Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update the list with the current maintainers of TI's CPSW ethernet
peripheral.
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Acked-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 0a31bd5f ("KMEM_CACHE(): simplify slab cache creation")
introduces a new macro.
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Geetha sowjanya says:

====================
Dynamically allocate BPIDs for LBK

In current driver 64 BPIDs are reserved for LBK interfaces.
These bpids are 1-to-1 mapped to LBK interface channel numbers.
In some usecases one LBK interface required more than one bpids
and in some case they may not require at all. These usescas
can't be address with the current implementation as it always
reserves only one bpid per LBK channel.

This patch addresses this issue by creating free bpid pool from
these 64 bpids instead of 1-to-1 mapping to the lbk channel.
Now based on usecase LBK interface can request a bpid using (bp_enable()).

v1 -> v2:
   - Modified commit message.
   - Dropped patch2, as for now rvu netdev have no usecase. Will
     be upstream along with the CPT driver.
   - Addressed review comments by Simon Horman.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

PCI device IDs of RVU device IDs are configurable and
RVU PF0's (ie AF's) are currently assumed as VFs that
identify loopback functionality ie LBKVFs. But in some
cases these VFs can be setup for different functionality.
Hence remove assumptions that AF's VFs are always LBK VFs
by renaming 'is_afvf' as 'is_lbkvf' explicitly and also
identify LBK VF using PCI dev ID. Similar change is done
for other VF types.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In current driver 64 BPIDs are reserved for LBK interfaces.
These bpids are 1-to-1 mapped to LBK interface channel numbers.
In some usecases one LBK interface required more than one
bpids and in some case they may not require at all.
These usescase can't be address with the current implementation
as it always reserves only one bpid per LBK channel.
This patch addresses this issue by creating free bpid pool from these
64 bpids instead of 1-to-1 mapping to the lbk channel.
Now based on usecase LBK interface can request a bpid using (bp_enable()).

This patch also reduces the number of bpids for cgx interfaces to 8
and adds proper error code
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a test case for regression in openvswitch nat that was fixed by
commit e6345d28 ("netfilter: nf_nat: fix action not being set for
all ct states").

Link: https://lore.kernel.org/netdev/20231221224311.130319-1-brad@faucet.nz/
Link: https://mail.openvswitch.org/pipermail/ovs-dev/2024-January/410476.htmlSuggested-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Brad Cowie <brad@faucet.nz>
Tested-by: Aaron Conole <aconole@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the led_polarity_set callback for setting LED polarity.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Christian Marangi says:

====================
net: mdio-ipq4019: fix wrong default MDC rate

This was a long journey to arrive and discover this problem.

To not waste too much char, there is a race problem with PHY and driver
probe. This was observed with Aquantia PHY firmware loading.

With some hacks the race problem was workarounded but an interesting
thing was notice. It took more than a minute for the firmware to load
via MDIO.

This was strange as the same operation was done by UBoot in at max 5
second and the same data was loaded.

A similar problem was observed on a mtk board that also had an
Aquantia PHY where the load was very slow. It was notice that the cause
was the MDIO bus running at a very low speed and the firmware
was missing a property (present in mtk sdk) that set the right frequency
to the MDIO bus.

It was fun to find that THE VERY SAME PROBLEM is present on IPQ in a
different form. The MDIO apply internally a division to the feed clock
resulting in the bus running at 390KHz instead of 6.25Mhz.

Searching around the web for some documentation and some include and
analyzing the uboot codeflow resulted in the divider being set wrongly
at /256 instead of /16 as the value was actually never set.
Applying the value restore the original load time for the Aquantia PHY.

This series mainly handle this by adding support for the "clock-frequency"
property.

Changes v3:
- Add Reviewed-by tag
- Fix english grammar error in comment
- Drop DTS patch
Changes v2:
- Use DIV_ROUND_UP
- Introduce logic to chose a default value for 802.3 spec 2.5MHz
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The IPQ4019 MDIO internally divide the clock feed by AHB based on the
MDIO_MODE reg. On reset or power up, the default value for the
divider is 0xff that reflect the divider set to /256.

