VM sizes smaller than 1GB doesn't make much sense anyway.

v2: fix typo and grammer
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

But in any case nothing really shocking in
here, 2 reverts, 1 quirk and a regression fix a WARN.

* tag 'drm-intel-fixes-2014-07-18' of git://anongit.freedesktop.org/drm-intel:
  Revert "drm/i915: reverse dp link param selection, prefer fast over wide again"
  drm/i915: Track the primary plane correctly when reassigning planes
  drm/i915: Ignore VBT backlight presence check on HP Chromebook 14
  Revert "drm/i915: Don't set the 8to6 dither flag when not scaling"

Pull infiniband/rdma fixes from Roland Dreier:
 - cxgb4 hardware driver regression fixes
 - mlx5 hardware driver regression fixes

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mlx5: Enable "block multicast loopback" for kernel consumers
  RDMA/cxgb4: Call iwpm_init() only once
  mlx5_core: Fix possible race between mr tree insert/delete
  RDMA/cxgb4: Initialize the device status page
  RDMA/cxgb4: Clean up connection on ARP error
  RDMA/cxgb4: Fix skb_leak in reject_cr()

Pull hwmon fixes from Guenter Roeck:
 "More fallout from module tests and code inspection.

  Fixes to temperature limit write operations in adt7470 driver.  Also,
  dashes are not allowed in hwmon 'name' attributes.  Fix drivers where
  necessary"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (adt7470) Fix writes to temperature limit registers
  hwmon: (da9055) Don't use dash in the name attribute
  hwmon: (da9052) Don't use dash in the name attribute

Pull iommu fixes from Joerg Roedel:
 "A couple of fixes for the Freescale PAMU driver queued up:

   - fix PAMU window size check.
   - fix the device domain attach condition.
   - fix the error condition during iommu group"

* tag 'iommu-fixes-v3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/fsl: Fix the error condition during iommu group
  iommu/fsl: Fix the device domain attach condition.
  iommu/fsl: Fix PAMU window size check.

Pull ACPI and power management fixes from Rafael Wysocki:
 "These are a few recent regression fixes, a revert of the ACPI video
  commit I promised, a system resume fix related to request_firmware(),
  an ACPI video quirk for one more Win8-oriented BIOS, an ACPI device
  enumeration documentation update and a few fixes for ARM cpufreq
  drivers.

  Specifics:

   - Fix for a recently introduced NULL pointer dereference in the core
     system suspend code occuring when platforms without ACPI attempt to
     use the "freeze" sleep state from Zhang Rui.

   - Fix for a recently introduced build warning in cpufreq headers from
     Brian W Hart.

   - Fix for a 3.13 cpufreq regression related to sysem resume that
     triggers on some systems with multiple CPU clusters from Viresh
     Kumar.

   - Fix for a 3.4 regression in request_firmware() resulting in
     WARN_ON()s on some systems during system resume from Takashi Iwai.

   - Revert of the ACPI video commit that changed the default value of
     the video.brightness_switch_enabled command line argument to 0 as
     it has been reported to break existing setups.

   - ACPI device enumeration documentation update to take recent code
     changes into account and make the documentation match the code
     again from Darren Hart.

   - Fixes for the sa1110, imx6q, kirkwood, and cpu0 cpufreq drivers
     from Linus Walleij, Nicolas Del Piano, Quentin Armitage, Viresh
     Kumar.

   - New ACPI video blacklist entry for HP ProBook 4540s from Hans de
     Goede"

* tag 'pm+acpi-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: make table sentinel macros unsigned to match use
  cpufreq: move policy kobj to policy->cpu at resume
  cpufreq: cpu0: OPPs can be populated at runtime
  cpufreq: kirkwood: Reinstate cpufreq driver for ARCH_KIRKWOOD
  cpufreq: imx6q: Select PM_OPP
  cpufreq: sa1110: set memory type for h3600
  ACPI / video: Add use_native_backlight quirk for HP ProBook 4540s
  PM / sleep: fix freeze_ops NULL pointer dereferences
  PM / sleep: Fix request_firmware() error at resume
  Revert "ACPI / video: change acpi-video brightness_switch_enabled default to 0"
  ACPI / documentation: Remove reference to acpi_platform_device_ids from enumeration.txt

Pull drm fixes from Dave Airlie:
 "One nouveau deadlock fix, one qxl irq handling fix, and a set of
  radeon pageflipping changes that fix regressions in pageflipping since
  -rc1 along with a leak and backlight fix.

