- 22 Jul, 2007 40 commits
-
-
Keith Owens authored
kstat_irqs(0) includes the count of interrupt 0 from all cpus, not just the current cpu. The updated interrupt 0 on other cpus can stop the nmi_watchdog from tripping, so only include the current cpu's int 0. Signed-off-by:
Keith Owens <kaos@ocs.com.au> Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andi Kleen authored
This mainly changes the nops for alternative, so not very revolutionary. Signed-off-by:
-
Andi Kleen authored
Previously this flag was only used on 32bit, but some shared code can use it now. Signed-off-by:
-
Andi Kleen authored
Fix WARNING: arch/i386/kernel/built-in.o(.text+0xdd0d): Section mismatch: reference to .init.data:cpu_llc_id (between 'set_cpu_sibling_map' and 'initialize_secondary') WARNING: arch/i386/kernel/built-in.o(.text+0xdd1b): Section mismatch: reference to .init.data:cpu_llc_id (between 'set_cpu_sibling_map' and 'initialize_secondary') Signed-off-by:
-
Andi Kleen authored
When a machine check or NMI occurs while multiple byte code is patched the CPU could theoretically see an inconsistent instruction and crash. Prevent this by temporarily disabling MCEs and returning early in the NMI handler. Based on discussion with Mathieu Desnoyers. Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by:
-
Andi Kleen authored
Reenable kprobes and alternative patching when the kernel text is write protected by DEBUG_RODATA Add a general utility function to change write protected text. The new function remaps the code using vmap to write it and takes care of CPU synchronization. It also does CLFLUSH to make icache recovery faster. There are some limitations on when the function can be used, see the comment. This is a newer version that also changes the paravirt_ops code. text_poke also supports multi byte patching now. Contains bug fixes from Zach Amsden and suggestions from Mathieu Desnoyers. Cc: Jan Beulich <jbeulich@novell.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Zach Amsden <zach@vmware.com> Signed-off-by:
-
Glauber de Oliveira Costa authored
This patch uses the read and write functions provided at system.h for control registers instead of writting raw assembly over and over again in .c files. Functions to manipulate cr2 and cr8 were provided, as they were lacking. Also, removed some extra space after closing brackets Signed-off-by:
Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by:
-
Masoud Asgharifard Sharbiani authored
This patch makes the i386 behave the same way that x86_64 does when a segfault happens. A line gets printed to the kernel log so that tools that need to check for failures can behave more uniformly between debug.show_unhandled_signals sysctl variable to 0 (or by doing echo 0 > /proc/sys/debug/exception-trace) Also, all of the lines being printed are now using printk_ratelimit() to deny the ability of DoS from a local user with a program like the following: main() { while (1) if (!fork()) *(int *)0 = 0; } This new revision also includes the fix that Andrew did which got rid of new sysctl that was added to the system in earlier versions of this. Also, 'show-unhandled-signals' sysctl has been renamed back to the old 'exception-trace' to avoid breakage of people's scripts. AK: Enabling by default for i386 will be likely controversal, but let's see what happens AK: Really folks, before complaining just fix your segfaults AK: I bet this will find a lot of silent issues Signed-off-by:Masoud Sharbiani <masouds@google.com> Signed-off-by:
-
Al Viro authored
Fix a mismerge in commit 8b6f50ef: "spufs: make signal-notification files readonly for NOSCHED contexts", where structs got duplicated. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Acked-by:
Jeremy Kerr <jk@ozlabs.org> Signed-off-by:
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET]: Add missing entries to family name tables [NET]: Make NETDEVICES depend on NET. [IPV6]: endianness bug in ip6_tunnel [IrDA]: TOSHIBA_FIR depends on virt_to_bus [IrDA]: EP7211 IR driver port to the latest SIR API [IrDA] Typo fix in irnetlink.c copyright [NET]: Fix loopback crashes when multiqueue is enabled. [IPV4]: Fix inetpeer gcc-4.2 warnings
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: ERROR: "sys_ioctl" [arch/sparc64/solaris/solaris.ko] undefined! [SPARC32]: Make PAGE_SHARED a read-mostly variable. [SPARC32]: Take enable_irq/disable_irq out of line. [SPARC32]: clean include/asm-sparc/irq.h [SPARC32]: Fix rounding errors in ndelay/udelay implementation.