This makes the MDC run at a very low rate, that is, considering AHB is
always fixed to 100Mhz, a value of 390KHz.

This hasn't have been a problem as MDIO wasn't used for time sensitive
operation, it is now that on IPQ807x is usually mounted with PHY that
requires MDIO to load their firmware (example Aquantia PHY).

To handle this problem and permit to set the correct designed MDC
frequency for the SoC add support for the standard "clock-frequency"
property for the MDIO node.

The divider supports value from /1 to /256 and the common value are to
set it to /16 to reflect 6.25Mhz or to /8 on newer platform to reflect
12.5Mhz.

To scan if the requested rate is supported by the divider, loop with
each supported divider and stop when the requested rate match the final
rate with the current divider. An error is returned if the rate doesn't
match any value.

On MDIO reset, the divider is restored to the requested value to prevent
any kind of downclocking caused by the divider reverting to a default
value.

To follow 802.3 spec of 2.5MHz of default value, if divider is set at
/256 and "clock-frequency" is not set in DT, assume nobody set the
divider and try to find the closest MDC rate to 2.5MHz. (in the case of
AHB set to 100MHz, it's 1.5625MHz)

While at is also document other bits of the MDIO_MODE reg to have a
clear idea of what is actually applied there.

Documentation of some BITs is skipped as they are marked as reserved and
their usage is not clear (RES 11:9 GENPHY 16:13 RES1 19:17)
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Document support for clock-frequency and add details on why this
property is needed and what values are supported.

From internal documentation, while other values are supported, the
correct function of the MDIO bus is not assured hence add only the
suggested supported values to the property enum.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: simplify TX power handling

In order to deliver a packet to the IPA hardware, we must ensure
it is powered.  We request power by calling pm_runtime_get(), and
its return value tells us the power state.  We can't block in
ipa_start_xmit(), so if power isn't enabled we prevent further
transmit attempts by calling netif_stop_queue().  Power will
eventually become enabled, at which point we call netif_wake_queue()
to allow the transmit to be retried.  When it does, the power should
be enabled, so the packet delivery can proceed.

The logic that handles this is convoluted, and was put in place
to address a race condition pointed out by Jakub Kicinski during
review.  The fix addressed that race, as well as another one that
was found while investigating it:
  b8e36e13 ("net: ipa: fix TX queue race")
I have wanted to simplify this code ever since, and I'm pleased to
report that this series implements a much better solution that
avoids both race conditions.

The first race occurs between the ->ndo_start_xmit thread and the
runtime resume thread.  If we find power is not enabled when
requested in ipa_start_xmit(), we stop queueing.  But there's a
chance the runtime resume will enable queuing just before that,
leaving queueing stopped forever.  A flag is used to ensure that
does not occur.

A second flag is used to prevent NETDEV_TX_BUSY from being returned
repeatedly during the small window between enabling queueing and
finishing power resume.  This can happen if resume was underway when
pm_runtime_get() was called and completes immediately afterward.
This condition only exists because of the use of the first flag.

The fix is to disable transmit for *every* call to ipa_start_xmit(),
disabling it *before* calling pm_runtime_get().  This leaves three
cases:
  - If the return value indicates power is not active (or is in
    transition), queueing remains disabled--thereby avoiding
    the race between disabling it and a concurrent power thread
    enabling it.
  - If pm_runtime_get() returns an error, we drop the packet and
    re-enable queueing.
  - Finally, if the hardware is powered, we re-enable queueing
    before delivering the packet to the hardware.

So the first race is avoided.  And as a result, the second condition
will not occur.

