- 12 Mar, 2021 7 commits
-
-
Kuninori Morimoto authored
rtd->dai_link is setuped at soc_new_pcm_runtime(), thus "rtd->dai_link == NULL" is never happen. This patch removes unneeded !rtd->dai_link check Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87blbtuoar.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
At dpcm_be_dai_startup_unwind(), it indicates error message at (1) if this function was called with no users. But, it doesn't use "continue" here. Thus, users will be a negative number at (2) void dpcm_be_dai_startup_unwind(...) { ... for_each_dpcm_be(...) { ... (1) if (be->dpcm[stream].users == 0) dev_err(...); (2) if (--be->dpcm[stream].users != 0) continue; At dpcm_be_dai_startup(), it indicates error message if user reached to MAX USERS at (A). But, it doesn't use "continue" here. Thus, it will be over MAX USERS at (B). int dpcm_be_dai_startup(...) { ... for_each_dpcm_be(...) { ... (A) if (be->dpcm[stream].users == DPCM_MAX_BE_USERS) dev_err(...); (B) if (be->dpcm[stream].users++ != 0) continue; These are just bug. This patch fixup these. Signed-off-by: -
Kuninori Morimoto authored
Current soc_pcm_open() is checking runtime->hw parameters, but having such function is very helpful for reading code. This patch adds new soc_hw_sanity_check() and checks runtime->hw parameters there. And print its debug message there, too. Debug message print out timing is exchanged after this patch, but it is not a big deal, because it is for debug. Signed-off-by:
-
Kuninori Morimoto authored
Current soc-pcm has soc_pcm_has_symmetry() and using it as if (soc_pcm_has_symmetry(substream)) substream->runtime->hw.info |= SNDRV_PCM_INFO_JOINT_DUPLEX; We want to share same operation as same function. This patch adds soc_pcm_update_symmetry() and pack above code in one function. Signed-off-by:
-
Kuninori Morimoto authored
snd_soc_set_runtime_hwparams() is called from each driver to initialize hw parameters, but coping each parameters one-by-one. Current code is not copying all parameters, but no big effect if we do it. This patch copies all parameters by simple code. Signed-off-by:
-
Kuninori Morimoto authored
soc-pcm needs DAI name and it will be "multicpu/multicodec" if it has many DAIs. But current code is using very verbose for it. This patch uses macro and makes code simple. Signed-off-by:
-
Kuninori Morimoto authored
soc_pcm_apply_symmetry() is used like below in all cases. if (snd_soc_dai_active(dai)) { err = soc_pcm_apply_symmetry(fe_substream, dai); ... } Because of this style, the code is deep nested. This patch checks it under soc_pcm_apply_symmetry(), and makes code simple. static int soc_pcm_apply_symmetry(...) { ... => if (!snd_soc_dai_active(...)) return 0; ... } => ret = soc_pcm_apply_symmetry(); if (ret < 0) ... Signed-off-by:
-
- 11 Mar, 2021 15 commits
-
-
Mark Brown authored
Merge series "ASoC: mediatek: mt8183-mt6358: support machine driver for rt1015p" from Tzung-Bi Shih <tzungbi@google.com>: The series reuses mt8183-mt6358-ts3a227-max98357.c for supporting machine driver with rt1015p speaker amplifier. The 1st patch adds document for the new proposed compatible string. The 2nd patch changes the machine driver to support "RT1015P" codec. Tzung-Bi Shih (2): ASoC: dt-bindings: mt8183: add compatible string for using rt1015p ASoC: mediatek: mt8183: support machine driver with rt1015p .../sound/mt8183-mt6358-ts3a227-max98357.txt | 1 + sound/soc/mediatek/Kconfig | 1 + .../mt8183/mt8183-mt6358-ts3a227-max98357.c | 29 +++++++++++++++++++ 3 files changed, 31 insertions(+) -- 2.31.0.rc2.261.g7f71774620-goog
-
Mark Brown authored
