Noticed by Rafał Miłecki on dri-devel.  On r6xx/r7xx hardware, laptop
panels can be driven by KLDSCP_LVTMA or UNIPHY.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The line mux for the connector in the bios tables
is used for enumerating drm connectors.  Since
this laptop has a quirk where the same line much is
listed for both VGA and LVDS, the connectors get
combined.  Setting the line mux on LVDS to an unused
value prevents both encoders from being combined into
the same connector.  This should fix bko bug 13720.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

A bug caused a new caching state to be selected on each buffer object
validation regardless of the current caching state.
Moreover, a caching state could be selected that wasn't supported by
the memory type.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Userspace sends us a special relocation type to sync video/exa
to vlines to avoid tearing, this deals with the relocation
in the kernel, it picks the correct crtc and avoids issues
where crtcs are disabled.

This version also parses the wait until to make sure it isn't
trying to do anything evil.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Normally we are free to place VRAM where we want in the GPUs
memory address space, however on IGP chips the VRAM is actual RAM,
and no special translation or aperture is used inside the GPU MC.

So when you move the VRAM aperture away from the TOM register,
you actually move it into main memory and can trash things quite badly.

This commit makes the code respect the TOM location for MC_FB_LOCATION.
Signed-off-by: Dave Airlie <airlied@redhat.com>

The crtc and cursor offsets on the legacy chips are offset from
DISPLAY_BASE_ADDR. The code worked if display base addr was at 0,
but otherwise falls to pieces.
Signed-off-by: Dave Airlie <airlied@redhat.com>

If there is a problem then this is hiding it, we shouldn't
ever need to flush the IB. Either the buffers are:

WB - caching just works.
WC - no need to do explicit flush, the MB + readback will do it
Signed-off-by: Dave Airlie <airlied@redhat.com>

Unsigned long is incorrect for 64-bit resources on 32-bit hw.
Signed-off-by: Dave Airlie <airlied@redhat.com>

1. rv370 can accept 40-bit addresses - also at 24-bit shift not 4 bits
2. rs480 table can be in 40-bit space. - 4 bit shift for top 8 bits
3. rs480 table entries can be in 40-bit space.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Alex found that specjbb2005 still can not run with hugepages on an
x86-64 machine.  This only happens when numa is not compiled in.

The root cause: node_set_state will not set it back for us in that case,
so don't clear that when numa is not select in config

[ v2: use node_clear_state instead ]
Reported-and-Tested-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 5fd29d6c ("printk: clean up
handling of log-levels and newlines") changed printk semantics.  printk
lines with multiple KERN_<level> prefixes are no longer emitted as
before the patch.

<level> is now included in the output on each additional use.

Remove all uses of multiple KERN_<level>s in formats.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Move tty entries to tty not trivial. Noted by David Brownell.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This fixes the ppp problems and various other issues with call locking
caused by one side of a pty called in one locking context trying to match
another with differing rules on the other side. We also get a big slack
space to work with that means we can bury the flow control deadlock case
for any conceivable real world situation.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Powernow-k8: support family 0xf with 2 low p-states
  [CPUFREQ] fix (utter) cpufreq_add_dev mess
  [CPUFREQ] Cleanup locking in conservative governor
  [CPUFREQ] Cleanup locking in ondemand governor
  [CPUFREQ] Mark policy_rwsem as going static in cpufreq.c wont be exported
  [CPUFREQ] Eliminate the recent lockdep warnings in cpufreq

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6:
  quota: Fix possible deadlock during parallel quotaon and quotaoff

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: Clear -EAGAIN in dpm_prepare
  x86: Fix resume from suspend when CONFIG_CC_STACKPROTECTOR

After some API change, intel_iommu_unmap_range() introduced a assumption that
parameter size != 0, otherwise the dma_pte_clean_range() would have a
overflowed argument. But the user like KVM don't have this assumption before,
then some BUG() triggered.

Fix it by ignoring size = 0.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The f_dev in _request_firmware() is allocated via the fw_setup_device()
and fw_register_device() calls and its class set to firmware_class (the
class release function is fw_dev_release).

Commit 6acf70f0 replaced the kfree(dev) in fw_dev_release() with a
put_device() call but my understanding is that the release function is
called via put_device -> kobject_put -> kref_put -> koject_release etc.
and it should call kfree since it's the last to see this device
structure alive.

