- 20 Jan, 2022 10 commits
-
-
kernel test robot authored
arch/riscv/mm/init.c:48:11-16: WARNING: conversion to bool not needed here Remove unneeded conversion to bool Semantic patch information: Relational and logical operators evaluate to bool, explicit conversion is overly verbose and unneeded. Generated by: scripts/coccinelle/misc/boolconv.cocci Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Palmer Dabbelt <palmer@rivosinc.com>
-
Palmer Dabbelt authored
This patchset allows to have a single kernel for sv39 and sv48 without being relocatable. The idea comes from Arnd Bergmann who suggested to do the same as x86, that is mapping the kernel to the end of the address space, which allows the kernel to be linked at the same address for both sv39 and sv48 and then does not require to be relocated at runtime. This implements sv48 support at runtime. The kernel will try to boot with 4-level page table and will fallback to 3-level if the HW does not support it. Folding the 4th level into a 3-level page table has almost no cost at runtime. Note that kasan region had to be moved to the end of the address space since its location must be known at compile-time and then be valid for both sv39 and sv48 (and sv57 that is coming). * riscv-sv48-v3: riscv: Explicit comment about user virtual address space size riscv: Use pgtable_l4_enabled to output mmu_type in cpuinfo riscv: Implement sv48 support asm-generic: Prepare for riscv use of pud_alloc_one and pud_free riscv: Allow to dynamically define VA_BITS riscv: Introduce functions to switch pt_ops riscv: Split early kasan mapping to prepare sv48 introduction riscv: Move KASAN mapping next to the kernel mapping riscv: Get rid of MAXPHYSMEM configs Signed-off-by: -
Alexandre Ghiti authored
Define precisely the size of the user accessible virtual space size for sv32/39/48 mmu types and explain why the whole virtual address space is split into 2 equal chunks between kernel and user space. Signed-off-by:
Alexandre Ghiti <alexandre.ghiti@canonical.com> Reviewed-by:
Anup Patel <anup@brainfault.org> Reviewed-by:
Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by:
-
Alexandre Ghiti authored
Now that the mmu type is determined at runtime using SATP characteristic, use the global variable pgtable_l4_enabled to output mmu type of the processor through /proc/cpuinfo instead of relying on device tree infos. Signed-off-by:
-
Alexandre Ghiti authored
By adding a new 4th level of page table, give the possibility to 64bit kernel to address 2^48 bytes of virtual address: in practice, that offers 128TB of virtual address space to userspace and allows up to 64TB of physical memory. If the underlying hardware does not support sv48, we will automatically fallback to a standard 3-level page table by folding the new PUD level into PGDIR level. In order to detect HW capabilities at runtime, we use SATP feature that ignores writes with an unsupported mode. Signed-off-by:
-
Alexandre Ghiti authored
In the following commits, riscv will almost use the generic versions of pud_alloc_one and pud_free but an additional check is required since those functions are only relevant when using at least a 4-level page table, which will be determined at runtime on riscv. So move the content of those functions into other functions that riscv can use without duplicating code. Signed-off-by:
-
Alexandre Ghiti authored
With 4-level page table folding at runtime, we don't know at compile time the size of the virtual address space so we must set VA_BITS dynamically so that sparsemem reserves the right amount of memory for struct pages. Signed-off-by:
-
Alexandre Ghiti authored
This simply gathers the different pt_ops initialization in functions where a comment was added to explain why the page table operations must be changed along the boot process. Signed-off-by:
-
Alexandre Ghiti authored
Now that kasan shadow region is next to the kernel, for sv48, this region won't be aligned on PGDIR_SIZE and then when populating this region, we'll need to get down to lower levels of the page table. So instead of reimplementing the page table walk for the early population, take advantage of the existing functions used for the final population. Note that kasan swapper initialization must also be split since memblock is not initialized at this point and as the last PGD is shared with the kernel, we'd need to allocate a PUD so postpone the kasan final population after the kernel population is done. Signed-off-by:
-
Alexandre Ghiti authored
Now that KASAN_SHADOW_OFFSET is defined at compile time as a config, this value must remain constant whatever the size of the virtual address space, which is only possible by pushing this region at the end of the address space next to the kernel mapping. Signed-off-by:
-
- 19 Jan, 2022 11 commits
-
-
Alexandre Ghiti authored
CONFIG_MAXPHYSMEM_* are actually never used, even the nommu defconfigs selecting the MAXPHYSMEM_2GB had no effects on PAGE_OFFSET since it was preempted by !MMU case right before. In addition, the move of the kernel mapping at the end of the address space broke the use of MAXPHYSMEM_2G with MMU since it defines PAGE_OFFSET at the same address as the kernel mapping. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Fixes: 2bfc6cd8 ("riscv: Move kernel mapping outside of linear mapping") Signed-off-by:
Conor Dooley <Conor.Dooley@microchip.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Jisheng Zhang authored
eBPF's exception tables needs to be modified to relative synchronously. Suggested-by:
