Pull USB/PHY fixes from Greg KH:
 "Here are a number of USB and PHY driver fixes for 5.5-rc6

  Nothing all that unusual, just the a bunch of small fixes for a lot of
  different reported issues. The PHY driver fixes are in here as they
  interacted with the usb drivers.

  Full details of the patches are in the shortlog, and all of these have
  been in linux-next with no reported issues"

* tag 'usb-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
  usb: missing parentheses in USE_NEW_SCHEME
  usb: ohci-da8xx: ensure error return on variable error is set
  usb: musb: Disable pullup at init
  usb: musb: fix idling for suspend after disconnect interrupt
  usb: typec: ucsi: Fix the notification bit offsets
  USB: Fix: Don't skip endpoint descriptors with maxpacket=0
  USB-PD tcpm: bad warning+size, PPS adapters
  phy/rockchip: inno-hdmi: round clock rate down to closest 1000 Hz
  usb: chipidea: host: Disable port power only if previously enabled
  usb: cdns3: should not use the same dev_id for shared interrupt handler
  usb: dwc3: gadget: Fix request complete check
  usb: musb: dma: Correct parameter passed to IRQ handler
  usb: musb: jz4740: Silence error if code is -EPROBE_DEFER
  usb: udc: tegra: select USB_ROLE_SWITCH
  USB: core: fix check for duplicate endpoints
  phy: cpcap-usb: Drop extra write to usb2 register
  phy: cpcap-usb: Improve host vs docked mode detection
  phy: cpcap-usb: Prevent USB line glitches from waking up modem
  phy: mapphone-mdm6600: Fix uninitialized status value regression
  phy: cpcap-usb: Fix flakey host idling and enumerating of devices
  ...

Pull char/misc fix from Greg KH:
 "Here is a single fix, for the chrdev core, for 5.5-rc6

  There's been a long-standing race condition triggered by syzbot, and
  occasionally real people, in the chrdev open() path. Will finally took
  the time to track it down and fix it for real before the holidays.

  Here's that one patch, it's been in linux-next for a while with no
  reported issues and it does fix the reported problem"

* tag 'char-misc-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  chardev: Avoid potential use-after-free in 'chrdev_open()'

Pull staging fixes from Greg KH:
 "Here are some small staging driver fixes for 5.5-rc6.

  Nothing major here, just some small fixes for a comedi driver, the
  vt6656 driver, and a new device id for the rtl8188eu driver.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: rtl8188eu: Add device code for TP-Link TL-WN727N v5.21
  staging: comedi: adv_pci1710: fix AI channels 16-31 for PCI-1713
  staging: vt6656: set usb_set_intfdata on driver fail.
  staging: vt6656: remove bool from vnt_radio_power_on ret
  staging: vt6656: limit reg output to block size
  staging: vt6656: correct return of vnt_init_registers.
  staging: vt6656: Fix non zero logical return of, usb_control_msg

Pull tty/serial fixes from Greg KH:
 "Here are two tty/serial driver fixes for 5.5-rc6.

  The first fixes a much much reported issue with a previous tty port
  link patch that is in your tree, and the second fixes a problem where
  the serdev driver would claim ACPI devices that it shouldn't be
  claiming.

  Both have been in linux-next for a while with no reported issues"

* tag 'tty-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serdev: Don't claim unsupported ACPI serial devices
  tty: always relink the port

Pull block fixes from Jens Axboe:
 "A few fixes that should go into this round.

  This pull request contains two NVMe fixes via Keith, removal of a dead
  function, and a fix for the bio op for read truncates (Ming)"

* tag 'block-5.5-2020-01-10' of git://git.kernel.dk/linux-block:
  nvmet: fix per feat data len for get_feature
  nvme: Translate more status codes to blk_status_t
  fs: move guard_bio_eod() after bio_set_op_attrs
  block: remove unused mp_bvec_last_segment

Pull io_uring fix from Jens Axboe:
 "Single fix for this series, fixing a regression with the short read
  handling.

  This just removes it, as it cannot safely be done for all cases"

* tag 'io_uring-5.5-2020-01-10' of git://git.kernel.dk/linux-block:
  io_uring: remove punt of short reads to async context

Pull MTD fixes from Miquel Raynal:
 "MTD:
   - sm_ftl: Fix NULL pointer warning.

  Raw NAND:
   - Cadence: fix compile testing.
   - STM32: Avoid locking.

  Onenand:
   - Fix several sparse/build warnings.