The first patch adds pointers to the TX and RX IPA endpoints in the
netdev private data.  The second patch has netif_stop_queue() be
called for all packets; if pm_runtime_get() indicates power is
enabled (or an error), netif_wake_queue() is called to enable it
again.  The third and fourth patches get rid of the STARTED and
STOPPED IPA power flags, as well as the power spinlock, because they
are no longer needed.  The last three patches just eliminate some
trivial functions, open-coding them instead.
====================

Link: https://lore.kernel.org/r/20240130192305.250915-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

All ipa_power_modem_queue_wake() does is call netif_wake_queue()
on the modem netdev.  There is no need to wrap that call in a
trivial function (and certainly not one defined in "ipa_power.c").

So get rid of ipa_power_modem_queue_wake(), and replace its one
caller with a direct call to netif_wake_queue().  Determine the
netdev pointer to use from the private TX endpoint's netdev pointer.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20240130192305.250915-8-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

All ipa_power_modem_queue_active() does now is call netif_wake_queue().
Just call netif_wake_queue() in the two places it's needed, and get
rid of ipa_power_modem_queue_active().
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20240130192305.250915-7-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

All ipa_power_modem_queue_stop() does now is call netif_stop_queue().
Just call netif_stop_queue() in the one place it's needed, and get
rid of ipa_power_modem_queue_stop().
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20240130192305.250915-6-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently the STOPPED IPA power flag is used to indicate that the
transmit queue has been stopped.  Previously this was used to avoid
setting the STARTED flag unless the queue had already been stopped.
It meant transmit queuing would be enabled on resume if it was
stopped by the transmit path--and if so, it ensured it only got
enabled once.

We only stop the transmit queue in the transmit path.  The STARTED
flag has been removed, and it causes no real harm to enable
transmits when they're already enabled.  So we can get rid of
the STOPPED flag and call netif_wake_queue() unconditionally.

This makes the IPA power spinlock unnecessary, so it can be removed
as well.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20240130192305.250915-5-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A transmit on the modem netdev can only complete if the IPA hardware
is powered.  Currently, if a transmit request arrives when the
hardware was not powered, further transmits are be stopped to allow
power-up to complete.  Once power-up completes, transmits are once
again enabled.

Runtime resume can complete at the same time a transmit request is
being handled, and previously there was a race between stopping and
restarting transmits.  The STARTED flag was used to ensure the
stop request in the transmit path was skipped if the start request
in the runtime resume path had already occurred.

Now, the queue is *always* stopped in the transmit path, *before*
determining whether power is ACTIVE.  If power is found to already
be active (or if the socket buffer is gets dropped), transmit is
re-enabled.  Otherwise it will (always) be enabled after runtime
resume completes.

The race between transmit and runtime resume no longer exists, so
there is no longer any need to maintain the STARTED flag.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20240130192305.250915-4-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There are a number of flags used in the IPA driver to attempt to
manage race conditions that can occur between runtime resume and
netdev transmit.  If we disable TX before requesting power, we can
avoid these races entirely, simplifying things considerably.

This patch implements the main change, disabling transmit always in
the net_device->ndo_start_xmit() callback, then re-enabling it again
whenever we find power is active (or when we drop the skb).

The patches that follow will refactor the "old" code to the point
that most of it can be eliminated.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20240130192305.250915-3-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Rather than repeatedly looking up the endpoints in the name map,
save the modem TX and RX endpoint pointers in the netdev private
area.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20240130192305.250915-2-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter.

  As Paolo promised we continue to hammer out issues in our selftests.
  This is not the end but probably the peak.

  Current release - regressions:

   - smc: fix incorrect SMC-D link group matching logic

  Current release - new code bugs:

   - eth: bnxt: silence WARN() when device skips a timestamp, it happens

  Previous releases - regressions:

   - ipmr: fix null-deref when forwarding mcast packets

   - conntrack: evaluate window negotiation only for packets in the
     REPLY direction, otherwise SYN retransmissions trigger incorrect
     window scale negotiation

   - ipset: fix performance regression in swap operation

  Previous releases - always broken:

   - tcp: add sanity checks to types of pages getting into the rx
     zerocopy path, we only support basic NIC -> user, no page cache
     pages etc.

   - ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()

   - nt_tables: more input sanitization changes

   - dsa: mt7530: fix 10M/100M speed on MediaTek MT7988 switch

   - bridge: mcast: fix loss of snooping after long uptime, jiffies do
     wrap on 32bit

   - xen-netback: properly sync TX responses, protect with locking

   - phy: mediatek-ge-soc: sync calibration values with MediaTek SDK,
     increase connection stability

   - eth: pds: fixes for various teardown, and reset races

  Misc:

   - hsr: silence WARN() if we can't alloc supervision frame, it
     happens"

* tag 'net-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
  doc/netlink/specs: Add missing attr in rt_link spec
  idpf: avoid compiler padding in virtchnl2_ptype struct
  selftests: mptcp: join: stop transfer when check is done (part 2)
  selftests: mptcp: join: stop transfer when check is done (part 1)
  selftests: mptcp: allow changing subtests prefix
  selftests: mptcp: decrease BW in simult flows
  selftests: mptcp: increase timeout to 30 min
  selftests: mptcp: add missing kconfig for NF Mangle
  selftests: mptcp: add missing kconfig for NF Filter in v6
  selftests: mptcp: add missing kconfig for NF Filter
  mptcp: fix data re-injection from stale subflow
  selftests: net: enable some more knobs
  selftests: net: add missing config for NF_TARGET_TTL
  selftests: forwarding: List helper scripts in TEST_FILES Makefile variable
  selftests: net: List helper scripts in TEST_FILES Makefile variable
  selftests: net: Remove executable bits from library scripts
  selftests: bonding: Check initial state
  selftests: team: Add missing config options
  hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove
  xen-netback: properly sync TX responses
  ...

Pull parisc architecture fixes from Helge Deller:
 "The current exception handler, which helps on kernel accesses to
  userspace, may exhibit data corruption. The problem is that it is not
  guaranteed that the compiler will use the processor register we
  specified in the source code, but may choose another register which
  then will lead to silent register- and data corruption. To fix this
  issue we now use another strategy to help the exception handler to
  always find and set the error code into the correct CPU register.

  The other fixes are small: fixing CPU hotplug bringup, fix the page
  alignment of the RO_DATA section, added a check for the calculated
  cache stride and fix possible hangups when printing longer output at
  bootup when running on serial console.

  Most of the patches are tagged for stable series.

   - Fix random data corruption triggered by exception handler

   - Fix crash when setting up BTLB at CPU bringup

   - Prevent hung tasks when printing inventory on serial console

   - Make RO_DATA page aligned in vmlinux.lds.S

   - Add check for valid cache stride size"

* tag 'parisc-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: BTLB: Fix crash when setting up BTLB at CPU bringup
  parisc: Fix random data corruption from exception handler
  parisc: Drop unneeded semicolon in parse_tree_node()
  parisc: Prevent hung tasks when printing inventory on serial console
  parisc: Check for valid stride size for cache flushes
  parisc: Make RO_DATA page aligned in vmlinux.lds.S

Merge tag 'kbuild-fixes-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix UML build with clang-18 and newer

 - Avoid using the alias attribute in host programs

 - Replace tabs with spaces when followed by conditionals for future GNU
   Make versions

 - Fix rpm-pkg for the systemd-provided kernel-install tool

 - Fix the undefined behavior in Kconfig for a 'int' symbol used in a
   conditional

* tag 'kbuild-fixes-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: initialize sym->curr.tri to 'no' for all symbol types again
  kbuild: rpm-pkg: simplify installkernel %post
  kbuild: Replace tabs with spaces when followed by conditionals
  modpost: avoid using the alias attribute
  kbuild: fix W= flags in the help message
  modpost: Add '.ltext' and '.ltext.*' to TEXT_SECTIONS
  um: Fix adding '-no-pie' for clang
  kbuild: defconf: use SRCARCH to find merged configs

Pull nfsd fix from Chuck Lever:

 - Fix a recent backchannel timeout fix

* tag 'nfsd-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  NFSv4.1: Assign the right value for initval and retries for rpc timeout

Pull exfat fix from Namjae Jeon:

 - Fix BUG in iov_iter_revert reported from syzbot

* tag 'exfat-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: fix zero the unwritten part for dio read

Pull HID fixes from Benjamin Tissoires:

 - cleanups in the error path in hid-steam (Dan Carpenter)

 - fixes for Wacom tablets selftests that sneaked in while the CI was
   taking a break during the year end holidays (Benjamin Tissoires)

 - null pointer check in nvidia-shield (Kunwu Chan)

 - memory leak fix in hidraw (Su Hui)

 - another null pointer fix in i2c-hid-of (Johan Hovold)

 - another memory leak fix in HID-BPF this time, as well as a double
   fdget() fix reported by Dan Carpenter (Benjamin Tissoires)

 - fix for Cirque touchpad when they go on suspend (Kai-Heng Feng)

 - new device ID in hid-logitech-hidpp: "Logitech G Pro X SuperLight 2"
   (Jiri Kosina)

* tag 'hid-for-linus-2024020101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: bpf: use __bpf_kfunc instead of noinline
  HID: bpf: actually free hdev memory after attaching a HID-BPF program
  HID: bpf: remove double fdget()
  HID: i2c-hid-of: fix NULL-deref on failed power up
  HID: hidraw: fix a problem of memory leak in hidraw_release()
  HID: i2c-hid: Skip SET_POWER SLEEP for Cirque touchpad on system suspend
  HID: nvidia-shield: Add missing null pointer checks to LED initialization
  HID: logitech-hidpp: add support for Logitech G Pro X Superlight 2
  selftests/hid: wacom: fix confidence tests
  HID: hid-steam: Fix cleanup in probe()
  HID: hid-steam: remove pointless error message

Merge tag 'firewire-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fixes from Takashi Sakamoto:
 "FireWire subsystem now supports the legacy layout of configuration
  ROM, while it appears that some of DV devices in the early 2000's have
  the legacy layout with a quirk. This includes some changes to handle
  the quirk"

* tag 'firewire-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: core: search descriptor leaf just after vendor directory entry in root directory
  firewire: core: correct documentation of fw_csr_string() kernel API

Pull spi fix from Mark Brown:
 "One simple fix for a minor but valid issue with constants overflowing
  identified via cppcheck"

* tag 'spi-fix-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: sh-msiof: avoid integer overflow in constants

Merge tag 'regulator-fix-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "The main set of fixes here are for the PWM regulator, fixing
  bootstrapping issues on some platforms where the hardware setup looked
  like it was out of spec for the constraints we have for the regulator
  causing us to make spurious and unhelpful changes to try to bring
  things in line with the constraints.

  There's also a couple of other driver specific fixes"

* tag 'regulator-fix-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator (max5970): Fix IRQ handler
  regulator: ti-abb: don't use devm_platform_ioremap_resource_byname for shared interrupt register
  regulator: pwm-regulator: Manage boot-on with disabled PWM channels
  regulator: pwm-regulator: Calculate the output voltage for disabled PWMs
  regulator: pwm-regulator: Add validity checks in continuous .get_voltage

Pull crypto fixes from Herbert Xu:
 "Fix regressions in caam and qat"

* tag 'v6.8-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: caam - fix asynchronous hash
  crypto: qat - fix arbiter mapping generation algorithm for QAT 402xx

Pull lsm fixes from Paul Moore:
 "Two small patches to fix some problems relating to LSM hook return
  values and how the individual LSMs interact"

* tag 'lsm-pr-20240131' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  lsm: fix default return value of the socket_getpeersec_*() hooks
  lsm: fix the logic in security_inode_getsecctx()

Simon Wunderlich says:

====================
Here are some batman-adv bugfixes:

 - fix a timeout issue and a memory leak in batman-adv multicast,
   by Linus Lüssing (2 patches)

* tag 'batadv-net-pullrequest-20240201' of git://git.open-mesh.org/linux-merge:
  batman-adv: mcast: fix memory leak on deleting a batman-adv interface
  batman-adv: mcast: fix mcast packet type counter on timeouted nodes
====================

Link: https://lore.kernel.org/r/20240201110110.29129-1-sw@simonwunderlich.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

IFLA_DPLL_PIN was added to rt_link messages but not to the spec, which
breaks ynl. Add the missing definitions to the rt_link ynl spec.