  The pageflipping fixes are a bit bigger than I'd like, but there has
  been a few people focused on testing them"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: Make classic pageflip completion path less racy.
  drm/radeon: Add missing vblank_put in pageflip ioctl error path.
  drm/radeon: Remove redundant fence unref in pageflip path.
  drm/radeon: Complete page flip even if waiting on the BO fence fails
  drm/radeon: Move pinning the BO back to radeon_crtc_page_flip()
  drm/radeon: Prevent too early kms-pageflips triggered by vblank.
  drm/radeon: set default bl level to something reasonable
  drm/radeon: avoid leaking edid data
  drm/qxl: return IRQ_NONE if it was not our irq
  drm/nouveau/therm: fix a potential deadlock in the therm monitoring code

Pull /dev/random fix from Ted Ts'o:
 "Fix a BUG splat found by trinity"

* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: check for increase of entropy_count because of signed conversion

Pull crypto fixes from Herbert Xu:
 "This push fixes a boot hang in virt guests when the virtio RNG is
  enabled"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  hwrng: virtio - ensure reads happen after successful probe
  hwrng: fetch randomness only after device init

The expression entropy_count -= ibytes << (ENTROPY_SHIFT + 3) could
actually increase entropy_count if during assignment of the unsigned
expression on the RHS (mind the -=) we reduce the value modulo
2^width(int) and assign it to entropy_count. Trinity found this.

[ Commit modified by tytso to add an additional safety check for a
  negative entropy_count -- which should never happen, and to also add
  an additional paranoia check to prevent overly large count values to
  be passed into urandom_read().  ]
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

Pull gfs2 fixes from Steven Whitehouse:
 "This patch set contains two minor docs/spelling fixes, some fixes for
  flock, a change to use GFP_NOFS to avoid recursion on a rarely used
  code path and a fix for a race relating to the glock lru"

* tag 'gfs2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
  GFS2: fs/gfs2/rgrp.c: kernel-doc warning fixes
  GFS2: memcontrol: Spelling s/invlidate/invalidate/
  GFS2: Allow caching of glocks for flock
  GFS2: Allow flocks to use normal glock dq rather than dq_wait
  GFS2: replace count*size kzalloc by kcalloc
  GFS2: Use GFP_NOFS when allocating glocks
  GFS2: Fix race in glock lru glock disposal
  GFS2: Only wait for demote when last holder is dequeued

Pull device mapper fixes from Mike Snitzer:
 "Fix the dm-thinp and dm-cache targets to disallow changing the data
  device's block size"

* tag 'dm-3.16-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache metadata: do not allow the data block size to change
  dm thin metadata: do not allow the data block size to change

Pull UBI fixes from Artem Bityutskiy:
 "Two UBI fastmap-related fixes for v3.16:

   - fix UBI fastmap support which we broke in 3.16-rc1 by reversing the
     volumes RB-tree sorting criteria.
   - make sure that we scrub all PEBs where we see bit-flips - we were
     missing some of them when the fastmap feature was enabled"

* tag 'upstream-3.16-rc6' of git://git.infradead.org/linux-ubifs:
  UBI: fastmap: do not miss bit-flips
  UBI: fix the volumes tree sorting criteria

Pull xfs fixes from Dave Chinner:
 "Fixes for low memory perforamnce regressions and a quota inode
  handling regression.