Tong Tiangen <tongtiangen@huawei.com> Signed-off-by:
Jisheng Zhang <jszhang@kernel.org> Fixes: 1f77ed94 ("riscv: switch to relative extable and other improvements") Signed-off-by:
-
Jisheng Zhang authored
Currently, the #ifdef CONFIG_XIP_KERNEL usage can be divided into the following three types: The first one is for functions/declarations only used in XIP case. The second one is for XIP_FIXUP case. Something as below: |foo_type foo; |#ifdef CONFIG_XIP_KERNEL |#define foo (*(foo_type *)XIP_FIXUP(&foo)) |#endif Usually, it's better to let the foo macro sit with the foo var together. But if various foos are defined adjacently, we can save some #ifdef CONFIG_XIP_KERNEL usage by grouping them together. The third one is for different implementations for XIP, usually, this is a #ifdef...#else...#endif case. This patch moves the pt_ops macro to adjacent #ifdef CONFIG_XIP_KERNEL and group first type usage cases into one. Signed-off-by:
Alexandre Ghiti <alex@ghiti.fr> Signed-off-by:
-
Jisheng Zhang authored
Try our best to replace the conditional compilation using "#ifdef CONFIG_XIP_KERNEL" with "IS_ENABLED(CONFIG_XIP_KERNEL)", to simplify the code and to increase compile coverage. Signed-off-by:
-
Jisheng Zhang authored
Except "pt_ops", other global vars when CONFIG_XIP_KERNEL=y is defined as below: |foo_type foo; |#ifdef CONFIG_XIP_KERNEL |#define foo (*(foo_type *)XIP_FIXUP(&foo)) |#endif Follow the same way for pt_ops to unify the style and to simplify code. Signed-off-by:
-
Jisheng Zhang authored
Try our best to replace the conditional compilation using "#ifdef CONFIG_64BIT" by a check for "IS_ENABLED(CONFIG_64BIT)", to simplify the code and to increase compile coverage. Now we can also remove the __maybe_unused used in max_mapped_addr declaration. We also remove the BUG_ON check of mapping the last 4K bytes of the addressable memory since this is always true for every kernel actually. Signed-off-by:
-
Jisheng Zhang authored
The is_kdump_kernel() returns false for !CRASH_DUMP case, so we don't need the #ifdef CONFIG_CRASH_DUMP for is_kdump_kernel() checking. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V updates from Palmer Dabbelt: - Support for the DA9063 as used on the HiFive Unmatched. - Support for relative extables, which puts us in line with other architectures and save some space in vmlinux. - A handful of kexec fixes/improvements, including the ability to run crash kernels from PCI-addressable memory on the HiFive Unmatched. - Support for the SBI SRST extension, which allows systems that do not have an explicit driver in Linux to reboot. - A handful of fixes and cleanups, including to the defconfigs and device trees. * tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits) RISC-V: Use SBI SRST extension when available riscv: mm: fix wrong phys_ram_base value for RV64 RISC-V: Use common riscv_cpuid_to_hartid_mask() for both SMP=y and SMP=n riscv: head: remove useless __PAGE_ALIGNED_BSS and .balign riscv: errata: alternative: mark vendor_patch_func __initdata riscv: head: make secondary_start_common() static riscv: remove cpu_stop() riscv: try to allocate crashkern region from 32bit addressible memory riscv: use hart id instead of cpu id on machine_kexec riscv: Don't use va_pa_offset on kdump riscv: dts: sifive: fu540-c000: Fix PLIC node riscv: dts: sifive: fu540-c000: Drop bogus soc node compatible values riscv: dts: sifive: Group tuples in register properties riscv: dts: sifive: Group tuples in interrupt properties riscv: dts: microchip: mpfs: Group tuples in interrupt properties riscv: dts: microchip: mpfs: Fix clock controller node riscv: dts: microchip: mpfs: Fix reference clock node riscv: dts: microchip: mpfs: Fix PLIC node riscv: dts: microchip: mpfs: Drop empty chosen node riscv: dts: canaan: Group tuples in interrupt properties ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull Kbuild updates from Masahiro Yamada: - Add new kconfig target 'make mod2noconfig', which will be useful to speed up the build and test iteration. - Raise the minimum supported version of LLVM to 11.0.0 - Refactor certs/Makefile - Change the format of include/config/auto.conf to stop double-quoting string type CONFIG options. - Fix ARCH=sh builds in dash - Separate compression macros for general purposes (cmd_bzip2 etc.) and the ones for decompressors (cmd_bzip2_with_size etc.) - Misc Makefile cleanups * tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) kbuild: add cmd_file_size arch: decompressor: remove useless vmlinux.bin.all-y kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22} kbuild: drop $(size_append) from cmd_zstd sh: rename suffix-y to suffix_y doc: kbuild: fix default in `imply` table microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV} certs: move scripts/extract-cert to certs/ kbuild: do not quote string values in include/config/auto.conf kbuild: do not include include/config/auto.conf from shell scripts certs: simplify $(srctree)/ handling and remove config_filename macro kbuild: stop using config_filename in scripts/Makefile.modsign certs: remove misleading comments about GCC PR certs: refactor file cleaning certs: remove unneeded -I$(srctree) option for system_certificates.o certs: unify duplicated cmd_extract_certs and improve the log certs: use $< and $@ to simplify the key generation rule kbuild: remove headers_check stub kbuild: move headers_check.pl to usr/include/ certs: use if_changed to re-generate the key when the key type is changed ...