  SPI-NOR:
   - Add a flag to fix interaction with Micron parts"

* tag 'mtd/fixes-for-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: spi-nor: Fix the writing of the Status Register on micron flashes
  mtd: sm_ftl: fix NULL pointer warning
  mtd: onenand: omap2: Pass correct flags for prep_dma_memcpy
  mtd: onenand: samsung: Fix iomem access with regular memcpy
  mtd: onenand: omap2: Fix errors in style
  mtd: cadence: Fix cast to pointer from integer of different size warning
  mtd: rawnand: stm32_fmc2: avoid to lock the CPU bus

Pull sound fixes from Takashi Iwai:
 "A few piled ASoC fixes and usual HD-audio and USB-audio fixups. Some
  of them are for ASoC core error-handling"

* tag 'sound-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda: enable regmap internal locking
  ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen
  ALSA: hda/realtek - Set EAPD control to default for ALC222
  ALSA: usb-audio: Apply the sample rate quirk for Bose Companion 5
  ALSA: hda/realtek - Add new codec supported for ALCS1200A
  ASoC: Intel: boards: Fix compile-testing RT1011/RT5682
  ASoC: SOF: imx8: Fix dsp_box offset
  ASoC: topology: Prevent use-after-free in snd_soc_get_pcm_runtime()
  ASoC: fsl_audmix: add missed pm_runtime_disable
  ASoC: stm32: spdifrx: fix input pin state management
  ASoC: stm32: spdifrx: fix race condition in irq handler
  ASoC: stm32: spdifrx: fix inconsistent lock state
  ASoC: core: Fix access to uninitialized list heads
  ASoC: soc-core: Set dpcm_playback / dpcm_capture
  ASoC: SOF: imx8: fix memory allocation failure check on priv->pd_dev
  ASoC: SOF: Intel: hda: hda-dai: fix oops on hda_link .hw_free
  ASoC: SOF: fix fault at driver unload after failed probe

Pull thermal fix from Daniel Lezcano:
 "Fix backward compatibility with old DTBs on QCOM tsens (Amit
  Kucheria)"

* tag 'thermal-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  drivers: thermal: tsens: Work with old DTBs

Pull power management fixes from Rafael Wysocki:
 "Prevent the cpufreq-dt driver from probing Tegra20/30 (Dmitry
  Osipenko) and prevent the Intel RAPL power capping driver from
  crashing during CPU initialization due to a NULL pointer dereference
  if the processor model in use is not known to it (Harry Pan)"

* tag 'pm-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  powercap: intel_rapl: add NULL pointer check to rapl_mmio_cpu_online()
  cpufreq: dt-platdev: Blacklist NVIDIA Tegra20 and Tegra30 SoCs

The existing implementation for the get_feature admin-cmd does not
use per-feature data len. This patch introduces a new helper function
nvmet_feat_data_len(), which is used to calculate per feature data len.
Right now we only set data len for fid 0x81 (NVME_FEAT_HOST_ID).

Fixes: commit e9061c39 ("nvmet: Remove the data_len field from the nvmet_req struct")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Amit Engel <amit.engel@dell.com>
[endiness, naming, and kernel style fixes]
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Decode interrupted command and not ready namespace nvme status codes to
BLK_STS_TARGET. These are not generic IO errors and should use a non-path
specific error so that it can use the non-failover retry path.
Reported-by: John Meneghini <John.Meneghini@netapp.com>
Cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

* powercap:
  powercap: intel_rapl: add NULL pointer check to rapl_mmio_cpu_online()

Pull pstore fix from Kees Cook:
 "Cengiz Can forwarded a Coverity report about more problems with a rare
  pstore initialization error path, so the allocation lifetime was
  rearranged to avoid needing to share the kfree() responsibilities
  between caller and callee"

* tag 'pstore-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/ram: Regularize prz label allocation lifetime

Pull drm fixes from Dave Airlie:
 "Pre-LCA pull request I'm not sure how things will look next week,
  myself and Daniel are at LCA and I'm speaking quite late, so if I get
  my talk finished I'll probably process fixes.

