Add 4 new Dolphin Systems, same configuration as older systems.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220816151901.1398007-1-sbinding@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The device CLSA0101 has two instances of CS35L41
connected by I2C.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220727095924.80884-5-tanureal@opensource.cirrus.com
Link: https://lore.kernel.org/r/20220816194639.13870-1-cam@neo-zeon.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Lenovo Yoga7 14IAL7 requires the same quirk as Lenovo Yoga9 14IAP7 for
fixing the bass speaker problems.
Reported-by: Pascal Gross <baipush@tutanota.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/N9_CjBz--3-2@tutanota.com
Link: https://lore.kernel.org/r/20220816132132.15520-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

For devices which use HID CSC3551, correct ACPI _DSD properties are
required to be able support those systems.
Add error message to clarify this.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220815162906.463108-1-sbinding@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v6.0-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.0

A relatively large batch of fixes that came in since my pull request,
none of them too major and mostly device specific apart from a series of
security/robustness improvements from Takashi.

These Asus Zenbook laptop use Realtek HDA codec combined with
2xCS35L41 Amplifiers using SPI.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220815141953.25197-1-sbinding@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

With jackpoll_in_suspend flag set, there is a possibility that
jack poll worker thread will run even after system suspend was
completed. Any register access after system pm callback flow
will result in kernel crash as still jack poll worker thread
tries to access registers.

To fix the crash issue during system flow, cancel the jack poll
worker thread during system pm prepare callback and cancel the
worker thread at start of runtime suspend callback and re-schedule
at last to avoid any unwarranted access of register by worker thread
during suspend flow.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Fixes: b33115bd ("ALSA: hda: Jack detection poll in suspend state")
Link: https://lore.kernel.org/r/20220811052704.2944-1-mkumard@nvidia.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The 12,1 model requires the same configuration as the 12,2 model
to enable headphones but has a different codec SSID. Adds
12,1 SSID for matching quirk.

[ re-sorted in SSID order by tiwai ]
Signed-off-by: Allen Ballway <ballway@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220810152701.1.I902c2e591bbf8de9acb649d1322fa1f291849266@changeidSigned-off-by: Takashi Iwai <tiwai@suse.de>

The two commits referenced below break mono playback via I2S DAI because
they set BCLK to half the required speed. For PCM transport over I2S, the
number of transmitted channels is always 2, even for mono playback.

Fixes: dcd79364 ("ASoC: codec: tlv3204: Enable 24 bit audio support")
Fixes: 40b37136 ("ASoC: tlv320aic32x4: Fix bdiv clock rate derivation")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220810104156.665452-1-p.zabel@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Martin Povišer <povik+lin@cutebit.org>:

The first two fixes should be straightforward.

The latter two clean up what looks to me like a mess in the setting of
power levels. However we settle it, we should then do the same changes
to TAS2764, which has the same template (and maybe there are other
drivers).

Don't populate the read-only array marker on the stack but instead make
it static const. Also makes the object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220809181544.3046429-1-colin.i.king@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Board ID 8786 seems to be another variant of the Omen 15 that needs
ALC285_FIXUP_HP_MUTE_LED for working mute LED.
Signed-off-by: Bedant Patnaik <bedant.patnaik@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220809142455.6473-1-bedant.patnaik@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

ASUS ROG Zenith II has two USB interfaces, one for the front headphone
and another for the rest I/O.  Currently we provided the mixer mapping
for the latter but with an incomplete form.

This patch corrects and provides more comprehensive mixer mapping, as
well as providing the proper device names for both the front headphone
and main audio.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211005
Fixes: 2a48218f ("ALSA: usb-audio: Add mixer workaround for TRX40 and co")
Link: https://lore.kernel.org/r/20220809073259.18849-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The Focusrite Clarett+ 8Pre uses the same protocol as the Scarlett Gen
2 and Gen 3 product range. This patch adds support for the Clarett+
8Pre by adding appropriate entries to the scarlett2 driver.

The Clarett+ 2Pre and 4Pre, and the Clarett USB product line
presumably use the same protocol as well, so support for them can
easily be added if someone can test.
Signed-off-by: Christian Colglazier <christian@cacolglazier.com>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20220809043241.GA2749152@m.b4.vuSigned-off-by: Takashi Iwai <tiwai@suse.de>

The patch fixes the JD voltage dropping issue in the HDA JD using.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Reported-by: Mohan Kumar D <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20220808052836.25791-1-oder_chiou@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Because the PWR_CTRL field is modeled as the power state of the DAC
widget, and at the same time it is used to implement mute/unmute, we
need some additional book-keeping to have the right end result no matter
the sequence of calls. Without this fix, one can mute an ongoing stream
by toggling a speaker pin control.