Merge series "ASoC: codecs: wolfson: remove cppcheck warnings" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: There should be no functionality change, just minor fixes to make warnings go away. Pierre-Louis Bossart (10): ASoC: arizona: fix function argument ASoC: madera: align function prototype ASoC: wm2200: remove unused structure ASoC: wm8903: remove useless assignments ASoC: wm8958-dsp2: rename local 'control' arrays ASoC: wm8978: clarify expression ASoC: wm8994: align function prototype ASoC: wm8996: clarify expression ASoC: wm_adsp: simplify return value ASoC: wm_hubs: align function prototype sound/soc/codecs/arizona.h | 2 +- sound/soc/codecs/madera.h | 2 +- sound/soc/codecs/wm2200.c | 7 ------- sound/soc/codecs/wm8903.c | 2 -- sound/soc/codecs/wm8958-dsp2.c | 16 ++++++++-------- sound/soc/codecs/wm8978.c | 2 +- sound/soc/codecs/wm8994.h | 2 +- sound/soc/codecs/wm8996.c | 2 +- sound/soc/codecs/wm_adsp.c | 2 +- sound/soc/codecs/wm_hubs.h | 2 +- 10 files changed, 15 insertions(+), 24 deletions(-) -- 2.25.1
-
Pierre-Louis Bossart authored
When DMI information is not present, trying to assign the card long name results in the following warning. WARNING KERN tegra-audio-graph-card sound: ASoC: no DMI vendor name! The initial solution suggested was to test if the card device is an ACPI one. This causes a regression visible to userspace on all Intel platforms, with UCM unable to load card profiles based on DMI information: the card devices are not necessarily ACPI ones, e.g. when the parent creates platform devices on Intel devices. To fix this problem, this patch exports the existing dmi_available variable and tests it in the ASoC core. Fixes: c0141704 ("ASoC: soc-core: Prevent warning if no DMI table is present") Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Takashi Iwai <tiwai@suse.de> Acked-by:
Jean Delvare <jdelvare@suse.de> Link: https://lore.kernel.org/r/20210310193928.108850-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Tzung-Bi Shih authored
Supports machine driver with rt1015p ("mt8183_mt6358_ts3a227_rt1015p"). Embeds in the existing mt8183-mt6358-ts3a227-max98357.c because they share most of the code. Signed-off-by:Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20210311033151.1818603-3-tzungbi@google.comSigned-off-by:
-
Tzung-Bi Shih authored
Machines with rt1015p should use the compatible string "mt8183-mt6358-ts3a227-rt1015p". Signed-off-by:
-
Pierre-Louis Bossart authored
cppcheck warnings: sound/soc/codecs/wm_hubs.c:1194:11: style:inconclusive: Function 'wm_hubs_handle_analogue_pdata' argument 8 names different: declaration 'micbias1_dly' definition 'micbias1_delay'. [funcArgNamesDifferent] int micbias1_delay, int micbias2_delay, ^ sound/soc/codecs/wm_hubs.h:59:11: note: Function 'wm_hubs_handle_analogue_pdata' argument 8 names different: declaration 'micbias1_dly' definition 'micbias1_delay'. int micbias1_dly, int micbias2_dly, ^ sound/soc/codecs/wm_hubs.c:1194:11: note: Function 'wm_hubs_handle_analogue_pdata' argument 8 names different: declaration 'micbias1_dly' definition 'micbias1_delay'. int micbias1_delay, int micbias2_delay, ^ sound/soc/codecs/wm_hubs.c:1194:31: style:inconclusive: Function 'wm_hubs_handle_analogue_pdata' argument 9 names different: declaration 'micbias2_dly' definition 'micbias2_delay'. [funcArgNamesDifferent] int micbias1_delay, int micbias2_delay, ^ sound/soc/codecs/wm_hubs.h:59:29: note: Function 'wm_hubs_handle_analogue_pdata' argument 9 names different: declaration 'micbias2_dly' definition 'micbias2_delay'. int micbias1_dly, int micbias2_dly, ^ sound/soc/codecs/wm_hubs.c:1194:31: note: Function 'wm_hubs_handle_analogue_pdata' argument 9 names different: declaration 'micbias2_dly' definition 'micbias2_delay'. int micbias1_delay, int micbias2_delay, ^ Signed-off-by:Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210311004332.120901-11-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/codecs/wm_adsp.c:2092:9: warning: Identical condition and return expression 'ret', return value is always 0 [identicalConditionAfterEarlyExit] return ret; ^ sound/soc/codecs/wm_adsp.c:2070:6: note: If condition 'ret' is true, the function will return/exit if (ret) ^ sound/soc/codecs/wm_adsp.c:2092:9: note: Returning identical expression 'ret' return ret; ^ Signed-off-by: -
