- 11 Jan, 2016 7 commits
-
-
Mauro Carvalho Chehab authored
This logic was broken on the original patch, likely due to a cut-and-paste mistake. Fix it. Signed-off-by:Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
This was depending on broken because we're working at the Media Controller API, with has... issues. As this got fixed, we can re-enable it. Signed-off-by: -
Mauro Carvalho Chehab authored
Currently, media_entity_init() creates an array with the links, allocated at init time. It provides a parameter (extra_links) that would allocate more links than the current needs, but this is not used by any driver. As we want to be able to do dynamic link allocation/removal, we'll need to change the implementation of the links. So, before doing that, let's first remove that extra unused parameter, in order to cleanup the interface first. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Instead of seeking for the decoder every time analog stream is started, cache it. This simplifies the code a little bit. Requested-by:
Hans Verkuil <hverkuil@xs4all.nl> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Rafael Lourenço de Lima Chehab authored
Add support for analog and dvb tv using media controller. Signed-off-by:
Rafael Lourenço de Lima Chehab <chehabrafael@gmail.com> Signed-off-by:
-
Shuah Khan authored
Change to define Media Controller API when CONFIG_MEDIA_CONTROLLER is enabled. Define stubs for CONFIG_MEDIA_CONTROLLER disabled case. This will help avoid drivers needing to enclose Media Controller code within ifdef CONFIG_MEDIA_CONTROLLER block. Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Shuah Khan authored
Add new media controller API to allocate media device as a device resource. When a media device is created on the main struct device which is the parent device for the interface device, it will be available to all drivers associated with that interface. For example, if a usb media device driver creates the media device on the main struct device which is common for all the drivers that control the media device, including the non-media ALSA driver, media controller API can be used to share access to the resources on the media device. This new interface provides the above described feature. A second interface that finds and returns the media device is added to allow drivers to find the media device created by any of the drivers associated with the device. Signed-off-by:
-
- 23 Dec, 2015 16 commits
-
-
Chen-Yu Tsai authored
The driver allocates the spinlock but fails to initialize it correctly. The kernel reports a BUG indicating bad spinlock magic when spinlock debugging is enabled. Call spin_lock_init() on it to initialize it correctly. Fixes: b4e3e59f ("[media] rc: add sunxi-ir driver") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Antti Palosaari authored
Do not remove slave TS NULL padding PID (0x1fff) by default as there is no real need. After that whole TS is passed to kernel sw PID filter. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
It is hard to debug possible I2C failures without knowing the possible register itself. Add register number to error printing. Signed-off-by:
-
Antti Palosaari authored
Return current active rtl2830/rtl2832 register page from the driver cache in order to reduce I2C I/O. Register page is already cached due to I2C write needs. Signed-off-by:
-
Philipp Zabel authored
Hook up the MPEG-2 ES decoder. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Philipp Zabel authored
We could support start streaming with an empty output queue for the BIT decoders due to the bitstream buffer which could still contain data at this point, but there is really no reason for userspace to expect this to work. Simplify the code by disallowing it. Signed-off-by:
-
Philipp Zabel authored
Signed-off-by:
-
Philipp Zabel authored
coda_jpeg_check_buffer only cares about the buffer length and contents, so change the parameter type back from v4l2_vb2_buffer to just the vb2_buffer. Instead of just checking the first and last bytes for the SOI and EOI markers, relax the EOI marker check a bit and allow up to 32 trailing bytes after the EOI marker as hardware generated JPEGs sometimes contain some alignment overhead. Signed-off-by:
-
Philipp Zabel authored
This function is not used outside coda-common.c. Signed-off-by:
-
Andrzej Hajda authored
