Before calling an operation on net_device check if that interface is
available.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Avoid use of interface name i.e 'wlan0' & 'p2p0' to check the interface
type in dev_state_ev_handler(). Now making use of netdev_ops and iface
type to know interface. Reorder the functions to avoid the forward
declaration after the above changes
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use random number to assign to cookie value.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make use of cookie information to pass to wpa_s and handle cookie value
received in the cfg80211_ops callbacks.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor linux_wlan_init_test_config() to use correct endianness for wid
values and remove unnecessary code.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove use of 'terminated_handle' variable and set the 'hif_drv' to
NULL once it's free.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor scan() cfg80211 callback function and use correct value for
valid channel number limit.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove SSID string compare instead use interface type check for p2p
client interface.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename timeout related macros to have their unit clear from their name.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary debug log messages.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove macro define which are already present in the included header.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wilc_wfi_deinit_mon_interface() calls unregister_netdev() which
requires the rtnl lock again. Now move wilc_wfi_deinit_mon_interface()
out of wilc_mac_close(). Also remove explicit call to wilc_mac_close()
because unregister_netdev() takes care of calling wilc_mac_close().
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Avoid use of static variable for monitor net_device and move it inside
wilc structure.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the call to cdev_add is missing a check for failure. Fix this by
checking for failure and exiting via a new error path that ensures the
allocated comp_channel struct is kfree'd.

Detected by CoverityScan, CID#1462359 ("Unchecked return value")

Fixes: 9bc79bbc ("Staging: most: add MOST driver's aim-cdev module")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert single case switch to if statement to cleanup and
simplify code in ODM_CmnInfoPtrArrayHook().
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch check: Comparison to NULL could be written "!master"
Signed-off-by: Jasminko Dedic <betelge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the superfluous pre-declaration of struct mt7621_spi.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: NeilBrown <neil@brown.name>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch uses macros instead of hardcoded values for the SPI_MASTER
register access in mt7621_spi_reset() and mt7621_spi_prepare().
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch sorts the SPI register definitions by increasing addresses.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewd-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch changes some comments to use the recommended multi-line
comment style.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Align  macro definitions and add some empty lines to make the code better
readable.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewd-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the SPI_BPW_MASK definition as this is already
available in include/linux/spi/spi.h.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds a return code check on device_reset() and removes the
compile warning.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes unnecessary header includes and sorts the remaining
ones alphabetically.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sankalp Negi <sankalpnegi2310@gmail.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: John Crispin <john@phrozen.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch.p1 warning:

WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
+/*

It includes the SPDX expression for GPL-2.0 according to the text license
in the top of the C file.
Signed-off-by: Carlos Henrique Lima Melara <charlesmelara@outlook.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently, the Kbuild core manipulates header search paths in a crazy
way [1].

To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
the search paths in the srctree. Some Makefiles are already written in
that way, but not all. The goal of this work is to make the notation
consistent, and finally get rid of the gross hacks.

Having whitespaces after -I does not matter since commit 48f6e3cf
("kbuild: do not drop -I without parameter").

[1]: https://patchwork.kernel.org/patch/9632347/Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed redunant blank line. Issue found by checkpatch.
Signed-off-by: Sandesh Kenjana Ashok <kas.sandesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-5.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanup for IIO in the 5.1 cycle

A number of interesting new devices supported plus a good set of staging
cleanup including one graduation and one drop.

New device support
* ad56886
  - Add support for AD5674R/AD5679R with some minor driver changes to support
    more channels.
* ad7768
  - New driver and dt bindings for this 24 bit ADC.
* max44009
  - New driver and dt bindings for this ambient light sensor.
* mpu6050
  - Support the ICM 20602 IMU. Minor tweaks due to slightly different
    register map.
* NPCM adc
  - New driver and dt bindings for this BMC ADC.
* Sensiron SGP30
  - Modifiers for ethanol and H2.
  - New driver and dt bindings.
  - Follow patch added self cleaning support.
* Sensiron SPS30
  - New channel type for mass concentration.
  - New driver and bindings.
  - Minor tidy up patch followed (drop fmt specifier as unused)
* st_pressure
  - lps22hh support. ID plus information structures and dt bindings.
* ti-ads124s08
  - Add binding doc and driver.

Staging graduations
* ad7606 driver and bindings.

Staging drops
* ad7152 CDC driver dropped.  This part is near EoL and no one is known
  to be using it.  If anyone surfaces obviously we can bring the driver
  back.  If not, good to drop it to avoid wasting anyone's time cleaning
  it up.

New features
* bme680
  - DT support and bindings doc.
* isl29018
  - Add regulator for VCC.
* mag3110
  - Add regulators for supplies.
* meson-saradc
  - Support the temperature sensors of more SoCs.
* mma8452
  - Add regulators for power suplies and binding docs to reflect them.
* st-accel
  - Support the undocumented but it seems fairly common _ONT ACPI method
    to specify orientation of the sensor.