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/codecs/wm8996.c:2109:23: style: Clarify calculation precedence for '/' and '?'. [clarifyCalculation] timeout = timeout/2 ? : 1; ^ Signed-off-by: -
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/codecs/wm8994.c:3923:26: style:inconclusive: Function 'wm8958_mic_detect' argument 3 names different: declaration 'cb' definition 'det_cb'. [funcArgNamesDifferent] wm1811_micdet_cb det_cb, void *det_cb_data, ^ sound/soc/codecs/wm8994.h:53:26: note: Function 'wm8958_mic_detect' argument 3 names different: declaration 'cb' definition 'det_cb'. wm1811_micdet_cb cb, void *det_cb_data, ^ sound/soc/codecs/wm8994.c:3923:26: note: Function 'wm8958_mic_detect' argument 3 names different: declaration 'cb' definition 'det_cb'. wm1811_micdet_cb det_cb, void *det_cb_data, ^ Signed-off-by: -
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/codecs/wm8978.c:727:57: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] enum wm8978_sysclk_src current_clk_id = clking & 0x100 ? ^ Signed-off-by: -
Pierre-Louis Bossart authored
cppcheck complains about shadowed variables: sound/soc/codecs/wm8958-dsp2.c:926:27: style: Local variable 'control' shadows outer variable [shadowVariable] struct snd_kcontrol_new control[] = { ^ sound/soc/codecs/wm8958-dsp2.c:900:17: note: Shadowed declaration struct wm8994 *control = wm8994->wm8994; ^ sound/soc/codecs/wm8958-dsp2.c:926:27: note: Shadow variable struct snd_kcontrol_new control[] = { ^ sound/soc/codecs/wm8958-dsp2.c:952:27: style: Local variable 'control' shadows outer variable [shadowVariable] struct snd_kcontrol_new control[] = { ^ sound/soc/codecs/wm8958-dsp2.c:900:17: note: Shadowed declaration struct wm8994 *control = wm8994->wm8994; ^ sound/soc/codecs/wm8958-dsp2.c:952:27: note: Shadow variable struct snd_kcontrol_new control[] = { ^ sound/soc/codecs/wm8958-dsp2.c:978:27: style: Local variable 'control' shadows outer variable [shadowVariable] struct snd_kcontrol_new control[] = { ^ sound/soc/codecs/wm8958-dsp2.c:900:17: note: Shadowed declaration struct wm8994 *control = wm8994->wm8994; ^ sound/soc/codecs/wm8958-dsp2.c:978:27: note: Shadow variable struct snd_kcontrol_new control[] = { ^ sound/soc/codecs/wm8958-dsp2.c:1006:27: style: Local variable 'control' shadows outer variable [shadowVariable] struct snd_kcontrol_new control[] = { ^ sound/soc/codecs/wm8958-dsp2.c:900:17: note: Shadowed declaration struct wm8994 *control = wm8994->wm8994; ^ sound/soc/codecs/wm8958-dsp2.c:1006:27: note: Shadow variable struct snd_kcontrol_new control[] = { ^ fix by adding a prefix related to each control. Signed-off-by: -
Pierre-Louis Bossart authored
cppcheck warnings: sound/soc/codecs/wm8903.c:1552:11: style: Variable 'best_val' is assigned a value that is never used. [unreadVariable] best_val = ((clk_sys * 10) / bclk_divs[0].ratio) - bclk; ^ sound/soc/codecs/wm8903.c:1559:12: style: Variable 'best_val' is assigned a value that is never used. [unreadVariable] best_val = cur_val; ^ Indeed what matters in the code is the blck_div, the best_val is assigned but never tested or used. Signed-off-by: -
Pierre-Louis Bossart authored
cppcheck complains about some members not being used, but it's really the entire structure that is never used anywhere. Signed-off-by:
-
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/codecs/madera.c:3372:51: style:inconclusive: Function 'madera_init_dai' argument 2 names different: declaration 'dai' definition 'id'. [funcArgNamesDifferent] int madera_init_dai(struct madera_priv *priv, int id) ^ sound/soc/codecs/madera.h:433:51: note: Function 'madera_init_dai' argument 2 names different: declaration 'dai' definition 'id'. int madera_init_dai(struct madera_priv *priv, int dai); ^ sound/soc/codecs/madera.c:3372:51: note: Function 'madera_init_dai' argument 2 names different: declaration 'dai' definition 'id'. int madera_init_dai(struct madera_priv *priv, int id) ^ Signed-off-by: -
Pierre-Louis Bossart authored
