Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add counters for how much disk space we're using per btree.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Helper to show raw accounting in sysfs, mainly for debugging.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Helper to show raw accounting in sysfs, mainly for debugging.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We no longer have to walk the whole btree to calculate compression
stats.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This adds per-compression-type accounting of compressed and uncompressed
size as well as number of extents - meaning we can now see compression
ratio (without walking the whole filesystem).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Verify that the in-memory accounting verifies the on-disk accounting
after a clean shutdown.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bch2_replicas_gc2() is used for garbage collection superblock replicas
entries that are empty - this converts it to the new accounting scheme.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Rewrite fsck/gc for the new accounting scheme.

This adds a second set of in-memory accounting counters for gc to use;
like with other parts of gc we run all trigger in TRIGGER_GC mode, then
compare what we calculated to existing in-memory accounting at the end.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

More dead code deletion
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

More dead code deletion.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Dead code.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

More deletion of dead code.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

More ripping out of the old disk space accounting.

Note that the new disk space accounting is incompatible with the old,
and writing out old style disk space accounting with the new code is
infeasible.

This means upgrading and downgrading past this version requires
regenerating accounting.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

With bch2_ioctl_fs_usage(), this is now dead code.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This converts bch2_ioctl_fs_usage() to read from the new disk
accounting, via bch2_fs_replicas_usage_read().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Deleting code for the old disk accounting scheme.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Reading disk accounting now requires an eytzinger lookup (see:
bch2_accounting_mem_read()), but the per-device counters are used
frequently enough that we'd like to still be able to read them with just
a percpu sum, as in the old code.

This patch special cases the device counters; when we update in-memory
accounting we also update the old style percpu counters if it's a deice
counter update.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This fixes a performance regression in journal replay; without
colaescing accounting keys we have multiple keys at the same position,
which means journal_keys_peek_upto() has to skip past many overwritten
keys - turning journal replay into an O(n^2) algorithm.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Main part of the disk accounting rewrite.

This is a wholesale rewrite of the existing disk space accounting, which
relies on percepu counters that are sharded by journal buffer, and
rolled up and added to each journal write.

With the new scheme, every set of counters is a distinct key in the
accounting btree; this fixes scaling limitations of the old scheme,
where counters took up space in each journal entry and required multiple
percpu counters.

Now, in memory accounting requires a single set of percpu counters - not
multiple for each in flight journal buffer - and in the future we'll
probably also have counters that don't use in memory percpu counters,
they're not strictly required.

An accounting update is now a normal btree update, using the btree write
buffer path. At transaction commit time, we apply accounting updates to
the in memory counters, which are percpu counters indexed in an
eytzinger tree by the accounting key.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Teach the btree write buffer how to accumulate accounting keys - instead
of having the newer key overwrite the older key as we do with other
updates, we need to add them together.

Also, add a flag so that write buffer flush knows when journal replay is
finished flushing accounting, and teach it to hold accounting keys until
that flag is set.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Until accounting keys hit the btree, they are deltas, not new versions
of the existing key; this means we have to teach journal replay to
accumulate them.

Additionally, the journal doesn't track precisely which entries have
been flushed to the btree; it only tracks a range of entries that may
possibly still need to be flushed.

That means we need to compare accounting keys against the version in the
btree and only flush updates that are newer.

There's another wrinkle with the write buffer: if the write buffer
starts flushing accounting keys before journal replay has finished
flushing accounting keys, journal replay will see the version number
from the new updates and updates from the journal will be lost.

To avoid this, journal replay has to flush accounting keys first, and
we'll be adding a flag so that write buffer flush knows to hold
accounting keys until then.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

New key type for the disk space accounting rewrite.

 - Holds a variable sized array of u64s (may be more than one for
   accounting e.g. compressed and uncompressed size, or buckets and
   sectors for a given data type)

 - Updates are deltas, not new versions of the key: this means updates
   to accounting can happen via the btree write buffer, which we'll be
   teaching to accumulate deltas.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This updates bcachefs to use the new mount API:

- Update the file_system_type to use the new init_fs_context()
  function.

- Define the new fs_context_operations functions.

- No longer register bch2_mount() and bch2_remount(); these are now
  called via the new fs_context functions.

- Define a new helper type, bch2_opts_parse that includes a struct
  bch_opts and additionally a printbuf used to save options that can't
  be parsed until after the FS is opened. This enables us to parse as
  many options as possible prior to opening the filesystem while saving
  those options that need the open FS for later parsing.
Signed-off-by: Thomas Bertschinger <tahbertschinger@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This introduces a new error code, option_needs_open_fs, which is used to
indicate that an attempt was made to parse a mount option prior to
opening a filesystem, when that mount option requires an open filesystem
in order to be validated.

