- 24 Mar, 2021 6 commits
-
-
Jay Fang authored
Fix checkpatch error: ERROR: open brace '{' following function definitions go on the next line #545: FILE: spi-dln2.c:545: +static int dln2_spi_rdwr(struct dln2_spi *dln2, const u8 *tx_data, + u8 *rx_data, u16 data_len, u8 attr) { Signed-off-by:Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1616566602-13894-7-git-send-email-f.fangjian@huawei.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Jay Fang authored
Fix checkpatch error: ERROR: space required before the open parenthesis '(' #295: FILE: spi-mtk-nor.c:295: + switch(op->data.dir) { Signed-off-by: -
Jay Fang authored
Fix checkpatch errors: ERROR: space prohibited before that ',' (ctx:WxW) #113: FILE: spi-omap-100k.c:113: + writew(data , spi100k->base + SPI_TX_MSB); ^ ERROR: space prohibited before that ',' (ctx:WxW) #249: FILE: spi-omap-100k.c:249: + writew(0x3e , spi100k->base + SPI_SETUP1); ^ ERROR: space prohibited before that ',' (ctx:WxW) #250: FILE: spi-omap-100k.c:250: + writew(0x00 , spi100k->base + SPI_STATUS); ^ ERROR: space prohibited before that ',' (ctx:WxW) #251: FILE: spi-omap-100k.c:251: + writew(0x3e , spi100k->base + SPI_CTRL); ^ Signed-off-by:
-
Jay Fang authored
Fix checkpatch errors: ERROR: space prohibited before that ',' (ctx:WxW) #255: FILE: spi-pxa2xx-pci.c:255: + ssp->clk = clk_register_fixed_rate(&dev->dev, buf , NULL, 0, ^ ERROR: "foo* bar" should be "foo *bar" #621: FILE: spi-pxa2xx.c:621: +static void int_error_stop(struct driver_data *drv_data, const char* msg) Signed-off-by:
-
Jay Fang authored
Fix checkpatch error: ERROR: space prohibited before that close parenthesis ')' #213: FILE: spi-sprd-adi.c:213: + rd_addr = (val & RD_ADDR_MASK ) >> RD_ADDR_SHIFT; Signed-off-by:
-
Jay Fang authored
Fix checkpatch error: ERROR: space prohibited before that '++' (ctx:WxB) #1204: FILE: spi-topcliff-pch.c:1204: + for (i = 0; i < cnt; i ++) { ^ Signed-off-by:
-
- 23 Mar, 2021 4 commits
-
-
Leilk Liu authored
this patch adds mt8195 spi slave compatible support. Signed-off-by:
Leilk Liu <leilk.liu@mediatek.com> Link: https://lore.kernel.org/r/20210322055244.30179-5-leilk.liu@mediatek.comSigned-off-by:
-
Leilk Liu authored
this patch adds max_fifo_size and must_rx compat support. Signed-off-by:
-
Leilk Liu authored
Add a DT binding documentation for the MT8195 soc. Signed-off-by:
-
Leilk Liu authored
Add a DT binding documentation for the MT8195 soc. Signed-off-by:
-
- 19 Mar, 2021 1 commit
-
-
Alain Volmat authored
stm32_spi_remove() accesses the driver's private data after calling spi_unregister_master() even though that function releases the last reference on the spi_master and thereby frees the private data. Fix by switching over to the new devm_spi_alloc_master() helper which keeps the private data accessible until the driver has unbound. Fixes: 8d559a64 ("spi: stm32: drop devres version of spi_register_master") Reported-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1616052290-10887-1-git-send-email-alain.volmat@foss.st.comSigned-off-by:
-
- 17 Mar, 2021 2 commits
-
-
Fabio Estevam authored
"SPI Controller driver" is a too generic description. Make it i.MX specific instead. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210316180922.239805-1-festevam@gmail.comSigned-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210317093936.5572-1-colin.king@canonical.comSigned-off-by:
-
- 16 Mar, 2021 5 commits
-
-
Mark Brown authored
Merge series "spi: Adding support for software nodes" from Heikki Krogerus <heikki.krogerus@linux.intel.com>: Hi, The older API used to supply additional device properties for the devices - so mainly the function device_add_properties() - is going to be removed. The reason why the API will be removed is because it gives false impression that the properties are assigned directly to the devices, which has actually never been the case - the properties have always been assigned to a software fwnode which was then just directly linked with the device when the old API was used. By only accepting device properties instead of complete software nodes, the subsystems remove any change of taking advantage of the other features the software nodes have. The change that is required from the spi subsystem and the drivers is trivial. Basically only the "properties" member in struct spi_board_info, which was a pointer to struct property_entry, is replaced with a pointer to a complete software node. thanks, Heikki Krogerus (4): spi: Add support for software nodes ARM: pxa: icontrol: Constify the software node ARM: pxa: zeus: Constify the software node spi: Remove support for dangling device properties arch/arm/mach-pxa/icontrol.c | 12 ++++++++---- arch/arm/mach-pxa/zeus.c | 6 +++++- drivers/spi/spi.c | 21 ++++++--------------- include/linux/spi/spi.h | 7 +++---- 4 files changed, 22 insertions(+), 24 deletions(-) -- 2.30.1 base-commit: a38fd874