Cppcheck warning: sound/soc/codecs/arizona.c:2042:53: style:inconclusive: Function 'arizona_init_dai' argument 2 names different: declaration 'dai' definition 'id'. [funcArgNamesDifferent] int arizona_init_dai(struct arizona_priv *priv, int id) ^ sound/soc/codecs/arizona.h:320:53: note: Function 'arizona_init_dai' argument 2 names different: declaration 'dai' definition 'id'. int arizona_init_dai(struct arizona_priv *priv, int dai); ^ sound/soc/codecs/arizona.c:2042:53: note: Function 'arizona_init_dai' argument 2 names different: declaration 'dai' definition 'id'. int arizona_init_dai(struct arizona_priv *priv, int id) ^ Signed-off-by:
-
- 10 Mar, 2021 18 commits
-
-
Mark Brown authored
Merge series "Report jack and button detection + Capture Support" from Lucas Tanure <tanureal@opensource.cirrus.com>: Hi All, Here is a patch series for reporting to user space jack and button events and add the support for Capture. With some cleanups and fixes along the way. Regards, Lucas Tanure Lucas Tanure (12): ASoC: cs42l42: Fix Bitclock polarity inversion ASoC: cs42l42: Fix channel width support ASoC: cs42l42: Fix mixer volume control ASoC: cs42l42: Don't enable/disable regulator at Bias Level ASoC: cs42l42: Always wait at least 3ms after reset ASoC: cs42l42: Remove power if the driver is being removed ASoC: cs42l42: Disable regulators if probe fails ASoC: cs42l42: Provide finer control on playback path ASoC: cs42l42: Set clock source for both ways of stream ASoC: cs42l42: Add Capture Support ASoC: cs42l42: Report jack and button detection ASoC: cs42l42: Use bclk from hw_params if set_sysclk was not called Richard Fitzgerald (3): ASoC: cs42l42: Wait at least 150us after writing SCLK_PRESENT ASoC: cs42l42: Only start PLL if it is needed ASoC: cs42l42: Wait for PLL to lock before switching to it sound/soc/codecs/cs42l42.c | 435 +++++++++++++++++++++---------------- sound/soc/codecs/cs42l42.h | 41 +++- 2 files changed, 282 insertions(+), 194 deletions(-) -- 2.30.1
-
Mark Brown authored
Merge series "Add I2S-MCC support for Microchip's SAMA7G5" from Codrin Ciubotariu <codrin.ciubotariu@microchip.com>: SAMA7G5 includes an updated version of I2S-MCC, found previously on SAM9X60. This controller includes 8 data pins, 4 for playback and 4 for capture. For I2S and LEFT_J formats, these pins can be used to send/receive up to 8 audio channels. For DSP_A, with TDM, any pins pair (DIN/DOUT) from these 4 can be selected to send/receive data. This version also includes 2 FIFOs (send and receive). This patch set starts by moving the driver's bindings to yaml and continues with adding a new compatible for the SAMA7G5 variant, followed by the changes needed for I2S/LEFT_J support, TDM pin pair selection and FIFO support, exclusively for SAMA7G5. Changes in v2: - moved DT binding conversion patch from the beginning to the end of the patch serieses - patches that update the DT binding are modified to change .txt file instead of .yaml Codrin Ciubotariu (7): dt-bindings: mchp,i2s-mcc: Add SAMA7G5 to binding ASoC: mchp-i2s-mcc: Add compatible for SAMA7G5 ASoC: mchp-i2s-mcc: Add multi-channel support for I2S and LEFT_J formats dt-bindings: mchp,i2s-mcc: Add property to specify pin pair for TDM ASoC: mchp-i2s-mcc: Add support to select TDM pins ASoC: mchp-i2s-mcc: Add FIFOs support ASoC: convert Microchip I2SMCC binding to yaml .../bindings/sound/mchp,i2s-mcc.yaml | 108 ++++++++++++ .../bindings/sound/mchp-i2s-mcc.txt | 43 ----- sound/soc/atmel/Kconfig | 3 + sound/soc/atmel/mchp-i2s-mcc.c | 161 +++++++++++++++--- 4 files changed, 252 insertions(+), 63 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml delete mode 100644 Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt -- 2.27.0 -
Shuming Fan authored
This patch keeps the delay time (50 ms) for jack detection and zero delay time for the button press. This patch improves the reaction of the button press. Signed-off-by:
Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20210309085827.32032-1-shumingf@realtek.com Tested-by Curtis Malainey <cujomalainey@chromium.org> Signed-off-by:
-
Wei Yongjun authored
Remove including <linux/version.h> that don't need it. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210309131455.1883120-1-weiyongjun1@huawei.comSigned-off-by:
-
Wei Yongjun authored
In case of error, the function devm_regmap_init_sdw_mbq() and devm_regmap_init_sdw() returns ERR_PTR() not NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 393c52d2d109 ("ASoC: rt715-sdca: Add RT715 sdca vendor-specific driver") Reported-by: -
Richard Fitzgerald authored
The PLL should have locked before using it to supply MCLK. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by:
Lucas Tanure <tanureal@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210306185553.62053-16-tanureal@opensource.cirrus.comSigned-off-by:
-
Richard Fitzgerald authored
The PLL is only needed for sclk < 11289600 Hz and cs42l42_pll_config() will not configure it for higher rates. So it must only be enabled when it is needed. Signed-off-by:
-
Richard Fitzgerald authored
There must be a delay of at least 150us after writing SCLK_PRESENT before issuing another I2C write. This is done using struct reg_sequence because it can specify a delay after the write and the whole sequence is written atomically. Signed-off-by:
-
Lucas Tanure authored
Add support for reading the source clock from snd_soc_params_to_bclk so the machine driver is not required to call cs42l42_set_sysclk Signed-off-by:
-
Lucas Tanure authored
Report the Jack events to the user space through ALSA. Also moves request_threaded_irq() to component_probe so it don't get interrupts before the initialization the struct snd_soc_jack. Signed-off-by:
-
Lucas Tanure authored
Add support for capture path on headseat pins Signed-off-by:
-
Lucas Tanure authored
Move the enable/disable of clocks to cs42l42_mute_stream so the record path also get clocks. Signed-off-by:
-
Lucas Tanure authored
Removing cs42l42_hpdrv_evt that enables the entire chain and replace by a set of widgets that can better define the codec Signed-off-by:
-
Lucas Tanure authored
In case of cs42l42_i2c_probe() fail, the regulators were left enabled. Signed-off-by:
-
Lucas Tanure authored
Ensure the power supplies are turned off when removing the driver Signed-off-by:
-
Codrin Ciubotariu authored
This patch converts the Microchip I2SMCC bindings to DT schema format using json-schema. Signed-off-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210301170905.835091-8-codrin.ciubotariu@microchip.comSigned-off-by:
-
Mark Brown authored
Merge series "Report jack and button detection + Capture Support" from Lucas Tanure <tanureal@opensource.cirrus.com>: Hi All, Here is a patch series for reporting to user space jack and button events and add the support for Capture. With some cleanups and fixes along the way. Regards, Lucas Tanure Lucas Tanure (12): ASoC: cs42l42: Fix Bitclock polarity inversion ASoC: cs42l42: Fix channel width support ASoC: cs42l42: Fix mixer volume control ASoC: cs42l42: Don't enable/disable regulator at Bias Level ASoC: cs42l42: Always wait at least 3ms after reset ASoC: cs42l42: Remove power if the driver is being removed ASoC: cs42l42: Disable regulators if probe fails ASoC: cs42l42: Provide finer control on playback path ASoC: cs42l42: Set clock source for both ways of stream ASoC: cs42l42: Add Capture Support ASoC: cs42l42: Report jack and button detection ASoC: cs42l42: Use bclk from hw_params if set_sysclk was not called Richard Fitzgerald (3): ASoC: cs42l42: Wait at least 150us after writing SCLK_PRESENT ASoC: cs42l42: Only start PLL if it is needed ASoC: cs42l42: Wait for PLL to lock before switching to it sound/soc/codecs/cs42l42.c | 437 +++++++++++++++++++++---------------- sound/soc/codecs/cs42l42.h | 41 +++- 2 files changed, 282 insertions(+), 196 deletions(-) -- 2.30.1
-
Shuming Fan authored
This is the initial codec driver for rt711 SDCA version. Signed-off-by:
-