  These are regression fixes for issues recently introduced - the change
  in the stack switch location is fairly important, so I've held off
  sending this update until I was sure that it still addresses the stack
  usage problem the original solved.  So while the commits in the xfs
  tree are recent, it has been under tested for several weeks now"

* tag 'xfs-for-linus-3.16-rc5' of git://oss.sgi.com/xfs/xfs:
  xfs: null unused quota inodes when quota is on
  xfs: refine the allocation stack switch
  Revert "xfs: block allocation work needs to be kswapd aware"

Cc: cluster-devel@redhat.com
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: cluster-devel@redhat.com
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

This patch removes the GLF_NOCACHE flag from the glocks associated with
flocks. There should be no good reason not to cache glocks for flocks:
they only force the glock to be demoted before they can be reacquired,
which can slow down performance and even cause glock hangs, especially
in cases where the flocks are held in Shared (SH) mode.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

This patch allows flock glocks to use a non-blocking dequeue rather
than dq_wait. It also reverts the previous patch I had posted regarding
dq_wait. The reverted patch isn't necessarily a bad idea, but I decided
this might avoid unforeseen side effects, and was therefore safer.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

kcalloc manages count*sizeof overflow.

Cc: cluster-devel@redhat.com
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

Normally GFP_KERNEL is ok here, but there is now a rarely used code path
relating to deallocation of unlinked inodes (in certain corner cases)
which if hit at times of memory shortage can cause recursion while
trying to free memory.

One solution would be to try and move the gfs2_glock_get() call so
that it is no longer called while another glock is held, but that
doesn't look at all easy, so GFP_NOFS is the best solution for the
time being.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

We must not leave items on the LRU list with GLF_LOCK set, since
they can be removed if the glock is brought back into use, which
may then potentially result in a hang, waiting for GLF_LOCK to
clear.

It doesn't happen very often, since it requires a glock that has
not been used for a long time to be brought back into use at the
same moment that the shrinker is part way through disposing of
glocks.

The fix is to set GLF_LOCK at a later time, when we already know
that the other locks can be obtained. Also, we now only release
the lru_lock in case a resched is needed, rather than on every
iteration.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

Function gfs2_glock_dq_wait is supposed to dequeue a glock and then
wait for the lock to be demoted. The problem is, if this is a shared
lock, its demote will depend on the other holders, which means you
might end up waiting forever because the other process is blocked.
This problem is especially apparent when dealing with nested flocks.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

* pm-sleep:
  PM / sleep: fix freeze_ops NULL pointer dereferences
  PM / sleep: Fix request_firmware() error at resume

* pm-cpufreq:
  cpufreq: make table sentinel macros unsigned to match use
  cpufreq: move policy kobj to policy->cpu at resume
  cpufreq: cpu0: OPPs can be populated at runtime
  cpufreq: kirkwood: Reinstate cpufreq driver for ARCH_KIRKWOOD
  cpufreq: imx6q: Select PM_OPP
  cpufreq: sa1110: set memory type for h3600

Commit 5eeaf1f1 (cpufreq: Fix build error on some platforms that
use cpufreq_for_each_*) moved function cpufreq_next_valid() to a public
header.  Warnings are now generated when objects including that header
are built with -Wsign-compare (as an out-of-tree module might be):

.../include/linux/cpufreq.h: In function ‘cpufreq_next_valid’:
.../include/linux/cpufreq.h:519:27: warning: comparison between signed
and unsigned integer expressions [-Wsign-compare]
  while ((*pos)->frequency != CPUFREQ_TABLE_END)
                           ^
.../include/linux/cpufreq.h:520:25: warning: comparison between signed
and unsigned integer expressions [-Wsign-compare]
   if ((*pos)->frequency != CPUFREQ_ENTRY_INVALID)
                         ^

Constants CPUFREQ_ENTRY_INVALID and CPUFREQ_TABLE_END are signed, but
are used with unsigned member 'frequency' of cpufreq_frequency_table.
Update the macro definitions to be explicitly unsigned to match their
use.

This also corrects potentially wrong behavior of clk_rate_table_iter()
if unsigned long is wider than usigned int.

