- 01 May, 2018 40 commits
-
-
Joakim Tjernlund authored
commit 46a16a22 upstream. Some Micron chips does not work well wrt Erase suspend for boot blocks. This avoids the issue by not allowing Erase suspend for the boot blocks for the 28F00AP30(1GBit) chip. Signed-off-by:
Joakim Tjernlund <joakim.tjernlund@infinera.com> Cc: <stable@vger.kernel.org> Reviewed-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joakim Tjernlund authored
commit 6510bbc8 upstream. Currently it is possible to read and/or write to suspend EB's. Writing /dev/mtdX or /dev/mtdblockX from several processes may break the flash state machine. Signed-off-by:
-
Thor Thayer authored
commit 47016b34 upstream. The current Cadence QSPI driver caused a kernel panic when loading a Root Filesystem from QSPI. The problem was caused by reading more bytes than needed because the QSPI operated on 4 bytes at a time. <snip> [ 7.947754] spi_nor_read[1048]:from 0x037cad74, len 1 [bfe07fff] [ 7.956247] cqspi_read[910]:offset 0x58502516, buffer=bfe07fff [ 7.956247] [ 7.966046] Unable to handle kernel paging request at virtual address bfe08002 [ 7.973239] pgd = eebfc000 [ 7.975931] [bfe08002] *pgd=2fffb811, *pte=00000000, *ppte=00000000 </snip> Notice above how only 1 byte needed to be read but by reading 4 bytes into the end of a mapped page, an unrecoverable page fault occurred. This patch uses a temporary buffer to hold the 4 bytes read and then copies only the bytes required into the buffer. A min() function is used to limit the length to prevent buffer overflows. Request testing of this patch on other platforms. This was tested on the Intel Arria10 SoCFPGA DevKit. Fixes: 0cf17256 ("mtd: spi-nor: cqspi: Fix build on arches missing readsl/writesl") Signed-off-by:
Thor Thayer <thor.thayer@linux.intel.com> Cc: <stable@vger.kernel.org> Reviewed-by:
Marek Vasut <marek.vasut@gmail.com> Signed-off-by:
-
Kailang Yang authored
commit 65811834 upstream. On this Lenovo ThinkCentre machine. There are two front mics, we change the location for one of them. Relation: f33f79f3 ("ALSA: hda/realtek - change the location for one of two front microphones") Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kailang Yang authored
commit ab3b8e51 upstream. Add ALC255 its own depop functions for alc_init and alc_shutup. Assign it to ALC256 usage. Signed-off-by:
-
Kailang Yang authored
commit ea04a1db upstream. Fill COEF to change EAPD to verb control. Assigned codec type. This is an additional fix over 92f974df ("ALSA: hda/realtek - New vendor ID for ALC233"). [ More notes: according to Kailang, the chip is 10ec:0235 bonding for ALC233b, which is equivalent with ALC255. It's only used for Lenovo. The chip needs no alc_process_coef_fw() for headset unlike ALC255. ] Signed-off-by:
-
Takashi Iwai authored
commit 69fa6f19 upstream. As recently Smatch suggested, one place in HD-audio hwdep ioctl codes may expand the array directly from the user-space value with speculation: sound/pci/hda/hda_local.h:467 get_wcaps() warn: potential spectre issue 'codec->wcaps' As get_wcaps() itself is a fairly frequently called inline function, and there is only one single call with a user-space value, we replace only the latter one to open-code locally with array_index_nospec() hardening in this patch. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 8d218dd8 upstream. As Smatch recently suggested, a few places in OSS sequencer codes may expand the array directly from the user-space value with speculation, namely there are a significant amount of references to either info->ch[] or dp->synths[] array: sound/core/seq/oss/seq_oss_event.c:315 note_on_event() warn: potential spectre issue 'info->ch' (local cap) sound/core/seq/oss/seq_oss_event.c:362 note_off_event() warn: potential spectre issue 'info->ch' (local cap) sound/core/seq/oss/seq_oss_synth.c:470 snd_seq_oss_synth_load_patch() warn: potential spectre issue 'dp->synths' (local cap) sound/core/seq/oss/seq_oss_event.c:293 note_on_event() warn: potential spectre issue 'dp->synths' sound/core/seq/oss/seq_oss_event.c:353 note_off_event() warn: potential spectre issue 'dp->synths' sound/core/seq/oss/seq_oss_synth.c:506 snd_seq_oss_synth_sysex() warn: potential spectre issue 'dp->synths' sound/core/seq/oss/seq_oss_synth.c:580 snd_seq_oss_synth_ioctl() warn: potential spectre issue 'dp->synths' Although all these seem doing only the first load without further reference, we may want to stay in a safer side, so hardening with array_index_nospec() would still make sense. We may put array_index_nospec() at each place, but here we take a different approach: - For dp->synths[], change the helpers to retrieve seq_oss_synthinfo pointer directly instead of the array expansion at each place - For info->ch[], harden in a normal way, as there are only a couple of places As a result, the existing helper, snd_seq_oss_synth_is_valid() is replaced with snd_seq_oss_synth_info(). Also, we cover MIDI device where a similar array expansion is done, too, although it wasn't reported by Smatch. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2Reported-by:
-
Takashi Iwai authored
commit f5e94b4c upstream. When get_synthdev() is called for a MIDI device, it returns the fixed midi_synth_dev without the use refcounting. OTOH, the caller is supposed to unreference unconditionally after the usage, so this would lead to unbalanced refcount. This patch corrects the behavior and keep up the refcount balance also for the MIDI synth device. Cc: <stable@vger.kernel.org> Signed-off-by:
-
David Henningsson authored
commit f853dcaa upstream. It looks like a simple mistake that this struct member was forgotten. Audio_tstamp isn't used much, and on some archs (such as x86) this ioctl is not used by default, so that might be the reason why this has slipped for so long. Fixes: 4eeaaeae ("ALSA: core: add hooks for audio timestamps") Signed-off-by:
David Henningsson <diwic@ubuntu.com> Reviewed-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by:
-
Jeffery Miller authored
commit 912e4c33 upstream. The commit c2c86a97 ("ALSA: pcm: Remove set_fs() in PCM core code") changed SNDRV_PCM_IOCTL_DELAY to return an inconsistent error instead of a negative delay. Originally the call would succeed and return the negative delay. The Chromium OS Audio Server (CRAS) gets confused and hangs when the error is returned instead of the negative delay. Help CRAS avoid the issue by rolling back the behavior to return a negative delay instead of an error. Fixes: c2c86a97 ("ALSA: pcm: Remove set_fs() in PCM core code") Signed-off-by:
Jeffery Miller <jmiller@neverware.com> Cc: <stable@vger.kernel.org> # v4.13+ Signed-off-by:
-
Takashi Iwai authored
commit 088e861e upstream. As recently Smatch suggested, a few places in ALSA control core codes may expand the array directly from the user-space value with speculation: sound/core/control.c:1003 snd_ctl_elem_lock() warn: potential spectre issue 'kctl->vd' sound/core/control.c:1031 snd_ctl_elem_unlock() warn: potential spectre issue 'kctl->vd' sound/core/control.c:844 snd_ctl_elem_info() warn: potential spectre issue 'kctl->vd' sound/core/control.c:891 snd_ctl_elem_read() warn: potential spectre issue 'kctl->vd' sound/core/control.c:939 snd_ctl_elem_write() warn: potential spectre issue 'kctl->vd' Although all these seem doing only the first load without further reference, we may want to stay in a safer side, so hardening with array_index_nospec() would still make sense. In this patch, we put array_index_nospec() to the common snd_ctl_get_ioff*() helpers instead of each caller. These helpers are also referred from some drivers, too, and basically all usages are to calculate the array index from the user-space value, hence it's better to cover there. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2Reported-by:
-
Takashi Iwai authored
commit f526afcd upstream. As recently Smatch suggested, one place in RME9652 driver may expand the array directly from the user-space value with speculation: sound/pci/rme9652/rme9652.c:2074 snd_rme9652_channel_info() warn: potential spectre issue 'rme9652->channel_map' (local cap) This patch puts array_index_nospec() for hardening against it. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2Reported-by:
-
Takashi Iwai authored
commit 10513142 upstream. As recently Smatch suggested, a couple of places in HDSP MADI driver may expand the array directly from the user-space value with speculation: sound/pci/rme9652/hdspm.c:5717 snd_hdspm_channel_info() warn: potential spectre issue 'hdspm->channel_map_out' (local cap) sound/pci/rme9652/hdspm.c:5734 snd_hdspm_channel_info() warn: potential spectre issue 'hdspm->channel_map_in' (local cap) This patch puts array_index_nospec() for hardening against them. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2Reported-by:
-
Takashi Iwai authored
commit f9d94b57 upstream. As recently Smatch suggested, a couple of places in ASIHPI driver may expand the array directly from the user-space value with speculation: sound/pci/asihpi/hpimsginit.c:70 hpi_init_response() warn: potential spectre issue 'res_size' (local cap) sound/pci/asihpi/hpioctl.c:189 asihpi_hpi_ioctl() warn: potential spectre issue 'adapters' This patch puts array_index_nospec() for hardening against them. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2Reported-by:
-
Takashi Iwai authored
commit 7f054a5b upstream. As recently Smatch suggested, one place in OPL3 driver may expand the array directly from the user-space value with speculation: sound/drivers/opl3/opl3_synth.c:476 snd_opl3_set_voice() warn: potential spectre issue 'snd_opl3_regmap' This patch puts array_index_nospec() for hardening against it. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2Reported-by:
-
Takashi Iwai authored
commit 8a7d6003 upstream. When CONFIG_SND_DYNAMIC_MINORS isn't set, there are only limited number of devices available, and HD-audio, especially with HDMI/DP codec, will fail to create more than two devices. The driver warns about the lack of such devices and skips the PCM device creations, but the HDMI driver still tries to create the corresponding JACK, SPDIF and ELD controls even for the non-existing PCM substreams. This results in confusion on user-space, and even may break the operation. Similarly, Intel HDMI/DP codec builds the ELD notification from i915 graphics driver, and this may be broken if a notification is sent for the non-existing PCM stream. This patch adds the check of the existence of the assigned PCM substream in the both scenarios above, and skips the further operation if the PCM substream is not assigned. Fixes: 9152085d ("ALSA: hda - add DP MST audio support") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Sakamoto authored
commit 0f925660 upstream. In error path of snd_dice_stream_init_duplex(), stream data for incoming packet can be left to be initialized. This commit fixes it. Fixes: 436b5abe ('ALSA: dice: handle whole available isochronous streams') Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by:
-
Takashi Sakamoto authored
commit 10412c42 upstream. OUI for TC Electronic is 0x000166, for TC GROUP A/S. 0x001486 is for Echo Digital Audio Corporation. Fixes: 7cafc65b ('ALSA: dice: force to add two pcm devices for listed models') Cc: <stable@vger.kernel.org> # v4.6+ Reference: http://standards-oui.ieee.org/oui/oui.txtSigned-off-by:
-
Tetsuo Handa authored
commit bcdd0ca8 upstream. syzbot is reporting crashes triggered by memory allocation fault injection at tty_ldisc_get() [1]. As an attempt to handle OOM in a graceful way, we have tried commit 5362544b ("tty: don't panic on OOM in tty_set_ldisc()"). But we reverted that attempt by commit a8983d01 ("Revert "tty: don't panic on OOM in tty_set_ldisc()"") due to reproducible crash. We should spend resource for finding and fixing race condition bugs rather than complicate error paths for 2 * sizeof(void *) bytes allocation failure. [1] https://syzkaller.appspot.com/bug?id=489d33fa386453859ead58ff5171d43772b13aa3Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
syzbot <syzbot+40b7287c2dc987c48c81@syzkaller.appspotmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Tetsuo Handa authored
commit 598c2d41 upstream. syzbot is reporting crashes [1] triggered by memory allocation failure at tty_ldisc_get() from tty_ldisc_restore(). While syzbot stops at WARN_ON() due to panic_on_warn == true, panic_on_warn == false will after all trigger an OOPS by dereferencing old->ops->num if IS_ERR(old) == true. We can simplify tty_ldisc_restore() as three calls (old->ops->num, N_TTY, N_NULL) to tty_ldisc_failto() in addition to avoiding possible error pointer dereference. If someone reports kernel panic triggered by forcing all memory allocations for tty_ldisc_restore() to fail, we can consider adding __GFP_NOFAIL for tty_ldisc_restore() case. [1] https://syzkaller.appspot.com/bug?id=6ac359c61e71d22e06db7f8f88243feb11d927e7 Reported-by: syzbot+40b7287c2dc987c48c81@syzkaller.appspotmail.com Signed-off-by:
-
Tony Lindgren authored
commit b2d89ad9 upstream. At least on droid 4 with control channel in ADM mode, there is no response to Modem Status Command (MSC). Currently gsmtty_modem_update() expects to have data in dlci->modem_rx unless debug & 2 is set. This means that on droid 4, things only work if debug & 2 is set. Let's fix the issue by ignoring empty dlci->modem_rx for ADM mode. In the AMD mode, CMD_MSC will never respond and gsm_process_modem() won't get called to set dlci->modem_rx. And according to ts_127010v140000p.pdf, MSC is only relevant if basic option is chosen, so let's test for that too. Fixes: ea3d8465 ("tty: n_gsm: Allow ADM response in addition to UA for control dlci") Cc: linux-serial@vger.kernel.org Cc: Alan Cox <alan@llwyncelyn.cymru> Cc: Dan Williams <dcbw@redhat.com> Cc: Jiri Prchal <jiri.prchal@aksignal.cz> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Nazzareno Trimarchi <michael@amarulasolutions.com> Cc: Michael Scott <michael.scott@linaro.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Russ Gorby <russ.gorby@intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Tony Lindgren authored