  This week has a bunch of i915 fixes, some amdgpu fixes, one sun4i, one
  core MST, and one core fb_helper fix. More details below:

  core:
   - mst Fix NO_STOP_BIT bit offset (Wayne)

  fb_helper:
   - fb_helper: Fix bits_per_pixel param set behavior to round up
     (Geert)

  sun4i:
   - Fix RGB_DIV clock min divider on old hardware (Chen-Yu)

  amdgpu:
   - Stability fix for raven
   - Reduce pixel encoding to if max clock is exceeded on HDMI to allow
     additional high res modes
   - enable DRIVER_SYNCOBJ_TIMELINE for amdgpu

  i915:
   - Fix GitLab issue #446 causing GPU hangs: Do not restore invalid RS
     state
   - Fix GitLab issue #846: Restore coarse power gating that was
     disabled by initial RC66 context corruption security fixes.
   - Revert f6ec9483 ("drm/i915: extend audio CDCLK>=2*BCLK
     constraint to more platforms") to avoid screen flicker
   - Fix to fill in unitialized uabi_instance in virtual engine uAPI
   - Add two missing W/As for ICL and EHL"

* tag 'drm-fixes-2020-01-10' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: add DRIVER_SYNCOBJ_TIMELINE to amdgpu
  drm/amd/display: Reduce HDMI pixel encoding if max clock is exceeded
  Revert "drm/amdgpu: Set no-retry as default."
  drm/fb-helper: Round up bits_per_pixel if possible
  drm/sun4i: tcon: Set RGB DCLK min. divider based on hardware model
  drm/i915/dp: Disable Port sync mode correctly on teardown
  drm/i915: Add Wa_1407352427:icl,ehl
  drm/i915: Add Wa_1408615072 and Wa_1407596294 to icl,ehl
  drm/i915/gt: Restore coarse power gating
  drm/i915/gt: Do not restore invalid RS state
  drm/i915: Limit audio CDCLK>=2*BCLK constraint back to GLK only
  drm/i915/gt: Mark up virtual engine uabi_instance
  drm/dp_mst: correct the shifting in DP_REMOTE_I2C_READ

Pull rdma fixes from Jason Gunthorpe:
 "First RDMA subsystem updates for 5.5-rc. A very small set of fixes,
  most people seem to still be recovering from December!

  Five small driver fixes:

   - Fix error flow with MR allocation in bnxt_re

   - An errata work around for bnxt_re

   - Misuse of the workqueue API in hfi1

   - Protocol error in hfi1

   - Regression in 5.5 related to the mmap rework with i40iw"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  i40iw: Remove setting of VMA private data and use rdma_user_mmap_io
  IB/hfi1: Adjust flow PSN with the correct resync_psn
  IB/hfi1: Don't cancel unused work item
  RDMA/bnxt_re: Fix Send Work Entry state check while polling completions
  RDMA/bnxt_re: Avoid freeing MR resources if dereg fails

Merge tag 'drm-intel-fixes-2020-01-09-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix GitLab issue #446 causing GPU hangs: Do not restore invalid RS state
- Fix GitLab issue #846: Restore coarse power gating that was disabled
  by initial RC66 context corruption security fixes.
- Revert f6ec9483 ("drm/i915: extend audio CDCLK>=2*BCLK constraint to more platforms")
  to avoid screen flicker
- Fix to fill in unitialized uabi_instance in virtual engine uAPI
- Add two missing W/As for ICL and EHL
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109133458.GA15558@jlahtine-desk.ger.corp.intel.com

Pull GPIO fixes from Linus Walleij:
 "Here is a host of GPIO fixes for the v5.5 series. The ACPI fix is
  especially important, see summary below and in the commit for details:

   - Select GPIOLIB_IRQCHIP on the max77620 GPIO expander

   - Fix context restore in the Zynq driver

   - Create a new ACPI quirk handler for disabling wakeups on
     problematic hardware.

   - Fix a coding style issue on the mockup device"

* tag 'gpio-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism
  gpiolib: acpi: Turn dmi_system_id table into a generic quirk table
  gpio: zynq: Fix for bug in zynq_gpio_restore_context API
  gpio: max77620: Add missing dependency on GPIOLIB_IRQCHIP
  gpio: mockup: fix coding style

Pull pin control fixes from Linus Walleij:
 "Two fixes for pin control, not much to say about it, it's just regular
  driver fixes:

   - Fix erroneous shift in the Meson driver

   - Make Lochnagar select the GPIOLIB Kconfig symbol"

* tag 'pinctrl-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: meson: Fix wrong shift value when get drive-strength
  pinctrl: lochnagar: select GPIOLIB

Pull input fixes from Dmitry Torokhov:
 "Just a few small fixups here"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: imx_sc_key - only take the valid data from SCU firmware as key state
  Input: add safety guards to input_set_keycode()
  Input: input_event - fix struct padding on sparc64
  Input: uinput - always report EPOLLOUT

