Skip to content

L
linux
Switch branch/tag
  1. 08 Dec, 2016 1 commit
  3. 06 Dec, 2016 21 commits
  5. 05 Dec, 2016 2 commits
    • Jens Axboe's avatar
      blk-mq: blk_account_io_start() takes a bool · 6e85eaf3
      Jens Axboe authored 
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarJohannes Thumshirn <jthumshirn@suse.de>
      6e85eaf3
    • Nicolai Stange's avatar
      block: fix unintended fallthrough in generic_make_request_checks() · 58886785
      Nicolai Stange authored 
      Since commit e73c23ff ("block: add async variant of
blkdev_issue_zeroout") messages like the following show up:

  EXT4-fs (dm-1): Delayed block allocation failed for inode 2368848 at
                  logical offset 0 with max blocks 1 with error 95
  EXT4-fs (dm-1): This should not happen!! Data will be lost

Due to the following fallthrough introduced with
commit 2d253440 ("block: Define zoned block device operations"),
generic_make_request_checks() would accept a REQ_OP_WRITE_SAME bio only
if the block device supports "write same" *and* is a zoned one:

  switch (bio_op(bio)) {
  [...]
  case REQ_OP_WRITE_SAME:
        if (!bdev_write_same(bio->bi_bdev))
                goto not_supported;
  case REQ_OP_ZONE_REPORT:
  case REQ_OP_ZONE_RESET:
                if (!bdev_is_zoned(bio->bi_bdev))
                        goto not_supported;
                break;
  [...]
  }

Thus, although the bio setup as done by __blkdev_issue_write_same() from
commit e73c23ff ("block: add async variant of blkdev_issue_zeroout")
would succeed, its actual submission would not, resulting in the
EOPNOTSUPP == 95.

Fix this by removing the fallthrough which, due to the lack of an explicit
comment, seems to be unintended anyway.

Fixes: e73c23ff ("block: add async variant of blkdev_issue_zeroout")
Fixes: 2d253440 ("block: Define zoned block device operations")
Signed-off-by: default avatarNicolai Stange <nicstange@gmail.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      58886785
  7. 03 Dec, 2016 3 commits
  9. 01 Dec, 2016 9 commits
    • Ritesh Harjani's avatar
      block: factor out req_set_nomerge · e0c72300
      Ritesh Harjani authored 
      Factor out common code for setting REQ_NOMERGE flag which is being used
out at certain places and make it a helper instead, req_set_nomerge().
Signed-off-by: default avatarRitesh Harjani <riteshh@codeaurora.org>

Get rid of the inline.
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      e0c72300
    • Rabin Vincent's avatar
      block: protect iterate_bdevs() against concurrent close · af309226
      Rabin Vincent authored 
      If a block device is closed while iterate_bdevs() is handling it, the
following NULL pointer dereference occurs because bdev->b_disk is NULL
in bdev_get_queue(), which is called from blk_get_backing_dev_info() (in
turn called by the mapping_cap_writeback_dirty() call in
__filemap_fdatawrite_range()):

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000508
 IP: [<ffffffff81314790>] blk_get_backing_dev_info+0x10/0x20
 PGD 9e62067 PUD 9ee8067 PMD 0
 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
 Modules linked in:
 CPU: 1 PID: 2422 Comm: sync Not tainted 4.5.0-rc7+ #400
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
 task: ffff880009f4d700 ti: ffff880009f5c000 task.ti: ffff880009f5c000
 RIP: 0010:[<ffffffff81314790>]  [<ffffffff81314790>] blk_get_backing_dev_info+0x10/0x20
 RSP: 0018:ffff880009f5fe68  EFLAGS: 00010246
 RAX: 0000000000000000 RBX: ffff88000ec17a38 RCX: ffffffff81a4e940
 RDX: 7fffffffffffffff RSI: 0000000000000000 RDI: ffff88000ec176c0
 RBP: ffff880009f5fe68 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000001 R11: 0000000000000000 R12: ffff88000ec17860
 R13: ffffffff811b25c0 R14: ffff88000ec178e0 R15: ffff88000ec17a38
 FS:  00007faee505d700(0000) GS:ffff88000fb00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 0000000000000508 CR3: 0000000009e8a000 CR4: 00000000000006e0
 Stack:
  ffff880009f5feb8 ffffffff8112e7f5 0000000000000000 7fffffffffffffff
  0000000000000000 0000000000000000 7fffffffffffffff 0000000000000001
  ffff88000ec178e0 ffff88000ec17860 ffff880009f5fec8 ffffffff8112e81f
 Call Trace:
  [<ffffffff8112e7f5>] __filemap_fdatawrite_range+0x85/0x90
  [<ffffffff8112e81f>] filemap_fdatawrite+0x1f/0x30
  [<ffffffff811b25d6>] fdatawrite_one_bdev+0x16/0x20
  [<ffffffff811bc402>] iterate_bdevs+0xf2/0x130
  [<ffffffff811b2763>] sys_sync+0x63/0x90
  [<ffffffff815d4272>] entry_SYSCALL_64_fastpath+0x12/0x76
 Code: 0f 1f 44 00 00 48 8b 87 f0 00 00 00 55 48 89 e5 <48> 8b 80 08 05 00 00 5d
 RIP  [<ffffffff81314790>] blk_get_backing_dev_info+0x10/0x20
  RSP <ffff880009f5fe68>
 CR2: 0000000000000508
 ---[ end trace 2487336ceb3de62d ]---

The crash is easily reproducible by running the following command, if an
msleep(100) is inserted before the call to func() in iterate_devs():

 while :; do head -c1 /dev/nullb0; done > /dev/null & while :; do sync; done

Fix it by holding the bd_mutex across the func() call and only calling
func() if the bdev is opened.