Fixes: 1a476abc ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-5-povik+lin@cutebit.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The driver is setting the PWR_CTRL field in both the set_bias_level
callback and on DAPM events of the DAC widget (and also in the
mute_stream method). Drop the set_bias_level callback altogether as the
power setting it does is in conflict with the other code paths.

Fixes: 1a476abc ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-4-povik+lin@cutebit.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The part is a mono speaker amp, but it can do downmix and switch between
left and right channel, so the right channel range is 1 to 2.

Fixes: 1a476abc ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-3-povik+lin@cutebit.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Fix setting of FSYNC polarity for DAI formats other than I2S. Also
add support for polarity inversion.

Fixes: 1a476abc ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-2-povik+lin@cutebit.orgSigned-off-by: Mark Brown <broonie@kernel.org>

There is another LENOVO 20149 (Type1Sku0) Notebook model with
CX20590, the device PCI SSID is 17aa:3977, which headphones are
not responding, that requires the quirk CXT_PINCFG_LENOVO_NOTEBOOK.
Add the corresponding entry to the quirk table.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220808073406.19460-1-tangmeng@uniontech.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Changes to add HDMI capture support broke the machine driver probe for
all other platforms. The commit listed in the Fixes tag added a
board_id descriptor but didn't add the default name for the
sof_essx8336 machine driver.

Add the missing entry and remove the now-useless platform driver
alias.
Reported-by: Eugene J Markow <ejmarkow@yahoo.com>
BugLink: https://github.com/thesofproject/linux/issues/3336
Fixes: 86b1959a ("ASoC: Intel: sof_es8336: add support for HDMI_In capture")
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220805133332.207932-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Takashi Iwai <tiwai@suse.de>:

This is a patch series to paper over the theoretical buffer overflow
that might be caused by snprintf().  snprintf() is notorious for its
behavior and the usage of a safer version, scnprintf(), is
recommended.

When DPCM tries to add valid BE connections at dpcm_add_paths(), it
doesn't check whether the picked BE actually supports for the given
stream direction.  Due to that, when an asymmetric BE stream is
present, it picks up wrongly and this may result in a NULL dereference
at a later point where the code assumes the existence of a
corresponding BE substream.

This patch adds the check for the presence of the substream for the
target BE for avoiding the problem above.

Note that we have already some fix for non-existing BE substream at
commit 6246f283 ("ASoC: dpcm: skip missing substream while
applying symmetry").  But the code path we've hit recently is rather
happening before the previous fix.  So this patch tries to fix at
picking up a BE instead of parsing BE lists.

Fixes: bbf7d3b1 ("ASoC: soc-pcm: align BE 'atomicity' with that of the FE")
Reported-by: Alex Natalsson <harmoniesworlds@gmail.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/CADs9LoPZH_D+eJ9qjTxSLE5jGyhKsjMN7g2NighZ16biVxsyKw@mail.gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220801170510.26582-1-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>

The variable new is initialized with a value but it is never read. It is
being re-assigned a new value in every case path in the following switch
statement. The assignment is redundant and can be removed.

Cleans up clang scan build warning:
sound/pci/ice1712/quartet.c:569:8: warning: Although the value stored
to 'new' is used in the enclosing expression, the value is never actually
read from 'new' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220805120439.2341600-1-colin.i.king@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

When building with Clang we encounter these warnings:
| sound/soc/sof/ipc3-topology.c:2343:4: error: format specifies type
| 'unsigned char' but the argument has type 'int' [-Werror,-Wformat]
|                  SOF_ABI_MAJOR, SOF_ABI_MINOR, SOF_ABI_PATCH);
|                  ^~~~~~~~~~~~~~~^~~~~~~~~~~~~~~^~~~~~~~~~~~~

Use correct format specifier `%d` since args are of type int.

Link: https://github.com/ClangBuiltLinux/linux/issues/378Reported-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220803204442.2996580-1-justinstitt@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

We usually do cleanup in reverse order of init. Currently in case of
error rz_ssi_release_dma_channels() done in the reverse order. This
patch improves error handling in rz_ssi_probe() error path.