Micron flashes do not support 16 bit writes on the Status Register.
According to micron datasheets, when using the Write Status Register
(01h) command, the chip select should be driven LOW and held LOW until
the eighth bit of the last data byte has been latched in, after which
it must be driven HIGH. If CS is not driven HIGH, the command is not
executed, flag status register error bits are not set, and the write enable
latch remains set to 1. This fixes the lock operations on micron flashes.
Reported-by: John Garry <john.garry@huawei.com>
Fixes: 39d1e334 ("mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Tested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

With gcc -O3, we get a new warning:

In file included from arch/arm64/include/asm/processor.h:28,
                 from drivers/mtd/sm_ftl.c:8:
In function 'memset',
    inlined from 'sm_read_sector.constprop' at drivers/mtd/sm_ftl.c:250:3:
include/linux/string.h:411:9: error: argument 1 null where non-null expected [-Werror=nonnull]
  return __builtin_memset(p, c, size);

>From all I can tell, this cannot happen (the function is called
either with a NULL buffer or with a -1 block number but not both),
but adding a check makes it more robust and avoids the warning.

Fixes: mmtom ("init/Kconfig: enable -O3 for all arches")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

The commit converting the driver to DMAengine was missing the flags for
the memcpy prepare call.
It went unnoticed since the omap-dma driver was ignoring them.

Fixes: 3ed6a4d1 (" mtd: onenand: omap2: Convert to use dmaengine for memcp")
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

The __iomem memory should be copied with memcpy_fromio.  This fixes
Sparse warnings like:

    drivers/mtd/nand/onenand/samsung_mtd.c:678:40: warning: incorrect type in argument 2 (different address spaces)
    drivers/mtd/nand/onenand/samsung_mtd.c:678:40:    expected void const *from
    drivers/mtd/nand/onenand/samsung_mtd.c:678:40:    got void [noderef] <asn:2> *[assigned] p
    drivers/mtd/nand/onenand/samsung_mtd.c:679:19: warning: incorrect type in assignment (different address spaces)
    drivers/mtd/nand/onenand/samsung_mtd.c:679:19:    expected void [noderef] <asn:2> *[assigned] p
    drivers/mtd/nand/onenand/samsung_mtd.c:679:19:    got unsigned char *
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Correct mispelling, spacing, and coding style flaws caught by
checkpatch.pl script in the Omap2 Onenand driver .
Signed-off-by: Amir Mahdi Ghorbanian <indigoomega021@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Use dma_addr_t type to pass memory address and control data in
DMA descriptor fields memory_pointer and ctrl_data_ptr
To fix warning: cast to pointer from integer of different size
Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

We are currently using nand_soft_waitrdy to poll the status of the NAND
flash. FMC2 enables the wait feature bit (this feature is mandatory for
the sequencer mode). By enabling this feature, we can't poll the status
of the NAND flash, the read status command is stucked in FMC2 pipeline
until R/B# signal is high, and locks the CPU bus.
To avoid to lock the CPU bus, we poll FMC2 ISR register. This register
reports the status of the R/B# signal.

Fixes: 2cd457f3 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Pull HID fixes from Jiri Kosina:

 - fix for OOB in hiddev, from Dmitry Torokhov

 - _poll API fixes for hidraw, from Marcel Holtmann

 - functional fix for Steam driver, from Rodrigo Rivas Costa

 - a few new device IDs / device-specific quirks and other assorted
   smaller fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: steam: Fix input device disappearing
  HID: intel-ish-hid: ipc: Add Tiger Lake PCI device ID
  drivers/hid/hid-multitouch.c: fix a possible null pointer access.
  HID: wacom: Recognize new MobileStudio Pro PID
  HID: intel-ish-hid: ipc: add CMP device id
  HID: hiddev: fix mess in hiddev_open()
  HID: hid-input: clear unmapped usages
  HID: Add quirk for incorrect input length on Lenovo Y720
  HID: asus: Ignore Asus vendor-page usage-code 0xff events
  HID: ite: Add USB id match for Acer SW5-012 keyboard dock
  HID: Add quirk for Xin-Mo Dual Controller
  HID: Fix slab-out-of-bounds read in hid_field_extract
  HID: multitouch: Add LG MELF0410 I2C touchscreen support
  HID: uhid: Fix returning EPOLLOUT from uhid_char_poll
  HID: hidraw: Fix returning EPOLLOUT from hidraw_poll

Pull networking fixes from David Miller:

 1) Missing netns pointer init in arp_tables, from Florian Westphal.