Cleanup, minor fixes and fixes for staging driver that have been broken a
long time
* ad5933
  - Drop platform data alternative to specifying the reference voltage
    using a regulator.
  - Use the clock framework to contorl the reference clock.
  - Add a DT binding doc to cover the defacto binding.
* ad7280a
  - Split up some big functions to improve readability.
* ad7606
  - Allow for timeout if interrupt never occurs.
  - Use devm functions to simplify probe and remove.
  - Use the find_closest macro to avoid need for precise values from
    userspace.
  - Add missing vendor prefixes for various DT properties. Note the
    driver is in staging still and there are no known devicetrees.
  - Add explict OF device ID table.
  - Simplify the Kconfig choices
  - Change to a threaded IRQ.
  - SPDX and simple stype fixes.
* ad7816
  - Drop unnecessary variable init.
* ad9523
  - Check a return value that was ignored.
* ad9833
  - Drop platform data.  It was just setting most values to the hardware
    defaults.
  - Use the clock framework to provide the input clock.
* adt7316 (lots of staging cleanup)
  - Fix some wrong register / bit definitions
  - Invert the logic of the check for an ldac pin so it actually makes sense.
  - Read the right register to get internal vref settings
  - Allow adt751x chips to use the internal vref for all DAC channels rather
    than a subset.
  - Remove dac vref bypass control from parts that don't have one.
  - Make the store DAC update mode function consistent with the show one.
  - Fix some spellings and other minor tidy up.
  - Avoid passing irq numbers around by putting all the irq logic in
    one place.
  - Fix an issue with the resolution of DAC control.
  - Fix support of the high resolution DAC mode (for temp proportional output)
    where supported.
  - Fix DAC read and write calculations.
* st_lsm6dsx
  - Drop an unused variable (set but not read)
* xilinx-xadc
  - Check an unhandled return value.

* tag 'iio-for-5.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (67 commits)
  iio: chemical: sps30: remove printk format specifier
  staging: iio: frequency: ad9833: Load clock using clock framework
  staging: iio: frequency: ad9833: Get frequency value statically
  dt-bindings: iio: light: Add max44009
  iio: light: add driver for MAX44009
  dt-bindings: iio: adc: Add docs for AD7768-1
  iio: adc: Add AD7768-1 ADC basic support
  staging: iio: cdc: ad7152: remove driver completely
  iio: imu: mpu6050: Add support for the ICM 20602 IMU
  dt-bindings: iio: imu: add icm20602 bindings to mpu6050
  dt-bindings: iio: pressure: add LPS22HH bindings
  iio: st_accel: use ACPI orientation data
  iio: adc: add NPCM ADC driver
  dt-binding: iio: add NPCM ADC documentation
  iio: chemical: sps30: allow changing self cleaning period
  dt-bindings: iio: chemical: Add bindings for bme680
  iio: chemical: bme680: Add device-tree support
  iio:st_pressure:initial lps22hh sensor support
  iio: accell: mma8452: add vdd/vddio regulator operation support
  dt-bindings: iio: accel: mma8452: add power supplies property
  ...

pr_fmt is used by printk wrappers. There are not any in the driver
code so remove the format specifier.
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The clock frequency is loaded from device-tree using clock framework
instead of statically value. The change allow configuration of
the device via device-trees and better initialization sequence.
This is part of broader effort to add device-tree support to this driver
and take it out from staging.
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The values from platform data were replaced by statically values.
This was just a intermediate step of taking this driver out of staging and
load data from device tree.
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Adds device tree bindings for the max44009 light sensor.
Signed-off-by: Robert Eshleman <bobbyeshleman@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The MAX44009 is a low-power ambient light sensor from Maxim
Integrated. It differs from the MAX44000 in that it doesn't have
proximity sensing and that it requires far less current (1 micro-amp
vs 5 micro-amps). The register mapping and feature set between the
two are different enough to require a new driver for the MAX44009.

Developed and tested with a BeagleBone Black and UDOO Neo (i.MX6SX)

Supported features:

* Reading lux (processed value)

* Rising and falling illuminance threshold
  events

* Configuring integration time

https://datasheets.maximintegrated.com/en/ds/MAX44009.pdfSigned-off-by: Robert Eshleman <bobbyeshleman@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Document support for AD7768-1 Analog to Digital Converter.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The ad7768-1 is a single channel, precision 24-bit analog to digital
converter (ADC).

This basic patch configures the device in fast mode, with 32 kSPS and
leaves the default sinc5 filter.

Two data conversion modes are made available. When data is retrieved by
using the read_raw attribute, one shot single conversion mode is set.
The continuous conversion mode is enabled when the triggered buffer
mechanism is used. To assure correct data retrieval, the driver waits
for the interrupt triggered by the low to high transition of the DRDY
pin.

Datasheets:
Link: https://www.analog.com/media/en/technical-documentation/data-sheets/ad7768-1.pdfSigned-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The AD7153 part has been obsoleted for some time. The AD7152 part will be
obsolete in the coming future.
Moving it out of staging doesn't make sense anymore. Which makes the driver
enter a limbo state.

This patch removes the driver completely, so that no effort is placed on
it, allowing people to focus on other parts that will still be around.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The Invensense ICM-20602 is a 6-axis MotionTracking device that
combines a 3-axis gyroscope and an 3-axis accelerometer. It is very
similar to the ICM-20608 imu which is already supported by the mpu6050
driver. The main difference is that the ICM-20602 has the i2c bus
disable bit in a separate register.
Signed-off-by: Randolph Maaßen <gaireg@gaireg.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Adding the invensense ICM-20602 to the compatible list of the mpu6050
driver
Signed-off-by: Randolph Maaßen <gaireg@gaireg.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Fix following checkpatch warnings:
WARNING: DT compatible string "st,lps22hh" appears un-documented -- check ./Documentation/devicetree/bindings/
		.compatible = "st,lps22hh",

WARNING: DT compatible string "st,lps22hh" appears un-documented -- check ./Documentation/devicetree/bindings/
		.compatible = "st,lps22hh",

Fixes: e5aab7b0 ("iio:st_pressure:initial lps22hh sensor support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>