-
Heikki Krogerus authored
>From now on only accepting complete software nodes. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20210303152814.35070-5-heikki.krogerus@linux.intel.comSigned-off-by:
-
Heikki Krogerus authored
When device properties are supplied to the devices, in reality a software fwnode that holds those properties is created which is then assigned to the device. If the device properties are constant the software node can also be constant. Signed-off-by:
-
Heikki Krogerus authored
When device properties are supplied to the devices, in reality a software fwnode that holds those properties is created which is then assigned to the device. If the device properties are constant the software node can also be constant. Signed-off-by:
-
Heikki Krogerus authored
Making it possible for the drivers to assign complete software fwnodes to the devices instead of only the device properties in those nodes. Signed-off-by:
-
- 12 Mar, 2021 12 commits
-
-
Mark Brown authored
Merge series "spi: finalize 'delay_usecs' removal/transition" from Alexandru Ardelean <aardelean@deviqon.com>: A while back I started the introduction of the 'spi_delay' data type: https://lore.kernel.org/linux-spi/20190926105147.7839-1-alexandru.ardelean@analog.com/ Users of the 'delay_usecs' were removed from drivers. Now it's time to remove the 'delay_usecs' from the SPI subsystem and use only the 'delay' field. This changeset adapts all SPI drivers to do without 'delay_usecs'. Additionally, for greybus we need to adapt it to use the 'delay' in nano-seconds and convert it to micro-seconds. Alexandru Ardelean (10): spi: spi-axi-spi-engine: remove usage of delay_usecs spi: bcm63xx-spi: don't check 'delay_usecs' field spi: spi-bcm-qspi: replace 'delay_usecs' with 'delay.value' check spi: spi-sh: replace 'delay_usecs' with 'delay.value' in pr_debug spi: spi-tegra20-flash: don't check 'delay_usecs' field for spi transfer staging: greybus: spilib: use 'spi_delay_to_ns' for getting xfer delay spi: spi-falcon: remove check for 'delay_usecs' spi: fsl-espi: remove usage of 'delay_usecs' field spi: core: remove 'delay_usecs' field from spi_transfer spi: docs: update info about 'delay_usecs' Documentation/spi/spi-summary.rst | 7 +++++-- drivers/spi/spi-axi-spi-engine.c | 12 ++++-------- drivers/spi/spi-bcm-qspi.c | 2 +- drivers/spi/spi-bcm63xx.c | 2 +- drivers/spi/spi-falcon.c | 2 +- drivers/spi/spi-fsl-espi.c | 17 +++++------------ drivers/spi/spi-sh.c | 4 ++-- drivers/spi/spi-tegra20-sflash.c | 3 +-- drivers/spi/spi.c | 1 - drivers/staging/greybus/spilib.c | 5 ++++- include/linux/spi/spi.h | 12 ------------ 11 files changed, 24 insertions(+), 43 deletions(-) -- 2.29.2 _______________________________________________ devel mailing list devel@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
-
Alain Volmat authored
Avoid CONFIG_PM preprocessor check for pm suspend/resume callbacks and identify the functions with __maybe_unused. Signed-off-by:
-
Alexandru Ardelean authored
The 'delay_usecs' field is no longer present on the spi_transfer struct. This change updates the doc to mention the usage of the (relatively) new 'delay' field. Signed-off-by:
Alexandru Ardelean <aardelean@deviqon.com> Link: https://lore.kernel.org/r/20210308145502.1075689-11-aardelean@deviqon.comSigned-off-by:
-
Alexandru Ardelean authored
The 'delay' field in the spi_transfer struct is meant to replace the 'delay_usecs' field. However some cleanup was required to remove the uses of 'delay_usecs'. Now that it's been cleaned up, we can remove it from the kernel tree. Signed-off-by:
-
Alexandru Ardelean authored
The 'delay_usecs' field is being removed from the spi_transfer struct. This change removes it from the SPI FSL ESPI driver. Signed-off-by:
-
Alexandru Ardelean authored
The 'delay_usecs' field is being removed from the spi_transfer struct. This change removes it from the SPI Falcon driver. Signed-off-by:
-
Alexandru Ardelean authored
The intent is the removal of the 'delay_usecs' field from the spi_transfer struct, as there is a 'delay' field that does the same thing. The spi_delay_to_ns() can be used to get the transfer delay. It works by using the 'delay_usecs' field first (if it is non-zero), and finally uses the 'delay' field. Since the 'delay_usecs' field is going away, this change makes use of the spi_delay_to_ns() function. This also means dividing the return value of the function by 1000, to convert it to microseconds. To prevent any potential faults when converting to microseconds and since the result of spi_delay_to_ns() is int, the delay is being computed in 32 bits and then clamped between 0 & U16_MAX. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Acked-by:
Rui Miguel Silva <rmfrfs@gmail.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210308145502.1075689-7-aardelean@deviqon.comSigned-off-by:
-
Alexandru Ardelean authored
The 'delay_usecs' field was handled for backwards compatibility in case there were some users that still configured SPI delay transfers with this field. They should all be removed by now. So we can remove the 'delay_usecs' handling in this driver. Signed-off-by:
-
Alexandru Ardelean authored
The 'delay_usecs' field is going away. The replacement for it is the 'delay' field. So, we should print the 'delay.value' value instead. Signed-off-by:
-
Alexandru Ardelean authored
The 'delay_usecs' field is going away. The replacement for it is the 'delay' field. So, we should check for 'delay.value' being non-zero. Signed-off-by:
-
Alexandru Ardelean authored
The 'delay_usecs' field was handled for backwards compatibility in case there were some users that still configured SPI delay transfers with this field. They should all be removed by now. Signed-off-by:
-
Alexandru Ardelean authored
The 'delay_usecs' field was handled for backwards compatibility in case there were some users that still configured SPI delay transfers with this field. They should all be removed by now. Signed-off-by:
-
- 10 Mar, 2021 10 commits
-
-
Jay Fang authored
drivers/spi/spi-cadence-quadspi.c:267:18: warning: Shifting signed 32-bit value by 31 bits is undefined behaviour [shiftTooManyBitsSigned] return reg & (1 << CQSPI_REG_CONFIG_IDLE_LSB); ^ Reported-by:kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Mark Brown authored
Merge series "parport: Introduce module_parport_driver() and use it" from Andy Shevchenko <andriy.shevchenko@linux.intel.com>: Introduce module_parport_driver() and use it. Greg or Mark, since we have this series tagged, can somebody of you pick it up? Changelog v3: - added tag on patch 1 (Sudip) - Cc'ed to Greg Andy Shevchenko (3): parport: Introduce module_parport_driver() helper macro spi: butterfly: Switch to use module_parport_driver() spi: lm70llp: Switch to use module_parport_driver() drivers/spi/spi-butterfly.c | 13 +------------ drivers/spi/spi-lm70llp.c | 13 +------------ include/linux/parport.h | 12 +++++++++++- 3 files changed, 13 insertions(+), 25 deletions(-) base-commit: fe07bfda -- 2.30.1
-
Mason Zhang authored
this patch update spi document for MT6779 SOC. Signed-off-by:
Mason Zhang <Mason.Zhang@mediatek.com> Link: https://lore.kernel.org/r/20210226110109.30500-1-Mason.Zhang@mediatek.comSigned-off-by:
-
Kuldeep Singh authored
Add support for nxp,imx8dxl-fspi, do the bindings document. Signed-off-by:
Kuldeep Singh <kuldeep.singh@nxp.com> Link: https://lore.kernel.org/r/20210302124936.1972546-3-kuldeep.singh@nxp.comSigned-off-by:
-
Kuldeep Singh authored
Errata ERR050568 description says that "Flash access by FlexSPI AHB command may not work with platform frequency equal to 300 MHz" on LS1028A. By default, smaller length reads(equal to RX FIFO size) are done by IP bus and larger length reads using AHB bus. For adding errata workaround, use IP bus to read entire flash contents and disable AHB path when platform frequency is 300Mhz. Signed-off-by:
-
Han Xu authored
Add driver support for imx8dxl which support read through IP bus only and disable AHB bus due to an IC errata. Use the pre-defined quirk FSPI_QUIRK_USE_IP_ONLY directly in device-type data to disable AHB read. Signed-off-by:
Han Xu <han.xu@nxp.com> Signed-off-by:
-
Kuldeep Singh authored
Add support for disabling AHB bus and read entire flash contents via IP bus only. Please note, this enables IP bus read using a quirk which can be enabled directly in device-type data or in existence of an errata where AHB bus may need to be disabled. Signed-off-by:
-
Junlin Yang authored
Fix OF node leaks by calling of_node_put in for_each_available_child_of_node when the cycle returns. Generated by: scripts/coccinelle/iterators/for_each_child.cocci Signed-off-by:
Junlin Yang <yangjunlin@yulong.com> Link: https://lore.kernel.org/r/20210215110425.1012-1-angkery@163.comSigned-off-by:
-
Tudor Ambarus authored
The DMA cap mask is no longer used since: commit 7758e390 ("spi: atmel: remove compat for non DT board when requesting dma chan") Drop it now. Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20210218132840.131898-1-tudor.ambarus@microchip.comSigned-off-by:
-
Arnd Bergmann authored
Building this file with clang leads to a an unreachable code path causing a warning from objtool: drivers/spi/spi-rockchip.o: warning: objtool: rockchip_spi_transfer_one()+0x2e0: sibling call from callable instruction with modified stack frame Change the unreachable() into an error return that can be handled if it ever happens, rather than silently crashing the kernel. Fixes: 65498c6a ("spi: rockchip: support 4bit words") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20210226140109.3477093-1-arnd@kernel.orgSigned-off-by:
-