 2) Fix normal tcp SACK being treated as D-SACK, from Pengcheng Yang.

 3) Fix divide by zero in sch_cake, from Wen Yang.

 4) Len passed to skb_put_padto() is wrong in qrtr code, from Carl
    Huang.

 5) cmd->obj.chunk is leaked in sctp code error paths, from Xin Long.

 6) cgroup bpf programs can be released out of order, fix from Roman
    Gushchin.

 7) Make sure stmmac debugfs entry name is changed when device name
    changes, from Jiping Ma.

 8) Fix memory leak in vlan_dev_set_egress_priority(), from Eric
    Dumazet.

 9) SKB leak in lan78xx usb driver, also from Eric Dumazet.

10) Ridiculous TCA_FQ_QUANTUM values configured can cause loops in fq
    packet scheduler, reject them. From Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
  tipc: fix wrong connect() return code
  tipc: fix link overflow issue at socket shutdown
  netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present
  netfilter: conntrack: dccp, sctp: handle null timeout argument
  atm: eni: fix uninitialized variable warning
  macvlan: do not assume mac_header is set in macvlan_broadcast()
  net: sch_prio: When ungrafting, replace with FIFO
  mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO
  MAINTAINERS: Remove myself as co-maintainer for qcom-ethqos
  gtp: fix bad unlock balance in gtp_encap_enable_socket
  pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM
  tipc: remove meaningless assignment in Makefile
  tipc: do not add socket.o to tipc-y twice
  net: stmmac: dwmac-sun8i: Allow all RGMII modes
  net: stmmac: dwmac-sunxi: Allow all RGMII modes
  net: usb: lan78xx: fix possible skb leak
  net: stmmac: Fixed link does not need MDIO Bus
  vlan: vlan_changelink() should propagate errors
  vlan: fix memory leak in vlan_dev_set_egress_priority
  stmmac: debugfs entry name is not be changed when udev rename device name.
  ...

Commit 85a8ce62 ("block: add bio_truncate to fix guard_bio_eod")
adds bio_truncate() for handling bio EOD. However, bio_truncate()
doesn't use the passed 'op' parameter from guard_bio_eod's callers.

So bio_trunacate() may retrieve wrong 'op', and zering pages may
not be done for READ bio.

Fixes this issue by moving guard_bio_eod() after bio_set_op_attrs()
in submit_bh_wbc() so that bio_truncate() can always retrieve correct
op info.

Meantime remove the 'op' parameter from guard_bio_eod() because it isn't
used any more.

Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: linux-fsdevel@vger.kernel.org
Fixes: 85a8ce62 ("block: add bio_truncate to fix guard_bio_eod")
Signed-off-by: Ming Lei <ming.lei@redhat.com>

Fold in kerneldoc and bio_op() change.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The `connected` value for wired devices was not properly initialized,
it must be set to `true` upon creation, because wired devices do not
generate connection events.

When a raw client (the Steam Client) uses the device, the input device
is destroyed. Then, when the raw client finishes, it must be recreated.
But since the `connected` variable was false this never happended.
Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Merge tag 'amd-drm-fixes-5.5-2020-01-08' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.5-2020-01-08:

amdgpu:
- Stability fix for raven
- Reduce pixel encoding to if max clock is exceeded on HDMI
  to allow additional high res modes

UAPI:
- enable DRIVER_SYNCOBJ_TIMELINE for amdgpu
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108213649.5485-1-alexander.deucher@amd.com

mst: Fix NO_STOP_BIT bit offset (Wayne)
sun4i: Fix RGB_DIV clock min divider on old hardware (Chen-Yu)
fb_helper: Fix bits_per_pixel param set behavior to round up (Geert)

Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108205949.GA233273@art_vandelay

In my attempt to fix a memory leak, I introduced a double-free in the
pstore error path. Instead of trying to manage the allocation lifetime
between persistent_ram_new() and its callers, adjust the logic so
persistent_ram_new() always takes a kstrdup() copy, and leaves the
caller's allocation lifetime up to the caller. Therefore callers are
_always_ responsible for freeing their label. Before, it only needed
freeing when the prz itself failed to allocate, and not in any of the
other prz failure cases, which callers would have no visibility into,
which is the root design problem that lead to both the leak and now
double-free bugs.
Reported-by: Cengiz Can <cengiz@kernel.wtf>
Link: https://lore.kernel.org/lkml/d4ec59002ede4aaf9928c7f7526da87c@kernel.wtf
Fixes: 8df955a3 ("pstore/ram: Fix error-path memory leak in persistent_ram_new() callers")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>

The current 'tipc_wait_for_connect()' function does a wait-loop for the
condition 'sk->sk_state != TIPC_CONNECTING' to conclude if the socket
connecting has done. However, when the condition is met, it returns '0'
even in the case the connecting is actually failed, the socket state is
set to 'TIPC_DISCONNECTING' (e.g. when the server socket has closed..).
This results in a wrong return code for the 'connect()' call from user,
making it believe that the connection is established and go ahead with
building, sending a message, etc. but finally failed e.g. '-EPIPE'.