While at it, use "goto cleanup" style to reduce code duplication.
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220728092612.38858-1-biju.das.jz@bp.renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

snprintf() returns the would-be-filled size when the string overflows
the given buffer size, hence using this value may result in the buffer
overflow (although it's unrealistic).

This patch replaces with a safer version, scnprintf() for papering
over such a potential issue.

Fixes: 29c8e439 ("ASoC: SOF: Intel: hda: add extended rom status dump to error log")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220801165420.25978-4-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>

snprintf() returns the would-be-filled size when the string overflows
the given buffer size, hence using this value may result in the buffer
overflow (although it's unrealistic).

This patch replaces with a safer version, scnprintf() for papering
over such a potential issue.

Fixes: 5b10b629 ("ASoC: SOF: Add `memory_info` file to debugfs")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220801165420.25978-3-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>

snprintf() returns the would-be-filled size when the string overflows
the given buffer size, hence using this value may result in a buffer
overflow (although it's unrealistic).

This patch replaces it with a safer version, scnprintf() for papering
over such a potential issue.

Fixes: f1b3b320 ("ASoC: Intel: avs: Generic soc component driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220801165420.25978-2-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>

There is another Asus K42JZ model with the PCI SSID 1043:1313
that requires the quirk ALC269VB_FIXUP_ASUS_MIC_NO_PRESENCE.
Add the corresponding entry to the quirk table.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220805074534.20003-1-tangmeng@uniontech.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fixes speaker output on HP Spectre x360 15-eb0xxx

[ re-sorted in SSID order by tiwai ]
Signed-off-by: Ivan Hasenkampf <ivan.hasenkampf@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220803164001.290394-1-ivan.hasenkampf@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

For sysfs outputs, it's safer to use a new helper, sysfs_emit(),
instead of the raw sprintf() & co.  This patch replaces those usages
straightforwardly with a new helper, sysfs_emit().

Link: https://lore.kernel.org/r/20220801165639.26030-8-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

For sysfs outputs, it's safer to use a new helper, sysfs_emit(),
instead of the raw sprintf() & co.  This patch replaces those usages
straightforwardly with new helpers, sysfs_emit() and sysfs_emit_at().

Link: https://lore.kernel.org/r/20220801165639.26030-7-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

For sysfs outputs, it's safer to use a new helper, sysfs_emit(),
instead of the raw sprintf() & co.  This patch replaces such a
sprintf() call straightforwardly with the new helper.

Link: https://lore.kernel.org/r/20220801165639.26030-6-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

sysfs_emit() is a new helper to simplify the sysfs string output.
Replace the open-code with this new helper.

Link: https://lore.kernel.org/r/20220801165639.26030-5-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

For sysfs outputs, it's safer to use a new helper, sysfs_emit(),
instead of the raw sprintf() & co.  This patch replaces such sprintf()
calls with sysfs_emit() while simplifying the open code in
list_show().

Link: https://lore.kernel.org/r/20220801165639.26030-4-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

For sysfs outputs, it's safer to use a new helper, sysfs_emit(),
instead of the raw sprintf() & co.  This patch replaces such sprintf()
calls with sysfs_emit() while simplifying the open code in
modalias_show(); as modalias[] is a NUL-terminated string, we can pass
it straightly to a printf() argument.

Link: https://lore.kernel.org/r/20220801165639.26030-3-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

For sysfs outputs, it's safer to use a new helper, sysfs_emit(),
instead of the raw sprintf() & co.  This patch replaces the open code
straightforwardly with a new helper.

Link: https://lore.kernel.org/r/20220801165639.26030-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Updated DMI entries 21EM, 21EN, 21J5 and 21J6 for
AMD platforms P15v Gen 3 and P14s Gen 3.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216267Signed-off-by: syed saba kareem <Syed.SabaKareem@amd.com>
Reported-by: Pananchikkal Renjith <renjith.pananchikkal@amd.com>
Link: https://lore.kernel.org/r/20220802062503.159328-1-Syed.SabaKareem@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'asoc-v5.20-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: More updates for v5.20

More updates that came in since the last pull request I sent, a series
of driver specific changes:

 - Support for AMD RPL, some Intel platforms and Mediatek MT8186.