commit e9ec2254 upstream. Commit ea3d8465 ("tty: n_gsm: Allow ADM response in addition to UA for control dlci") added support for DLCI to stay in Asynchronous Disconnected Mode (ADM). But we still get long delays waiting for commands to other DLCI to complete: --> 5) C: SABM(P) Q> 0) C: UIH(F) Q> 0) C: UIH(F) Q> 0) C: UIH(F) ... This happens because gsm_control_send() sets cretries timer to T2 that is by default set to 34. This will cause resend for T2 times for the control frame. In ADM mode, we will never get a response so the control frame, so retries are just delaying all the commands. Let's fix the issue by setting DLCI_MODE_ADM flag after detecting the ADM mode for the control DLCI. Then we can use that in gsm_control_send() to set retries to 1. This means the control frame will be sent once allowing the other end at an opportunity to switch from ADM to ABM mode. Note that retries will be decremented in gsm_control_retransmit() so we don't want to set it to 0 here. Fixes: ea3d8465 ("tty: n_gsm: Allow ADM response in addition to UA for control dlci") Cc: linux-serial@vger.kernel.org Cc: Alan Cox <alan@llwyncelyn.cymru> Cc: Dan Williams <dcbw@redhat.com> Cc: Jiri Prchal <jiri.prchal@aksignal.cz> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Nazzareno Trimarchi <michael@amarulasolutions.com> Cc: Michael Scott <michael.scott@linaro.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Russ Gorby <russ.gorby@intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Tetsuo Handa authored
commit 903f9db1 upstream. syzbot is reporting kernel panic [1] triggered by memory allocation failure at tty_ldisc_get() from tty_ldisc_init(). But since both tty_ldisc_get() and caller of tty_ldisc_init() can cleanly handle errors, tty_ldisc_init() does not need to call panic() when tty_ldisc_get() failed. [1] https://syzkaller.appspot.com/bug?id=883431818e036ae6a9981156a64b821110f39187Signed-off-by:
syzbot <syzkaller@googlegroups.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Gerd Hoffmann authored
commit d02d2700 upstream. Wait until we have enough space in the virt queue to actually queue up our request. Avoids the guest spinning in case we have a non-zero amount of free entries but not enough for the request. Cc: stable@vger.kernel.org Reported-by:
Alain Magloire <amagloire@blackberry.com> Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Dave Airlie <airlied@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180403095904.11152-1-kraxel@redhat.comSigned-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Michael S. Tsirkin authored
commit 5c60300d upstream. When out of memory and we can't add ctrl vq buffers, probe fails. Unfortunately the error handling is out of spec: it calls del_vqs without bothering to reset the device first. To fix, call the full cleanup function in this case. Cc: stable@vger.kernel.org Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Michael S. Tsirkin authored
commit aa44ec86 upstream. Will make it reusable for error handling. Cc: stable@vger.kernel.org Signed-off-by:
-
Michael S. Tsirkin authored
commit 61a8950c upstream. We now cleanup all VQs on device removal - no need to handle the control VQ specially. Cc: stable@vger.kernel.org Signed-off-by:
-
Michael S. Tsirkin authored
commit a7a69ec0 upstream. Console driver is out of spec. The spec says: A driver MUST NOT decrement the available idx on a live virtqueue (ie. there is no way to “unexpose” buffers). and it does exactly that by trying to detach unused buffers without doing a device reset first. Defer detaching the buffers until device unplug. Of course this means we might get an interrupt for a vq without an attached port now. Handle that by discarding the consumed buffer. Reported-by:
Tiwei Bie <tiwei.bie@intel.com> Fixes: b3258ff1 ("virtio: Decrement avail idx on buffer detach") Cc: stable@vger.kernel.org Signed-off-by:
-
Michael S. Tsirkin authored
commit 2855b335 upstream. an allocated buffer doesn't need to be tied to a vq - only vq->vdev is ever used. Pass the function the just what it needs - the vdev. Cc: stable@vger.kernel.org Signed-off-by:
-
Michael S. Tsirkin authored