Because of that, the _request_firmware() function on its -ENOENT error
path only calls device_unregister(f_dev) which would eventually call
fw_dev_release() but there is no kfree (the subsequent put_device call
would just make the kref negative).
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 1c8542c7 replaced kmalloc() with memdup_user() in the write()
function but also dropped the kfree(temp). The memdup_user() function
allocates memory which is never freed.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Parag Warudkar <parag.warudkar@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: gpio_mouse - use standard driver registration method
  Input: mark serio and i8042 as suspended when hibernating too
  Input: add support for generic GPIO-based matrix keypad
  Input: arrange keyboards alphabetically
  Input: gpio-keys - avoid possibility of sleeping in timer function
  Input: gpio-keys - revert 'change timer to workqueue'
  Input: dm355evm_keys - fix kconfig symbol names
  Input: wacom - add DTF720a support and fix rotation on Intuos3
  Input: i8042 - more reset quirks for MSI Wind-clone netbooks

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Don't use alloc_bootmem() in init_IRQ() path
  powerpc: Fix spin_event_timeout() to be robust over context switches
  powerpc: Use pr_devel() in do_dcache_icache_coherency()
  powerpc/cell: Use pr_devel() in axon_msi.c
  powerpc: Use pr_devel() in arch/powerpc/mm/gup.c
  powerpc: Cleanup & use pr_devel() in arch/powerpc/mm/slb.c
  powerpc/perf_counter: Remove duplicated #include
  powerpc: Use pr_devel() in arch/powerpc/mm/mmu_context_nohash.c
  powerpc/pseries: Use pr_devel() in xics.c
  powerpc: Remove unnecessary semicolons
  powerpc/pseries: Use pr_devel() in pseries LPAR HPTE routines
  powerpc/44x: Fix build error with -Werror for Warp platform
  powerpc/4xx: Have Warp take advantage of GPIO LEDs default-state = keep
  powerpc/44x: Update Warp defconfig

Fix various silly problems wrt mnt_namespace.h:

 - exit_mnt_ns() isn't used, remove it
 - done that, sched.h and nsproxy.h inclusions aren't needed
 - mount.h inclusion was need for vfsmount_lock, but no longer
 - remove mnt_namespace.h inclusion from files which don't use anything
   from mnt_namespace.h
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'sh/for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  serial: sh-sci: fix sci interrupt handler
  video: hitfb: Move over to dev_pm_ops.
  video: hitfb: Convert to framebuffer_alloc().
  video: sh_mobile_lcdcfb: Convert to framebuffer_alloc().
  sh: add r8a66597 usb0 host to the se7724 board
  usb: allow sh7724 to enable on-chip r8a66597
  sh-sci: update receive error handling for muxed irqs
  sh: define PERF_COUNTER_INDEX_OFFSET.

This reverts commit 4148df9b.

Let's hope that the mm_lock initialization is now correct with all
drivers, following Krzysztof's patches.
Requested-by: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove redundant locking by the mm_lock mutex before a second head of
matrox framebuffer is registered.

This fixes a problem with uninitialized the fb_info->mm_lock mutex
introduced by the commit 537a1bf0 " fbdev: add mutex for fb_mmap
locking"
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove redundant call to the matroxfb_update_fix() before matrox
frambuffer is registered.

This fixes a problem with uninitialized the fb_info->mm_lock mutex
introduced by the commit 537a1bf0 " fbdev: add mutex for fb_mmap
locking"
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove redundant call to the w100fb_set_par() before w100 frambuffer is
registered.

This fixes a problem with uninitialized the fb_info->mm_lock mutex
introduced by the commit 537a1bf0 " fbdev: add mutex for fb_mmap
locking"
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove redundant locking of the fb_info->mm_lock mutex before the
frambuffer is registered.

This fixes a problem with uninitialized the fb_info->mm_lock mutex
introduced by the commit 537a1bf0 " fbdev: add mutex for fb_mmap
locking"
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove redundant call to the encode_fix() before i810 frambuffer is
registered.

