- 25 May, 2015 40 commits
-
-
Richard Cochran authored
The funtions, cpsw_ale_flush and cpsw_ale_set_ageout, have never been used since they were first introduced. This patch removes the dead code. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Richard Cochran authored
Having the breaks too far to the left makes parsing the dense switch/case block unnecessarily harder. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Simon Horman says: ==================== rocker: unused parameter and const cleanups This series provides some minor though verbose cleanup of rocker. The second patch depends on the first though it could be rebased. I had previously asked for v2 to be put on hold while some bugs I had found in the rocker driver were shaken out. That has now happened and the bugs turned out to be unrelated. Accordingly I am reposting the series. * Changes v2 -> v3 - Rebase and update for new variables and parameters that may be const * Changes v1 -> v2 - Found quite a few more variables and parameters to make const ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Simon Horman authored
Mark parameters and local variables as const where possible. Signed-off-by:
Simon Horman <simon.horman@netronome.com> Acked-by:
Scott Feldman <sfeldma@gmail.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Simon Horman authored
Remove unused rocker_port parameter from rocker_port_kfree. Also remove the rocker_port parameter from callers of rocker_port_kfree where the parameter it is now unused. Signed-off-by:
Simon Horman <simon.horman@netronome.com> Acked-by:
Scott Feldman <sfeldma@gmail.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicholas Mc Guire authored
API compliance scanning with coccinelle flagged: ./net/irda/timer.c:63:35-37: use of msecs_to_jiffies probably perferable Converting milliseconds to jiffies by "val * HZ / 1000" technically is not a clean solution as it does not handle all corner cases correctly. By changing the conversion to use msecs_to_jiffies(val) conversion is correct in all cases. Further the () around the arithmetic expression was dropped. Patch was compile tested for x86_64_defconfig + CONFIG_IRDA=m Patch is against 4.1-rc4 (localversion-next is -next-20150522) Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joe Perches authored
These two uses seem to have had carriage returns removed. Make these entries like all the others in this file. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicholas Mc Guire authored
API compliance scanning with coccinelle flagged: Converting milliseconds to jiffies by "val * HZ / 1000" is technically is not a clean solution as it does not handle all corner cases correctly. By changing the conversion to use msecs_to_jiffies(val) conversion is correct in all cases. in the current code: mod_timer(&self->rx_defer_timer, jiffies + (10 * HZ / 1000)); for HZ < 100 (e.g. CONFIG_HZ == 64|32 in alpha) this effectively results in no delay at all. Patch was compile tested for x86_64_defconfig (implies CONFIG_USB_IRDA=m) Patch is against 4.1-rc4 (localversion-next is -next-20150522) Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Linus Lüssing authored
Network managers like netifd (used in OpenWRT for instance) try to configure interface options after creation but before setting the interface up. Unfortunately the sysfs / bridge currently only allows to configure the hash_max and multicast_router options when the bridge interface is up. But since br_multicast_init() doesn't start any timers and only sets default values and initializes timers it should be save to reconfigure the default values after that, before things actually get active after the bridge is set up. Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
since commit 6aafeef0 ("netfilter: push reasm skb through instead of original frag skbs") we will end up sometimes re-fragmenting skbs that we've reassembled. ipv6 defrag preserves the original skbs using the skb frag list, i.e. as long as the skb frag list is preserved there is no problem since we keep original geometry of fragments intact. However, in the rare case where the frag list is munged or skb is linearized, we might send larger fragments than what we originally received. A router in the path might then send packet-too-big errors even if sender never sent fragments exceeding the reported mtu: mtu 1500 - 1500:1400 - 1400:1280 - 1280 A R1 R2 B 1 - A sends to B, fragment size 1400 2 - R2 sends pkttoobig error for 1280 3 - A sends to B, fragment size 1280 4 - R2 sends pkttoobig error for 1280 again because it sees fragments of size 1400. make sure ip6_fragment always caps MTU at largest packet size seen when defragmented skb is forwarded. Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shailendra Verma authored
