frame retries parameter is -1. Signed-off-by:
-
- 31 May, 2015 1 commit
-
-
Varka Bhadram authored
This patch updates the current channel to 11. This is the default value on reset. Signed-off-by:
-