Fixes: 5eeaf1f1 (cpufreq: Fix build error on some platforms that use cpufreq_for_each_*)
Signed-off-by: Brian W Hart <hartb@linux.vnet.ibm.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

A few more fixes for 3.16.  The pageflipping fixes I dropped last week
have finally shaped up so this is mostly fixes for fallout from the
pageflipping code changes.  Also fix a memory leak and a black screen
when restoring the backlight on console unblanking.

* 'drm-fixes-3.16' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: Make classic pageflip completion path less racy.
  drm/radeon: Add missing vblank_put in pageflip ioctl error path.
  drm/radeon: Remove redundant fence unref in pageflip path.
  drm/radeon: Complete page flip even if waiting on the BO fence fails
  drm/radeon: Move pinning the BO back to radeon_crtc_page_flip()
  drm/radeon: Prevent too early kms-pageflips triggered by vblank.
  drm/radeon: set default bl level to something reasonable
  drm/radeon: avoid leaking edid data

* acpi-scan:
  ACPI / documentation: Remove reference to acpi_platform_device_ids from enumeration.txt

* acpi-video:
  ACPI / video: Add use_native_backlight quirk for HP ProBook 4540s
  Revert "ACPI / video: change acpi-video brightness_switch_enabled default to 0"

Pull Xen fixes from Konrad Rzeszutek Wilk:
 "Two fixes found during migration of PV guests.  David would be the one
  doing this pull but he is on vacation.

  Fixes:
   - fix console deadlock when resuming PV guests
   - fix regression hit when ballooning and resuming PV guests"

* tag 'stable/for-linus-3.16-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/balloon: set ballooned out pages as invalid in p2m
  xen/manage: fix potential deadlock when resuming the console

Merge tag 'trace-fixes-v3.16-rc5-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "A few more fixes for ftrace infrastructure.

  I was cleaning out my INBOX and found two fixes from zhangwei from a
  year ago that were lost in my mail.  These fix an inconsistency
  between trace_puts() and the way trace_printk() works.  The reason
  this is important to fix is because when trace_printk() doesn't have
  any arguments, it turns into a trace_puts().  Not being able to enable
  a stack trace against trace_printk() because it does not have any
  arguments is quite confusing.  Also, the fix is rather trivial and low
  risk.

  While porting some changes to PowerPC I discovered that it still has
  the function graph tracer filter bug that if you also enable stack
  tracing the function graph tracer filter is ignored.  I fixed that up.

  Finally, Martin Lau, fixed a bug that would cause readers of the
  ftrace ring buffer to block forever even though it was suppose to be
  NONBLOCK"

This also includes the fix from an earlier pull request:

 "Oleg Nesterov fixed a memory leak that happens if a user creates a
  tracing instance, sets up a filter in an event, and then removes that
  instance.  The filter allocates memory that is never freed when the
  instance is destroyed"

* tag 'trace-fixes-v3.16-rc5-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ring-buffer: Fix polling on trace_pipe
  tracing: Add TRACE_ITER_PRINTK flag check in __trace_puts/__trace_bputs
  tracing: Fix graph tracer with stack tracer on other archs
  tracing: Add ftrace_trace_stack into __trace_puts/__trace_bputs
  tracing: instance_rmdir() leaks ftrace_event_file->filter

Need to protect mmio flip programming by event lock as well.

Need to also first enable pflip irq, then mmio program,
otherwise a flip completion may get unnoticed in the vblank
of actual completion if the flip is programmed, but
radeon_flip_work_func gets preempted immediately after
mmio programming and before vblank. In that case the
vblank irq handler wouldn't run radeon_crtc_handle_vblank()
with the completion check routine, miss the completed flip,
and only notice one vblank after actual completion, causing
a false/delayed report of flip completion.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Not needed anymore, as it is already unreffed within
radeon_flip_work_func() after its only use.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Otherwise the DRM core and userspace will be confused about which BO the
CRTC is scanning out.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As well as enabling the vblank interrupt. These shouldn't take any
significant amount of time, but at least pinning the BO has actually been
seen to fail in practice before, in which case we need to let userspace
know about it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Since 3.16-rc1 we have this new failure:

When the userspace XOrg ddx schedules vblank events to
trigger deferred kms-pageflips, e.g., via the OML_sync_control
extension call glXSwapBuffersMscOML(), or if a glXSwapBuffers()
is called immediately after completion of a previous swapbuffers
call, e.g., in a tight rendering loop with minimal rendering,
it happens frequently that the pageflip ioctl() is executed
within the same vblank in which a previous kms-pageflip completed,
or - for deferred swaps - always one vblank earlier than requested
by the client app.