The variable irq_coalesce is bool type. So assign the value true instead of 1. Signed-off-by:
Shailendra Verma <shailendra.capricorn@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shailendra Verma authored
The variable separate_tx_rx_irq is bool type so assigning true instead of 1. Signed-off-by:
Shailendra Verma <shailendra.capricorn@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Martin KaFai Lau says: ==================== ipv6: Only create RTF_CACHE route after encountering pmtu exception v4 -> v5: - Patch 1 is new. Clean up the ipv6_select_ident() and ip6_fragment(). - Further simplify the newly added rt6_get_pcpu_route(). If there is a 'prev' after cmpxchg, return prev instead of the newly created percpu clone. v3 -> v4: - Patch 8 is new. It keeps track of the DST_NOCACHE routes in a list to handle the iface down/unregister event. - Remove rcu from the newly added rt6i_pcpu variable. It is not needed because it has already been protected by the existing reader/writer lock. - Thanks to 'Julian Anastasov <ja@ssi.bg>' for testing the FLOWI_FLAG_KNOWN_NH patches. v2 -> v3: - Patch 5 to 7 are new. They take care of cases where the daddr in skb is not the one used to do the route look-up. There is also related changes to rt6_nexthop() since v2 which is in patch 2/9. Thanks to 'Julian Anastasov <ja@ssi.bg>' for pointing it out. - Fix a few problems in __ip6_rt_update_pmtu(), like setting the expire and mtu before inserting to the tree and don't do dst_destroy() after tree insertion failure. Also update the rt6i_pmtu in fib6_add_rt2node(). Thanks to 'Steffen Klassert <steffen.klassert@secunet.com>' for pointing it out. - Merge ip6_pmtu_rt_cache_alloc() into ip6_rt_cache_alloc(). v1 -> v2: - Move the /128 route bug fixes to another series (accepted). - Create a function for checking (rt6i_flags & (RTF_NONEXTHOP | RTF_GATEWAY)). - Avoid shuffling the skb network_header. Instead, change the function signature to take iph instead of skb. - Many Thanks to 'Hannes Frederic Sowa <hannes@stressinduktion.org>' on reviewing v1 and v2 and giving advice. --Martin ~~~ start: v1 compose message (with the out-dated parts removed) ~~~ This series is to avoid creating a RTF_CACHE route whenever we are consulting the fib6 tree with a new destination. Instead, only create RTF_CACHE route when we see a pmtu exception. Out of all ipv6 RTF_CACHE routes that are created, the percentage that has a different mtu is very small. In one of our end-user facing proxy server, only 1k out of 80k RTF_CACHE routes have a smaller MTU. For our DC traffic, there is no mtu exception. A large fib6 tree has problems like, 'ip -6 r show' takes a long time. gc may kick in too often. Also, when a service has restarted and a lot of new TCP conn requests come in, it creates pressure on the tree by inserting a lot of RTF_CACHE in a short time and it currently requires a write lock to do that. The first few patches are prep works to remove assumption that the returned rt is always RTF_CACHE. The patch 'ipv6: Only create RTF_CACHE routes after encountering pmtu exception' do the lazy RTF_CACHE route creation. The following patches added percpu rt to compensate the performance loss after doing the RTF_CACHE lazy creation. Here is some numbers of the udpflood test. The udpflood has been slightly modified to have a time limit instead of count limit. A /64 via gateway route is used for the test. Each udpflood uses 10000 dst addresses. The dst addresses of different udpflood processes do not overlap with each other. 1 16M 15M 10 61M 61M 20 65M 62M 40 88M 83M ~~~ end: v1 compose message ~~~ ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
After the patch 'ipv6: Only create RTF_CACHE routes after encountering pmtu exception', we need to compensate the performance hit (bouncing dst->__refcnt). Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
This patch breaks up ip6_rt_copy() into ip6_rt_copy_init() and ip6_rt_cache_alloc(). In the later patch, we need to create a percpu rt6_info copy. Hence, refactor the common rt6_info init codes to ip6_rt_copy_init(). Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
This patch keeps track of the DST_NOCACHE routes in a list and replaces its dev with loopback during the iface down/unregister event. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
This patch always creates RTF_CACHE clone with DST_NOCACHE when FLOWI_FLAG_KNOWN_NH is set so that the rt6i_dst is set to the fl6->daddr. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Tested-by:
Julian Anastasov <ja@ssi.bg> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
The neighbor look-up used to depend on the rt6i_gateway (if there is a gateway) or the rt6i_dst (if it is a RTF_CACHE clone) as the nexthop address. Note that rt6i_dst is set to fl6->daddr for the RTF_CACHE clone where fl6->daddr is the one used to do the route look-up. Now, we only create RTF_CACHE clone after encountering exception. When doing the neighbor look-up with a route that is neither a gateway nor a RTF_CACHE clone, the daddr in skb will be used as the nexthop. In some cases, the daddr in skb is not the one used to do the route look-up. One example is in ip_vs_dr_xmit_v6() where the real nexthop server address is different from the one in the skb. This patch is going to follow the IPv4 approach and ask the ip6_pol_route() callers to set the FLOWI_FLAG_KNOWN_NH properly. In the next patch, ip6_pol_route() will honor the FLOWI_FLAG_KNOWN_NH and create a RTF_CACHE clone. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Tested-by:
Julian Anastasov <ja@ssi.bg> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
Instead of doing the rt6->rt6i_node check whenever we need to get the route's cookie. Refactor it into rt6_get_cookie(). It is a prep work to handle FLOWI_FLAG_KNOWN_NH and also percpu rt6_info later. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
This patch creates a RTF_CACHE routes only after encountering a pmtu exception. After ip6_rt_update_pmtu() has inserted the RTF_CACHE route to the fib6 tree, the rt->rt6i_node->fn_sernum is bumped which will fail the ip6_dst_check() and trigger a relookup. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
A prep work for creating RTF_CACHE on exception only. After this patch, the same condition (rt->rt6i_flags & (RTF_NONEXTHOP | RTF_GATEWAY)) is checked twice. This redundancy will be removed in the later patch. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
When creating a RTF_CACHE route, RTF_ANYCAST is set based on rt6i_dst. Also, rt6i_gateway is always set to the nexthop while the nexthop could be a gateway or the rt6i_dst.addr. After removing the rt6i_dst and rt6i_src dependency in the last patch, we also need to stop the caller from depending on rt6i_gateway and RTF_ANYCAST. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
This patch removes the assumptions that the returned rt is always a RTF_CACHE entry with the rt6i_dst and rt6i_src containing the destination and source address. The dst and src can be recovered from the calling site. We may consider to rename (rt6i_dst, rt6i_src) to (rt6i_key_dst, rt6i_key_src) later. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Reviewed-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
This patch changes the ipv6_select_ident() signature to return a fragment id instead of taking a whole frag_hdr as a param to only set the frag_hdr->identification. It also cleans up ip6_fragment() to obtain the fragment id at the beginning instead of using multiple "if" later to check fragment id has been generated or not. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Add support for flashing 10GBaseT adapter with BCM 84834 PHY and Aquantia AQ1202 PHY. Updating of the PHY firmware must happen before the INITIALIZE_CMD. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Add two more eBPF test cases for JITs, i.e. the second one revealed a bug in the x86_64 JIT compiler, where only an int3 filled image from the allocator was emitted and later wrongly set by the compiler as the bpf_func program code since optimization pass boundary was surpassed w/o actually emitting opcodes. Interpreter: [ 45.782892] test_bpf: #242 BPF_MAXINSNS: Very long jump backwards jited:0 11 PASS [ 45.783062] test_bpf: #243 BPF_MAXINSNS: Edge hopping nuthouse jited:0 14705 PASS After x86_64 JIT (fixed): [ 80.495638] test_bpf: #242 BPF_MAXINSNS: Very long jump backwards jited:1 6 PASS [ 80.495957] test_bpf: #243 BPF_MAXINSNS: Edge hopping nuthouse jited:1 17157 PASS Reference: http://thread.gmane.org/gmane.linux.network/364729Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tom Lendacky says: ==================== amd-xgbe: AMD XGBE driver updates 2015-05-22 The following patches are included in this driver update series: - Retrieve and set an additional hardware feature setting - Fix the initial mode/speed determination when auto-negotiation is disabled - Add additional netif_dbg support to the driver This patch series is based on net-next. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