This commit fixes the issue by changing the wait condition to the
'tipc_sk_connected(sk)', so the function will return '0' only when the
connection is really established. Otherwise, either the socket 'sk_err'
if any or '-ETIMEDOUT'/'-EINTR' will be returned correspondingly.
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a socket is suddenly shutdown or released, it will reject all the
unreceived messages in its receive queue. This applies to a connected
socket too, whereas there is only one 'FIN' message required to be sent
back to its peer in this case.

In case there are many messages in the queue and/or some connections
with such messages are shutdown at the same time, the link layer will
easily get overflowed at the 'TIPC_SYSTEM_IMPORTANCE' backlog level
because of the message rejections. As a result, the link will be taken
down. Moreover, immediately when the link is re-established, the socket
layer can continue to reject the messages and the same issue happens...

The commit refactors the '__tipc_shutdown()' function to only send one
'FIN' in the situation mentioned above. For the connectionless case, it
is unavoidable but usually there is no rejections for such socket
messages because they are 'dest-droppable' by default.

In addition, the new code makes the other socket states clear
(e.g.'TIPC_LISTEN') and treats as a separate case to avoid misbehaving.
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Missing netns context in arp_tables, from Florian Westphal.

2) Underflow in flowtable reference counter, from wenxu.

3) Fix incorrect ethernet destination address in flowtable offload,
   from wenxu.

4) Check for status of neighbour entry, from wenxu.

5) Fix NAT port mangling, from wenxu.

6) Unbind callbacks from destroy path to cleanup hardware properly
   on flowtable removal.

7) Fix missing casting statistics timestamp, add nf_flowtable_time_stamp
   and use it.

8) NULL pointer exception when timeout argument is null in conntrack
   dccp and sctp protocol helpers, from Florian Westphal.

9) Possible nul-dereference in ipset with IPSET_ATTR_LINENO, also from
   Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The set uadt functions assume lineno is never NULL, but it is in
case of ip_set_utest().

syzkaller managed to generate a netlink message that calls this with
LINENO attr present:

general protection fault: 0000 [#1] PREEMPT SMP KASAN
RIP: 0010:hash_mac4_uadt+0x1bc/0x470 net/netfilter/ipset/ip_set_hash_mac.c:104
Call Trace:
 ip_set_utest+0x55b/0x890 net/netfilter/ipset/ip_set_core.c:1867
 nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
 nfnetlink_rcv+0x1ba/0x460 net/netfilter/nfnetlink.c:563

pass a dummy lineno storage, its easier than patching all set
implementations.

This seems to be a day-0 bug.

Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Reported-by: syzbot+34bd2369d38707f3f4a7@syzkaller.appspotmail.com
Fixes: a7b4f989 ("netfilter: ipset: IP set core support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The timeout pointer can be NULL which means we should modify the
per-nets timeout instead.

All do this, except sctp and dccp which instead give:

general protection fault: 0000 [#1] PREEMPT SMP KASAN
net/netfilter/nf_conntrack_proto_dccp.c:682
 ctnl_timeout_parse_policy+0x150/0x1d0 net/netfilter/nfnetlink_cttimeout.c:67
 cttimeout_default_set+0x150/0x1c0 net/netfilter/nfnetlink_cttimeout.c:368
 nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477

Reported-by: syzbot+46a4ad33f345d1dd346e@syzkaller.appspotmail.com
Fixes: c779e849 ("netfilter: conntrack: remove get_timeout() indirection")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

With -O3, gcc has found an actual unintialized variable stored
into an mmio register in two instances:

drivers/atm/eni.c: In function 'discard':
drivers/atm/eni.c:465:13: error: 'dma[1]' is used uninitialized in this function [-Werror=uninitialized]
   writel(dma[i*2+1],eni_dev->rx_dma+dma_wr*8+4);
             ^
drivers/atm/eni.c:465:13: error: 'dma[3]' is used uninitialized in this function [-Werror=uninitialized]

Change the code to always write zeroes instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>