This causes premature pageflips and detection of failure by
the ddx, e.g., XOrg log warnings like...

"(WW) RADEON(1): radeon_dri2_flip_event_handler: Pageflip
completion event has impossible msc 201025 < target_msc 201026"

... and error/invalid return values of glXWaitForSbcOML() and
Intel_swap_events extension.

Reason is the new way in which kms-pageflips are programmed
since 3.16.

This commit changes the time window in which the hw can
execute pending programmed pageflips. Before, a pending flip
would get executed anywhere within the vblank interval. Now
a pending flip only gets executed at the leading edge of
vblank (start of front porch), making sure that a invocation
of the pageflip ioctl() within a given vblank interval will
only lead to pageflip completion in the following vblank.

Tested to death on a DCE-4 card.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

If the value in the scratch register is 0, set it to the
max level.  This fixes an issue where the console fb blanking
code calls back into the backlight driver on unblank and then
sets the backlight level to 0 after the driver has already
set the mode and enabled the backlight.

bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=81382
https://bugs.freedesktop.org/show_bug.cgi?id=70207Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: David Heidelberger <david.heidelberger@ixit.cz>
Cc: stable@vger.kernel.org

In some cases we fetch the edid in the detect() callback
in order to determine what sort of monitor is connected.
If that happens, don't fetch the edid again in the get_modes()
callback or we will leak the edid.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This is only relevant to implementations with multiple clusters, where clusters
have separate clock lines but all CPUs within a cluster share it.

Consider a dual cluster platform with 2 cores per cluster. During suspend we
start hot unplugging CPUs in order 1 to 3. When CPU2 is removed, policy->kobj
would be moved to CPU3 and when CPU3 goes down we wouldn't free policy or its
kobj as we want to retain permissions/values/etc.

Now on resume, we will get CPU2 before CPU3 and will call __cpufreq_add_dev().
We will recover the old policy and update policy->cpu from 3 to 2 from
update_policy_cpu().

But the kobj is still tied to CPU3 and isn't moved to CPU2. We wouldn't create a
link for CPU2, but would try that for CPU3 while bringing it online. Which will
report errors as CPU3 already has kobj assigned to it.

This bug got introduced with commit 42f921a6, which overlooked this scenario.

To fix this, lets move kobj to the new policy->cpu while bringing first CPU of a
cluster back. Also do a WARN_ON() if kobject_move failed, as we would reach here
only for the first CPU of a non-boot cluster. And we can't recover from this
situation, if kobject_move() fails.

Fixes: 42f921a6 (cpufreq: remove sysfs files for CPUs which failed to come back after resume)
Cc:  3.13+ <stable@vger.kernel.org> # 3.13+
Reported-and-tested-by: Bu Yitian <ybu@qti.qualcomm.com>
Reported-by: Saravana Kannan <skannan@codeaurora.org>
Reviewed-by: Srivatsa S. Bhat <srivatsa@mit.edu>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

In commit f360d88a, we advertise blocking multicast loopback to both
kernel and userspace consumers, but don't allow kernel consumers (e.g IPoIB)
to use it with their UD QPs.  Fix that.

Fixes: f360d88a ("IB/mlx5: Add block multicast loopback support")
Reported-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

Temperature limit registers are signed. Limits therefore need
to be clamped to (-128, 127) degrees C and not to (0, 255)
degrees C.

Without this fix, writing a limit of 128 degrees C sets the
actual limit to -128 degrees C.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Reviewed-by: Axel Lin <axel.lin@ingics.com>