Change more netdev_dbg statements over to netif_dbg and add some new netif_dbg statements to the driver. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
When the ethtool command is used to set the speed of the device while the device is down, the check to set the initial mode may fail when the device is brought up, causing failure to bring the device up. Update the code to set the initial mode based on the desired speed if auto-negotiation is disabled. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
The device private data structure contains all the defined hardware features for the device. However one of the features is not set. Even though the feature is not currently used, set it to avoid future issues of the feature being checked thinking it has been properly set. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
Send icmp pmtu error if we find that the largest fragment of df-skb exceeded the output path mtu. The ip output path will still catch this later on but we can avoid the forward/postrouting hook traversal by rejecting right away. This is what ipv6 already does. Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hannes Frederic Sowa says: ==================== net: af_unix: zerocopy stream bits This series implements zerocopy support for AF_UNIX SOCK_STREAM sockets. Changelog in the specific patches. Thanks to all the reviewers! ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
unix_stream_recvmsg is refactored to unix_stream_read_generic in this patch and enhanced to deal with pipe splicing. The refactoring is inneglible, we mostly have to deal with a non-existing struct msghdr argument. Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
Prepare skb_splice_bits to be able to deal with AF_UNIX sockets. AF_UNIX sockets don't use lock_sock/release_sock and thus we have to use a callback to make the locking and unlocking configureable. Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
This patch implements sendpage support for AF_UNIX SOCK_STREAM sockets. This is also required for a complete splice implementation. The implementation is a bit tricky because we append to already existing skbs and so have to hold unix_sk->readlock to protect the reading side from either advancing UNIXCB.consumed or freeing the skb at the socket receive tail. Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2015-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== ath10k: * enable channel 144 on 5 GHz * enable Adaptive Noise Immunity (ANI) by default * add Wake on Wireless LAN (WOW) patterns support * add basic Tunneled Direct Link Setup (TDLS) support * add multi-channel support for QCA6174 * enable IBSS RSN support * enable Bluetooth Coexistance whenever firmware supports it * add more versatile way to set bitrates used by the firmware ath9k: * spectral scan: add support for multiple FFT frames per report iwlwifi: * major rework of the scan code (Luca) * some work on the thermal code (Chaya Rachel) * some work on the firwmare debugging infrastructure brcmfmac: * SDIO suspend and resume fixes * wiphy band info and changes in regulatory settings * add support for BCM4324 SDIO and BCM4358 PCIe * enable support of PCIe devices on router platforms (Hante) ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Or Gerlitz says: ==================== mlx4: Enable single ported VFs over IB ports This series further enhances the support for mlx4 single ported VFs introduced in 3.15 to work over IB ports too. Just as quick reminder, the ConnectX3 device family exposes one PCI device which serves both ports. This can be non-optimal under virtualization schemes where the admin would like the VF to expose one interface to the VM, etc. Since all the VF interaction with the firmware passes through the PF driver, we can emulate to the VF they have one port, and further create a set of the VFs which act on port1 of the device and another set which acts on port2. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Or Gerlitz authored
Remove the limitation that disallows configuring single ported VFs in the presence of IB ports, after addressing the issues that prevented that to work. SMI (QP0) requests/responses are still not supported for single ported IB VFs. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Or Gerlitz authored
It's legal for drivers to provide the QP port through the QPC schedule-queue field on the reset-to-init QP state change. Add adjusting of the schedule queue port in the SRIOV wrapper for that operation too. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
David S. Miller <davem@davemloft.net>
-