So that we do not need to access tp->tty there. It is going away.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: linux-s390@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Blah, do not assume that raw3270_view is at the beginning of tty3270.
Use proper types and container_of wherever needed.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: linux-s390@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Let us initialize all the tty3270's members at the place where the
structure is allocated.

It cleans up tty->ops->open a bit.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: linux-s390@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

80 bytes which are allocated in tty->ops->open and assigned to
tty->driver_data are never used. Remove that.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: linux-s390@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty_port will hold tty buffers in the future. So we need to have it
even here. The only needed member here is tty, so let us store it in
the structure now.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: linux-s390@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty_port will hold tty buffers in the future. So we need to have it
even here. The only needed member here is tty, so let us store it in
the structure now.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: linux-s390@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are two copies of allocations of device information. One of them
is totally broken. See:
raw->cdev = cdev;
raw->inbuf = (char *) raw + sizeof(struct raw3215_info);
memset(raw, 0, sizeof(struct raw3215_info));

It suggests that this path was never executed. The code uses both
raw->cdev and raw->inbuf all over. And it is NULL due to the memset
here, so it would panic immediately. I believe nobody used that driver
without being a system console.

Either way, let us fix it by moving the allocations (and
initializations) to a single place. This will save us some double
initializations later too.

And while at it, initialize the timer properly -- once, at the
allocation.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: linux-s390@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We switched tty refcounting there to the one provided by tty_port
helpers. So tty_port->tty is now protected by tty_port->lock, not by
hso_serial->serial_lock.

Side note: tty->driver_data does not need the lock, so it is needed
neither in open, nor in close paths.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jan Dumon <j.dumon@option.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty is never NULL in tty->ops->* while the device is open. (And they
are not called otherwise.) So remove pointless checks and use
tty->driver_data directly.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jan Dumon <j.dumon@option.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

And use open count from there. Other members will follow.

Remark: port.count is (and never was) properly protected. Only a mutex
is held, so ISR and all the functions it calls may see an invalid
state.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jan Dumon <j.dumon@option.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Do not leak tty_driver structure on each module removal. Also do
proper frees in fail paths of module_init.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jan Dumon <j.dumon@option.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It is set in alloc_tty_driver already. No need to re-set.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jan Dumon <j.dumon@option.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This removes a bunch of duplicated code which does the same as
tty_port_block_til_ready does.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add there .carrier_raised. It is taken from current block_til_ready.
We will need tty_port->ops->carrier_raised for
tty_port_block_til_ready helper.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The code does almost the same, so there we can leverage the helper's
code. The only difference is locking. The helper protects counts by a
spinlock. This never hurts and should be added to other code parts
too.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In some functions we use tty_port much. So let us have a local pointer
to that variable instead of having info->port all over the code.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

No recounting this time, just a plain switch.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blocked_open and count this time.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Hmm, the isdn ones were initialized twice.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

And use tty_port->flags now. Other members will follow.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

session and pgrp are unused. Prune them.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Huh, this was a mess.

* Remove the 5 indent levels by just returning from isdn_tty_try_read
  when the conditions there are not satisfied.
* Use 'continue' in loop in isdn_tty_readmodem to save 2 levels.
* Chain 'if's in isdn_tty_modem_escape.
* Use 'continue' in loop in isdn_tty_carrier_timeout to save 1 level.

Better to look at this patch with -w -b.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The module which called allocate_tty_driver is already refcounted by
the TTY layer automatically. And since THIS_MODULE is isdn_tty and it
allocated the tty_driver, there is no need to do the counts in isdn's
tty->ops->open/close.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

They are the same as TTY ones. So there is no need to redefine them.
Remove ISDN_ASYNC_* and use only ASYNC_*. Except the MAGIC number, of
course.

While we are there, remove also the SERIAL_TYPE flags which are
unused.

Perhaps we should move the ASYNC flags from serial.h to tty.h given
they are used by the tty layer and tty drivers, not only serial?
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I wonder how this survived there during the whole 2.6 series until now
:D.

Callouts are not used for a decade, so let us remove it also from
isdn. This means removal of ISDN_ASYNC_CALLOUT_ACTIVE which is never
raised in info->flags and callout_termios which are never used.