Fixes: 5f184269 ("netdev: expose DPLL pin handle for netdevice")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240201113853.37432-1-donald.hunter@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) TCP conntrack now only evaluates window negotiation for packets in
   the REPLY direction, from Ryan Schaefer. Otherwise SYN retransmissions
   trigger incorrect window scale negotiation. From Ryan Schaefer.

2) Restrict tunnel objects to NFPROTO_NETDEV which is where it makes sense
   to use this object type.

3) Fix conntrack pick up from the middle of SCTP_CID_SHUTDOWN_ACK packets.
   From Xin Long.

4) Another attempt from Jozsef Kadlecsik to address the slow down of the
   swap command in ipset.

5) Replace a BUG_ON by WARN_ON_ONCE in nf_log, and consolidate check for
   the case that the logger is NULL from the read side lock section.

6) Address lack of sanitization for custom expectations. Restrict layer 3
   and 4 families to what it is supported by userspace.

* tag 'nf-24-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nft_ct: sanitize layer 3 and 4 protocol number in custom expectations
  netfilter: nf_log: replace BUG_ON by WARN_ON_ONCE when putting logger
  netfilter: ipset: fix performance regression in swap operation
  netfilter: conntrack: check SCTP_CID_SHUTDOWN_ACK for vtag setting in sctp_new
  netfilter: nf_tables: restrict tunnel object to NFPROTO_NETDEV
  netfilter: conntrack: correct window scaling with retransmitted SYN
====================

Link: https://lore.kernel.org/r/20240131225943.7536-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In the arm random config file, kconfig option 'CONFIG_AEABI' is
disabled which results in adding the compiler flag '-mabi=apcs-gnu'.
This causes the compiler to add padding in virtchnl2_ptype
structure to align it to 8 bytes, resulting in the following
size check failure:

include/linux/build_bug.h:78:41: error: static assertion failed: "(6) == sizeof(struct virtchnl2_ptype)"
      78 | #define __static_assert(expr, msg, ...) _Static_assert(expr, msg)
         |                                         ^~~~~~~~~~~~~~
include/linux/build_bug.h:77:34: note: in expansion of macro '__static_assert'
      77 | #define static_assert(expr, ...) __static_assert(expr, ##__VA_ARGS__, #expr)
         |                                  ^~~~~~~~~~~~~~~
drivers/net/ethernet/intel/idpf/virtchnl2.h:26:9: note: in expansion of macro 'static_assert'
      26 |         static_assert((n) == sizeof(struct X))
         |         ^~~~~~~~~~~~~
drivers/net/ethernet/intel/idpf/virtchnl2.h:982:1: note: in expansion of macro 'VIRTCHNL2_CHECK_STRUCT_LEN'
     982 | VIRTCHNL2_CHECK_STRUCT_LEN(6, virtchnl2_ptype);
         | ^~~~~~~~~~~~~~~~~~~~~~~~~~

Avoid the compiler padding by using "__packed" structure
attribute for the virtchnl2_ptype struct. Also align the
structure by using "__aligned(2)" for better code optimization.

Fixes: 0d7502a9 ("virtchnl: add virtchnl version 2 ops")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312220250.ufEm8doQ-lkp@intel.comReviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh  <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240131222241.2087516-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Matthieu Baerts says:

====================
mptcp: fixes for recent issues reported by CI's

This series of 9 patches fixes issues mostly identified by CI's not
managed by the MPTCP maintainers. Thank you Linero (LKFT) and Netdev
maintainers (NIPA) for running our kunit and selftests tests!