commit 24a7e4d2 upstream. For cleanup it's helpful to be able to simply scan all vqs and discard all data. Add an iterator to do that. Cc: stable@vger.kernel.org Signed-off-by:
-
Takashi Iwai authored
commit 1d8d6428 upstream. The Dell Dock USB-audio device with 0bda:4014 is behaving notoriously bad, and we have already applied some workaround to avoid the firmware hiccup. Yet we still need to skip one thing, the Extension Unit at ID 4, which doesn't react correctly to the mixer ctl access. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1090658 Cc: <stable@vger.kernel.org> Signed-off-by:
-
Ravi Chandra Sadineni authored
commit 83a62c51 upstream. On chromebooks we depend on wakeup count to identify the wakeup source. But currently USB devices do not increment the wakeup count when they trigger the remote wake. This patch addresses the same. Resume condition is reported differently on USB 2.0 and USB 3.0 devices. On USB 2.0 devices, a wake capable device, if wake enabled, drives resume signal to indicate a remote wake (USB 2.0 spec section 7.1.7.7). The upstream facing port then sets C_PORT_SUSPEND bit and reports a port change event (USB 2.0 spec section 11.24.2.7.2.3). Thus if a port has resumed before driving the resume signal from the host and C_PORT_SUSPEND is set, then the device attached to the given port might be the reason for the last system wakeup. Increment the wakeup count for the same. On USB 3.0 devices, a function may signal that it wants to exit from device suspend by sending a Function Wake Device Notification to the host (USB3.0 spec section 8.5.6.4) Thus on receiving the Function Wake, increment the wakeup count. Signed-off-by:
Ravi Chandra Sadineni <ravisadineni@chromium.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Kamil Lulko authored
commit 3180dabe upstream. Add DELAY_INIT quirk to fix the following problem with HP v222w 16GB Mini: usb 1-3: unable to read config index 0 descriptor/start: -110 usb 1-3: can't read configurations, error -110 usb 1-3: can't set config #1, error -110 Signed-off-by:
Kamil Lulko <kamilx.lulko@intel.com> Signed-off-by:
Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Heikki Krogerus authored
commit b1b59e16 upstream. On some boards, under heavy load, the EC firmware is unable to complete commands even in one second. Increasing the command completion timeout value to five seconds. Reported-by:
Quanxian Wang <quanxian.wang@intel.com> Fixes: c1b0bc2d ("usb: typec: Add support for UCSI interface") Cc: <stable@vger.kernel.org> Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Kyle Roeschley authored
commit 1e23aace upstream. Added the USB VID and PID for the USB serial console on some National Instruments devices. Signed-off-by:
Kyle Roeschley <kyle.roeschley@ni.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Vasyl Vavrychuk authored
commit 470b5d6f upstream. Arrow USB Blaster integrated on MAX1000 board uses the same vendor ID (0x0403) and product ID (0x6010) as the "original" FTDI device. This patch avoids picking up by ftdi_sio of the first interface of this USB device. After that this device can be used by Arrow user-space JTAG driver. Signed-off-by:
Vasyl Vavrychuk <vvavrychuk@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Collin May authored
commit fe710508 upstream. Add simple driver for libtransistor USB console. This device is implemented in software: https://github.com/reswitched/libtransistor/blob/development/lib/usb_serial.cSigned-off-by:
Collin May <collin@collinswebsite.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Kai-Heng Feng authored
commit 621faf4f upstream. The Dell Inspiron 5775 is a Raven Ridge. The Enable Slot command timed out when a USB device gets plugged: [ 212.156326] xhci_hcd 0000:03:00.3: Error while assigning device slot ID [ 212.156340] xhci_hcd 0000:03:00.3: Max number of devices this xHCI host supports is 64. [ 212.156348] usb usb2-port3: couldn't allocate usb_device AMD suggests that a delay before xHC suspends can fix the issue. I can confirm it fixes the issue, so use the suspend delay quirk for Raven Ridge's xHC. Cc: stable@vger.kernel.org Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit c20f53c5 upstream. This reverts commit b07c1251 It is incomplete and causes hangs on devices when shutting down. It needs a much more "complete" fix in order to work properly. As that fix has not been merged, revert this patch for now before it causes any more problems. Cc: Greg Hackmann <ghackmann@google.com> Cc: Adam Wallis <awallis@codeaurora.org> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