This will help us to get rid of ISDN_ASYNC_* flags and use ASYNC ones
from serial.h. And then we will switch to tty_port.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CVS $Id$ is unused and makes no sense in our tree. Get rid of that.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since nobody in the kernel includes that file, let us remove the
structs visible to the kernel.

However since the userspace sees the file, it still may include that.
hence deprecate the use of the header by an added cpp #warning.

We should remove the file completely after a couple of years.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The tty_port used in the driver is left uninitialized. Add the
initialization there.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Mikael Starvik <starvik@axis.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: linux-cris-kernel@axis.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This used to be a helper buffer for generic_serial. generic_serial is
gone, tmp_buf shall be removed.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Mikael Starvik <starvik@axis.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: linux-cris-kernel@axis.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull two more small regmap fixes from Mark Brown:
 - Now we have users for it that aren't running Android it turns out
   that regcache_sync_region() is much more useful to drivers if it's
   exported for use by modules.  Who knew?
 - Make sure we don't divide by zero when doing debugfs dumps of
   rbtrees, not visible up until now because everything was providing at
   least some cache on startup.

* tag 'regmap-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: prevent division by zero in rbtree_show
  regmap: Export regcache_sync_region()

Pull a few KVM fixes from Avi Kivity:
 "A bunch of powerpc KVM fixes, a guest and a host RCU fix (unrelated),
  and a small build fix."

* 'kvm-updates/3.4' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Resolve RCU vs. async page fault problem
  KVM: VMX: vmx_set_cr0 expects kvm->srcu locked
  KVM: PMU: Fix integer constant is too large warning in kvm_pmu_set_msr()
  KVM: PPC: Book3S: PR: Fix preemption
  KVM: PPC: Save/Restore CR over vcpu_run
  KVM: PPC: Book3S HV: Save and restore CR in __kvmppc_vcore_entry
  KVM: PPC: Book3S HV: Fix kvm_alloc_linear in case where no linears exist
  KVM: PPC: Book3S: Compile fix for ppc32 in HIOR access code

Pull SuperH fixes from Paul Mundt.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
  sh: fix clock-sh7757 for the latest sh_mobile_sdhi driver
  serial: sh-sci: use serial_port_in/out vs sci_in/out.
  sh: vsyscall: Fix up .eh_frame generation.
  sh: dma: Fix up device attribute mismatch from sysdev fallout.
  sh: dwarf unwinder depends on SHcompact.
  sh: fix up fallout from system.h disintegration.

Pull security layer fixlet from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  sysctl: fix write access to dmesg_restrict/kptr_restrict

Pull ACPI & Power Management patches from Len Brown:
 "Two fixes for cpuidle merge-window changes, plus a URL fix in
  MAINTAINERS"

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  MAINTAINERS: Update git url for ACPI
  cpuidle: Fix panic in CPU off-lining with no idle driver
  ACPI processor: Use safe_halt() rather than halt() in acpi_idle_play_dead()

Pull target fixes from Nicholas Bellinger:
 "Pull two tcm_fc fabric related fixes for -rc2:

  Note that both have been CC'ed to stable, and patch #1 is the
  important one that addresses a memory corruption bug related to FC
  exchange timeouts + command abort.

  Thanks again to MDR for tracking down this issue!"

* '3.4-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  tcm_fc: Do not free tpg structure during wq allocation failure
  tcm_fc: Add abort flag for gracefully handling exchange timeout

Avoid freeing a registered tpg structure if an alloc_workqueue call
fails.  This fixes a bug where the failure was leaking memory associated
with se_portal_group setup during the original core_tpg_register() call.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Acked-by: Kiran Patil <Kiran.patil@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Add abort flag and use it to terminate processing when an exchange
is timed out or is reset. The abort flag is used in place of the
transport_generic_free_cmd function call in the reset and timeout
cases, because calling that function in that context would free
memory that was in use. The aborted flag allows the lifetime to
be managed in a more normal way, while truncating the processing.

This change eliminates a source of memory corruption which
manifested in a variety of ugly ways.

(nab: Drop unused struct fc_exch *ep in ft_recv_seq)
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Acked-by: Kiran Patil <Kiran.patil@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>