Cc: stable@vger.kernel.org
Fixes: 5c0d6b60 ("vfs: Create function for iterating over block devices")
Reported-and-tested-by: default avatarWei Fang <fangwei1@huawei.com>
Signed-off-by: default avatarRabin Vincent <rabinv@axis.com>
Signed-off-by: default avatarJan Kara <jack@suse.cz>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      af309226
    • Pan Bian's avatar
      block: mtip32xx: set error code on failure · 5b0e34e1
      Pan Bian authored 
      Fix bug https://bugzilla.kernel.org/show_bug.cgi?id=188531. In function
mtip_block_initialize(), variable rv takes the return value, and its
value should be negative on errors. rv is initialized as 0 and is not
reset when the call to ida_pre_get() fails. So 0 may be returned.
The return value 0 indicates that there is no error, which may be
inconsistent with the execution status. This patch fixes the bug by
explicitly assigning -ENOMEM to rv on the branch that ida_pre_get()
fails.
Signed-off-by: default avatarPan Bian <bianpan2016@163.com>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      5b0e34e1
    • Chaitanya Kulkarni's avatar
      nvmet: add support for the Write Zeroes command · d2629209
      Chaitanya Kulkarni authored 
      Add support for handling write zeroes command on target.
Call into __blkdev_issue_zeroout, which the block layer expands into the
best suitable variant of zeroing the LBAs. Allow write zeroes operation
to deallocate the LBAs when calling __blkdev_issue_zeroout.
Signed-off-by: default avatarChaitanya Kulkarni <chaitanya.kulkarni@hgst.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      d2629209
    • Chaitanya Kulkarni's avatar
      nvme: add support for the Write Zeroes command · 6d31e3ba
      Chaitanya Kulkarni authored 
      Allow write zeroes operations (REQ_OP_WRITE_ZEROES) on the block
device, if the device supports optional command bit set for write
zeroes. Add support to setup write zeroes command. Set maximum possible
write zeroes sectors in one write zeroes command according to
nvme write zeroes command definition.
Signed-off-by: default avatarChaitanya Kulkarni <chaitanya.kulkarni@hgst.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      6d31e3ba
    • Chaitanya Kulkarni's avatar
      nvme.h: add Write Zeroes definitions · 3b7c33b2
      Chaitanya Kulkarni authored 
      Add the command structure, optional command set support (ONCS) bit and
a new error code for the Write Zeroes command.
Signed-off-by: default avatarChaitanya Kulkarni <chaitanya.kulkarni@hgst.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      3b7c33b2
    • Chaitanya Kulkarni's avatar
      block: add support for REQ_OP_WRITE_ZEROES · a6f0788e
      Chaitanya Kulkarni authored 
      This adds a new block layer operation to zero out a range of
LBAs. This allows to implement zeroing for devices that don't use
either discard with a predictable zero pattern or WRITE SAME of zeroes.
The prominent example of that is NVMe with the Write Zeroes command,
but in the future, this should also help with improving the way
zeroing discards work. For this operation, suitable entry is exported in
sysfs which indicate the number of maximum bytes allowed in one
write zeroes operation by the device.
Signed-off-by: default avatarChaitanya Kulkarni <chaitanya.kulkarni@hgst.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      a6f0788e
    • Chaitanya Kulkarni's avatar
      block: add async variant of blkdev_issue_zeroout · e73c23ff
      Chaitanya Kulkarni authored 
      Similar to __blkdev_issue_discard this variant allows submitting
the final bio asynchronously and chaining multiple ranges
into a single completion.
Signed-off-by: default avatarChaitanya Kulkarni <chaitanya.kulkarni@hgst.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      e73c23ff
    • Damien Le Moal's avatar
      block: Check partition alignment on zoned block devices · b02d8aae
      Damien Le Moal authored 
      Both blkdev_report_zones and blkdev_reset_zones can operate on a partition of
a zoned block device. However, the first and last zones reported for a
partition make sense only if the partition start sector and size are aligned
on the device zone size. The same applies for zone reset. Resetting the first
or the last zone of a partition straddling zones may impact neighboring
partitions. Finally, if a partition start sector is not at the beginning of a
sequential zone, it will be impossible to write to the first sectors of the
partition on a host-managed device.
Avoid all these problems and incoherencies by ignoring partitions that are not
zone aligned.

Note: Even with CONFIG_BLK_DEV_ZONED disabled, bdev_is_zoned() will report the
correct disk zoning type (host-aware, host-managed or none) but
bdev_zone_size() will always return 0 for zoned block devices (i.e. the zone
size is unknown). So test this as a way to ensure that a zoned block device is
being handled as such. As a result, for a host-aware devices, unaligned zone
partitions will be accepted with CONFIG_BLK_DEV_ZONED disabled. That is, the
disk will be treated as a regular block device (as it should). If zoned block
device support is enabled, only aligned partitions will be accepted.
Signed-off-by: default avatarDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: default avatarHannes Reinecke <hare@suse.com>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      b02d8aae
  11. 29 Nov, 2016 4 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7