This fixes a problem with uninitialized the fb_info->mm_lock mutex
introduced by the commit 537a1bf0 " fbdev: add mutex for fb_mmap
locking"
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit a65e7bfc broke the UML build with
the following error -

  In file included from fs/proc/kcore.c:17:
  include/linux/elfcore.h: In function 'elf_core_copy_task_regs':
  include/linux/elfcore.h:129: error: implicit declaration of function 'task_pt_regs'

Fix this by restoring the previous behavior of returning 0 for all arches
like UML that don't define task_pt_regs.
Signed-off-by: Parag Warudkar <parag.lkml@gmail.com>
Acked-by: Amerigo Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When the last device in the dpm list is unregistered directly after its
prepare() callback returned with -EAGAIN, the return code is passed to
the calling function, resulting in a suspend failure. Prevent this by
clearing the return code after -EAGAIN.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Patch 08687aec71bc9134fe336e561f6did877bacf74fc0a (x86: unify
power/cpu_(32|64).c)  renamed cpu_32.c to cpu.c, but did not update
the special compilation flags for the file for the new name.

This patch fixes the compilation flags, and therefore fixes resume
from suspend on my Acer Aspire One.

[rjw: The regression from 2.6.30 fixed by this patch is tracked as
 http://bugzilla.kernel.org/show_bug.cgi?id=13661]
Signed-off-by: Peter Chubb <peterc@nicta.com.au>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

This patch is needed when the gpio's became available only at late
stages, for example, when using i2c gpio expander.
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Serio ports are not being restarted any longer because resume operations
after hibernate do nothing, since the device has not been marked as
suspended. This happens because suspend is only considering the SUSPEND
event but not the FREEZE event.

Note that this driver has still to migrate to dev_pm_ops, but this fixes
this particular bug now.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

This patch fixes various badnesses like this for all interrupt
controllers:

------------[ cut here ]------------
Badness at c04db9dc [verbose debug info unavailable]
NIP: c04db9dc LR: c04db9ac CTR: 00000000
REGS: c053de30 TRAP: 0700   Not tainted  (2.6.31-rc1-00432-ge69b2b5-dirty)
MSR: 00021000 <ME,CE>  CR: 22020084  XER: 00000000
TASK = c0500480[0] 'swapper' THREAD: c053c000
GPR00: 00000001 c053dee0 c0500480 00000000 00000050 00000020 3fffffff 00000000
GPR08: 00000001 c0540000 e0080080 00000000 22000084 64183600 3ff8f800 00000000
GPR16: 841b0240 449a0303 00000000 00000000 00000000 00000000 00000000 c04f5bf4
GPR24: 00000000 00000000 00000000 00000050 00000020 00000000 3fffffff 00000050
NIP [c04db9dc] alloc_arch_preferred_bootmem+0x48/0x74
LR [c04db9ac] alloc_arch_preferred_bootmem+0x18/0x74
Call Trace:
[c053dee0] [c000a5a4] __of_address_to_resource+0x44/0xd0 (unreliable)
[c053def0] [c04dba58] ___alloc_bootmem_nopanic+0x50/0x108
[c053df20] [c04dbb28] ___alloc_bootmem+0x18/0x50
[c053df30] [c04d5de0] qe_ic_init+0x5c/0x1b0
[c053df70] [c04d77b0] mpc85xx_mds_pic_init+0xb8/0x10c
[c053dfb0] [c04cf374] init_IRQ+0x28/0x3c

p.s. commit 85355bb2 ("powerpc: Fix
mpic alloc warning") missed some alloc_bootmem() instances, this is
now fixed.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Current implementation of spin_event_timeout can be interrupted by an
IRQ or context switch after testing the condition, but before checking
the timeout.  This can cause the loop to report a timeout when the
condition actually became true in the middle.

This patch adds one final check of the condition upon exit of the loop
if the last test of the condition was still false.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   2036     368       8    2412     96c arch/powerpc/mm/pgtable.o

size after:
   text    data     bss     dec     hex filename
   1677     248       8    1933     78d arch/powerpc/mm/pgtable.o
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   7083    1616       0    8699    21fb arch/powerpc/../axon_msi.o

size after:
   text    data     bss     dec     hex filename
   5772    1208       0    6980    1b44 arch/powerpc/../axon_msi.o
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   3252     384       0    3636     e34 arch/powerpc/mm/gup.o

size after:
   text    data     bss     dec     hex filename
   2576      96       0    2672     a70 arch/powerpc/mm/gup.o
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>