-
Linus Torvalds authored
Merge branch 'random-5.17-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator fixes from Jason Donenfeld: - Some Kconfig changes resulted in BIG_KEYS being unselectable, which Justin sent a patch to fix. - Geert pointed out that moving to BLAKE2s bloated vmlinux on little machines, like m68k, so we now compensate for this. - Numerous style and house cleaning fixes, meant to have a cleaner base for future changes. * 'random-5.17-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: random: simplify arithmetic function flow in account() random: selectively clang-format where it makes sense random: access input_pool_data directly rather than through pointer random: cleanup fractional entropy shift constants random: prepend remaining pool constants with POOL_ random: de-duplicate INPUT_POOL constants random: remove unused OUTPUT_POOL constants random: rather than entropy_store abstraction, use global random: remove unused extract_entropy() reserved argument random: remove incomplete last_data logic random: cleanup integer types random: cleanup poolinfo abstraction random: fix typo in comments lib/crypto: sha1: re-roll loops to reduce code size lib/crypto: blake2s: move hmac construction into wireguard lib/crypto: add prompts back to crypto libraries
-
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linuxLinus Torvalds authored
Pull hwspinlock updates from Bjorn Andersson: "This contains a change to the stm32 hwspinlock driver to ensure that the hardware is operational even without CONFIG_PM" * tag 'hwlock-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: hwspinlock: stm32: enable clock at probe
-
- 18 Jan, 2022 19 commits
-
-
Jason A. Donenfeld authored
Now that have_bytes is never modified, we can simplify this function. First, we move the check for negative entropy_count to be first. That ensures that subsequent reads of this will be non-negative. Then, have_bytes and ibytes can be folded into their one use site in the min_t() function. Suggested-by:
Dominik Brodowski <linux@dominikbrodowski.net> Reviewed-by:
Jason A. Donenfeld <Jason@zx2c4.com>
-
Jason A. Donenfeld authored
This is an old driver that has seen a lot of different eras of kernel coding style. In an effort to make it easier to code for, unify the coding style around the current norm, by accepting some of -- but certainly not all of -- the suggestions from clang-format. This should remove ambiguity in coding style, especially with regards to spacing, when code is being changed or amended. Consequently it also makes code review easier on the eyes, following one uniform style rather than several. Reviewed-by:
-
Jason A. Donenfeld authored
This gets rid of another abstraction we no longer need. It would be nice if we could instead make pool an array rather than a pointer, but the latent entropy plugin won't be able to do its magic in that case. So instead we put all accesses to the input pool's actual data through the input_pool_data array directly. Reviewed-by:
-
Jason A. Donenfeld authored
The entropy estimator is calculated in terms of 1/8 bits, which means there are various constants where things are shifted by 3. Move these into our pool info enum with the other relevant constants. While we're at it, move an English assertion about sizes into a proper BUILD_BUG_ON so that the compiler can ensure this invariant. Reviewed-by:
-
Jason A. Donenfeld authored
The other pool constants are prepended with POOL_, but not these last ones. Rename them. This will then let us move them into the enum in the following commit. Reviewed-by:
-
Jason A. Donenfeld authored
We already had the POOL_* constants, so deduplicate the older INPUT_POOL ones. As well, fold EXTRACT_SIZE into the poolinfo enum, since it's related. Reviewed-by:
-
Jason A. Donenfeld authored
We no longer have an output pool. Rather, we have just a wakeup bits threshold for /dev/random reads, presumably so that processes don't hang. This value, random_write_wakeup_bits, is configurable anyway. So all the no longer usefully named OUTPUT_POOL constants were doing was setting a reasonable default for random_write_wakeup_bits. This commit gets rid of the constants and just puts it all in the default value of random_write_wakeup_bits. Reviewed-by:
-
Jason A. Donenfeld authored
Originally, the RNG used several pools, so having things abstracted out over a generic entropy_store object made sense. These days, there's only one input pool, and then an uneven mix of usage via the abstraction and usage via &input_pool. Rather than this uneasy mixture, just get rid of the abstraction entirely and have things always use the global. This simplifies the code and makes reading it a bit easier. Reviewed-by:
-
Jason A. Donenfeld authored
This argument is always set to zero, as a result of us not caring about keeping a certain amount reserved in the pool these days. So just remove it and cleanup the function signatures. Reviewed-by:
-
Jason A. Donenfeld authored
There were a few things added under the "if (fips_enabled)" banner, which never really got completed, and the FIPS people anyway are choosing a different direction. Rather than keep around this halfbaked code, get rid of it so that we can focus on a single design of the RNG rather than two designs. Reviewed-by:
-
Jason A. Donenfeld authored
Rather than using the userspace type, __uXX, switch to using uXX. And rather than using variously chosen `char *` or `unsigned char *`, use `u8 *` uniformly for things that aren't strings, in the case where we are doing byte-by-byte traversal. Reviewed-by:
-
Jason A. Donenfeld authored
Now that we're only using one polynomial, we can cleanup its representation into constants, instead of passing around pointers dynamically to select different polynomials. This improves the codegen and makes the code a bit more straightforward. Reviewed-by:
-
Schspa Shi authored
s/or/for Signed-off-by:
Schspa Shi <schspa@gmail.com> Signed-off-by:
-
Jason A. Donenfeld authored
With SHA-1 no longer being used for anything performance oriented, and also soon to be phased out entirely, we can make up for the space added by unrolled BLAKE2s by simply re-rolling SHA-1. Since SHA-1 is so much more complex, re-rolling it more or less takes care of the code size added by BLAKE2s. And eventually, hopefully we'll see SHA-1 removed entirely from most small kernel builds. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ard Biesheuvel <ardb@kernel.org> Tested-by:
-
Jason A. Donenfeld authored
Basically nobody should use blake2s in an HMAC construction; it already has a keyed variant. But unfortunately for historical reasons, Noise, used by WireGuard, uses HKDF quite strictly, which means we have to use this. Because this really shouldn't be used by others, this commit moves it into wireguard's noise.c locally, so that kernels that aren't using WireGuard don't get this superfluous code baked in. On m68k systems, this shaves off ~314 bytes. Cc: Herbert Xu <herbert@gondor.apana.org.au> Tested-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
-
Justin M. Forbes authored
Commit 6048fdcc ("lib/crypto: blake2s: include as built-in") took away a number of prompt texts from other crypto libraries. This makes values flip from built-in to module when oldconfig runs, and causes problems when these crypto libs need to be built in for thingslike BIG_KEYS. Fixes: 6048fdcc ("lib/crypto: blake2s: include as built-in") Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: linux-crypto@vger.kernel.org Signed-off-by:
Justin M. Forbes <jforbes@fedoraproject.org> [Jason: - moved menu into submenu of lib/ instead of root menu - fixed chacha sub-dependencies for CONFIG_CRYPTO] Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengineLinus Torvalds authored
Pull dmaengine updates from Vinod Koul: "A bunch of new support and few updates to drivers: New support: - DMA_MEMCPY_SG support is bought back as we have a user in Xilinx driver - Support for TI J721S2 SoC in k3-udma driver - Support for Ingenic MDMA and BDMA in the JZ4760 - Support for Renesas r8a779f0 dmac Updates: - We are finally getting rid of slave_id, so this brings in the changes across tree for that - updates for idxd driver - at_xdmac driver cleanup" * tag 'dmaengine-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (60 commits) dt-bindings: dma-controller: Split interrupt fields in example dmaengine: pch_dma: Remove usage of the deprecated "pci-dma-compat.h" API dmaengine: at_xdmac: Fix race over irq_status dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_tasklet() dmaengine: at_xdmac: Fix at_xdmac_lld struct definition dmaengine: at_xdmac: Fix lld view setting dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_advance_work() dmaengine: at_xdmac: Fix concurrency over xfers_list dmaengine: at_xdmac: Move the free desc to the tail of the desc list dmaengine: at_xdmac: Fix race for the tx desc callback dmaengine: at_xdmac: Fix concurrency over chan's completed_cookie dmaengine: at_xdmac: Print debug message after realeasing the lock dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pending dmaengine: at_xdmac: Don't start transactions at tx_submit level dmaengine: idxd: deprecate token sysfs attributes for read buffers dmaengine: idxd: change bandwidth token to read buffers dmaengine: idxd: fix wq settings post wq disable dmaengine: idxd: change MSIX allocation based on per wq activation dmaengine: idxd: fix descriptor flushing locking dmaengine: idxd: embed irq_entry in idxd_wq struct ... -