-
David Howells authored
Add missing entries to af_family_clock_key_strings[]. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
From: Christoph Hellwig <hch@infradead.org> On Fri, Jul 20, 2007 at 09:24:42AM -0400, Horst H. von Brand wrote: > When building v2.6.22-3478-g275afcac on sparc64 (.config attached) I get: > > MODPOST vmlinux > Building modules, stage 2. > MODPOST 463 modules > ERROR: "sys_ioctl" [arch/sparc64/solaris/solaris.ko] undefined! Sorry, my fault. It looked to me like sparc64 exports sys_ioctl on it's own, but it only exports compat_sys_ioctl on it's own. Signed-off-by:
-
Al Viro authored
same scheme as for sparc64, same rationale Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Move stuff used only by arch/sparc/kernel/* into arch/sparc/kernel/irq.h and into individual files in there (e.g. macros internal to sun4m_irq.c, etc.) Signed-off-by:
-
Mark Fortescue authored
__ndelay and __udelay have not been delayung >= specified time. The problem with __ndelay has been tacked down to the rounding of the multiplier constant. By changing this, delays > app 18us are correctly calculated. The problem with __udelay has also been tracked down to rounding issues. Changing the multiplier constant (to match that used in sparc64) corrects for large delays and adding in a rounding constant corrects for trunctaion errors in the claculations. Many short delays will return without looping. This is not an error as there is the fixed delay of doing all the maths to calculate the loop count. Signed-off-by:
Mark Fortescue <mark@mtfhpc.demon.co.uk> Signed-off-by:
-
Jan Engelhardt authored
Enabling drivers from "Devices > Networking" (in menuconfig), for example SLIP and/or PLIP, throws link time errors when CONFIG_NET itself is =n. Have CONFIG_NETDEVICES depend on CONFIG_NET. Signed-off-by:
Jan Engelhardt <jengelh@gmx.de> Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Samuel Ortiz <samuel@sortiz.org> Signed-off-by:
-
Samuel Ortiz authored
The EP7211 SIR driver was the only one left without a new SIR API port. Signed-off-by:
-
Samuel Ortiz authored
Signed-off-by:
-
Muli Ben-Yehuda authored
This patch introduces struct pci_sysdata to x86 and x86-64, and converts the existing two users (NUMA, Calgary) to use it. This lays the groundwork for having other users of sysdata, such as the PCI domains work. The Calgary bits are tested, the NUMA bits just look ok. Signed-off-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by:
-
Joachim Deguara authored
This makes k8topology multicore aware instead of limited to signle- and dual-core CPUs. It uses the CPUID to be more future proof. Signed-off-by:
Joachim Deguara <joachim.deguara@amd.com> Signed-off-by:
-
Jan Beulich authored
Leftovers from the removal of the more general (but abandoned) SMP alternatives. Signed-off-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
-
Robert P. J. Day authored
Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Signed-off-by:
-
Stefan Richter authored
Dead or misnamed CONFIG_BALANCED_IRQ_DEBUG found by Robert P. J. Day. It's not a Kconfig variable. Since this debug code is ancient, I suggest to get rid of this misleading CONFIG_ macro by deleting all of this debug code. Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Robert P. J. Day" <rpjday@mindspring.com> Signed-off-by:
-
Aaron Durbin authored
Insert HPET resources after pci probing has been completed in order to avoid resource conflicts with PCI resource reservation. With this change the HPET firmware resources will be identified, but it should also not cause issues when the HPET address falls on a BAR in a PCI device, and the PCI enumeration cannot reserve the resources. Signed-off-by:
Aaron Durbin <adurbin@google.com> Cc: john stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Len Brown <lenb@kernel.org> Signed-off-by:
-
Andres Salomon authored
This builds upon the existing geode infrastructure, but adds southbridge support, some GPIO functions, and a header file (asm-i386/geode.h) with some useful GX/LX detection tests. The majority of this code was written by Jordan Crouse. Signed-off-by:
Jordan Crouse <jordan.crouse@amd.com> Signed-off-by:
Andres Salomon <dilinger@debian.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Dan Aloni authored
Signed-off-by:
Dan Aloni <da-x@monatomic.org> Signed-off-by:
-
Dan Aloni authored
Users that use kernel log filtering (e.g. via syslogd or a proprietry method) wouldn't like to see warning prints that are not really warnings. Signed-off-by:
-
Jeremy Fitzhardinge authored
get_vm_area always returns an area with an adjacent guard page. That guard page is included in vm_struct.size. iounmap uses vm_struct.size to determine how much address space needs to have change_page_attr applied to it, which will BUG if applied to the guard page. This patch adds a helper function - get_vm_area_size() in linux/vmalloc.h - to return the actual size of a vm area, and uses it to make iounmap do the right thing. There are probably other places which should be using get_vm_area_size(). Thanks to Dave Young <hidave.darkstar@gmail.com> for debugging the problem. [ Andi, it wasn't clear to me whether x86_64 needs the same fix. ] Signed-off-by:
Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
-
Thomas Gleixner authored
setup_pit_timer is declared in asm-i386/timer.h. Move it to the pit header file, so it can be used by x86_64 as well. Move also the PIT constants. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by:
-
Chris Wright authored
I fixed this in x86_64. Looks like the kind of thing that will break voyager on i386. Signed-off-by:
Chris Wright <chrisw@sous-sol.org> Signed-off-by:
-
Thomas Gleixner authored
Remove the volatile in apic. We have a cpu_relax() in the wait loop. Fix a coding style issue while at it. Signed-off-by:
-
Yinghai Lu authored
[akpm@linux-foundation.org: build fix] Signed-off-by:
Yinghai Lu <yinghai.lu@sun.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
David Rientjes authored
When NUMA emulation succeeds, acpi_numa needs to be set to -1 so that srat_disabled() will always return true. We won't be calling acpi_scan_nodes() or registering the true nodes we've found. [hugh@veritas.com: Fix x86_64 CONFIG_NUMA_EMU build: acpi_numa needs CONFIG_ACPI_NUMA] Signed-off-by:
David Rientjes <rientjes@google.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
David Rientjes authored
e820_hole_size() now uses the newly extracted helper function, e820_find_active_region(), to determine the size of usable RAM in a range of PFN's. This was previously broken because of two reasons: - The start and end PFN's of each e820 entry were not properly rounded prior to excluding those entries in the range, and - Entries smaller than a page were not properly excluded from being accumulated. This resulted in emulated nodes being incorrectly mapped to ranges that were completely reserved and not candidates for being registered as active ranges. Signed-off-by:
-
Yinghai Lu authored
For K8 system: 4G RAM with memory hole remapping enabled, or more than 4G RAM installed. when using kexec to load second kernel. In the second kernel, when mem is allocated for GART, it will do the memset for clear, it will cause restart, because some device still used that for dma. solution will be: in second kernel: disable that at first before we try to allocate mem for it. or in the first kernel: do disable that before shutdown. Andi/Eric/Alan prefer to second one for clean shutdown in first kernel. Andi also point out need to consider to AGP enable but mem less 4G case too. Signed-off-by:
-
Robert P. J. Day authored
Signed-off-by:
-