For the first patch, it took a bit of time to identify the root cause.
Some MPTCP Join selftest subtests have been "flaky", mostly in slow
environments. It appears to be due to the use of a TCP-specific helper
on an MPTCP socket. A fix for kernels >= v5.15.

Patches 2 to 4 add missing kernel config to support NetFilter tables
needed for IPTables commands. These kconfigs are usually enabled in
default configurations, but apparently not for all architectures.
Patches 2 and 3 can be backported up to v5.11 and the 4th one up to
v5.19.

Patch 5 increases the time limit for MPTCP selftests. It appears that
many CI's execute tests in a VM without acceleration supports, e.g. QEmu
without KVM. As a result, the tests take longer. Plus, there are more
and more tests. This patch modifies the timeout added in v5.18.

Patch 6 reduces the maximum rate and delay of the different links in
some Simult Flows selftest subtests. The goal is to let slow VMs reach
the maximum speed. The original rate was introduced in v5.11.

Patch 7 lets CI changing the prefix of the subtests titles, to be able
to run the same selftest multiple times with different parameters. With
different titles, tests will be considered as different and not override
previous results as it is the case with some CI envs. Subtests have been
introduced in v6.6.

Patch 8 and 9 make some MPTCP Join selftest subtests quicker by stopping
the transfer when the expected events have been seen. Patch 8 can be
backported up to v6.5.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
====================

Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-0-4c1c11e571ff@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since the "Fixes" commits mentioned below, the newly added "userspace
pm" subtests of mptcp_join selftests are launching the whole transfer in
the background, do the required checks, then wait for the end of
transfer.

There is no need to wait longer, especially because the checks at the
end of the transfer are ignored (which is fine). This saves quite a few
seconds on slow environments.

While at it, use 'mptcp_lib_kill_wait()' helper everywhere, instead of
on a specific one with 'kill_tests_wait()'.

Fixes: b2e2248f ("selftests: mptcp: userspace pm create id 0 subflow")
Fixes: e3b47e46 ("selftests: mptcp: userspace pm remove initial subflow")
Fixes: b9fb1760 ("selftests: mptcp: userspace pm send RM_ADDR for ID 0")
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-9-4c1c11e571ff@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since the "Fixes" commit mentioned below, "userspace pm" subtests of
mptcp_join selftests introduced in v6.5 are launching the whole transfer
in the background, do the required checks, then wait for the end of
transfer.

There is no need to wait longer, especially because the checks at the
end of the transfer are ignored (which is fine). This saves quite a few
seconds in slow environments.

Note that old versions will need commit bdbef0a6 ("selftests: mptcp:
add mptcp_lib_kill_wait") as well to get 'mptcp_lib_kill_wait()' helper.

Fixes: 4369c198 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org # 6.5.x: bdbef0a6: selftests: mptcp: add mptcp_lib_kill_wait
Cc: stable@vger.kernel.org # 6.5.x
Reviewed-and-tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-8-4c1c11e571ff@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If a CI executes the same selftest multiple times with different
options, all results from the same subtests will have the same title,
which confuse the CI. With the same title printed in TAP, the tests are
considered as the same ones.

Now, it is possible to override this prefix by using MPTCP_LIB_KSFT_TEST
env var, and have a different title.

While at it, use 'basename' to remove the suffix as well instead of
using an extra 'sed'.

Fixes: c4192967 ("selftests: mptcp: lib: format subtests results in TAP")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-7-4c1c11e571ff@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When running the simult_flow selftest in slow environments -- e.g. QEmu
without KVM support --, the results can be unstable. This selftest
checks if the aggregated bandwidth is (almost) fully used as expected.

To help improving the stability while still keeping the same validation
in place, the BW and the delay are reduced to lower the pressure on the
CPU.

Fixes: 1a418cb8 ("mptcp: simult flow self-tests")
Fixes: 219d0499 ("mptcp: push pending frames when subflow has free space")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-6-4c1c11e571ff@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>