MFC register addresses are used only by writel/readl macros which already takes care of proper register accessing. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Andrzej Hajda authored
Both macros can be merged into one. Signed-off-by:
-
Andrzej Hajda authored
MFC driver uses dev->irqlock spinlock to protect queues only, but many context fields require protection also - they can be accessed concurrently from IOCTLs and IRQ handler. The patch increases protection range of irqlock to those fields also. Signed-off-by:
-
Andrzej Hajda authored
Many version specific functions are not called by common code, so there is no need to use callbacks. Additionally some of them are not used at all, so they can be safely removed. Signed-off-by:
-
Andrzej Hajda authored
Code for queue cleanup has nothing specific to hardware version. Signed-off-by:
-
Andrzej Hajda authored
Both version of MFC driver use functions with the same body and name. The patch moves them to common location. It also simplifies it. Signed-off-by:
-
Julia Lawall authored
The s5p_mfc_codec_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
- 21 Dec, 2015 2 commits
-
-
Mauro Carvalho Chehab authored
As reported by kmemleak: unreferenced object 0xffff880321e1da40 (size 32): comm "modprobe", pid 3309, jiffies 4295019569 (age 2359.636s) hex dump (first 32 bytes): 47 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 G............... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff82278c8e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8153c08c>] kmem_cache_alloc_trace+0x1ec/0x280 [<ffffffffa13a896a>] au8522_probe+0x19a/0xa30 [au8522_decoder] [<ffffffff81de0032>] i2c_device_probe+0x2b2/0x490 [<ffffffff81ca7004>] driver_probe_device+0x454/0xd90 [<ffffffff81ca7c1b>] __device_attach_driver+0x17b/0x230 [<ffffffff81ca15da>] bus_for_each_drv+0x11a/0x1b0 [<ffffffff81ca6a4d>] __device_attach+0x1cd/0x2c0 [<ffffffff81ca7d43>] device_initial_probe+0x13/0x20 [<ffffffff81ca451f>] bus_probe_device+0x1af/0x250 [<ffffffff81c9e0f3>] device_add+0x943/0x13b0 [<ffffffff81c9eb7a>] device_register+0x1a/0x20 [<ffffffff81de8626>] i2c_new_device+0x5d6/0x8f0 [<ffffffffa0d88ea4>] v4l2_i2c_new_subdev_board+0x1e4/0x250 [v4l2_common] [<ffffffffa0d88fe7>] v4l2_i2c_new_subdev+0xd7/0x110 [v4l2_common] [<ffffffffa13b2f76>] au0828_card_analog_fe_setup+0x2e6/0x3f0 [au0828] Checking where the error happens: (gdb) list *au8522_probe+0x19a 0x99a is in au8522_probe (drivers/media/dvb-frontends/au8522_decoder.c:761). 756 printk(KERN_INFO "au8522_decoder attach existing instance.\n"); 757 break; 758 } 759 760 demod_config = kzalloc(sizeof(struct au8522_config), GFP_KERNEL); 761 if (demod_config == NULL) { 762 if (instance == 1) 763 kfree(state); 764 return -ENOMEM; 765 } Shows that the error path is not being handled properly. The are actually several issues here: 1) config free should have been calling hybrid_tuner_release_state() function, by calling au8522_release_state(); 2) config is only allocated at the digital part. On the analog one, it is received from the caller. A complex logic could be added to address it, however, it is simpler to just embeed config inside the state. Signed-off-by: -
Mauro Carvalho Chehab authored
As reported by kmemleak: unreferenced object 0xffff8802adae0ba0 (size 192): comm "modprobe", pid 3024, jiffies 4296503588 (age 324.368s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff c0 48 25 a0 ff ff ff ff .........H%..... backtrace: [<ffffffff82278c8e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8153c08c>] kmem_cache_alloc_trace+0x1ec/0x280 [<ffffffffa0250f0d>] ir_lirc_register+0x8d/0x7a0 [ir_lirc_codec] [<ffffffffa07372b8>] ir_raw_event_register+0x318/0x4b0 [rc_core] [<ffffffffa07351ed>] rc_register_device+0xf2d/0x1450 [rc_core] [<ffffffffa13c5451>] au0828_rc_register+0x7d1/0xa10 [au0828] [<ffffffffa13b0dc2>] au0828_usb_probe+0x6c2/0xcf0 [au0828] [<ffffffff81d7619d>] usb_probe_interface+0x45d/0x940 [<ffffffff81ca7004>] driver_probe_device+0x454/0xd90 [<ffffffff81ca7a61>] __driver_attach+0x121/0x160 [<ffffffff81ca141f>] bus_for_each_dev+0x11f/0x1a0 [<ffffffff81ca5d4d>] driver_attach+0x3d/0x50 [<ffffffff81ca5039>] bus_add_driver+0x4c9/0x770 [<ffffffff81ca944c>] driver_register+0x18c/0x3b0 [<ffffffff81d71e58>] usb_register_driver+0x1f8/0x440 [<ffffffffa13680b7>] 0xffffffffa13680b7 0xf3d is in ir_lirc_register (drivers/media/rc/ir-lirc-codec.c:348). 343 drv = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL); 344 if (!drv) 345 return rc; 346 347 rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL); 348 if (!rbuf) 349 goto rbuf_alloc_failed; 350 351 rc = lirc_buffer_init(rbuf, sizeof(int), LIRCBUF_SIZE); 352 if (rc) Signed-off-by:
-
- 18 Dec, 2015 15 commits
-
-
Dan Carpenter authored
Smatch is not smart enough to see that "&stream->clock.lock" and "&clock->lock" are the same thing so it complains about the locking here. Let's make it more consistent. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Anton V. Shokurov authored
V4L2_CID_EXPOSURE_ABSOLUTE property does not return an updated value when autoexposure (V4L2_CID_EXPOSURE_AUTO) is turned on. This patch fixes this issue by adding the UVC_CTRL_FLAG_AUTO_UPDATE flag. Tested on a C920 camera. Signed-off-by:
Anton V. Shokurov <shokurov.anton.v@yandex.ru> Signed-off-by:
-
Mauro Carvalho Chehab authored
Smatch complains about where the au8293_data is placed: drivers/media/pci/cx23885/cx23885-dvb.c:2174 dvb_register() info: 'a8293_pdata' is not actually initialized (unreached code). It is not actually expected to have such initialization at switch { foo = bar; case: ... } Not really sure how gcc does that, but this is something that I would expect that different compilers would do different things. David Howells checked with the compiler people: it's not really expected to initialise as expected. So, move the initialization outside the switch(), making smatch to shut up one warning. Acked-by:David Howells <dhowells@redhat.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/pci/cx23885/cx23885-dvb.c:2174 dvb_register() info: 'a8293_pdata' is not actually initialized (unreached code). Signed-off-by: -
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/v4l2-core/videobuf2-core.c:2415 __vb2_init_fileio() warn: possible memory leak of 'fileio' While here, avoid the usage of sizeof(struct foo_struct). Signed-off-by: -
Hans Verkuil authored
The handling of q->plane_sizes was wrong in vb2_core_create_bufs(). The q->plane_sizes array was global and it was overwritten by create_bufs. So if reqbufs was called with e.g. size 100000 then q->plane_sizes[0] would be set to 100000. If create_bufs was called afterwards with size 200000, then q->plane_sizes[0] would be overwritten with the new value. Calling create_bufs again for size 100000 would cause an error since 100000 is now less than q->plane_sizes[0]. This patch fixes this problem by 1) removing q->plane_sizes and using the vb->planes[].length field instead, and 2) by introducing a min_length field in struct vb2_plane. This field is set to the plane size as returned by the queue_setup op and is the minimum required plane size. So user pointers or dmabufs should all be at least this size. Signed-off-by:
-
Hans Verkuil authored
Ensure that the offsets are correct before buf_init() is called. As a consequence the __setup_offsets() function now sets up the offsets for the given buffer instead of for all new buffers. Signed-off-by:
-
Hans Verkuil authored
Fill in q->bufs[vb->index] before the call to buf_init: it makes sense that this is initialized correctly. Signed-off-by:
-
Hans Verkuil authored
Rather than setting up the lengths at the end, set them up when the vb2_buffer is allocated. This also ensures that buf_init() sees the right length values. Signed-off-by:
-
Hans Verkuil authored
This ops can never fail, so make these void functions. Signed-off-by:
-
Hans Verkuil authored
This module is no longer V4L2 specific, so update the module description accordingly. Signed-off-by:
-
Junghak Sung authored
Move things related with vb2 file I/O and vb2_thread without doing any functional changes. After that, videobuf2-internal.h is removed because it is not necessary any more. Signed-off-by:
Junghak Sung <jh1009.sung@samsung.com> Signed-off-by:
Geunyoung Kim <nenggun.kim@samsung.com> Acked-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by:
Inki Dae <inki.dae@samsung.com> Acked-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Junghak Sung authored
Replace v4l2-stuffs with common things in struct vb2_fileio_data and vb2_thread(). Signed-off-by:
-
Junghak Sung authored
The location in which last_buffer_queued is set is moved to fill_v4l2_buffer(). So, __vb2_perform_fileio() can use vb2_core_dqbuf() instead of vb2_internal_dqbuf(). Signed-off-by:
-
Junghak Sung authored
Separate vb2_poll() into core and v4l2 part. Signed-off-by:
-