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ATA updates from Damien Le Moal: "A larger than usual set of changes for this cycle. The bulk of the changes are part of a rework of libata messages and debugging features from Hannes. In more detail, the changes are as follows. - Small code cleanups in the pata_ali driver (unnecessary variable initialization and simplified return statement, from Jason and Colin. - Switch to using struct_group() in the sata_fsl driver, from Kees. - Convert many sysfs attribute show functions to use sysfs_emit() instead of snprintf(), from me. - sata_dwc_460ex driver code cleanups, from Andy. - Improve DMA setup and remove superfluous error message in libahci_platform, from Andy - A small code cleanup in libata to use min() instead of open coding test, from Changcheng. - Rework of libata messages from Hannes. This is especially focused on replacing compile time defined debugging messages (DPRINTK() and VPRINTK()) with regular dynamic debugging messages (pr_debug()) and traceipoint events. Both libata-core and many drivers are updated to have a consistent debugging level control for all drivers. - Extend compile test support to as many drivers as possible in ATA Kconfig to improve compile test coverage, from me. - Fixes to avoid compile time warnings (W=1) and sparse warnings in sata_fsl and ahci_xgene drivers, from me. - Fix the interface of the read_id() port operation method to clarify that the data buffer passed as an argument is little endian. This avoids sparse warnings in the pata_netcell, pata_it821x, ahci_xgene, ahci_cevaxi and ahci_brcm drivers. From me. - Small code cleanup in the pata_octeon_cf driver, from Minghao. - Improved IRQ configuration code in pata_of_platform, from Lad. - Simplified implementation of __ata_scsi_queuecmd(), from Wenchao. - Debounce delay flag renaming, from Paul. - Add support for AMD A85 FCH (Hudson D4) AHCI adapters, from Paul" * tag 'ata-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (106 commits) ata: pata_ali: remove redundant return statement ata: ahci: Add support for AMD A85 FCH (Hudson D4) ata: libata: Rename link flag ATA_LFLAG_NO_DB_DELAY ata: libata-scsi: simplify __ata_scsi_queuecmd() ata: pata_of_platform: Use platform_get_irq_optional() to get the interrupt ata: pata_samsung_cf: add compile test support ata: pata_pxa: add compile test support ata: pata_imx: add compile test support ata: pata_ftide010: add compile test support ata: pata_cs5535: add compile test support ata: pata_octeon_cf: remove redundant val variable ata: fix read_id() ata port operation interface ata: ahci_xgene: use correct type for port mmio address ata: sata_fsl: fix cmdhdr_tbl_entry and prde struct definitions ata: sata_fsl: fix scsi host initialization ata: pata_bk3710: add compile test support ata: ahci_seattle: add compile test support ata: ahci_xgene: add compile test support ata: ahci_tegra: add compile test support ata: ahci_sunxi: add compile test support ... -
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio updates from Michael Tsirkin: "virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes. - partial support for < MAX_ORDER - 1 granularity for virtio-mem - driver_override for vdpa - sysfs ABI documentation for vdpa - multiqueue config support for mlx5 vdpa - and misc fixes, cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits) vdpa/mlx5: Fix tracking of current number of VQs vdpa/mlx5: Fix is_index_valid() to refer to features vdpa: Protect vdpa reset with cf_mutex vdpa: Avoid taking cf_mutex lock on get status vdpa/vdpa_sim_net: Report max device capabilities vdpa: Use BIT_ULL for bit operations vdpa/vdpa_sim: Configure max supported virtqueues vdpa/mlx5: Report max device capabilities vdpa: Support reporting max device capabilities vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps() vdpa: Add support for returning device configuration information vdpa/mlx5: Support configuring max data virtqueue vdpa/mlx5: Fix config_attr_mask assignment vdpa: Allow to configure max data virtqueues vdpa: Read device configuration only if FEATURES_OK vdpa: Sync calls set/get config/status with cf_mutex vdpa/mlx5: Distribute RX virtqueues in RQT object vdpa: Provide interface to read driver features vdpa: clean up get_config_size ret value handling virtio_ring: mark ring unused on error ...
-