Returning this error results in bch2_parse_one_mount_opt() saving that
option for later parsing, after the filesystem is opened.
Signed-off-by: Thomas Bertschinger <tahbertschinger@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Mount options that take the name of a device that may be part of a
filesystem, for example "metadata_target", cannot be validated until
after the filesystem has been opened. However, an attempt to parse those
options may be made prior to the filesystem being opened.

This change adds a printbuf parameter to bch2_parse_mount_opts() which
will be used to save those mount options, when they are supplied prior
to the FS being opened, so that they can be parsed later.

This functionality is not currently needed, but will be used after
bcachefs starts using the new mount API to parse mount options. This is
because using the new mount API, we will process mount options prior to
opening the FS, but the new API doesn't provide a convenient way to
"replay" mount option parsing. So we save these options ourselves to
accomplish this.

This change also splits out the code to parse a single option into
bch2_parse_one_mount_opt(), which will be useful when using the new
mount API which deals with a single mount option at a time.
Signed-off-by: Thomas Bertschinger <tahbertschinger@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

New on disk format version for bch_alloc->stripe_sectors and
BCH_DATA_unstriped - accounting for unstriped data in stripe buckets.

Upgrade/downgrade requires regenerating alloc info - but only if erasure
coding is in use.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add a new pseudo data type, to track buckets that are members of a
stripe, but have unstriped data in them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add a separate counter to bch_alloc_v4 for amount of striped data; this
lets us separately track striped and unstriped data in a bucket, which
lets us see when erasure coding has failed to update extents with stripe
pointers, and also find buckets to continue updating if we crash mid way
through creating a new stripe.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Consolidate duplicated checks for extents/dirents/xattrs - these keys
should all have a corresponding inode of the correct type.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The output of mount options such as "metadata_target" in `/proc/mounts`
uses the full path to the device.

mount(8) from util-linux uses the output from `/proc/mounts` to pass
existing mount options when performing a remount, so bcachefs should
accept as input the same form that it prints as output.

Without this change:

$ mount -t bcachefs -o metadata_target=vdb /dev/vdb /mnt
$ strace mount -o remount /mnt
...
fsconfig(4, FSCONFIG_SET_STRING, "metadata_target", "/dev/vdb", 0) = -1 EINVAL (Invalid argument)
...
Signed-off-by: Thomas Bertschinger <tahbertschinger@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add a new helper to fix inode_to_text()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

When "read_only" is exposed as a mount option, it is redundant with the
standard option "ro" and gives users multiple ways to specify that a
bcachefs filesystem should be mounted read-only. This presents the risk
of having inconsistent options specified.

This can be seen when remounting a read-only filesystem in read-write
mode, using mount(8) from util-linux. Because mount(8) parses the
existing mount options from `/proc/mounts` and applies them when
remounting, it can end up applying both "read_only" and "rw":

$ mount img -o ro /mnt
$ strace mount -o remount,rw /mnt
...
fsconfig(4, FSCONFIG_SET_FLAG, "read_only", NULL, 0) = 0
fsconfig(4, FSCONFIG_SET_FLAG, "rw", NULL, 0) = 0
...

Making "read_only" no longer a mount option means this edge case cannot
occur.

Fixes: 62719cf3 ("bcachefs: Fix nochanges/read_only interaction")
Signed-off-by: Thomas Bertschinger <tahbertschinger@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

A subsequent change will remove "read_only" as a mount option in favor
of the standard option "ro", meaning the userspace fsck command cannot
pass it to the fsck ioctl. Instead, in offline fsck, set "read_only"
kernel-side without trying to parse it as a mount option.

For compatibility with versions of the "bcachefs fsck" command that try
to pass the "read_only" mount opt, remove it from the mount options
string prior to parsing when it is present.
Signed-off-by: Thomas Bertschinger <tahbertschinger@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

this is for the userspace metadata dump tool
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Use try_cmpxchg() family of functions instead of
cmpxchg (*ptr, old, new) == old. x86 CMPXCHG instruction returns
success in ZF flag, so this change saves a compare after cmpxchg
(and related move instruction in front of cmpxchg).

Also, try_cmpxchg() implicitly assigns old *ptr value to "old" when
cmpxchg fails. There is no need to re-read the value in the loop.

No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

fs-common.h needs dirent.h for enum bch_rename_mode
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>